WRT160N V2 multiple PPTP connections

Hello

I have a problem, try to connect multiple computers to a PPTP VPN.

I have a WRT160N connected to the internet with the option of Automatic Configuration - DHCP

2 computers behind the router to get IP from the router via DHCP

I can connect to a computer, without any

problems.

When I try to connect with my second computer freezes just the connections.

I read it has todo with GRE packets, or almost, I'm not an expert in network so

This information is enough for me, my questions are:

1 - is it possible to use this router and have more than one connected computer

to the VPN?

2 - If not is there any other wireless router I can use to fix this?

Any help will be greatly welcomed

Thanks in advance

Tonio

It depends on. It should be possible to connect to two different PPTP servers in the internet.

It is not possible to connect two computers on the same PPTP server via a NAT router. This is simply because the router should dig a lot deeper in the GRE to distinguish traffic Grateful for two client connections between the PPTP server and the router's public IP address.

Tags: Linksys Routers

Similar Questions

Not ios10 blocking VPN PPTP connections through personal hotspot?

I use an iPhone 6 + and was upgraded to ios10, two days ago.

While I don't have a configuration of the VPN connection on the phone, I connect my computer laptop personal hotspot of the iPhone to use internet and sometimes connect to a VPN.

Before my upgrade to ios10, my laptop could still connect to the VPN while connected to the hotspot from my iPhone.

After that I updated to ios10, my laptop does not connect to the VPN I connect to.

I see reports that Apple has abandoned the use of the connection for PPTP VPN connections on ios10.

But most of the people having problems seem to be people who connect to their phones directly to the VPN in the iPhone settings.

In my case, my phone is just acting under the guidance of the internet on my laptop but it seems that it does not obstruct my laptop to connect to a pptp even connection if that should have no impact on the phone itself.

I went down to ios9 and my laptop can connect again to the VPN.

But now my Apple Watch does not work with my phone because I improved the watch to os3.

Any ideas if there is a work around for the connection for pptp connections using the hotspon on ios10?

Apple mentions alternative - Prepare for the removal of PPTP VPN before you upgraded to iOS 10 and macOS Sierra - Apple Support

Win 7 crashes when you use multiple wifi connections.

Hi Shinmilla,

I have a problem with Win 7. How did it crash the system when you use multiple wifi connections. How can I stop this from happening?

Thank you.

Hi Triode888,

It is not recommended to have multiple Wifi connections since signals can be contradictory and therefore it crashes.

You can't have several active Wifi connections at the same time.

Also, I suspect it might be caused by your network wireless itself. It could be automatically connected to a network of 'death '. So please check that your wireless network is disabled or no if you do not use.

You have installed VMware or Virtual PC?

If so, these programs will create a new network - please open the network and sharing Center and disable these additional networks.

1. open the network and sharing Center page in the control panel.

2 confirm that it says multi-network right under the icon in the Middle, like the screenshot above.

3. click on the link customize to the right of the first illustrated network, directly under the Internet icon, to display the window set the network location:

4. move the window set the network location away, but let him open. (You'll need it in a minute, but at a time where it is otherwise inaccessible.)

5. back on the network and sharing Center page, click on the link manage network connections (in the left task pane).

6. in the network connections window, select the network adapter through which you get your Internet connection. (The views drop-down list, select Details; you want probably said something like network, unidentified in the status column.)

7. click on disable this device network above (next to the big red X) button. Wait a few seconds for the chart on the network and sharing Center page to reflect the change.

8. return to step #3 set network location window, and click on the merge or remove link network down locations.

9. Despite Vista earlier assertion that he detected "multi-network," you will see probably only a single network in the window of merge or delete network locations:

10. turn highlighted the only participant and then click on remove. (If there is more than one, you can delete all.)

11. When you are finished, close the merge or delete network locations, and then close the window set the network location.

12 return to the network connections window and with the adapter disabled network always highlighted the #6 step, click the option activate this device network (next to the big orange arrow) button.

13. after 10-15 seconds of delay, your Internet connection should work now, signified by the absense of the treacherous of entries multiple networks in the network and sharing Center page:

For more reference in http://social.answers.microsoft.com/Forums/en-US/w7network/thread/272b55ce-fb9a-423b-9a9a-8299f853cc29 look

Aziz Nadeem - Microsoft Support

Applications of multiple simultaneous connection with invalid password saturates the UDP ports and can lower the infrastructure of database 11g.

Problem statement:

Multiple simultaneous connection requests with invalid password saturates the UDP ports and can bring down the 11 GR 2 (11.2.0.4) database infrastructure.

When the API try to put applications that is not able to connect and DB is still suspended as long and we restarted to solve the problem.

So, I'm curious to know if a fix is available for this problem without having to restart the database.

Multiple simultaneous connection requests with an invalid password

Have you tried to use the password?

can lower the 11 GR 2 (11.2.0.4) database infrastructure.

I have to say that I am skeptical about this claim. I didn't know the database or the listener down due to attempts to connect not valid. Can you give us an error message or two confirming this?

The right course of action is to use the correct password in the application.

See you soon,.
Brian

Multiple simultaneous connections to a secure area with the same id/password user

I was wondering if someone can answer this.
We are creating a secure member area - there will be 3 area secure, air-conditioned and equipped with identical conent - a (one-time) 3 day trial, monthly subscription (recurring) and annual subscription (recurring).
The user logs in the generic secure area.
At this point, we can have multiple simultaneous connections with the same credentials in the secure area user - I was expecting it to be like the administration area where you get hunted if someone else logs into your account.
Is there a way to limit the number of simultaneous connections with the same ID and password to a secure area (generic)?
See you soon
Pat

This is actually a bug that they re not for awhile. If you connect to another place he should expel you from the other source of security.

Linksys Router WRT160N - Wireless does not connect to the cable modem

I installed the Linksys WRT160n router to replace an existing G router. When installed the new wireless router works, but the router does not receive a connection (IP address - look under status) of the cable modem (so no internet). When I reconnect the old router and then connect the new router, I get any internet connection through two routers (so the old dishes router the IP address that accepts the new router).

I have configured the router N new for

"Automatic configuration - DHCP", no need for connection, IP address dynamic, etc (as required by ISP - Timewarner)

I tried to renewal and release IP address by the router N when it is connected directly to the main switch (the switch to connect to the cable modem). In so doing, shouldn't that assign a new IP address to the router?

I am allowed 3 IPs from the cable company (because of the switch) and I use all three with three different internet IP cameras to each address for home security system.

Any suggestions on why the router is not connecting to the internet? Do I need to reboot physically everything on the network, including the cable modem?

If I understand your post, you said that your ISP gives you 3 Internet IP addresses and you have 3 cameras that use one of these Internet IP addresses. If this is correct, then that leaves no IP Internet address for your WRT160N use - so that would explain why your WRT160N cannot get an Internet connection.

If I misread your post, and you have an Internet IP address available for the WRT160N, you might have a problem with your modem and two WRT160N tries to use the same 192.168.1.x subnet. To check this, follow these steps:

(1) Please indicate addresses that use your cameras (IE before you take the test below). If the addresses do not begin with 192.168, then erase the last half of each address.

(2) Please indicate your ISP

(3) Please indicate the make and exact model of your modem (not the WRT160N) number.

(4) Please do the following test:

Put your entire network. Disconnect the switch (including cameras) to the modem. Using an ethernet cable, connect your modem directly to your computer. (Do not use the WRT160N for this test). Turn on the modem and the computer. Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

Go to 'Start' > all programs > Accessories > command prompt.
A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key. Copy all results in your next post. To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys. If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

Router WRT160N - Macbook Pro can connect but not Internet

For some reason any my macbook pro can no longer access the internet wirelessly through my WRT160N. It works very well through a cable connected. I can even connect to the wireless router - full signal and get only one ip address, but it does not connect to the internet - via my browser - I get "cannot find server" and "internet connection doesn't seem to work." Or other applications that use the internet don't work.

My mac has always been able to connect to other wireless routers. My router is the latest firmware.

I tried a lot of the things I found in various forums - redo manual settings of router configuration on the router, security (WEP, WPA, unsecured) settings and one suggesting same zap the PRAM. Any Suggestions?

If your MAC can connect to other networks / Wireless Router, it must do something with your wireless network...

In this case a simple reset can help you solve your problem, you need to reset your router to default and then re - configure the router from scratch...

To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

If your Internet Service is cable follow this link

If your Internet Service is DSL follow this link

Adjust the settings on your router wireless-

Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
For wireless settings, follow these steps: -.
Click on the Wireless tab
-Here, select manual configuration... Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

-Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
Please take note of the name of the wireless network (SSID) because it's the network identifier...
For wireless security: -.
Click the sub-tab under wireless > Wireless Security...
Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
Please note the 1 WEP key as it comes to the security key for the wireless network...

Click the settings advanced wireless
Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
Now let's see if you can locate your wireless network and try to connect...

If you have a second see computer/laptop wireless if it connects to your wireless network of...

WRT160N router is not connecting to Internet

I installed the router correctly, I changed the IP 192.168.2.1 as the instructions says here. Yet so far none of my wired computers can connect to the internet. I still am posting this on my laptop wireless through the same router. According to LELA my connection on my wired computers is ok.

What version of the WRT160N you (v1 or v2) and what firmaware is installed. If it's buil 11 you need to downgrade to build 8 by following the instructions in the link I provided previously. Build 11 is too unstable to solve effectively, without a downgrade to build 8 (as appropriate to your router) is a waste of time to try to solve your problem.

Tell us the router and the firmware version, and we can go from there.

WRT160N V2 can't connect to Internet

I installed WRT160n v2 router as a replacement for my previous mut router may not have work. I use only the wired connection.

ISP - Optus merger. Laptop is DELL Vostro 1710

I can get the IP address, but cannot get internet connection.

my browser can not display page of my modem (10.1.1.1)

I've been reading about this internet forum and chat support session conducted live - nothing hepls.

Any ideas? Here's my online Liksys configuration configuration page thank you in advance,

Andriy

Firmware version: v2.0.02 build 008 27 July 2008

Checking the firmware: 720240810b4ab4250c27f00baa79acb3

Current time: not available

MAC address: 00:21:29A:F4:8 D

Host name: domain name: domain.invalid

Internet connection

Type of connection: DHCP Auto - Configuration

IP address: 58.110.117.79

Subnet mask: 255.255.255.0

Default gateway: 198.142.129.45

DNS1: 10.1.1.1

DNS2:

DNS3:

MTU: 1500

49710 days 6 hours 28 minutes 28 seconds of the term of the lease DHCP:

Hi dibbler, I install modem as a full bridge and so far it seems good. Where therre is no performance and reliablility issues, I'll keep it what.

Thank you

Andriy

Router WRT160N v2 lose wired connections have to restart the router, then all is well again.

Hi all...

I'm having some trouble with my WRT160N v2 router, now I use it only to share the internet connection between wired PC.

I have tride (with the help of live chat) to reduce the size of the MTU to 1300, with no success, also an update of the firmware was informed, but I can't find an update for the version "v2" of the WRT160N router.

The behavior is really funny:

-Get random msgs "cable network is disconnected" and "local network connection is now connected".

* plugged direct cable from my modem to the PC then there is no problem, me makes me believe cables are ok

-Some sites don't be loading not on two PCs connected to the router, Firefox and IE8 trough during live chat, confirmed the site is up, it's as if something is stuck in the cache of the router or something that prevents some loading sites, sites that happen are random, the browser are not even a real attempt to connect but go now empty.

-Repair windows and hollow EasyLink advisor will have no effect, Easylink advisor indicates that the connection is good when it doesn't appear, restart the router is always fix the problems (for a while)

Modem: Comcast Cable

Router: WRT160N v2

PC1: XP Pro SP3 connected cable trough using Avast 4 Pro Security

PC2: XP Pro SP3 connected hollow cable using Outpost Security Suite Pro 2009

It's very frustrating because you can imagen, I hope someone got some clues for me on this one...

Thanks in advance...

Martijn greating

It should list version 1, 2 and 3, when you go to: http://www.linksysbycisco.com/US/en/support/WRT160N/download

Here are the instructions to DOWNGRADE the WRT160N V2, DO NOT USE this on VERSION 1 or 3, it will turn your router into a door stop!

http://audipages.com/router/

Multiple VPN connections using 871 router

Hello

I have the cisco router 871 at the site of the retail that connects to the corporate site. I also want to connect a device to the sharing network partner, but it needs to connect to their virtual private network. Is it possible to configure the 2 VPN connection to 2 different company sites in this scenario?

Thanks for your help.

Umesh.

Hello

You can configure multiple VPN tunnels on the router (whether on the same interface or different interfaces).

You can then perform the traffic from a tunnel in another tunnel, if you must do the same.

Federico.

PPTP connected cisco VPN but Internet not working

What wrong with my setup but my device not "connected to the internet, I use ubuntu 12.04 LTS
Cisco 1841

version 12.4

no service pad

service tcp-keepalives-in

service tcp-keepalives-out

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

hostname Router

boot-start-marker

boot system flash c1841-ipbasek9-mz.124-24.T.bin

boot-end-marker

logging message-counter syslog

enable secret 5 $1$eb9Q$7kMUF5Am0kVn/QXwssfrD/

aaa new-model

aaa authentication login default local

aaa authentication ppp default local

aaa authorization network default local

aaa session-id common

dot11 syslog

no ip source-route

ip cef

ip name-server 202.134.1.10

ip name-server 202.134.0.155

multilink bundle-name authenticated

vpdn enable

vpdn-group PPTP

! Default PPTP VPDN group

accept-dialin

protocol pptp

virtual-template 1

username ala***n password 7 051B131C2A4343

username fa***ul privilege 15 password 7 03520B59565F701C16594B51

WRT160N V2 multiple PPTP connections

Similar Questions

Maybe you are looking for