2164US dv4: DV4 CHG to SSD disk / recovery does not work

Similar Questions

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• Dfrg.inf is missing that is no doubt why Disk Defragmenter does not work. How can I recover it?

  How can I recover dfrg.inf?  It is absent and is probably the reason Disk Defragmenter does not work.

  An alternative Defragmenter that I use is defraggler is a free download at www.piriform.com/defraggler/download/standard

• Hi, I just realized my disk drive does not work, can anyone help

  Hi, I just realized my disk drive does not work, I never use watch cd or dvd, now I am installing a norton internet security 2012 after that I put in the cd, there is no response, anyone, please

  Hello

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If the drive still does not work, open all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• Disk Defragmenter does not work.

  My Disk Defragmenter does not work... He asserts that he is defraging but the hour glass just stay there.  I tried to solve by disabling the Scheduler, but I am unable to take the green check mark in the box that tells me that this scheduler is enabled... Help, please

  Hello

  in vista, the defragmentation process works silently in the background

  you do not have to run it manually

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

• System repair & Recovery does not work / Vista Windows Mail won't open attachments sent with PowerPoint Slide Show

  System repair & recovery does not work.  When I use it, it never restarts the computer.  I have left running and went to bed and is still running the next morning.  The SR & R is grayed out and will not open.   When I restart the computer after that it ran all night, a message appears to tell me that I cancelled the operation.  Help!

  I have another problem with Vista Windows Mail; I can't open attachments are sent using Microsoft PowerPoint Slide Show.  The message is: * this file does not have a program associated with it for performing this action.  Create an association in the set Associations Panel.  I don't know anything about computers or the control panel.  How can I fix these problems?  Help!

  Problem with recovery to factory settings or system/process of repair software, contact the manufacturer of your computer.
  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You need PowerPoint or a viewer PowerPoint installed on your computer to read PowerPoint attachments.
  Learn about file Associations in the lower part of this response.

  need .doc or .docx Word or a Word Viewer for playback file extensions, etc, etc.
  .xls Excel need.
  need for .pps PowerPoint

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  And to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• Drive HARD Win 7 recovery does not work on Satellite L750

  Hello

  I have the Toshiba Satellite L750 with preinstaled win 7.

  I instaled the upgrade to win 8 (from dvd).

  After that I improve the MS site to Win 8.1 System.

  The system does not work properly (DVD is not recognized) so I have to install previuos system.

  First of all, I'm improving my BIOS for the new one - 3.60.

  After that I try to win 7 reinstal my HDD recovery (which is located on the d partition). But it does not work: it has been impossible to start recovering in the menu of the bios (F8 key does not work, it was only possible to press F2 or F12).

  So I have to install my dvd 8.0 Win and now I have it and it works. But this is only a clear system without any addons like nero, ms office etc.

  My question is how do reinstal win 7 of my hard drive recovery that I always on the d partition?
  in the bios the F8 key does not work.

  After clean OS installation installation of HARD drive recovery not working anymore. If you want to have the original image of recovery preinstalled on your machine, you must use recovery DVDs.
  I assume that you did not create this disc, right?

  In the user s manuals document clearly described how it works with the image recovery and the creation of recovery disks.

• System recovery does not work?

  I have a HP Pavilion dv2910us, and I need to perform a recovery system on my laptop. I tried to press F11 when the computer starts, and it does nothing except it emits a loud beep and continues on its way, commissioning. So when it does not work, I came across the site of HP to look for another way may be to perform a system recovery that I never knew. I found that I can open the Recovery Manager in my Start menu and run the operation there. I tried about 15 times, following the specific steps that were given to me and even another way, that I found on the forum. All that happens is my computer restarts and I get into my account and it's the same as it was before. I really need perform this system recovery. I already moved the files that I need to save to an external hard drive, and I really need to solve this problem. What I am doing wrong, or how do I restore my laptop to factory in another way?

  Additional information: my product number is FE989UA #ABA and the series is 2CE8200Y5Q.

  Message edited by snowshoe on 24/07/2009 22:36

  sha3ko wrote:
  I have the same problem, and from what I know, if you have upgraded or downgraded your computer (in other words, if you reinstalled the operating system other than the original) it will cause corruptions on the recovery partition in drive D. I tried to find a way to retrieve the recovery partition, but it seems that there is no way unless you are a computer genius. My final solution just order a set of hp recovery disks, but I'll try that before I pay for it. Good luck with yours.

  Try this >

  1.right - click on the "Computer" icon and select manage.
  2. This will launch the Microsoft Management Console.
  3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.
  4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."
  5. when the warning message appears, select 'Yes' - restart the notebook and it will automatically start in the Recovery Manager without having to press F11.

• My new laptop has crashed and disk backup does not work, can download a boot disk for Windows 7, I hit legitimate?

  My Acer 5745 laptop crashed, my backup boot drive does not work. The laptop was running Windows 7 when I bought new in November 2010. Y at - it somewhere that I can download a floppy or a recovery disc?  'The Source' store where I bought will not help, they said they had to go back to Acer and it could take up to two months to return to a charge of about $170.

  Thanks for any help, someone might be able to give.

  A laptop bought at that date will still be under warranty, there should be no costs involved, contact Acer technical support.

  I guess by the backup startup disk, you mean the set of recovery disks you did when you first used the PC?

• Equium - dead after hibernation, the system recovery does not work

  Hello
  I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

  She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
  So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
  I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
  I removed the battery and put back in place, without result.
  Connection to an external monitor shows no results.
  When I put the original CD recovery Toshiba, no results.

  So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

  Any help or ideas would be very appreciated! ;)
  Daniel

  Hello

  My laptop could not wake up after hibernation too but I managed to wake up again.
  This;
  Disconnect the power adapter and remove the battery.
  Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

  After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
  This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

• CD-ROM for Portege 3500 recovery does not work!

  I have a Portege 3500 tablet pc and the recovery cd does not work.
  I followed the instructions but nothing happened to my windows again!
  Can you tell me please how can I get my phone?
  Thank you

  Hello

  AFAIK the Portege 3500 dose does not support internal CD/DVD players.
  Have you used an external hard drive that is compatible and supported for boot from the CD?

• HP Pavilion: Disk drive does not work even after I have installed and uninstalled

  Hello

  The disk drive on my laptop does not work. It does not recognize the CD or DVD. I tried to go into the currency manager and uninstall the drive and scan the image but it does not work.

  This error appears when I look at the properties of disk drives:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  I don't know what else to do.

  Thank you.

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• my disk driver does not work or even showed that I have have I have the driver on my compyter

  on 'My computer', it shows same (on hard disk drivers) I have a driver cd, and when I put a CD looks like it's trying to work, but nothing happens.

  How to fix this?

  Hello

  Did you of recent changes to the computer?

  This problem may occur if one of the following scenarios is true:
   
  1. pilots of filter in the CD and the DVD storage stack are not migrated successfully to Windows 7.
   
  2. you uninstalled CD software that fails to withdraw properly in the registry.
   
  3. that you have installed a software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  I suggest you first click "Run now" article.
   
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If this does not work, manually follow the steps indicated below the articles.
   
  The CD drive or the DVD drive does not work as expected on a computer on which you updated for Windows Vista/7
  http://support.Microsoft.com/kb/929461

  Registry warning

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Windows 7 Disk Defragmenter does not work

  All of a sudden, I get the following error message when you try to run Defrag

  "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again.',

  that does not work.

  Assuming that task scheduler was enabled and the Defragmenter tool still does not work, here is a routine that I have compiled over time which proved to be effective to solve the problems of Defragmenter:

  There are several reasons why the built-in Defragmenter may not work correctly:

  0. it is malware on the system. Solution: Run an anti-virus control and also a spyware check.

  1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  2. the disc is damaged and must be repaired. Solution:

  a. open "My computer" and right-click on the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  3. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:

  a. start - all programs - Accessories - System Tools - System Restore (click here to open);
  b. Select a good restore point before you start having problems with Disk Defragmenter.
  c. start the restore process and let an end (descriptive name of something restore operation as "Repair Defrag").

  4. There are other programs that run the Defragmenter interruption integrated. Solution:
  a. close all running programs.
  b. If you think there may be some programs that run in the background.
  c. press Ctrl + Alt + Delete and
  d. Select "start Task Manager".
  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  5. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  6. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking interference may not be easy. Note: Some versions of Windows 7 disables the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.

  7 Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

  There are several ways to re - install the built-in Defragmenter:

  A:
  a. open the menu 'start '.
  b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
  c. in the window that opens, find the file named "dfrg.inf.
  d. right-click on "dfrg.inf" and "install".

  B:
  a. go into "start > run" on your computer.
  b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
  3. click 'OK' to make the program automatically reinstall itself.

  C:
  a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
  b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
  c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing Defragmenter files.

  8. most of the problems will be solved by #6 above, but if not, and if your windows installation is otherwise working well, you should consider to download a free trial of a Defrag tool commercial rather than drastic measures to restore the functionality built-s. Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.

  Most third party programs offer a free, fully functional trial (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...

  Here's a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:

  http://Disk-Defragmenter-software-review.TopTenReviews.com/
  Place it at the top of the page is the only defrag program that also prevents the fragmentation (see comment).

  Why is it good to prevent fragmentation?

  Basically, it significantly increases life expectancy of your hard drive (especially since you don't have to leave the system on all night - a much 'greener' agricultural practice), not to mention it also increases the performance of the system.

  Find out what the review has to say on this.

  Good luck to you!

  Bill R TechSpec

  PS: If still no go, repair may involve editing the registry or repair installation of windows and possibly re - install windows itself. These aren't simple solutions. If so, indicate if they can be provided.

• Mac mini (late 2012) flashing - question mark folder recovery does not work

  Hi all

  earlier today, I upgraded my Mac mini (end 2012) to the latest version of macOS Sierra.

  After 1 hour of use, I realized that many of my plugins FCPX were not working.

  I contacted the developers, and they said does not update the plugins and they told me to go back to El Capitan.

  I decided to listen to them and try to downgrade my OS.

  I restarted the Mac and held down Cmd - R or something like that that took me to the disk utility screen.

  Then I went down to dinner, and when I returned 30 minutes later my Mac had entered the sleep mode for some reason any.

  I woke up the Mac and 40 seconds later the power went out for 5-10 minutes.

  After the blackout, I restarted my Mac that took me to a black screen with a flashing question mark folder.

  I followed some tutorials online (including how to enter get - and the recovery of internet mode), but after a while even restoration of the internet shows me the flashing question mark folder.

  I don't know what to do.

  And no - unfortunately I don't have a Time Machine backup.

  But I have a backup with all my most important files.

  Is it possible to force the Mac to reset itself or something like that?

  Help, please.

  Best regards

  Filip

  Mac mini (late 2012)

  I7

  16 GB OF RAM

  500 GB Samsung SSD of 840 - evo

  Graphics Intel HD 4000

  What happens exactly when you start Internet recovery

  by pressing Command + Option + R at the start of the OS X Internet Recovery*.

  and go to disk utility and repair the startup disk?

  If repairable, the startup disk to format and install OSX via recovery. you install Mountain Lion or dependent Mavericks when the Mac was made. Then OSX you want.