Workstation HP Z420: Z420 Workstation troubleshooting in Windows Installer

Similar Questions

• Can I upgrade my HP xw8200 Workstation to use windows 7?

  Can I upgrade my HP xw8200 Workstation to use windows 7?

  Hello:

  You should be able to run W7 64-bit on your PC, since Vista business is the operating system recommended by HP. normally if a PC can run Vista, it can work in W7.

  For a nice report of its ability to run W7, download and run the Advisor of W7 upgrade on the link below. Connect all devices to your PC, so it will analyze these devices as well as for the ability of W7.

  Here is the link to the download page for the W7 Upgrade Advisor:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Paul

• How to open the system maintenance Troubleshooter in windows vista

  How to open the system maintenance Troubleshooter in windows vista?

  Hello

  Please be informed that Troubleshooting maintenance system was introduced from Windows 7.

  However, you can run the fixit mentioned below for Vista.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  You can take a look at solving the problems of system maintenance in windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

  For more information, please visit the links below.

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Optimize Windows Vista for better performance.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For the anti-virus scanning:

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Windows Installer / Installshield corrupted on W2k3?

  Greetings,

  At a customer's site is a Windows Server 2003 R2, without Active Directory box, mostly as a file server for the workstations with the exception of multi-user 2011 Peachtree, which is accessible by three remote users that RDP to the server and not always at the same time.

  The customer asked us to step of the updated 2011 of Peachtree with Sage 50 Premium 2013, but the Suppression 'applications', the program seems to have stopped progressing.  We have finished the process of facility after thirty minutes, restarted the server and called technical support for Sage.  They suspected a bad CD, so we sent to the download.  Same thing.  This time we tried to uninstall Peachtree 2011 before installing Sage 50, only to receive a "Error 1628'.  Research on this error led us to clear the registry entries that indicate a current installation to run.  Yet once the server has rebooted.  We called Sage back support - they suspected that the Installshield engine was damaged, but was beyond their ability to support.

  Installation of sage 50 remained suspended at the same stage, Peachtree 2011 would not uninstall, so I tried to clean it with Revo Uninstaller, remove two entries of the program using MSI cleanup and rebuild the engine Installshield version 10.5 - the Sage 50 uses during the installation.  Even the repair of Installshield utility hung during installation.

  Does anyone have suggestions on reclamation a failed database of Windows Installer or Installshield engine, so sloppy that even the tools to fix do not work?

  Thank you in advance,
  Isaac Grover

  Hi Isaac Grover.

  Thanks for posting your question in the Microsoft Community!

  The question you have posted include Windows Server 2003 R2 box it is therefore better for the TechNet forums. I suggest you post the question on the below mentioned link to help:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.
  Let us know if you face issue of Windows in the future. We will be happy to help you!

• Can I use the same product key in a virtual machine that I use for the Windows installation that hosts the VM?

  I have a valid Windows 7 Professional installation as well as a copy of VMWare Workstation running on Windows 7. I would like to install a VM Windows 7 that I can "break" without worrying about my host system. Can I use the same product key for the virtual machine that I currently use on the host system, or do I have to buy a different product key for the virtual machine?

  Thank you!

  No, you will need to purchase an additional license. The virtual machine is considered to be a separate computer.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• There is a problem with this Windows Installer package. A program required for this install to complete could not be run Windows 10

  There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update

  Repair Apple Software Update of programs and features, Control Panel, and then try again.

  If not for general advice see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I tried to update iTunes on Windows 10, now, I get the error "there is a problem with this Windows Installer Package".

  Hello

  I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
  I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
  I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.

  Any of you have an idea what can do?
  Thank you!

  Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Cannot install the update - Windows 7 64 bit (windows installer error - program might not work)

  I am running Windows 7 Home Premium 64-bit. I'm unable to install updates for iTunes (last successful update was my PC itunes 12.2.2.25 64 bit). The error message I get when you try to run the downloaded exe file from apple is: 'there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ". Please indicate what the problem is and how I can fix. I am not able to backup or synchronize my devices (for example iphone 6 sec) over to my PC as it is said that iTunes must be 12.3 or higher. Thank you - Bryan

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• When I install iTunes Windows Installer closes

  I just installed Windows 10 Pro x 64 and am trying to install iTunes, but every time I try to install the windows installer just closes. All I see is the Green loading bar when you open the executable first, but this is when it crashes.

  Help is appreciated,

  Sam

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!

• When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

  Original title: I'm loading Quciktime.

  When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

  Hi Tonyb13apb,

  ·         The issue is limited only during the installation of QuickTime?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Uninstall and reinstall QuickTime and check.

  http://support.Apple.com/kb/HT1925

   

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, select run.

  b. type msconfigand click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer.

  If the problem persists, you can contact Apple support for more help and information.

  http://support.Apple.com/kb/HE57

  Let us know if it helps.

• The Windows Installer can't find hips_cc.msi

  When I log on my Win XP PC Windows install comes up that tries to install a program in non-descript and says that it can't find hips_cc.msi

  I'm trying to cancel it, but in the habit of Cancel. In the meantime, XP starts and seems to work OK until I'm going to install a program. When I do this Setup program Windows said I can't install it because another installation is in progress and complete the installation and restart the installation again later. I can't because I can't access through my office windows installer. Then when I go to shut down my PC, it used to close because Windows Installer is still looking for this bloody file! hips_ss.msi!

  I hope you can come up with an answer to save me to do a complete reinstallation of Windows

  Hi Doug,.

  I'm sorry to know you face issues with your computer. Your description, it seems like you get a hips_cc.msi error when you log on to your Windows XP computer.

  This file seems related to the CA antivirus program. You have this program installed on your computer?

  If so, the program works is perhaps not as expected. I suggest that you even uninstall it and reinstall it. You can also contact CA support for the same thing.

  See also this article on how to uninstall a program from your computer.

  If it does not, then answer with the State for we can help you troubleshoot further.

  Thank you!

• Should I delete these files appearing in Windows Installer Cleanup?

  Unknown programs:

  -Copy [43.1.5.00]

  -CueTour [43.1.5.00]
  -Destinations [43.1.5.00]
  -Director [43.1.5.00]
  -DocProc [4.0.0]

  -DigiImg [2.0.0]

  -DocuCom PDF core library [4.21]
  -InstantShare [4.0.0.40]
  -Unload [4.0.0]

  FWIW... Utility Windows Install Cleanup (MSICUU2.exe)
  is no longer supported

  See the following article:

  (2438651) how to troubleshoot problems during installation
  or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

• Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

  Original title: my "Windows Installer is not installed properly.

  I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Error message "Could access the Windows Installer Service" when you install the application

  Hope the helps of information.

• Windows Installer error there is a problem with this windows package install. a program run as part of the set up did not complete as expected "during the installation of Itunes

  Original title: problem WIndows Installer to install the latest version of i tunes

  When I try to install the latest I tunes version 10, I get a message "there is a problem with this windows package installer. a program run as part of the set up did not complete as expected "the downloads version, but will not be installed."  How can I fix?  I have an earlier version, but I need to update to use my i pad.

  Hello

  You can try the steps of troubleshooting provided in the link below and check if the problem persists.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  To get help on the issue, you can get in touch with support for ITunes.

  http://www.Apple.com/support/iTunes/