Worth an another 2 GB of RAM?

Similar Questions

• Kernel Panic #2 and another batch of bad RAM?

  OKAY this is getting annoying. A few days ago, I posted about a previous kernel panic and if it linked to the bad RAM.

  My question has been answered by Illaass and Grant Bennet-Alder, the culprit in my kernel panic was bad RAM as Illaass noted

  The expression '6 banks to report errors' panic report almost always means bad RAM.

  The key is to several banks of error reports.

  Also the phrase "Machine Check" usually means a hardware problem

  I got the replacement RAM this morning and installed, the system showed as having 12 GB for about two hours. I got a Kernel Panic OTHER then when I rebooted my machine showed as having 8 GB of RAM once again, the two new modules have been installed would not be saved. -I opened the side of my machine to instept memory, I was surpised to find the error LED on one of the DIMMs I had installed just a few hours before.

  I have therefore three options in front of me.

  1. I received a second faulty module in the modules that I replaced, but what is the probability that I would get two modules of the 'bad' like this.

  2. the second is of course the DIMM location on riser from the Mac Pro RAM "kills" any module installed in it. (I don't know what is the probability of this)

  So I contacted the dealer that I bought the memory with a few basic troubleshooting I've been able to identify the faulty module and remove (and the other 'good' module of my system), with the deleted modules my system boots and behaves correctly, with replacement modules in my system boots (slower than normal) and new modules do not even register System Profiler , they show that slots "empty."

  I took my machine to my local provider of Apple and asked their opinion, they said that it is very unlikely that the slot is the question and I just received two faulty memory sticks.

  I contacted the retailer and they will send me another one module replacement, but I don't know what the probability of exactly the same thing repeats again and again.

  I also have the details of my second kernel panic which I attach to this message in a minute, I'm open to suggestions as to what can happen.

  Fri Jun 17 14:13:28 2016

  panic (cpu 0 0x8a1d1e8b appellant): "error memory Fbd incorrigible detected. FERR_NF = 0 x 00002000, NERR_NF is 0x02002021\n"@/SourceCache/AppleMCEDriver/AppleMCEDriver-119.4.0/AppleMCEDriver .cpp:947

  Backtrace (CPU 0), Frame: return address (4 potential args on stack)

  0x10bc58: 0x21b837 (0x5dd7fc 0x10bc8c 0x223ce1 0x0)

  0x10bca8: 0x8a1d1e8b (0x8a1d290c 0 x 2000 x 0 2002021 0x8100a4)

  0x10bd18: 0x8a1d215d (0 x 12654500 0 x 12654500 0 x 2 0 x 820044)

  0x10bd98: 0x7fda0a50 (0 x 12654500 0 0 0x117f1880 x 0 x 0)

  0x10bdc8: 0x7fd9fd09 (0x1141f200 0 x 0 0 x 0 0x1c)

  0x10bde8: 0x7fdaeebc (0x1c 0x10be5c 0 x 8 0x7fdac5f0)

  0x10be18: 0x7fdaf0be (0x117d391c 17 0x1141f53e 0 x 0 x 0)

  0x10be78: 0x7fdb662e (0x112ecd28 0x10bec8 0x10bef8 0x0)

  0x10be98: 0x56ac20 (0x112ecd28 0 0 0x112cad80 x 0 x 0)

  0x10bee8: 0x7ffad5bb (0x1141f280 0 0 0x1141f280 x 0 x 0)

  0x10bf18: 0x7fd93213 (0x117c8600 0 x 0 0 x 0 0 x 49)

  0x10bf38: 0x7fd9e911 (0 x 49 0 0 0x10bf78 x 0 x 0)

  0x10bf58: 0x580d96 (0x11329b80 0 x 0 0x11329f80 0 x 49)

  0x10bf78: 0x2ab432 (0 x 49 0x8941ba50 0x1c8db 0 x 1)

  0x10bfd8: 0x2a1c2e (0x8941ba50 0x2a2a00 0 x 0 0x2a2a5b)

  0x8941bae8: 0x225bba (0x84bf3c 0x2d6586f7 0x85c 0x84bf28)

  0x8941bb48: 0x22698c (0 x 1 0x141873d4 0x112c4c58 0x85c)

  0x8941bbb8: 0x2275b0 (0x141873f0 0x141873f0 0x8941bc18 0 x 233203)

  0x8941bc28: 0 x 227654 (0 x 0 0 x 0 0 x 0 0 x 0)

  0x8941bc48: 0x2a1422 (0 x 0 0 x 0 0xdd 0 x 80000002)

  0x8941bcd8: 0x260c62 (0x2199ede8 0 0 0x2a45e3 x 0 x 0)

  0x8941bde8: 0x25847e (0x8941bf40 0x63e14000 0xd2a 0 x 3)

  0x8941bf38: 0x2ab83c (0x121d5d74 0x63e14000 0xd2a 0 x 3)

  0x8941bfc8: 0x2a18da (14184204 x 0 0 x 0 0 x 10 0 x 0)

  Extensions of kernel in trace (with dependencies):

  com.apple.driver.AppleMCEDriver (1.1.9) @0x8a1ce000-> 0x8a1d3fff

  dependency: com.apple.iokit.IOACPIFamily (1.3.0) @0x7fad4000

  com.apple.driver.AppleAPIC (1.4) @0x7ffac000-> 0x7ffaefff

  com.apple.driver.AppleACPIPlatform (1.3.6) @0x7fd91000-> 0x7fdd3fff

  dependency: com.apple.iokit.IOACPIFamily (1.3.0) @0x7fad4000

  dependency: com.apple.iokit.IOPCIFamily (2.6.5) @0x7fcda000

• HP 15-g049AU: can I add an another 4 GB of RAM and a 256 GB of SSD on Hp 15-g049AU.

  I just bought the HP 15-g049AU and I'm having some confusion I wanted to delete. I want to know if I can add another 4 GB RAM memory to my HP 15-g049AU. And, if I can replace my HARD drive with another 256 GB SSD hard drive.

  If it can happen then, HP service centers will be will install them for me.  I want to say, if I buy the RAM and SSD and take my laptop to a service center, then they will help me. If they do, then what will be the price to get this?

  Your laptop supports a maximum of 8 GB. There is a single soDIMM memory slot that is available to the guests.

  You can replace the hard drive of spinner legacy with a 256 GB SSD. I highly recommend the upgrade by using the method of cloning with a sata to usb cable. You can make an image recovery factory with the usb recovery media that you have created now.

  HP Service Centers do not perform the upgrade work. You wil perform have the upgrade on your own or pay a shop laptop to do it for you.

• "Adding another 8 GB of ram would improve computer performance of H8 - 1520t.

  I have a HP h8 - 1520 computer t with a bar of ram of memory DIMM DDR - 1600 GB 8.  My more demanding program is Microsoft Flight Simulator X with acceleration.

  Kitco wrote:

  Have a CPU i7-3770 3.4 and a Nvidia GTX 660 1.5 GB DDR5 video card. These are very good components.  They must be good with MS FltSim.

  I thought I could just use the 8 GB of ram I have (a stick) and then install a more accurate memory stick live, for a total of 16 GB. Fix?  As I said, if you can be sure that the new 8 GB stick of memory is compatible with the existing 8 GB, then it is not a problem.  Just make sure that they are compatible, or you've lost your money.

  If your problem is solved, please click "accept as a Solution.

• Upgradation of RAM in the model of 2110TU

  Hello

  I bought

  HP Pavilion dv4-2110tu laptop. Posses IT core i3 and 4 GB of RAM. Now, I want to upgrade the RAM. I want another 4 GB of RAM, as well as the machine will have 8 GB of RAM that will solv my goal. My questions are these.

  1. this laptop model does support up to 8 GB or 6 GB of RAM as it is 32-bit.

  2. how much more RAM slots are present.

  3. should I buy (4 GB + 2 GB) RAM

  4 SLEEP I will buy 2 4 GB of RAM

  5. which company best RAM manufacturer fits into this model.

  6. Please let me know model RAM and details

  Sunil_su45 wrote:
  

  Hello

  I bought

  HP Pavilion dv4-2110tu laptop. Posses IT core i3 and 4 GB of RAM. Now, I want to upgrade the RAM. I want another 4 GB of RAM, as well as the machine will have 8 GB of RAM that will solv my goal. My questions are these.

  1. this laptop model does support up to 8 GB or 6 GB of RAM as it is 32-bit. A 32-bit OS supports up to 3.25 GB of physical RAM installed. Your laptop supports up to 8 GB, but if installed the OS installed alone will see @3.25 f.

  2. how much more RAM slots are present. Two soDIMM slots

  3. should I buy (4 GB + 2 GB) RAM

  4 SLEEP I will buy 2 4 GB of RAM

  5. which company best RAM manufacturer fits into this model.

  6. Please let me know model RAM and details

  If you want to use more RAM, then you will need to install a 64-bit operating system. It's not worth spending money on more RAM if your operating system is unable to use it.

• Upgrade of RAM for Satellite Pro U200

  I just bought a U200 Pro of the Satellite with 512 MB ram and I want to improve, but I don't know what type of ram to the order.
  Will be of this form: Kingston 1 GB 533 MHz (4200) DDR2 SODIMM, 200 pins, CL4?

  Hello

  Just FYI: this device can handle with max 2 GB of RAM and the compatible and tested modules memory vivid are DDR2-533 512 MB (PA3412U - 2 M 51) and DDR2-533 1 GB (PA3411U-2M1G).

  If your device has 512 MB of RAM, I recommend you to put another 1 GB of RAM and I think that the device will work like crazy. ;)

• Problem upgrading RAM on old Satellite 4600

  Hi guys

  I wonder if anyone can help me? I have an old Satellite 4600 (not sure what series that is!). It has 128 MB of RAM. I added an another 128 MB of RAM, but it records still only 128 meg. I spent the round modules, always only 128 MEG. I tried even to each module right in the slot A, and then just to location B. Whenever he recorded 128 Meg, so I know that the two slots are working and two modules work, but it will not record together as 256!

  I checked in the BIOS and only 128 in there too. Help, please
  Thank you
  Dave

  Hello

  We start with some basic on this old book info.

  To check first please bottom side of your laptop and let us know if you have satellite or Satellite Pro. At your old laptop part number that starts with PS460E?

  In any case this model can be improved up to 512 MB
  The compatible RAM modules are:
  PA3003U - 1 M 03 32MB MEMORY KIT
  PA3004U - 1 M 06 64 MB MEMORY KIT
  PA3005U - 1 M 12 128 MB MEMORY KIT
  KIT MEMORY OF 256 MB PA3069U - 1 M 25

  Have you used compatible RAM PA3005U - 1 M 12 for upgrade?

• Satellite Pro A120 (PSAC0E) does not start after upgrading RAM

  Hello

  I hope someone can help me here, I recently bought a Satellite Pro A120 (PSAC0E) and decided to upgrade the RAM. I bought a stick of 512 MB of curries with the following specifications: DDR PC2700 200-pin 333 Mhz SODIMM (64 x 64).

  However, the first problem I encountered was an alignment problem. A little effort and handling solved this, but after you insert the RAM into the available slot, the computer laptop wouldn't boot, and instead, I had the flashing sequence on the LED from 2,3,3.

  I was told it might be a problem matching, then tried to remove the original RAM and booting with just the new stick, still the same error. I tried it in the slots and still no joy. It starts very well with the original 256 MB of RAM, but refuses to take the new RAM.

  Are there any known issues? Can anyone suggest something that I can do wrong? I followed the usual steps of upgrade to remove all power cables and the battery before the upgrade, but still no joy.

  Hoping that someone is able to help!

  Hi James

  You simply have bad memory modules and is not a compatible uses.

  > the first problem I encountered was an alignment problem. A little effort and handling solved this,

  This should not happen! The right modules can be inserted without any problem of alignment!
  Handling can damage the module!

  In my opinion, you should use another and supported the RAM module.

  To my knowledge, you can use the PA3512U-1M1G (DDR2-667 1 GB Memory Kit) or (PA3411U-2M1G) DDR2-533 1 GB
  The two should be compatible.

• Satellite L30-101: confused about what DDR2 RAM

  I want to set up an another 512 k of RAM DDR 2 but am confused because there are many kinds.

  I was thinking about the Kingston Value RAM. -
  512 MB - SO DIMM 200 pin - DDR II
  Upgrade to generic Type
  DDR II SDRAM technology
  Factor of form SO DIMM 200-pin
  Memory speed 533 MHz (PC2-4200)
  Verifying the integrity of data Non - ECC
  CASE Latency CL4
  Features without buffer memory
  Power voltage 1.8 V
  Lead plating gold
  MFG Part No.: KVR533D2S4/512

  Thanks a lot for any advice.

  Take a look at this page
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28694&ft=m&St=3

  but the Kingston modules are really nice

• HP Pavilion Slimline S5 - 1050d: Upgrade of RAM - single channel memory

  
  

  Hey, I want to just update. I installed another 4 GB of RAM with the same features (I decided to buy online).

  It works and BIOS shows two-channel after 2 slots taken.

  So, I guess he showed single channel because only simple slot taken.

• Satellite A100-220: Problem with RAM

  Hello
  I recently bought new RAM (Kingston 1 GB PC2 5300). Before, I had same Kingston memory more initially 256 MB. When I installed the new RAM, replacing the old, the machine does not run. It stops after 3 seconds. Is there a solution to have 2 GB of RAM? I also noticed, this computer does not work when the only Kingston RAM is installed...

  Greetings,
  Michal

  Post edited by: michalmet

  Hello

  thought the newly purchased RAM might be defective? If I were you I would do the following: return the RAM where you´ve bought and take another. Check the RAM in both slots and give a few short comments what happened...

  See you soon

• Upgrade memory satellite A110-103 - the Bios shows only 1 GB of RAM

  {color: #000000} Dear Forum Toshiba,

  I own a Toshiba Satellite A110-103 (PSABE6) bought in 2006 of the Belgium.
  I have trouble about an upgrade of RAM for this laptop. The laptop was originally a Samsung 512 MB of RAM.
  I tried to upgrade the RAM to its maximum capaity supported 2 GB.
  I bought and installed 2 Kingstone SODIMM 1 GB Value Ram DDR2 PC2 4300 units compatible with the laptop, but

  in the BIOS, I see only 1 GB of RAM.
  I tested each RAM separately and they work very well. The problem is that when I install in my

  locations of the laptop, my BIOS sees no Ram.Instead 2 GB 2 GB, it shows only 1 GB. I updated my BIOS for more later

  version 1.70 (for XP), but the laptop continues to show only 1 GB.

  I tested the RAM separately:
  -inserted only 1 stick in the drive and the pc started ok showing 1 GB of RAM
  -then I inserted the same stick in another location and it also worked well showing 1 GB of RAM
  - then I checked another unit of the RAM in the same way and worked well
  -When I try to put 1 GB of Ram and the old 512 MB RAm the BIOS correctly showed the new value of 1.5 GB
  -i also checked the other 1 GB of ram and the old 512 MB of ram and showed good again in the Bios with the value of 1.5 GB
  - but when I tried to put the 2 ram set units to obtain the BIOS only detected 1 GB 2 GB.

  Here's the description detailed 1 GB modules that I try to install:

  SLOT #1
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Reference number: 9905293 - 0.14A00LF
  Serial number: 6ACC0C46
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  SLOT #2
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Serial number: AD0CCE10
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  What should I do?
  Help, please!

  It IS concerning.
  Marius Militarescu

  [email protected]

  {color}

  I think the problem is that the two s of RAM are not compatible, but it is not explained to me because use you two identical modules.

  In your case I return the RAM to the computer dealer and say the modules work together in your notebook, but your laptop definitely supports 2 GB of RAM.

  I think that there is no other way because you have updated your BIOS to the latest version.
  Here is the part number for RAM Toshiba compatible:
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Satellite L30-113 does not recognize the two modules DIMM RAM

  Hello

  I have a Toshiba laptop Satellite L30 113.
  It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
  It's DDR2 553 MHZ (PC4200.

  The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

  Did I miss something?
  They should be the same size as in the bad old days?
  What is going on?

  Thank you

  Adam

  > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
  Seems that the two RAM modules are not completely compatible...
  I've read several times on these issues and to be honest it s are not uncommon

  I advise you to buy two identical RAM modules ad then to try again

  I'm afraid there is no other solution for your problem of m.

• Satellite 5105-s901: what RAM should I use for replacement

  Toshiba Satellite 5105-s901
  P2.0, 15, 512, 60, RW/DV, WL, BT, 64V
  PART NO. PS511U-0P1RSXZ
  SERIAL NUMBER 72065321PU-0

  Dear Sir/Madam,
  5 years ago, that I bought in the city of St. Petersburg mentioned above for laptop. I am
  professional programmer, Geologist, Geophysicist, mathematician.

  All this time, since I bought this laptop - I am pleased with him. Two other laptops, I bought over the last two years, were different from Toshiba, just in case
  port USB type, but none of the Dell could beat performance of Toshiba.

  Last month, in my Toshiba laptop, a SODIMM 512 MB PC2100 DDR SDRAM chip grilled and is broken down. I just can't find this type of RAM in the retail and online stores.

  Where to buy, to replace him.
  What should I do? What can I do? I got into the habit of my Toshiba already and can't get along without him.

  Need me an another 512 MB of RAM.
  Everything else - satisfies me.
  Really, truly yours, with kind regards and best wishes.
  Nikolai

  Hello

  Memory modules can be purchased and ordered from the approved maintainer Toshiba in your country.

  What you need are the right module specifications!
  You can also buy every common dealer/laptop modules.
  Google for some online offers!

  Satellite 5105-S901 supports PC2100 200 pin SODIMM (266 MHz) DDR modules. Check out this page!
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6112&ft=m&St=3

  Good luck

• Is it useful to 512 MB of RAM to 2 GB - Equium L20

  I Equium L20-198 that have Intel Celeron M 370 / 1 Mb L2 cache and 512 RAM. I was wondering is it worth to upgrade to 2 GB RAM to increase performance in 3D using programs such as Max and Auto CAD 3D with this Celeron processor?

  This update is going to be effective in terms of operation of the system faster?

  For upgrade of RAM is without any reasonable doubt, and with more RAM your laptop will work much better and faster. I use all the apps but with 2 GB of RAM, working with these applications will be much better. The tools everything you need for the operations of the 3D and calculation skills will run much faster than before.