WRT150N v1.1 doesn't recognize internet connection

Similar Questions

• Computer doesn't recognize internet connection

  My HP dv6000 family Window Vista premium Service pack 2 64-bit does not recognize my internet connection (local area connection or wireless network connection). The network icon has a red x and it says not connected, but actually I am connected to my wireless network. Also on the network and sharing Center I can't see any connection (no map) but don't forget, there is a connection with my wireless (a Netgear router on my desktop computer); If I open my wireless connection, he said that the network type is an Access Point. How can I change this? How can I make my connection wireless private when the connection does not appear on the network and sharing Center? I deleted my wireless network and set up again and always say the same thing.

  I am able to use the internet, but I can't update any program using the updated window or another service on my laptop. I already did a restore of the system, but all that the same stills. Can anyone help me please with this situation? I have tried everything I know, but nothing seems to work.  Thank you.

  Hello

  I saw the Red X problem before but not with any other questions you have.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ===============================

  After the foregoing:

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Then:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Do the same for network (NIC) cards - then right click on the devices and UNINSTALL.
  Reboot - it will refresh the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as
  Loves Vista updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART.

  ---------------------------------

  Other tips:

  If you are using a wired cable-

  Panel - Manager of devices - adapter - (NIC) - double click on the Advanced tab and set
  'speed & Duplex' at 10 Mbps full duplex and try 1/2 duplex. Be sure to APPLY / OK. Maybe
  help here: (don't forget the answer is complex, because there are probably more than a single)
  thing at the origin of the problem)

  ---------------------------------

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the wrong network
  device. You can try to disable any other network such as the WiFi device and restart it to see if it
  has an effect.

  Still a hardware such as a network card problem loose which is not properly attached to the computer
  can cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  Hope these helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• BlackBerry Smartphones clerical error: does not recognize internet connection

  When you use Blackberry Desktop, I get an error message when I run a module, e/g, synchronization, I need to be connected to the internet.  The dialoge box asks if I want to cancel or restart.  New attempt to strike does not change the result.  I am connected and B Desktop does not recognize the connection... This also happens with the module used to move data to another blackberry or other pda.  ??? Help!

  Hello

  Sorry, it has not worked for you,

  I am pleased that you are running.

  We will solve this thread, you can

  Open another if you need anything whatsoever.

  Thank you

  Bifocals

• does anyone know why my windows vista doesn't detect internet connection Wi - Fi?

  my laptop doesn't detect wireless internet, but it allows to detect a wired connection.

  Hello

  • What were the changes made before the issue started?

  The following articles might help you solve this problem.
  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Programs such as MSNmessenger, Skype, steam, etc. don't recognize the internet connection.

  I have a problem with the network connection to applications, do not know if they are called 3rd party applications, such as MSNmessenger, Skype, steam and WorldOfWarcraft? All of these types of programs that use the Internet outside of a Web browser do not recognize my internet connection. My internet browsers such as Internet Explorer and Google Chrome work except for Mozilla Firefox. And it is on Lenovo Thinkpad T400 with a Windows XP Professional.

  
  

  I'm sure that's not a router problem, or my ISP problem because I am the owner of another laptop. The laptop is a Dell Vostro 1500 with Windows Vista Premium 32-bit and it as no problem like this. Anyone know how to open this block?

  Try disabling Kaspersky, reboot and see if programs to find internet...-
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• installer of Motorola motocast doesn't say theres no internet connection when there is

  Motocast does not install on Windows 7 64 bit operating system.  Said that it must be updated, but not internet connection.  Problem is there IS an internet connection, but it doesn't of course.  Tried running as admin and still no luck.  Any suggestions?

  This is a problem known to installation of MotoCast... you must have the most recent Java.

  Here's the Motorola FAQ:

  https://Motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/A_ID/83050/p/1449%2C8119/kW/Java

• Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  I installed Windows 7 Pro on a system newly built using a motherboard Gigabyte Z77x-UD5H, Intel I7 - 3770 K CPU and 32 GB DRAM3, on a SSD OCZ Vertex 3. Everything went well. It is now about three days, since I installed the operating system. I've been adding on software and other general photo editing programs. The Internet would still work. NOW all of a sudden I lost my Internet connection.  Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  Hello is a network installed by Apple, iTunes more often software Protocol.  If you do not use iTunes * (or other Apple related programs streaming) you don't need.  If you do not use iTunes check if there are any available software updates.

• Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Please let me know how to start.

  Please try to follow: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Does not recognize my internet connection for installation

  never it don't let me do the final registration, because it does not recognize my internet connection

  Needs of Internet cloud

  https://forums.Adobe.com/thread/1549838

• Internet connection works, but Firefox doesn't load pages

  Internet connection works on Win7 Office (updates Windows, Google Earth works etc.) but Firefox & IE does not load web pages.
  Computer laptop (Vista) that uses the same router works Firefox fine.

  Performed various AV like Malwarebytes etc. software with no problems found.
  Re-install win 7
  Tried these solutions
  https://www.YouTube.com/watch?v=JK7oYj2YPNQ
  http://en.kioskea.NET/forum/affich-19117-Internet-connected-but-can-t-browse
  and other similar.
  Send from your cell phone like PC WIn7 does not allow me to connect and use the troubleshooting software

  Thanks for the reply, but I found the solution.
  Many answers forum suggest to change the network settings, but that does not work either.
  The combination which solves the problem was to run "SuperAntiSpyware" who found a virus that Norton has not blocked. AND to uninstall and reinstall my copy of Norton 360.

• I keep losing my internet connection and then my windows firewall was disabled when I reconnect. It doesn't to everyone at home who also use the same connection. Help, please

  I have a wireless router at home and everyone using it without any problems... except me! I continue to get purged from the connection and then I have to turn my windows firewall whenever I have reconnect. It can be very annoying, especially if I'm in the middle of a transaction. Any ideas please?

  Hello

  (1) do you have made no changes before this problem?

  (2) you receive an error message?

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  "Network connection is intermittent (periodically disconnects).

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  If you are able to connect to network after having turned off the windows firewall, and then add an exception in the windows firewall.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-a-port-in-Windows-Firewall

  Additional reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow#section_2

  I hope this helps.

• Netflix does not recognize my internet connection

  When I try to load the Netflix of in Media Center, I get the following error message:

  INTERNET CONNECTION

  There was a problem of data recovery. Check the works of your Internet connection and try again

  I have an active Netflix account.

  Hi Joseph,.

  Follow the steps mentioned below:

  Method 1:

  
   

  1 close Media Center
  2 click on the start menu, choose run and type cmd
  3 run the command regsvr32.exe atl.dll
  4 run the command C:\WINDOWS\eHome\ehSched /unregServer
  5. run the command/service C:\WINDOWS\eHome\ehSched
  6 run the command C:\WINDOWS\eHome\ehRecvr /unregServer
  7. run the command/service C:\WINDOWS\eHome\ehRecvr
  8 run the command C:\WINDOWS\eHome\ehRec.exe /unregServer
  9. run the command C:\WINDOWS\eHome\ehRec.exe/regserver
  10. run the command C:\WINDOWS\eHome\ehmsas.exe /unregServer
  11. run the command C:\WINDOWS\eHome\ehmsas.exe/regserver
  12 reboot Vista
  13 restart Media Center

  Method 2:

  Check if there are any problems with the internet connection in Windows media center.
   
  Solve problems with an Internet connection in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-an-Internet-connection-in-window-Media-Center
   
  Known issues and limitations of Netflix on Windows Media Center for Windows Vista
  http://support.Microsoft.com/kb/972496

  Hope this helps

• Customer WRVS4400N wireless doesn't have internet access, unless first connected via a cable

  Hi all

  I recently bought a security WRVS4400N router and have a strange problem with it. I have set up as my main router and two computers (a desktop and a server) by using DHCP. Both work very well, internet is as quick as it should be, no problem.

  However, when I set up the Wifi SSID (some security options I use, even with open/wpa/wpa2) and connect to my laptop. It is assigned an IP address and windows said that there is an internet connection. As soon as I try to do something good, I fell. Try to ping an external server, failure and dropped. Open IE, failure and dropped. I can't access my local server connected by wire to the router.

  If I connect to the laptop via a cable to the router everything works, and he continues to work when I unplug it. So that means that right now, I walk on to the router and connect my laptop for 3 seconds before you unplug the unit and then use the wifi for a couple of hours with no problems. But as soon as I try to turn on my wireless Logitech SqueezeBox or the wireless printer, they fail and take my cell phone with it...

  I have:

  reset the router, used the two firmware 2.0.2.1 and 2.0.1.3 and did a factory reset.

  Tried moving the router near the laptop, no difference.

  Does anyone have an idea on what could be my problem?

  /Thomas

  If you have received if from NewEgg as a refurbished.  Call Cisco Technical Support and open a ticket for her. Mine is returned to them for the same kinds of questions.

  Expect to be without it for a while, they told me within 24 hours of receipt, my replacedment would be sent.  They had for 3 days and counting... learned to love the tracking information.

• EA3500 - recognizes Internet

  I just got my new hanging cable internet service, but I can't get my wireless network working.  I have a Motorola Surfboard S6121 modem and a Linksys EA3500 wireless router.  It works fine when I plug the ethernet from the modem directly into my computer but when I plug it into the router, it doesn't seem to recognize the connection.  The light of the 'internet' plug lights to the top, and she broadcasts the network that I put in place with the configuration software, but not the internet.

  Phew... after a few hours of playing with it, I finally got it working by manually setting the static DNS servers in the Linksys config to those provided by my ISP (listed here for Comcast.)  Hope it's of use, if anyone has this problem.