Word2007 hangs after upgrade to Windows 7 64-bit

Similar Questions

• System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

  I use "Windows 8 preview version" for the last 4 months.

  I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
  It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
  I want to use internet on a system without the system get crashed, please help me solve this problem.
  I am using Dell Inspiron 15R

  The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

  BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

  The netio.sys is a Windows driver that is involved in the "networking."

  The process that crashes regularly is avgnsa.exe which is a process of AVG.

  I would say to uninstall AVG and see if the accidents to solve.

  He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

  If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

  http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

  If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.

• Portege M700 falls down after upgrading to Windows 7 32 bit

  Dear all,

  My portege M700 laptop played most of the reliable time.
  However, it was taken very slow sleep after a few iterations of sleep-wake, taking > 5 min.

  I have now installed Windows 7 32-bit, which works very well. Has no problem with the release of sleep. However, on 1-2 times per day now, I get a message that Explorer crashed and must restart. About once a week, the system crashes completely with a blue screen of windows (without core). Most of the time, in seconds to the time that the screen freezes, I hear the fan switch on at full speed (much faster that it never runs normally) and the case becomes hot enough.

  I installed the latest drivers for 32 bit Windows 7 on the site of Toshiba UK.

  Can someone help me to diagnose the cause of these accidents?

  Thank you very much

  Chris.

  Hello

  It is difficult to say what might cause this behavior strange system.
  But you said something about the hot deal and fans begins to spin faster

  It seems that the internal temperature of laptops increases to a higher level.
  A higher temperature may affect the RAM modules and this could be the reason why the system hangs and does not answer.

  What to say that you should check the Win 7 power management settings.
  There are many options that could decrease the performance of the processor and increase the cooling.
  In addition, you should check if the cooling fans are free of dust obstructed fans might not run properly and this would increase the temperature as well.

  Hope this helps you

• Cannot connect to Internet after upgrading to Windows 7 64-bit Aspire M5100

  I upgraded from Vista Home Premium 32-bit, Windows 7 Home Premium 64-bit. I have a Marvell yukon 88E8056 PCI-E Gigabit Ethernet Controller. I tried updating the driver, but it has yet to solve the problem. I am able to connect through a usb wireless adapter.

  I noticed someone had this problem with a M3100 and the solved the problem by replacing the Ethernet card. I hope that I don't have to do since I've upgraded to Windows 7 using an OEM version. As I understand it, you can change to any material after I installed the OEM version.

  When I ran the Windows 7 Upgrade Advisor there was compatibility issues: 1) the card Ethernet, 2) graphics card.

  He said go to the device manufacturer's website and download the latest version of the driver. I thought that's what I did, but it still doesn't work. I have all the 'exclamation points"in the Device Manager. Everything said that it works correctly.

  Maybe I'm not download the appropriate driver. Should I just go for the driver and the driver update rather than choose one myself and downloading?

  If I end up installing a new Ethernet card going to work?

  Any suggestions?

  Good. It's just to install and configure the new network card. If all goes well, assuming that Murphy does not, it should be easy sailing! Let me know how it goes.

• Reinstall Visio after upgrade to Windows 7 64 bit

  Hello everyone. I installed Windows 7-64 bit. My upgrade went without a hitch except to reinstall one of my Office programs. I am trying to reinstall Visio Professional 2003, however, my first legal installation disc is Visio 98. Windows 7-64 bit will not install this version, so I'm stuck without a track to upgrade in order to activate properly. How to work around this problem. I tried to join the team of Visio, but I see that they want to get my credit card on which I am not too happy to... Help... Please...

  Thank you.

  E-mail address is removed from the privacy *.

  I know it's late to this thread over 3 years, but I recently found this problem on the copy of my dad from win7 64.

  With success, I was able to install 4.5 Visio standard, Visio 5.0 update and upgrade Visio 2002.  Everything worked successfully on win7, but the older versions had some quirks to fix in the installation process for 2002 to see them on the hard drive and to recognize as valid evolutionary products.

  The main problem is that version visio 4.5 and 5.0 used an old 16-bit installshield Setup program.

  The applications themselves are 32-bit and will be running in compat for windows NT 4.0 mode in win7 64-bit.

  My solution was to get a program that will extract the old cab of installshield used on the cd files.

  The file to extract cd is called 'data.z' and you must check out it in a good location on your hard drive.

  I used the program Universal Extractor from the following site:

  http://legroom.NET/software/UniExtract

  the extraction method used was i3comp.

  Once the records from HD, I created a shortcut to the executable visio in the extracted folder, in the properties of the shortcut I went to the compatibility options and click on it to change the settings for all users.  Here, I did the program running under Windows NT 4.0 and run as administrator.

  I then tested successfully the Visio 4.5 and 5.0 with this method to ensure that any registry or ini file stuff needed by the installer of 2002 would be easier.

  After I checked they were running and working on win7 64, I put in the 2002 Update CD recently bought new by the amazon seller.

  Setup has found the copy to hard disk, and I told it to install over Visio 5.0 on hard disk folder.

  When I launched visio 2002, he asked to activate, I then just let my dad continue the activation process of Visio 2002 update because it was actually him who had bought and she belonged and was installed on his computer.

  He had worked for a couple of hours and finally had put on his machine virtual windows xp win7, but wanted on his real win7 64 bit installation.

  I had the chance to help her for about an hour, and it was enough time to understand the problem and get Visio 2002 working for him.

  I note that there is a point in the installation process when upgrade version wants to find the old copy to upgrade, he will try to get the hard disk and you will almost seem to be frozen, but the style hourglass turns the pointer of the mouse circle will be always moving.  As long as you wait outside it will be eventually find the older version installed.

  Finally, on my father's computer, there are more than 1 million files from different programs and documents to go, after about 5-6 minutes setup are the old copy and continued.

  After it's done only internet activation is required.

  Hope this helps someone.

• Runes of Magic will not play after upgrade to Windows 7 64-bit

  Have upgraded to window7 64 bit that I use now the 8 GB of ram

  Runes of Magic was playing on my old windows version but usually install a new

  Get message that windows could not find a version of the game, so I downloaded the patches for the game manually

  Game Launcher now returns but crashes after I selected the game

  Any help would be greatly appreciated

  Thank you

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the full error message or error code?

  I suggest to perform a clean boot, and then try to download and install the game and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note: Runes of Magic is compatible with Windows 7 64 bit

  Reference:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=runes%20Of%20Magic%20&OS=64-bit

  Note: If you still have the problem then I suggest you to contact the game manufacturer.

• Blu Ray does not work after upgrade to Windows 7 64-bit

  Hope someone can help with this problem. I found a lot of forum and users with similar problems but I can't solve this problem.

  I bought this HP Pavilion DV7-1055EA about 3 years ago the drive blu - ray one of the points of sale, it was loaded with Vista 32 bit. After making this computer has 4 GB of RAM instead of 3, I did a clean install of windows 7 64-bit. After which my Blu Ray player stopped working.

  When inserting a CD/DVD, the drive works fine and everything is as usual, however when insert a Blu Ray disc windows does not recognize the drive IE "drive is empty".

  Different things, I tried to set the inclusion of the problem, reflashing the BIOS, install the latest firmware, re - install the game media, installed PowerDVD but without any change in the symptoms.

  Can someone help with this problem? Well, I'm stuck on this one like blu ray readers are not my strong point in computers. Maybe HP (in their wisdom) printed a digital brand on the device which prevents him from being compatible with more recent versions of windows? I talked to HP however my warranty has expired I do not pay £15 for a fool to tell me to come back for win vista (which is the worst OS known to man kind) or that there is no solution available. Help, please?

  Hello

  After writing this last post, so I decided to download Nero Info Tool to look at information from drive etc.

  The program asked if I could put in a disc to test the speed of running, so I thought... what the hell I'll put in a blu - ray disc and see what happens.

  Next thing I know that running speed test took place then everything suddenly the blu ray kicks in life and he was here... smooth as the more calm waters, known for the kind of man... my blu ray film.

  Reboot the machine and now the blu - ray player works fine. Any idea on what just happened?

• Audio Cup after upgrading to Windows 7 64 bit

  I recently updated a workstation reasonably powerful BOXX made from Windows XP to Windows 7 64 bit.  The only thing that does not seem to have gone well refers to audio.  Any application I play audio, it cuts out / falls for about one second every 3 to 10 seconds.  In Adobe first CC Pro and Adobe Audition CC, sounds cuts out.  When I play a video directly on YouTube, he stops and sometimes even lets out a nervous cry, so I don't think its a problem to Adobe.

  Workstation BOXX, with a NVIDIA Quadro K4200 graphics card.  Processors: Two X 5550 2.67 GHz; 12 GB OF RAM.

  Device Manager shows two audio devices / drivers: NVIDIA High Definition Audio; and a Realtek High Definition Audio.

  In case there was a conflict, but it makes no difference, I disabled the NVIDIA driver.  Always cut.

  Interest, sometimes when I have audio playback in Adobe Audition CC on the audio timeline, I can see the time meter stall periodically and restart, not necessarily in harmony with the cuts.  The end of a two-minute audio current reading, audio play is over, but the marker of time has not reached the end of the audio waveform display and moves again.

  None of the above happened before the upgrade to Windows 7.  Thanks for your suggestions, you can provide.

  This sounds like a driver issue, did you test if your hardware is compatible with Windows 64-bit?

  http://Windows.Microsoft.com/en-GB/Windows/Update-driver-hardware-ISN

• Pilot missing after upgrade to Windows 7 64-bit on dell xps 1340

  Installed Windows 7 64-bit on Dell XPS 1340. Most of the drivers/hardware work. A system of still unidentified Base and Windows update device / driver downloads dell cannot fix.
  State of the device - drivers are not installed (code 28)

  name of the physical device object - NTPNP_PCI0024 to bus PCI 1, device 7, function 3

  Hardware PCI/VEN_1180 & DEV_0592 & SUBSYS_02711028 & REV_12 ID
  etc.

  Help, please. Thank you

  Hello
  Here is the site of Dell support for your model. You will find all the drivers for Windows7 64 bit.

  Hardware PCI/VEN_1180 & DEV_0592 & SUBSYS_02711028 & REV_12 ID
  It is the Ricoh card reader .

  Driver so that it is on your article of chipset support site.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Daily hangs after upgrade to Windows 8

  Hey there,

  So since I update of Windows 8 (new facility) my computer hangs regularly while executing tasks, such as browsing the web, etc.
  A BSOD is not, on the contrary, the screen becomes blue light but with thousands of lines of the artifact.
  It looks like this (not my picture):
  http://CDN.overclock.NET/d/D8/900x900px-LL-d8a94907_IMG_1059.JPEG

  I think it's a GPU driver problem, but I tried the different driver version and it still happens. I have a lot of discharge etc. reports that were sent to Microsoft, but who knows if that does nothing. Any ideas on how to mitigate the problem?

  Thank you!

  simple little program could give you an idea of what is causing that..,.

  http://www.resplendence.com/WhoCrashed

• No sound after upgrading to windows 7 32 bit to 64 bit

  A few months ago I upgraded from 32-bit windows 7 to 64-bit windows 7. After update there is no sound coming through my headphones or speakers and the icon at the bottom right of his says no audio output device is installed. I have an external sound card...

  You will need to provide more detailed information to allow a person to better help you, brands and models, etc. specific error messages/codes.

  However, have you checked with the audio device manufacturer to see if there are any W7 64 bit specific to install drivers that are needed for this? Check on the devices support site to see.

  Alternatively, it - http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 can help.

• HP Pavilion dv7 7077ez wireless for windows 8 does not work after upgrade to windows 7 64 bit

  I have the broadcom card. I have try all the drivers and I still cant install drivers I see on household also setup.rul 342 of the installation error wireless start won't start. What should do?

  Hi Emilinator,

  More than likely HP won't to material support for Windows 8 on any system purchased before October 1, 2011.  Most of the Windows 7 drivers work in Windows 8.

  You can try this pagewhich provides measures to solve the problems of connection to broadband for Windows 8.

  Check out this page to see if your computer has been tested by HP with Windows 8.

  You can run the Upgrade Wizard, which will scan your PC and report on what is currently installed on your PC is compatible with Windows 8.  This guide was updated for Windows 8 provides lots of information which is needed for all those planning the upgrade.

  Good luck

• Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

  Hey!

  I can't get my card reader works after upgrade to windows 10 64-bit...

  Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

  "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

  Have you ever tried the Realtek website?

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO