Wrong side of Windows 7 second monitor.

Similar Questions

• Installed Windows 7 - Second monitor not detected

  So I just installed Windows 7 Ultimate (x 64) and everything that happened very well, but my second monitor is not detected. I am running Windows Vista and it worked but since I updated it stopped working, I tried 3 different monitors and have failed to update my drivers.

  Hey Zei,

  You need to update your video driver. In this case, you can contact your manufacturer to have updated.

  Thank you.

• Dell 8 with Windows 8.1 place - help! -Wrong selected Second monitor only

  Hello community! :

  I'm in desperate here.  I tried to get my Widi to interact with my TV so I could broadcast a film... and he did not communicate.  So, as the rocket door in mind that I'm... I started to choose each display option (two monitors, extended display and then second monitor only).  When I chose "second monitor only" well, as I had no second monitor to extend to the... I completely lost the video feature... now I can't tell if my tablet is enabled, disabled, what screen is on, etc.  I don't even know if it works.  I tried all the function keys with a wireless keyboard that I have, I tried control/alt/delete to reboot, tried to turn off and restart but nothing... can't even say if its enabled or disabled.  It started last night.  I plugged in to charge overnight and hope maybe he would zero or something... but no dice.  Same thing today.  At one point last night after losing the video features and after pressing a lot too many buttons on the keyboard... I heard some orders from the speaker as a sort of handicap help but then he disappeared and nothing more.  I was hoping there would be a key like FN F4 combination or something I could press to return to the PC only.  I tried the Windows key and P..but nothing happened.  Any help would be greatly appreciated.  Thank you.

  St. Lamar:

  I learned to never say never and never say always.  Windows has not reinstated the return... where the problem I had.  And no reboot, long hand on the power button, ctrl/alt/del or any other method of restart seemed to work.  Believe me... I tried these obvious things thinking he should be back... but he wouldn't even restart.  Work with any computer in the dark isn't easy... the only thing you can use is the keyboard... so my thoughts were to use the keyboard commands.  The keyboard command to bring up the menu that allows you to switch between monitors is the windows key and the "P"... I tried several times... but he still do nothing.

  I post the same question on forum Windows 8 and got a response from a user who was told to use the windows and 'p' key, then wait a couple seconds and then press "enter" as if the screen was on, these commands should bring up the menu and then the default would be the 'screen of the PC only"and hit then"enter"would complement the selection back to the tablet screen.  I fiddled with that for a minute or two and still no dice.  Because I have no screen and after so many keys and trying to restart... it's anyone guess what my computer screen was in.  But then I thought, maybe the default selection was not "Just the PC screen"... so I thought maybe if I tried the windows key and 'P', then use my arrow keys and press on enter... maybe I could bring it back like that.  Well after several attempts... I guess I got the right of association and it has actually come back.

  Thanks for your advice... and you reply to my message.

• InDesign drop down sub menus appear on the wrong side on the second monitor

  Hello, this problem occurs only with Indesign, only on my second monitor. His frustration at having to keep my 3 inches on the screen toolbar just to make sure that I can use my tools. Everyone race in this issue?

  Im working on a Mac running the latest updates of El Capitan and a version more to update to indesign CC (from 21/06/16)

  Thanks for your help.

  

  Hi Jordan,.

  I was able to reproduce the problem with Id 11.4.

  Connect a bug for the same thing.

  Thanks for bringing it to our notice.

  Concerning

  Afonso

• Second monitor not detected Windows 8

  Hi all

  The title pretty much everything said. Windows 8, two monitors to flat screen of ACER, HP pc, worked fine. I went to the control panel and although both monitors are on and work the 2nd is not detected. By clicking on "detect" a small window shows "another view undetected."
  The display on the second monitor as I said is on, but the mouse pointer does not move on the 2nd monitor and my desktop icons that were there is now on my 1st monitor. I tried to update the software for graphics card and monitor software as well, both are up to date.
  I tried to contact Microsoft Support, but I guess that there was a problem of mass with the update because I can't seem to online or over the phone.
  I tried to restore the computer to its last restore point, but that did not help.

  Can anyone suggest a solution?

  Thank you very much

  Original title: update 2nd monitor is not recognized after the last windows of nights.

  CORRECTION *.

  Reinstall the drivers worked. I didn't know what I had to do was desempilement monitors and place them side by side in the Panel. (Right-click on the display, the screen resolution, drag a monitor so that it is next to each other instead of one on top of the other)
  There is just a nut loose on the keyboard here. (ME)
  Thanks for your help.

• EliteBook 840 G1 and 2013 UltraSlim Dock with dual only monitors Windows 8.1 no second monitor

  My company recently purchased HP EliteBook 840 G1 laptops with discrete graphics.  Alongside this, we use the Dock UltraSlim 2013 with dual monitors HP LV2311 connected using HP DisplayPort / DVI adapters.

  8.1 Windows displays only a single monitor, that the second monitor is not available.  I can try to cover both monitors for a resolution fo 3840 x 1080, but when I try to do just the display reverts to the poster in mirror.

  I can use the DisplayPort on the side of my laptop and just a single DisplayPort on the platform and the OS will see both monitors.

  Please advise, it is unnecessary to have a dock with double DisplayPorts which cannot display two monitors with them.

  Yes the problem really existed with the original HP driver and that Microsoft installs by default.  HP released a newer driver for 8.1.

• Gigaframe L80 - Windows doesn't recognize it as a second monitor

  Hello

  I have a Toshiba Gigaframe L80 but is not fully functional.
  Windows doesn't recognize it as a secondary monitor so I can't extend the desktop in the framework.
  Only works in clone mode.

  I tested it on 2 computers according to the manual and the addon, I installed the .NET 2.0 (and 3.0) and I use the software/driver that comes in the box, but it is not recognized and is not shown in display properties.

  Can you help me?
  Is there a driver/software/firmware for the L80 was updated to fix?

  Anyone with the same problem?

  Hello

  I found this info:

  Sub visualization allows the Gigaframe to act as a second monitor for your PC
  To activate the view Sub follow these steps:
  (1) install subview on the laptop.
  (2) in the main menu of gigaframe select settings, then press OK
  (3) select subview and press OK
  (4) select and press OK. Now the Gigaframe is in display Sub mode and is not operable.
  (5) connect the GigaFrame to your PC with the supplied USB cable
  (6) run the subview on your PC software
  (7) the display of Sub pop window, display the current screen display in the gigaframe

  By activating the function void View the willing Gigaframe of two display modes:
  Scope and the Clone mode.

  To assign the suffixe_etendu mode_ Gigaframe follow these steps:
  (1) right click on the desktop and select properties from the menu
  (2) in the display properties panel select the settings tab
  (3) under the view drop-down list, select 2. default monitor on Subview
  (4) check the option extend my Windows desktop on this monitor and the bottom of the settings tab

  Note: in extended mode screen gigaframe becomes your office extensions!

  To set the Gigaframe in _Clone mode_ follow these steps:
  -Uncheck the extent my Windows desktop on this monitor option!

  The gigafmae display the same screen as displayed on the monitor of your PC in Clone mode!

  Love let you subview job function properly, please consider to stop your acceleration DirectX function! _

  If you want to play the video on the Gigaframe, you must select it * as primary monitor! *

• Second monitor is not detected after upgrade to Windows 10

  After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

  I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

• PC HP 8560w: second monitor with Windows 10

  I have upgraded to Windows 10 and my second monitor will not work. On Windows 7, I was running my second monitor with a USB 3.0 port. Apparently, 10 Windows does not support this configuration. How can I feed my second monitor in Windows 10 using either a USB 3.0 or MIC port?

  Thanks in advance.

  Coltrane22

  I'm running an additional monitor in Win10 to a USB connection, but it uses a USB adapter / VGA, and to make it work, I had to install the drivers that came with the card.  Before that I did, Win10 has not even seen the monitor.

  Good luck

• Windows 98 does not recognize second monitor

  Hello

  I am trying to get Windows 98 to recognize an old graphics card so I can use two monitors. I installed an old map of Weitek power 9001 and allegedly installed Windows drivers for it. I plugged the second monitor, and nothing happens. When I go to display properties, it only shows two monitors. Is the graph incompatible card or what?

  You need to download the drivers from the graphics card company Web site directly.  The default Windows drivers do not support the two monitors.

• I can't resize my game just in mode window to move it to my second monitor on a system bi-ecrans

  I understand that secrurity was added to two monitors.  My problem is when I play Wow and set mode window I can't resize liked my game and put it on my second monitor.  I have not found a setting that I need to change.

  Hi beachside301,

  Welcome to the Microsoft Answers community.

  I will need more information to help you better.

  · Did recent changes to the computer?

  · Is this the first time you arrive on this issue?

  · Did you use any third party registry patches or updates recently?

  The restore of the system on your computer

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start , type system restore in the Search box, and then click System Restore in the programs list.

  If you are prompted for an administrator password or a confirmation, type your password or click continue.

  1. In the System Restore dialog box, click choose a different restore point, and then click Next.
  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  3. Click Finish.

     The computer restarts and system files and settings are returned to the State they were in when the restore point was created

  For more information visit http://support.microsoft.com/default.aspx/kb/936212/

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How can I get windows appears on the second monitor?

  Windows does not detect the second monitor.  Unable to access options to the mirror of the main screen.  Second montor is connected, but is only the display wallpaper.

  Hello

  1. How did the second monitor connected to the computer?

  I suggest you try the steps from the link below and check if it helps.

  Solving the multiple monitor problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems

  Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors

  Set up multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Set-up-multiple-monitors

  Hope this information is useful.

• U2414H, Dual, laptop, Windows 10, Nvidia GTX 960 M, no STDS to the second monitor?

  Hi all

  I hope that I have included all relevant information in the present, but ask if I missed something. I bought two of the screens U2414H and a Windows 10 laptop computer powered by GTX 960 M with HDMI and Mini DP ports. My goal was to be able to the Garland of the whole U2414H screens so I could use my laptop out and about, and when connection back to the monitors of would have to plug in a cable and get two screens. In theory, but...

  I followed the instructions and using two Mini-DP to DP cables, connected the mini laptop RFP RFP on the first screen. DP on this same screen highlights Mini DP on the second monitor. I activated the DisplayPort 1.2 on both of these screens. I can't get any signal on the second monitor, it boils down to the power saving mode.

  Otherwise, I decided I would try using two cables and ditch the idea of DP STD I can at least use the two screens. So I have laptop HDMI to a screen and the MiniDP to another, and therefore, that alone will never work at a time. Individually, they work very well, both with HDMI or DP. But the two connection fails every time. When I tried to connect a display of alternative supporting HDMI as the second, which works very well.

  So I had an autour reading and it seems that it is common to have problems of connectivity to these screens. This brings me well on my two questions:

  (1) is there something that would work?

  (2) assuming that there is nothing that works, Dell can swap these screens for two that will achieve what I need?

  Thank you

  Dave

  In MST, DP 1.2 should be turned off (disabled) on the second monitor.

  Laptop AMD on--> U2414H CDM to cable DP--> DP U2414H #1 in (DP 1.2 enabled) (Port #3 in the image)

  
  #1 U2414H (Port #5 in photo) DP--> DP U2414H CDM cable--> 2 # U2414H CDM in (DP 1.2 disabled) (Port #4 in photo)

  When you use only no STDS, is the lid of the laptop open all trying to run two monitors of U2414H? This laptop can even run three screens, laptop LCD + 1 # U2414H + 2 # U2414H?

• Windows does not recognize second monitor, lists as generic pnp monitor

  I have a Setup dual monitor. When I bought the monitor in that I plugged it, windows 7 recognized immediately there were no problem driver. After about two weeks all sudden Windows Add as the right brand and model but just as a generic pnp monitor. I rebooted and the problem was solved. Then it started happening more and more and now I have nothing will fix the problem. I installed the drivers for the monitor, ATI drivers reinstalled and nothing else in between I can find. It wouldn't be a problem except that when it it lists as is the generic monitor does not have the correct resolution and I'm stuck with a second monitor that is horrible with a lower resolution. Any help or ideas would be useful.

  Specifications of the computer:

  Windows 7 Ultimate 64 bit

  Motherboard Asus Maximus II

  Intel Core2 Quad Q9550

  4 GB of Ram

  ATI Radeon HD 4870

  First monitor: Acer AL2216W

  Second monitor: Optiquest Q2162wb

  Hi k.Winger,

  What happened when you tried to remove it in Mode safe?

  I suggest to disable your antivirus and security temporarily software and try remove and reinstall driver.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.