XPS 8700 + Radeon 5770 does not

Similar Questions

• XPS 8700 - new mSata does not start unless...

  I had my 8700 for a little more than a year and from the beginning, I put a 256 gb 2.5 SSD and everything has been good... unfortunately I ran out of room so I'm a 512 GB mSata and installed with the normal hiccups (bios setting, etc.) and for the most part, it works fine... installed win7 - all my programs games, media and all that. Well, now that I have everything there I was trying to format the original 1 TB hdd which served the initial boot (later converted to my games drive) drive and it refuses to format 'windows cannot format the system disk partition' I went into the BIOS and noticed his 1st listed in the order of the boot sequence. OK... so I put the mSata as first on the boot sequence and people with other disabilities 2 boot sequence HARD drives... Unfortunately, after that it does not start, say no boot device available. I tried other settings and the only way I can get my OS to load is if I put it on AHCI - legacy - then set my empty 1 TB (manually remove games) under the 1st boot device and set my msata #2. I want to use the 1 TB in a different computer and I want all my available bays opened for larger storage players when I need... but most of all I want to solve it because he needs to solve... Someone has an idea what I am doing wrong? any help is appreciated.

  Specifications:

  XPS 8700

  I7-4770

  BIOS A10

  M550 crucial mSata

  OS was initially earn 8.1... I upgraded to win 7 home

  The boot sequence is dynamic, so it does not matter if change you it in the bios. Each listed item will be sought for the boot files according to what is currently installed. Because your startup files are not on the ssd, it will never start to this player. Windows must be installed on the ssd from scratch, so you lose everything and have to reinstall everything. If you have now works well, leave it alone and save yourself a lot of trouble. Startup files are still on the original drive.

• My Dell XPS 15 audio Jack does not work.

  Hello, my new Dell XPS 15 audio Jack does not work. I just got this thing out of the box.

  I have updated the drivers and stuff, which doesn't seem to be the issue.

  I tried several headphones as well, the helmet is not the issue.

  I've isolated to this: when I plug in the headset, nothing happens. If I ask about 15-20 lbs of pressure, forcing the connector of headphones into the socket as hard as possible, the cell begins to recognize and the helmet works. As soon as I let go of the connector, the laptop will behave as if the device was disconnected.

  What should I do?

  rsidhu89

  What should I do?

  Hello. Your options are to contact technical support to schedule a repair, or return it for a refund or Exchange if you are still in the short return period (twenty one days from the date on the invoice if you got from Dell).

• XPS 400 video controller does not

  I have a XPS 400 desktop computer that runs currently the 10 Insider Preview Windows operating system and its video controller does not work and so he struggles to play YouTube videos and he is totally unable to play games should be able to play. I once had this computer to run an operating system called Linux Mint and the video controller worked fine until I put Windows 10 on it. In Device Manager the video controller appears under other devices with an exclamation point. I tried to have the search system automatically updates of pilot, but he can't find. In the past I thought that the video controller was that of an AMD processor, but I don't remember why. Recently I watched the original specifications and it comes with an NVIDIA GEFORCE 6800, so I'm not sure she has and this computer has done to my knowledge undergo updates before I owned it but I don't know if its video controller has been changed. Nevertheless, I tried to get help thinking it is an AMD but nothing helps and I tried to download the drivers from NVIDIA but it still does not work as there is very little information on the video controller. Does anyone know a way I could get the video controller to work?

  10 Windows will have to use vista old drivers for video cards of vacuum tube.  XPS 400/Dimension 9150 can run windows etc. 8 or 10.

  Old cards Nvidia cannot use the latest drivers.

  the 340 series is the last version supporting older cards.

  NVIDIA has officially END END of SUPPORT LIFE in April 2016.
  http://www.nvidia.com/download/driverResults.aspx/77224/en-us

  http://NVIDIA.custhelp.com/app/answers/detail/A_ID/3473/~/EOL-Windows-driver-support-for-legacy-products

  But 64-bit versions of windows 8.1, 10 will require Pentium D 915 or higher with the radiator of the performance of copper.

  DirectX June 2010 is required to submit the drivers of DX10, which is what vista uses.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8109

  You download and extract in a folder and run DXSETUP. EXE as administrator.

  After that you will need to go into Control Panel, in programs and features add functionality to windows and re enable legacy live show.

  Then install of Chrome.

  http://www.Google.com/chrome/EULA.html?system=true&standalone=1

  Before installing this driver.  You must also add the feature back for legacy Live Show on Control Panel.  If you do all the right things in the right order, it will work.  Control Panel, all the elements of the Control Panel, programs and features, windows features, turning on and outside

  Then do the check boxes.  You MUST BE online when you do this, because he lament not find features and who need to download them from windows update.

  

  Description	Supported OS	Download
  ATI TVT2 Wonder Elite - unique analog NTSC TV Tuner internal, v.8.33.7.1, A00 (v64) Latest driver for the MCE Vista 64 bit for ATI TV WONDER ELITEmore details	Windows Vista 64-bit
  ATI TVT2 Wonder Elite - unique analog NTSC TV Tuner internal, v.8.33.7.1, A00 (v32)

  
  Latest driver for the MCE Vista 32bits for ATI TV WONDER ELITEmore details Windows Vista 32-bit ATI 256 MB RADEON X 850 XT Platinum Edition, Hyper memory PCI-Express X 16 (DVI/VGA/TV out) Radeon X 300 SE 128 MB Radeon X 600 SE, RADEON® X 600 256 MB HYPERMEMORY, 256 MB Radeon X 600, Radeon X1900XTX 512 MB, X 1300 Pro 256 MB, X 1300, X 1300 Pro, dual 512 MB Radeon X1950XTX Crossfire, v.8.332 - 070108 a 1-041388 C - Dell, A01
  64 bit Vista WHQL 8.332 driver from ATI. More details Windows Vista 64-bit ATI 256 MB RADEON X 850 XT Platinum Edition, Hyper memory PCI-Express X 16 (DVI/VGA/TV out) Radeon X 300 SE 128 MB Radeon X 600 SE, RADEON® X 600 256 MB HYPERMEMORY, 256 MB Radeon X 600, Radeon X1900XTX 512 MB, X 1300 Pro 256 MB, X 1300, X 1300 Pro, dual 512 MB Radeon X1950XTX Crossfire, v.8.332 - 070108 a 1-041385 C - Dell - Vista32, A01
  8,332 32 bit Vista WHQL driver. More details Windows Vista 32-bit ATI Radeon X1900XTX 512 MB, v.8.31.100-061024a-039652C-Dell-32Bit-Vista, A01
  32 bit Vista driver 8.31.100 driver for UHMGA14. More details Windows Vista 32-bit ATI Radeon X1900XTX 512 MB, v.8.31.100-061024a-039729C-Dell-64Bit-Vista, A01
  64 bit Vista driver 8.31.100 driver for Radeon X1900XTX 512 MB graphics card. More details Windows Vista 64-bit AGEIA PhysX adapter, v.2.6.2 (plant), A04
  AGEIA PhysX driver updated to take in charge the XPS 710 platform. Adds support for the latest games that use the card AGEIA PhysX and Novodex engine. More details Windows Vista 32-bit
  Windows Vista 64-bit
  Windows XP x 64
  Windows XP ATI Wonder Elite TVT2 - unique analog NTSC TV Tuner internal, v.8.273, A06
  Latest version of the driver for ATI TV WONDER ELITE. More details Windows Vista 64-bit
  Windows XP
  Windows Vista 32-bit

• XPS 8700 RAM upgrade - do not use full capacity

  I decided to get max out my RAM on my XPS 8700 to 32 GB. After booting, I am only using one half of the total. I checked the system settings to see if there is something that needs to be defined, but I don't see anything that will help.

  Is there a material DIM switch or something of RAM is correctly adjusted? I looked in the user guide but cannot see how to swap the RAM modules.

  If you have windows 7 home, your authorized max is memory 16 GB.  If you have Pro, you can go up to 192 GB.  Windows 8 and higher increased the memory limit.

  If it does not, you may have some bad RAM.

• HP Pavilion dv6-6119tx: AMD Radeon 7400 does not!

  HII I have a HP dv6119tx notebook pc with amd radeon HD 6490 m. When I upgraded my OS from Win 7 HomeP Win8 pro graphics changed in HD 7400 m and its does not work. When I check through Device Manager, indicated by a yellow exclamation on amd driver. When I try to update the driver, it instructs windows already installed the latest driver. I then tried the amd auto detect tool to update the driver. But the downloaded file does not work in my system. So now how I do my amd gpu work and get switchable graphics

  Hello:

  Use of the W8 amd graphic driver for this model.

  Uninstall all the drivers you have tried everything first and reboot before installing this driver.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp59850.exe

• U2412M, new XPS 8600 DVI monitor does not

  XPS 8600 with AMD 7500 series (an HDMI and a DVI output) video card.  The monitor is dead and does not illuminate.  Drop shipped a new Dell today and at least this monitor turns on (the led lights).  Connect DVI to DVI results in the error 'no signal' on the screen despite checking the entry in the menu monitor DVI...  If I use an old VGA cable with an adapter DVI of the computer that connects to the VGA port on the new monitor, there is no problem. So is the DVI cable, a problem with DVI-d port on the 'new' screen, or something else?

  Thus, the new monitor came today and push the pedal using the existing cables, video card, etc. without incident.  The problem was with the refurbished monitor Dell sent in replacement.  Although I am happy that the incident is resolved, it took way too much troubleshooting and perhaps Dell should place stricter requirements on the "refurbished" products, they sent.

• XPS 14z micro (L412z) does not

  I use Windows 10 Professional edition on a 64-bit operating system. My microphone does not work recently.

  I tried reinstalling the drivers, updating drivers troubleshooting, but it still does not work.

  How can I solve this problem?

  Problem solved. I downloaded and reinstalled the driver of www.driverscape.com/.../145741.

• RAM Dell XPS one 2710 question does not start with more than 2GB of ram

  Hi, I recently updated to Win10 I've taught it will be easier way for installation after upgrade fees, but the reset button does not work so I decided to return to 8.1. I copied version UEFI victory to USB and restarted the victory while pressing F2, but the computer does not restart "just black screen even no Dell logo" so I turned it off, back on and same story. Then I disassembled the pc and know that no matter what combination I do the computer not start until there are just 2 GB or less ram in slot I have 1 x 4 GB 3x2GB and 2x1GB any variation as possible, you can imagine I tried close up with the same result. If there is more than 2 GB of system ram won't start. No idea where is the problem? for 2 years this computer worked perfectly.

  PS: Does anyone know how to reflash the BIOS I have spin A12 which is the most recent, but I want to just make sure that the BIOS is not messed up. DELL utility allows not only update reflash. Does anyone know how to force the upgrade of BIOS?

  So I found the problem, it's a BIOS. I tried to reset it in PIN on MB and it did not help removed battery no change I found that the BIOS utility can be forced thru cmd. So I did and the finishing of the bios update successful she even seems scary cos for any computer freezes. but that came on and after several early I can again use all the RAM slot with what ram size I want.

  How to force the update of the BIOS...
  Open cmd as administrator
  and run the exe with command extra /forceit in my case "A12.exe /forceit".
  Voila BIOSupdate is running

  Simple but time fly. hope it helps someone too.

• XPS 10 - just received, does not illuminate

  Hello

  I just got a tablet of 10 XPS today.  I loaded the device for 4 hours as stated in the manual.  After 4 hours I tried to start the machine, but it would not start up.  The only response to pressure (and holding) the power button was the LED flashes 3 times.

  My guess is that there is a problem with the battery and the flash LED tells me that the unit is not charged.

  Someone at - it the same problem?

  Got this the other day for the support of Texas... and it worked!

  .  A problem has been identified with this model where if battery low it will appear dead and not turn on.

  1. Unplug the connector to 40 pins of the tablet. If anchored, unplug the Tablet from the dock.
  2. Press and hold the power button for 10-15 seconds (this makes a strong power off on the device in case it is locked or hung)
  3. Reconnect the connector 40 pins on the device. Leave the responsibility of the unit for at least one hour (60 minutes) before you press the power button /. By pressing the button power until the device is charged will hang the unit and prevent another load.
  4. After waiting at least an hour, press the power button for 3-4 seconds, turn on the unit.
  5. If this solves the problem, the battery was dead and the aircraft entered a suspended state. A software update for this problem definitely will be pushed by the update of Windows ~ February 12, 2013.

• Dell XPS 2720 slinging disc does not, the monitor and the keyboard?

  Hey,.

  I know I'm not the first to ask this question, but unfortunately my new XPS 2720 has this problem! My company bought 5 or 6 2720 XPS for management staff, I noticed this problem too, you tap the bright ejection in the lower corner on the right monitor, nothing happened. you use the button on the keyboard that is nothing past?

  Feel really strange, it's something so obvious a problem, why there is no solution, I missed something? It is very annoying, can someone help me with this?

  Thank you!

  CICI

  Salvation all of Spain, I had the same problem with my new XPS 2720. The eject led in the monitor has always been on and didn t work, didn t of ejection. At least in my case the problem started when I updated to DELL OS app to the latest version (007) available in the Dell download page drivers. I uninstalled the new version, reinstalled the earlier, 006, and the led has started working again as it should (lights only when a disc is pushed in and when the disc is ejected). I hope this helps you all.

• ATI Radeon 9200 does not not on Windows 7 PC.

  I have my dads old ATI Radeon 9200 and im sick of using an integrated graphic card card because I can not play on it.

  The 9200 fit into the slot on the Board, but when I plug my monitor inside that nothing comes on the screen.  I could do

  something wrong? Please help I want to play better games it is the best card I got for the moment.

  UPDATE: thanks to both of you who responded.  Guess I should get a better video card.

  The latest drivers for ATI Radeon 9200 drivers are for Windows XP Professional (see link), so I guess that what you have is a problem of compatibility. You probably also have a problem with DirectX. ATI Radeon 9200, is only DirectX 8.1 Compatible, more nothing will work.

  http://support.AMD.com/us/gpudownload/pages/Radeon-prer300-XP.aspx?type=2.4.1&product=2.4.1.3.27&lang=us&Rev=&OSType=Windows%20XP%20-%20Professional/home

• XPS 420 Blu Ray does not play because of the HDCP copy protection

  My powerDVD program displays an error 0110 that she cannot enable HDCP encryption and stop play on blu ray movies using the DVI - D connection. Plays well with VGA cable. Video card Radeon 2400 with the last driver and is HDCP. Monitor is 2408WFP and is supposed to be HDCP DVI port. Windows XP Service pack 3.

  Blu - ray player plays 5 seconds of video correctly with DVI connection but then stops due to copy protection. I lowered the resolution (1920 X 1200 to 720 resolution vertical and the lowest was 800 X 600), installed the latest drivers, reinstalled the PowerDVD program supplied with the Dell computer.

  CyberLink has an Advisor on Blu ray and it indicates that the video connection is NOT HDCP (the monitor). Everything happened. I am aware of the program AnyDVD HD but prefer not to have to buy.

  Any help would be appreciated. Thank you

  
  

• Dell XPS 13 9350 Eve does not

  Hi, I'm using XPS 13 9350 variant for these days, but suddenly today, "sleep" mode is not work, so I turned down the cover and put the laptop bag backpack. After two hours, when I got out, it was extremely hot that falls asleep. I tried to put it manually no standby, no luck, power options it is already fixed to to sleep when the cover is off. When you manually give mode 'sleep', he turns down for 1 second and back again. What is the solution to this? Feedback is very appreciated. Thanks in advance.

  Hey Rishi,

  Thank you for your support. So far the update of the BIOS seems to work, as I also tried system restore and checking the local account but not luck. After the BIOS update, it's going to mode standby. Thank you again once, will let you know if it happens again.

• Desktop Dell XPS 8500 - Raid config does not

  All-

  I received my new 8500 a few weeks ago '' that came with only (1) 2 TB HARD drive which has been loaded with the W8.  For the last week or two, I was setup with additional drives / cables / etc.

  So now I have a 120 GB SSD that I use for the primary HARD drive I rebooted W8 on (due to the demand of the reinstallation discs) and also bought an identical 2 TB Seagate drive to set up a Raid 1 (mirror) configuration.

  So inside it is connected like this:

  SSD 120 (main OS drive) connected to the Sata port 0

  DVD player - connected to port Sata 1 (white block... "I think that his port 1 but on the bios, he said port 5?)

  2 TB HDD - connected to the Sata 2 port (second of the card)

  2 TB HDD - connected to the Sata 3 port (again on the second series of the map)

  I am eager to have both drives of 2 TB for the storage of data and when I record something on the first disc of 2 TB, I want that this mirror to the second disc of 2 TB for backups.  I want to keep the 120 GB SSD for just the OS and applications I can load later.

  Now, everything looks fine on the disk management.  I have my main drive C: (120 GB SSD) / one of my 2 TB like H: / and the other 2 TB in M:

  Everything has been initialized, configured, etc. under disk management (allocated all the space for the to 2 discs)

  So I read tons of discussions and documents online and I know how you go into the BIOS and change Sata from AHCI RAID option.  When I do this I select to save changes and exit, and the pc tries to start up... gets to the Dell Logo and then fails.  He opted for the stop and restart and new come to the same part and stops.  She continues to do so until I go into the BIOS and change back the settings of Raid AHCI save / quit and it starts right in the operating system?

  Not sure what the heck happens... any help would be greatly appreciated!  Thank you

  JackShack-

  Just wanted to report and let you know that everything was fine.  I've initialized, created a partition, did a quick format and everything is visible in 'My Computer' as expected.

  Before closing this thread, I just wanted to take your brain with some questions about the current configuration:

  1. whenever I have restart / reboot the pc, the RAID ROM or whatever the splash screen appears for a few seconds and I can't see where I configured my readers and everything looks good, then it goes into start the OS?  I guess it's normal to have the pc to start with this config RAID ROM because I configured the RAID parameters?

  2. in the BIOS to get the RAID set, I had to change settings such as "Secure Boot" (from activate to disable) and "Start Mode" (from UEFI to Legacy).  I guess these are the "required" settings for RAID work on the pc and I would like to leave them alone?

  3. when I boot up the OS and I go to the management of these two disks or workstation (1) only one of my drives of 2 TB arises (I know it is because I have RAID configured in RAID 1, so since it is mirroring its only showing a single disc.)  BUT how do I know in my mind that my data are successfully copy through two drives if only one shows?  I just take it for granted that everything is working as intended, or is it possible to see the data on both drives?  Just curious...

  In any case, I think that's it.  I just wanted to say with real sincerity that I really appreciate your patience and all your advice and guidance while trying to get RAID configured on this computer.

  Thanks again!