XPS 13 9350 Installation Windows 7

Similar Questions

• Bluetooth keyboard no longer works on Dell XPS 13 (9350)

  This morning my Microsoft Bluetooth Mobile Keyboard 6000 which was already very well stopped working with my XPS 13 (9350, running Windows 10). The keyboard is grayed in devices and printers. I tried to remove an instrument from there, but he won't. I tried to add again as a new device, but it is not detected.

  Also Microsoft Help says Bluetooth needs to be displayed in the start menu > settings > devices but there is nothing about Bluetooth technology in there, which makes me wonder if Bluetooth stopped working entirely.

  I have the latest updates to Windows, Dell and BIOS updates. I have updated drivers using Driver Reviver (although some not always update all) and also relevant drivers looking for Bluetooth in the Device Manager. alone was obsolete, but it made no difference. Also rebooted several times during all this.

  What should I do?

  In fact I finally fixed it, as a result of this video:

  cs_setInnerHtml ('video_3649fa29-4eba - 4b 73 - a87a - b8b751a56db9', ");

  Then, I managed to get an instrument of devices and printers (he continued to show gray but had gone, not obvious until I clicked on the arrow to refresh), and then added again with device adds and he then worked.

• Bluetooth doesn't work is not on the new XPS 13 9350, Windows 10

  Just cannot get Bluetooth to work with any device, even if these devices work with each other.   She will see the device in the Bluetooth settings page and will get "associated with" and then "Connected" for about 5 seconds and then fall back to "paired."  Never really gets a usable connection.    Everything works well on this laptop.  I downloaded a couple of drivers from the Dell site but don't know where to go from here.  Any help would be appreciated.

  Here is how I solved this on my Dell XPS 13 9350

  1 removed my device manager bluetooth accessory (in my case it was a headset/earphone)

  2. right-click on the "Bluetooth Dell Wireless 1820 A 4.1 THE" adapter and click Update driver software.  For me, it downloaded and installed an updated (took a few minutes)

  3 reset

  4. This is probably the key bit (gleaned in a post I found on a forum of HP for a similar symptom).  GO INTO THE BIOS AND RESET BIOS TO FACTORY SETTINGS

  Without step 4, no matching rate, uninstall, etc seems to have no effect.  I guess this is because the different versions of the bluetooth driver write different/incompatible bluetooth keys in the key store, and I suppose that the reset of the bios that erases the.

  Once again I re-paired everything then worked... CLOSE.  for my helmet in particular, I also need to do this:

  5. go in Control Panel "devices and printers".  Right-click on the bluetooth accessory and select Properties.

  6. click on Services.  It takes a few seconds to refresh

  7. you should see a bunch of boxes.  For me, they were all uncontrolled!  In order to check their to activate these services (for example "Audio Sink" to get audio routed to devices 'Remote Control' to manage accessory buttons, "Hands-free telephony", to manage the micro call / voice, etc.)

  Finally (!)  I could then do a right-click on my Audio properties, go to playback devices and select my bluetooth headset (and change to the default playback device, etc.)

• 1.1.7 BIOS bug on XPS 13 (9350)

  Hello

  The latest BIOS 1.1.7 on the XPS 13 (9350) which increases the life of the battery for Windows users does not for Linux because of the SSD NVME users not be allowed to access the standby modes.

  At the start, several from ACPI error messages occur (see http://pastebin.com/8E6iXKMM ), here are a few:

  [0.155273] ACPI FADT says the system is not support PCIe ASPM, so turn it off

  [0.185298] [firmware bug]: ACPI: _OSI (Linux) ignored BIOS query

  [0.203571] ACPI Exception: AE_NOT_FOUND, while assessing sleep state [\_S1_] (20150930/hwxface-580)

  [0.203580] ACPI Exception: AE_NOT_FOUND, while assessing sleep state [\_S2_] (20150930/hwxface-580)

  ACPI [0.850917] PNP0C0B:00: cannot change to D0 power state

  ACPI [0.870806] PNP0C0B:00: can not the crossing of (unknown) D3hot

  Glances at Arch Linux forums and reddit/r/Dell, it seems that Linux users have not benefited from the last update of the BIOS. My system boots also all other time and the case ends with a black screen.

  No matter what other updates BIOS that we can expect to solve these problems?

  Thank you very much!

  more info about 1.1.7 buggy bios bugzilla.kernel.org/show_bug.cgi

• XPS 13 9350 informed retro keyboard does not...

  I just got my new XPS 13 9350 and the backlit keyboard has never worked... the only light I see is the caps lock...

  I have no idea if it's a hardware problem or just a driver problem...

  I tried the BIOS setting, but nothing has changed. And the Windows Mobility Center did not show something on the keyboard backlight...

  Morning - Interestingly, our XPS 13 9350 a F10 as the switch for backlight, not F6 as shown above. (It is perhaps specific UK or something?)

  Anyway, just thought I would mention it.

  See you soon,.

  Chris

• XPS 13 9350, stop at 80% load (plugged in, not supported)

  Hi supporter,

  I bought a laptop DELL XPS 13 9350 of Bank of Microsoft (NY), last week. But it stops at 80% load. I read all the topics on this forum, but my problem is not solved. Yes, I did:
  -Update window
  -updated BIOS version 1.4.4
  -BIOS > setting > battery general information: excellent health, 80% (Idle), AC adapter / CC = 45W
  -Power management > Configuration of the main battery Charge: Standard
  -all step here

  except (step 5 & 6).
  -J' ran diognasis test in BIOS: all past.

  What could I do next? Thank you

  Contact Dell for a replacement of the battery warranty.

• PXE cannot start with XPS 13 9350

  My company has recently had to buy a few new laptops due to expansion, and the XPS 12 9333 was no longer available, so we sold the XPS 13 9350 instead, having received assurance that it is the same system and everything will be supported as it was with the XPS 12. I ran through the normal steps in the BIOS to ensure a compatibility PXE boot (disable Secure Boot, select Startup inherited, etc. options), but when I hit the F12 key to try to perform a network boot I don't see the option in the start menu. All I see is Windows and the Samsung SSD Boot Manager. Someone at - it else here had this problem and managed to resolve it? We use Ethernet USB21000S2 StarTech adapters suggested, that Dell sold us.

  Trying to deal with their customer support has proven me why I HATE DELL with a passion. Advised to my boss to go with ASUS or Lenovo, but she wanted to go with Dell because of a long-standing commercial relationship. You can not get someone who speaks clear English on line, you will need to explain your problem 10 times before you finally get someone who is able/willing to help. No one seems to understand what I meant by PXE boot or told me he is not allowed on their laptops.

  Hi Rick,

  Thanks for the reply. We have tried all the suggestions that you pointed out, but nothing has been able to get the Startech adapter to work. You don't know if it is related to two USB 3.0 ports or not, but it seems that the Startech USB21000 does not work with the Dell XPS 13 9350.

  I had to buy an adapter Ethernet USB - C, and which went through without any problems. About 1/2 also took time to the Startech adapter took which was a pleasant surprise.

• Dell XPS 13 9350 Touchpad emits

  Hello

  I have a XPS 13 9350 with a clean install of Windows 10 on Bios 1.2.3.  The touchpad has a couple of questions:

  (1) full of energy when scrolling.  In a Web browser, when using two fingers to scroll down, to release the screen pops up a little - sometimes jumps to the top of the page again.  It's better described is this post, but with no resolution:

  (2) tap to click sometimes stops working.  When this happens if I move a finger on the pad a little and try again, it starts working again.

  3) click done drag provided by himself.  More often than otherwise, if I click and hold the button on the touchpad to move a file, it is free until the button is released.  Its almost impossible to move emails between folders in outlook because of this behavior.

  Here are common questions of interest?  I get a faulty hardware?  I run Dell Update utility, but apparently my system is up to date.

  Pointers appreciated!

  Thank you
  Ben

  Hi, I had questions specifically chrome scroll when the 9350 XPS13 was released in November. The update of Windows 10 TH2 which sets however. I assume that you have already updated to Windows?

  Yours sounds like you have a defective hardware and must be an easy diagnosis to Dell support.

• I lost my CD Installation Windows XP license.

  I lost my CD of XP Installation Windows licensed and want to install on the new system.

  How can I do?

  How to replace hardware or lost, broken, or missing Microsoft software:
  http://support.Microsoft.com/kb/326246/en-GB

• Uninstalled Microsoft office XP Professional with Frontpage, since then I get Windows Installer Windows pop up. Y at - it a fix for Windows install stop this.

  Uninstalled Microsoft office XP Professional with Frontpage, since then I get Windows Installer Windows pop up.  Y at - it a fix for Windows install stop this.

  You are in the habit of using "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. ( CCleaner Registry Cleaner) ?

• Error installation windows re-setup - a script required for this installation to complete could not be run

  Original title - how to reinstall windows install

  When you try to redownload the installer windows Iget a msg that says: a script required for t his install to complete could not be run.

  Hi nyyankee53

  
  You can check if the antivirus or other security software raises questions. I would say to you temporarily disable the security software installed and check if the problem is resolved.

  If you disable any security software for troubleshooting temporarily, so don't forget to activate after troubleshooting is completed that your computer will be at risk.

  See the help link - below
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

   

  I hope this helps.

• Noise - Dell XPS 13 9350

  I bought a new dell XPS 13 9350 from BestBuy August 8, 2016 and have several sound problems.  First all the sounds stopped working about a month after the purchase of the laptop but using the Dell.com support site, I discovered that 3 Intel drivers were disabled. Once I reinstalled audio drivers started working again, but another question continued. A periodic static noise.

  Laptop periodically makes a static sound whenever you press a key. The noise at startup, it happens every time that you press a little matter what kind of program is running and so far there is no apparent trigger that forced him to start emitting static noise. Twice I ran diagnosis "Full Test" on the dell.com support site, but the test can't find any problems. Considering the price of this laptop, I am surprised and even more shocked to see that other people have problems with static sounds.

  I bought a HP laptop the year last for half the price of this laptop and have not had a single problem with this computer.

  Hello. Read past questions FAQ and see if the solution in the XPS 9350 & 9550 helps.

• XPS 13 9350 fails with DA200 USB - C 4 in 1 adapter

  Hi all

  Just got an XPS 13 9350 (i7, 8 GB, 256 GB drive). Has also ordered the DA200 4 in 1 adapter for plugging the second ethernet cable and the monitor. It was delayed and came a few weeks later.

  Configure the portable computer, applications etc. added and used for two weeks. Then, when the DA200 is presented I have connected to the USB - C port. He went through the step adding drivers like any new device. After that he would be constantly connect and disconnect. Device Manager would show the card network disconnected, connect, error with a yellow warning triangle. He would have this for 5 to 10 minutes then drop and say there is error of connecting the device.

  Went to Dell support, found a bunch of new drivers, installed all of them. Thunderbolt of the firmware and drivers, ethernet Realtek USB, BIOS, etc. All the latest on the 7 July and there was some new that is added to the end of June / beginning of July.

  I then decided to perform a reimage to factory default. Basically take it back factory default as it came from the factory and still have the same problems.

  Called the Dell suport, was on the phone for a few hours and all done the same thing. Reload the drivers, patches, etc. All the latest and bigger and a couple, he had access to. still no luck

  As soon as I connect the DA200, the laptop (new unit added) beeps and boops (device removed) then again and again. Device Manager shows it appear then disappear.

  No resolution and waiting for support to call me back with the action plan.

  I was wondering if anyone has tried the same scenario and your experience.

  I heard a lot of people having problems with the Thunderbolt TB15 docking station that uses the same port USB - C thunderbolt. Also, I ordered the TB15 and had to cancel the order, as is the remaining forever and Dell wouldn't let me keep the active order. Now, you don't see yet the TB15 to order, so assuming there are serious problems with the thunderbolt devices.

  So now I have no home solution and you wonder what's next.

  Thanks for any help that is out there.

  Search for "broadcom" for instructions on how to lower your wireless radio power. This works.

• USB port - C Dell XPS 13 9350 and external storage

  Hello everyone,

  I have a 3.1 USB enclosure external (Vantec Nexstar USB 3.1, model # NST - 270a 31 - BK) that I connect to the USB - C (Thunderbird 3) of my XPS 13 laptop 9350 port.  The player does not start even after using two different 3.1 USB cables.  I installed all the USB drivers and Thunderbird from the Dell Web site and active port in the BIOS, but still have no chance to get the player to run.

  That's when I plug the player into a standard USB port with a USB 3.0 cable, boots road to the top and is recognized by the laptop without problem.  So if my diagnosis was made correctly, the USB box and wiring is not defective, so the problem must lie with the USB - C port.  Has anyone successfully used port USB - C to access the external storage with a bit of luck?

  See you soon,.

  Kokanee

  In another thread ("XPS 13 9350 - SSD USB C 3.1 - very unstable/not usable '-I can not add links), the following fixed my problem by using a drive HARD USB 3.0 with the Dell USB - C for HDMI/VGA/Ethernet/USB3.1 adapter:

  ... the adapter USB - C and WiFi are kind of material and power wise. If you go to the options of the advance of the WiFi adapter and change the WiFi output at 75%, this solves a lot of problems with the connection / disconnection of USB - C questions. Exit at 75% reduction does not affect your connection on wireless networks.

  My HARD drive kept connect/disconnect when you use the adapter, but this correction took care of her.

• XPS 13 9350, "plugged in, does not support".

  New machine, the first time I started it up I got this warning message:

  Product name: XPS 13 9350
  System BIOS 1.0.0
  Service etiquette: xxxxxxx
  ePSA: Build 4302.10 UEFI ROM
  The attention! Power adapter AC power and the type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available.
  Note: This warning can be disabled in the BIOS Setup.

  I don't worry for a couple of days, but when I plugged in the power adapter, the battery status said "battery level of 48% (plugged in, does not support).

  In the settings of the BIOS under General battery information, he showed "AC adapter / CC = unknown" under System Logs, events of the BIOS, he showed: DateTime "alert!" Unknown sector adapter, can affect performance. »

  I clicked on the 'Diagnostic' button on the start page alert and Dell SupportAssist under "Battery and AC adapter" report shows "current adapter: 1 watt adapter, top: n/a, low: n/a.

  The little blue light on the plug of the adapter lights up.

  Many people have encountered similar problems with Dell laptops, but there only seems to be as well as workarounds and very few solutions. I have a very short time period in which to return the machine, and I'm not at all a type of material, so I'm not opening upward.

  Suggestions for solutions/FAST?

  Thank you
  Chris

  Rishi,

  Yes, I did and it works! The MS Store sent me one as well, but it was a 90 watts, not 45 adapter. It turns out that they don't have. They sent me a backup battery, which is nice. Find out what Amazon of the adapter I got:

  www.amazon.com/.../B00EM2V8AS; PSC = 1 & redirect = true & ref_ = oh_aui_detailpage_o00_s00