WRVS4400N router wireless

Similar Questions

• How to recover or find the network key for a router wireless (Netgear)

  Network wireless adapter NIC Ethernet network device

  How to recover or find the network key for a router wireless (Netgear)

  Hi RaymondKramp,

  ·         What version of Windows is installed on your computer?

  If you have lost the key to network and not connected to the network, then you can reset the router to factory settings wireless.

  If you lost the key network and connected to the network, and then log on to the Web page of the router and get the key.

  For more assistance, you can contact Netgear Support:

  http://support.NETGEAR.com/app/home

  Hope this information helps.

• MG 7720 - "MP Drivers not can be installed" - Windows 7, router wireless

  MG 7720 - "MP Drivers not can be installed" - Windows 7, router wireless

  It is a Canon PIXMA printer - new.  Everything seems to be downloading fine until it gets to the stage where the MP drivers are downloaded.  At this point, an error message is displayed: "MP Drivers could not be installed" I tried to install with the method of USB cable but no luck there.  I'm at my wits end at this point.  All the advice - please help.  Thank you.

  Hello.

  Try to temporarily disable all firewall or anti-spyware programs on the system when running the installation.  It may be possible that another program is preventing the MP Drivers Installer.

  If you continue to have difficulties, find more help contact us.

• my router wireless guard Plug and go offline.unplug and it works again

  my router wireless guard Plug and go offline.unplug and it works again

  Contact the technical support of the manufacturer of the router.

• How counfigur tp-link router wireless? I have the Wireless ADSL router. I want to add 1 wireless router in this system. What can I do? Please, I beg you. suggest me. ___thank

  1. to configure the router wireless in a network?
  2. I want to set router adsl on a network. How can I do?

  1. to configure the router wireless in a network?
  2. I want to set router adsl on a network. How can I do?

• Modem router Wireless N upgrade?

  I have a Linksys BEFCMU10 ver.2 modem which has served us for about 8 years.  I've recently updated our wireless n router, but have seen no improvement in the coverage area or speed.  The seller in Microcenter told me that my current modem was fine, but I wonder if I need to improve my modem to take advantage of the N WiFi feature.  Another thing, I remember when the tech our cable connected to the modem, it added a 10/100 switch.  Can it be purchased?  The research I did on the forums, it seems that I need a compatible 10/100/1000 switch for the gigabit speed.

  I apologize for the basic questions, but I tell myself that if I want to learn I have well start somewhere

  Thank you!

  It is not question of cause I don't think you have 100Mpbs subscription from your ISP. This modem is good for home use. You will get your your router Wireless N speed and that's only within your local network.

• Linksys makes a Combo of Modem/Router Wireless N cable

  Does Linksys router wireless n gateway, a combination router and cable modem?

  Currently I have the unit combined for wireless g, but upgrade to wireless-n.

  Thank you!

  I think at the moment that doesn't sell Linksys 802.11n gateways.

  I generally recommend not getting the combined devices, but better to get two separate devices, a simple modem and a wireless router.

  1. you have a far greater choice of products for the router, and they are usually less expensive.

  2. in the event of the death of the router you can still have internet via the modem directly. If the combined unit dies, you are in offline mode.

  3. less functions in a more simple design makes the device and averages more stable and more reliable devices.

  4. you can replace a device at any point. For example, if you pass the ADSL or FTTH cable you can simple replace the modem. You may need to change the configuration on the router but other internet connection so that you can keep the router. Similarly, if two years from now, you want to get the router new generation wireless you can continue to use your modem (if it is still suitable for your internet speed)

  Some thinking...

• WRT160N router wireless and speed Test

  Hello

  I was wondering if someone could help me.  I've just changed in the old Netgear G router to a router cisco Linksys N.  When I'm connected wireless sitting next to the modem and the router of my speed test shows more than 20 on the download, but when I go up a floor in the House it drops at least 2 on the download.  I thought that this router was supposed to expand the range and allow more devices to connect wireless taken less bandwidth.  Is there something I can do to improve the speed in addition to spending my router wireless on the main floor where is most of the navigation on the internet?

  Hahahaha WOW no no not the router to the modem worked!  I went from 1.5 on 15 on downloading downloading when I had about one foot apart from each other!  Awesome.  I have not been very high over the years!

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• My HP Photosmart C309a printer can't find the router wireless 3 feet above him.

  My HP Photosmart C309a printer can't find the router wireless 3 feet above him.  I ran the diagnostics and got the message "the wireless radio does not work.  This device is the wireless radio?  In the router? In the printer?  I have reset the router is #6 with the printer, but I am still unable to connect my Macbook to the printer wirelessly.  My desktop Mac is connected to the printer with a cable and print well.  Is my router messed or my printer?

  Wireless radio of your printer (that it uses to communicate with the router radio) died.  Here's how to contact HP technical support: www.hp.com/go/totalcare

• No Internet access - network/router wireless connection problem

  I can't connect to the internet after installing Windows 7 64 bit. I can see the router wireless/network from my computer, but it has sometimes limited connectivity or it says connected but no internet access. I used Windows diagnostic tools to try to fix it but it does not work, and my router connects without a doubt to the internet such that I now use on a portable computer that is on the same network. I would like to know if anyone else has this problem and if they fixed. I tried to change the physical address of the connection to the local network, but it didn't work, I guess because I connect via radio and no cable, and I heard similar stories on other forums that this can be a problem more common I suspect. Thanks in advance for your answer, and all the details you need I'll try my best to provide.

  OK I finally got to work, all we needed was for me to download the latest drivers (Realtek 8185 wireless card) off-site and install in compatibility mode, and then he worked all of a sudden. I hope this will help someone suffering from a similar problem!

• Cisco 877W router + wireless WPA

  Hi all.

  I configured the part my 877W router wireless. Right now I use WEP only, but I want to configure WPA (with shared key before) for more secure access. I'm a noob with wireless and I don't have much knowledge about this configuration process / options.

  Please can someone me the correct procedure to configure a work of authenticated with a simple key WPA - PSK WPA Wireless LAN (no beam)?

  I was working with Web interface (option Express Wireless the wireless WEB application security) for setting commands not IOS CLI.

  Thank you very much.

  Set security | encryption | TKIP + AES encryption algorithm

  Set security | SSID Manager | Methods for 'Open' (only)

  Check the 'required' box for key management

  Check the box for WPA

  Enter a key

  As with WEP, keys on the AP and the keys on the clients must match exactly (case, spaces, everything).

  Good luck

  Scott

• problem with WRVS4400N router.

  Hello

  I have a problem with the new WRVS4400N router.

  After you have connected to my modem infrastructure and configured WAN configuration with my ISP provider,

  ISP see I am connected, I see that I am connected, get a GREAT link and link of 70M, about speed.

  Yet not be able to access the web trying to leave a different devices (TABLET, laptop) or different (WiFi, Ethernet cable) connections.

  When I am connected directly to modem infrastructure, Internet access is successful.

  In addition, what router previous (EDIMAX) which was also connected and I tried, access to the web succeeded.

  Can you please help me solve this problem?

  Not able to understand what is the problem.

  Thank you

  Can you access the WebGUI of the WRVS4400N when it is connected to the modem catch up.

  This is a cable modem?

  Try restarting the Modem, then once all lights went solid/normal and modem is stable, restart the WRVS4400N and try again.

  What about Simon
  http://www.linksysinfo.org

• Mapping a network drive through VPN on a WRVS4400N router

  I have a WRVS4400N router and have connected through the VPN Client quick 1.3.0.3 my laptop running XP.  I can ping any IP on my network I can access HTTP addresses and distance desktop (VNC), but I cannot map a network drive.

  The network drive on a PC running XP, I tried using the name of the system as well as the period of investigation and no mapping work.  When it is connected directly to the LAN/WLAN router, there is no problem of mapping of the disks.

  Any help would be appreciated.  Thank you!

  Hey Blair,

  because this issue concerns a product in small businesses of Cisco / Linksys range, I suggest move you into the community, where you will have a better chance to get expert advice.

  Best regards

  Herbert
  Moderator of Cisco