2000-2313tu HP: installed update Bios on HP Notebook 2000-2313tu bad

Similar Questions

• Portege 3410 - how to update BIOS and install XP?

  Hello, I have two questions on Portege 3410.

  First: I can't update the BIOS (current usage, 1.50 there, I want to update to 1.60). Instruction does not work: I connect Teac USB into USB port, turn on the USB - FDD emulation to activate, portable switch with pressed F12, the message «Ready to update BIOS...» "appears, I touch in a hurry, but nothing happened. What's wrong?

  The other: I can't install Windows XP on laptop (it does not start from USB disk or external USB DVD drive).
  How can I install Windows?

  Thank you.
  Mikhail

  Hello

  Just a question: why do you want to update the BIOS? Is this really necessary?
  I ask this question because this update is always somewhat risky and you might damage it ROM module
  In any case, have you tried to load the default settings in the BIOS before you start the update and install XP?

  You can install XP without CD. Therefore, you must copy the folder i386 on the HARD drive from another computer and the boot to the HARD drive files, I think you need a little search with Google to find a workaround for this. You should find enough! ;)

• Satellite Pro U200: update BIOS - Toshiba common Modules is not installed

  Hello

  When I install update of the BIOS P0044v370 I have an error "Toshiba Common Modules is not installed.

  My laptop Toshiba Satellite Pro U200 with Windows XP Prof

  Pleas help me

  PS. I Don t have a Toshiba Recovery disk

  The message is pretty clear!
  The common Module is not installed and therefore you can not update the BIOS.

  Visit pilot European Toshiba, download the common Modules for Win XP and install it.
  Then you should be able to update the BIOS.

  Concerning

• E1-510 Acer with windows 10 installed, should I update bios 2.12 new version I have now 2.5

  I have an acer laptop e1-510.  I have upgraded to windows 10 then clean installed the operating system.  I went to the acer site and there is no windows 10 drivers than ect, but I have noticed that there are updates bios newer than the one I installed.  I now have version 2.5.   The latest on the site is 2.12.  do I need to install all of the bios updates or just news?  Im very afraid of something going wrong, it is a laptop, I bought for my mother and don't want to spoil the bios because it makes a computer useless without reprogramming or a new bios chip.   Thanks to anyone who can offer assistance on this

  You can flash the 2.12 directly, but please follow strictly the instructions on the PDF file.

• Portege A600: cannot update bios 3.0

  My current bios version is 1.6, the latest is the 3.0
  When you try to update the bios, I receive an INSTALL2 APPCRASH. EXE
  exception code c000005

  I tried to start it in safe mode, but that deer does not help

  Thanks for help

  Hello

  The istall.exe should not breaks down and you should not update the BIOS in safe mode!
  Windows should be started and should work properly!

  This is a Toshiba FAQ How update BIOS:
  http://APS2.toshiba-tro.de/KB0/HTD9502M10000R01.htm

  Eventually the error code is related to corrupted windows OS or some tools from Toshiba is missing.
  Using Win XP the common Modules must be installed.
  You are using Vista or Win 7 VAP (value added packaged) must be installed.

• Don't recharge Tecra S11-119 - updated BIOS question too!

  My computer is a year. It was quite well, until I noticed that he had ceased to charge the battery. After some googling I found that there could be an update of the BIOS, that I had missed. When you try to install the BIOS update, I get a message saying I need to plug in my computer first (which is always that the dough is not a charge).

  BIOS update program says he wants to be updated as follows:

  BIOS version: current Ver.2.60--> updated Ver.3.20
  THIS Version: Current Ver.1.80--> updated Ver.1.90

  OS: Windows 7
  BIOS file I downloaded: bios-20110714132558

  Is this a known problem with a fix available?

  Hello

  Are you sure that you have downloaded and used the good version of the BIOS.
  I have read about similar error message and finally the used user isn't compatible BIOS.

  In addition the VAP (value added package) must be installed to update BIOS! In case you, I recommend you to reinstall this tool too.

  But I'm not quite sure if the BIOS update will help you solve the problem of battery m
  Maybe you need to replace the battery

• Question about updating BIOS for my Satellite M40

  So, my laptop does not start, but works recovery procedure. Support suggested me to update my Bios.
  OK, given that the last time, it was easy.

  I downloaded the newsest version vor my Satellite M40 (PSM40) (1, 70 - WIN<= i="" have="" an="" ati="" grafics="" card)="" and="" extracted="" the="" bios-20070709161345.zip="">
  But there was a surprise:
  Instead of getting the old data structure, as written in the FAQ update Bios
  1 extract the zip file containing the BIOS upgrade to a temporary folder.
  2. in the folder temporary three subfolders will be generated. "docs", 'Update - 3.5' disc', 'Update - CD - R or CD - RW"

  I get a file only: BIOS of Windows Knockhill10GV170.exe
  Extraction of it I get 8 files:
  -fdbase.img
  -InsydeFlash.exe
  -iscflash.dll
  -iscflash.vxd
  -KPM170. ROM
  -Platform.ini
  -The c:\windows\system32\unicows.dll

  Now my question: How can I create this bootable CD-ROM to update my Bios?

  Just to know: download all the other things are done on my desktop from my laptop is not starting ;)
  I also tried to run the exe in the hope that it will create a floppy disk or a CD-ROM, but it is written "basic cfg address not found."

  Hello

  Update the BIOS there are two ways to do this:
  -Traditional mode (TRAD) and in this case, you need floppy
  -Windows (WIN) and this update can be done under operating system running.

  Update BIOS WIN will work if you run Windows on your laptop satellite. If I understand your assignment well you are trying to do traditional BIOS updated, but using the BIOS to WIN update. On the Toshiba download page, there are two listed BIOS updates and two of them as versions of WIN. This means that you can update the BIOS under operating system only.

  Back to your problem: in the history one thing confuses me when you write: my laptop does not start, but works recovery procedure. Sorry, but if the recovery procedure is working and you will have clean installed OS.

  Be a little more concrete in our laptop does not start. What happen exactly when you press the power button / stop?

• Satellite T135 - update BIOS 2.70 won't be finished

  I have a Satellite T135 Win7 running with an original BIOS that I'm moving to 2.70. I ran all the other software updates in Service Station (2.1.51) with no problems. but the BIOS downloads 2.7, initiates and cautions that I'll need to reboot (I select Yes to execute) and receive notice of popup on the electrical problem (defective DC) which corrects this BIOS, then nothing. It just stops.

  I disabled my firewall windows antivirus, but the update is still unable to fill. I downloaded the file directly from Toshiba (outside the Service Station) and run the file and exactly the same thing happens.
  The event viewer shows all the related entries.

  Anyone has an idea on how to get the updated BIOS up-to-date?

  Hi mwarwick,

  Did you install any new version of package of added value of the Web from Toshiba site? This program is necessary if you want to update the BIOS to check if you have installed the latest version.

  In addition I recommend you load the default settings in the BIOS before doing the update. Then, go into the BIOS, press F9 to load the default values, save & exit it.

  Can update you the BIOS now?

• Update BIOS of 1, 70 - WIN on Satellite Z830-10 t - computer not supported

  Hi all

  I am installing the update of the BIOS 1, 70-WIN of 09/12/12, delivered in a folder called "bios-20120907140253', unsuccessfully zip.

  Whenever I run the .exe file, I get "this computer is not supported" returned in BIOS Toshiba package Ver.4.2.1 window.

  My laptop is PT22LE-00E004EN.
  Software from Toshiba Tempro advised me to install this BIOS update.

  Is that what someone else has this problem, and is there a solution?

  Thank you

  Rob

  In my opinion, you need not update the BIOS, even if the new BIOS has been updated.
  I have a laptop works perfectly with the old BIOS and I don't have day to a newer version, even if the new updated released

  However, I found really interesting thread with a solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=66787

  Here's another thread with the same error message:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=68345
  The solution-> retrieve the laptop initial configuration by using disk HARD recovery and try again.

  PS: do it before this try reinstalling the VAP

• Update BIOS Z830 satellite

  Hi, everyone tried to upgrade the BIOS Z830.
  After I rebooted, I get a message to insert an original disc of Windows, but Z830 has no optical drive and more I don't have a Windows disk, since that it is pre-installed?

  I went back to the store and they plugged the USB optical drive with an OEM of Windows version and I entered my ultrabook, but a day later I got the same message to insert an original disc of Windows after a re-boot without me even trying to upgrade the BIOS, it seems that the upgrade of the BIOS did not the first time!

  Why update BIOS asking for an original Windows disc? Any thoughts? Thaks!

  Hello

  Please try this:
  Switch on and press F2.
  This should allow you to access the BIOS.
  Press F9 BIOS this will outline the BIOS default settings. Press F10 to save the changes.
  Now start the machine.

  If you will not be able to start Windows. Try this:
  Turn on the computer and press F8.
  Now you should see a menu of advanced boot.
  Here choose fix my computer-> drive HARD recovery.

  HARD drive recovery will start the recovery procedure, without the use of all disks.
  This will help you define the laptop back to factory settings.

  Hope this can help you.

• Satellite Pro M30 - error message: the user is not authorized to update BIOS

  Hello

  I bought a Satellite Pro M30 of second hand. This one has the Bios 1.30... I would like to install the bios v1.70.

  I am running Windows XP Pro SP3 and tried first update in Windows.
  I however got the message "the user is not allowed to update BIOS.

  This message is quite surprising given that I have administrator privileges.

  I read that you can use a floppy disk to update, but I did not...

  So, is it possible to update the Bios with the CD?

  See you soon,.
  R.S.

  Hello

  I checked the page European driver of Toshiba and found the version of BIOS 1.7 WIN in the field of ARCHIVES.

  As you can see, it's a version of BIOS Windows and not a traditional version of the BIOS (trad BIOS can be updated using the diskette).
  This BIOS win can be improved only from a running OS Win.

  In any case, I see that you have installed SP3. It could have a bad influence on the update of the BIOS.
  Then maybe you should try to update the BIOS without SP3 installed?

  Remove SP3, download the good BIOS, unzip correctly and then try to run the BIOS update file.

  _Ps: If you laptop then runs without problem a BIOS update is not necessary! _

  Concerning

• Laptop HP 15-ac176na: update BIOS (Intel processors)

  Hello

  I was download the updates from the HP support Assistant.  3 updated driver installed fine, but the update BIOS for Intel processors just to be on the road all day.  It seemed to download ok, the blue bar filled and he said that it was installing, but never finished because I had to stop going to bed.

  How long does take to install?  HP laptop laptop 15-ac176na.

  Thank you

  Paul

  Hi Paul,.

  There seems to be a listed version between your and the update offered - F.1E Rev.A (provides microcode update CPU)-the HP bios updates are almost always cumulative, but I saw a few times when it's bbe made in order, then it can be interesting to see if F.1E Rev.A Flash correctly - if this is the case, try to rerun F.1F Rev.A

  F.1E Rev.A is on the following link

  http://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74374.exe

  Once the download is complete, close other open windows and programs, then open your download folder and double-click the installer to start the process.  The real flash will occur when you restart the machine - do not interrupt it somehow, even if nothing seems to be happening for a while - when it is finished, the machine will load in Windows as usual.

  Kind regards

  DP - K

• Tecra M2 - updated BIOS is not supported

  Hello; I have a Tecra M2 I want to update BIOS.

  I downloaded it from the Toshiba site, specified for this model. But when I unzip in my book, there is a message that says "Bios Update v. 3.2.8. This computer is not supported. But my laptop is a 32-bit computer, and there is nothing strange about this... What is going on?

  I need a help. (It's only a simple update BIOS...)

  Thank you

  J.

  Hello

  The Bios Update v. 3.2.8 error message. This computer is not supported"might appear because the DMI information that contains the name of the laptop and other details of s notebook is wrong.
  In this case the DMI must be updated.

  The other reason why you are not able to update the BIOS, it is this tool called common Modules is not installed on your laptop.
  So install it and check if you can update the BIOS

  Last but not least, the reason could be the preinstalled OS, I hope you are using Win XP in order to update the BIOS

• Tecra R840-PT429E - update Bios message: this computer is not supported

  When I try to install the bios update 12/09/12,3.90-WIN(EC_KBC1.60) I get the following message: this computer is not supported.
  Updated the BIOS, I downloaded from the section of the Bios Toshiba for Tecra R840-PT429E update, windows7 64 bit.

  Hello

  Is the a reason to update the BIOS or you want to update the BIOS simply because the new BIOS is available?
  You have a serious problem with the laptop?

  I have no day BIOS, even if the new BIOS is available for my laptop because I have no problems.

  However, the BIOS requires the VAP (value added package).
  This package can be downloaded from the Toshiba UE driver page
  If there is a problem with the VAP, the update of the BIOS would not start.

  So reinstall the VAP to check if this may help

• Update BIOS on Tecra 8200

  After you install Windows XP Home edition on the original 2000 I lost most of the public services.
  Have downloaded the new BIOS and utilities, etc., but can't install the BIOS because it requires to be loaded via floppy disk, and then press F12.

  * I don't have a floppy drive on this machine. How can I load the bios via CD, memory stick or another way? *

  There is a list of methods how to install the new bios [here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000000b07]

  I hope this helps!