8500 a909n AIO wireless scanning

Similar Questions

• OfficeJet Officejet Pro 8500 has more eAiO Scan to computer scans only part of the Document

  I am trying to scan my Officejet Officejet Pro 8500 has more eAiO scan to my iMac (Mac OS X 10.6.8).) IT scans only part of the document is scanned. However, when I copy it, the entire document is printed. I was looking for, if I could change this on the officet, or the system of preferences on my mac, but couldn't find anything on the 8500. On mac, I could change something, but it was only the scans on insiders from my computer.

  Scanning directly from the Officejet comes in very handy when the digitization of books, with one hand, I have to push it and the iMac is not in reach of the officejet...

  Otherwise, I am very satisfied with the printer and everything works fine...

  Thanks for any help.

  iMac (Mac OS X 10.6.8)

  Hello

  I hope you feel better now!

  Please specify the exect option that you use to scan from the control panel of the device.

  What exect icon are you clicking after selecting the scam?

  If it is computer, try to update the latest version of the driver and check if the Scan shortcuts Manager do not appear:

  Click the Apple icon, then software updated. Be sure to select any update HP available.

  If you don't see the specific option yet, you will need to delete all HP software installed completely and install the latest version:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Download and install the latest driver below:

  http://FTP.HP.com/pub/softlib/software11/COL34340/MP-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74.dmg

  Finally, update the latest driver by clicking the Apple icon, then software updated.

  If you use another method of scan, please specify which option you use.

  Kind regards

  Shlomi

• HP Officejet Pro 8500 A909n: HP Officejet Pro 8500 A909n - heads will not snap.

  HP Officejet Pro 8500 A909n - heads don't align.

  -replace the heads-get green light in the HP utility on both

  -replace the ink

  -reset printer.

  He's still not the alignment - mires look OK (2 and 3) with the exception of the verticle (focal 1) lines

  second line 3 game are a little out of the middle (vertical)

  Anything else I can try?

  Hey @bgflyer,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the alignment of your Officejet 8500 first all-in-One printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve problems of alignment with your printer.

  If after the above, that you can't always line up, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8500 A909n

  I have a HP Officejet Pro 8500 A909n I've had for a while.  Recently it from printing in pink even though my settings was to black ink only.  Then he stopped and started printing in black.  Want to know what caused this.

  Also, I wanted to know if in order to print in black so the color cartridges have ink inside.  I read somewhere that the carridges themselves must be in place, but he said not that the color cartridges must have ink inside.  I do not use color and don't want to buy new cartridges of color if I have to.

  Would like to help on these 2 points.  They can even be linked to the problem.

  Thank you.

  Hello @JCooper615!

  Thanks for posting on the HP Forums!

  You mentioned that the printer printed pink when you had selected only black print cartridge.  I'm not exactly sure what caused this, but I can provide a few suggestions that can prevent it from happening again.

  Its possible to print to the printer head needs to be cleaned.  To perform a printhead, cleaning the printer just tap the "setup" on the screen of the printer.  Once your menu setup press "Tools", and then press "clean printhead".  The printer will run the print head cleaning and print a report.

  Another thing that I suggest is to remove the printheads and clean them manually.  Sometimes the ink can fog up on the copper of the print head contacts.  This can cause a bad electrical contact and may result in poor print quality.  For instructions on how to clean the printhead manually, click on: http://support.hp.com/us-en/document/c01609042

  The printer takes 4 cartridges and 2 print heads.  The print heads are making to put ink on the page and they need to be replaced at any time.  If the problem persists, you may need to install a new print head.

  You also want to confirm if the printer needs color cartridges to print.  The printer requires all of the ink must be installed to be able to print.  If a color cartridge is empty, then the printer displays a message that it is unloaded.  The message will not disappear until this new cartridge is installed and will prevent you from printing.  When printing in black the printer still uses a small amount of color.  This is to ensure to don't clog the tubes of ink and the print heads do not dry out a lack of use.

  Some printers cartridges that have integrated print heads.  Some printers as the ENVY 5530 and Officejet 4630 do not require the color cartridge too be installed to be able to print.  They can print mode single cartridge.  So if you exhaust your colors you can just take it off and continue to print in black and white.

  Thanks again for the display on the HP Forums!

  Enjoy your day!

• 8500 HP OFFICE JET PRO 8500 A909n error: B87126D0, unit will not turn off or print

  I'm having the same problem as described by others, "error of 8500 HP B87126D0, unit not turn off or print.

  I followed all the instructions from documeneted on this thread. I also replaced the power Module, in the hope that would solve my problem. I have an OFFICE JET PRO 8500 A909n PRIME

  Not sure why the solution cannot be posted here, as I see many others with this same error and the exact symptoms.

  Whatever it is, I really appreciate a solution 'private' as well.  Really, I love this printer and would rather not have buy another.

  Thanks in advance!

  Hello @rnegron57,

  Welcome to the Forums of HP Support! I see that you have found an error code on your HP Officejet Pro 8500 first, you are unable to power the printer on or off.

  You have completed the recommendations online without success, and you've seen other members of the community receive private messages. I would like you to take a look here: printer resets: What You Should Know

  I went ahead and you sent a private message, please go to your user page to the right of your name, you will see your Inbox.

  I'll watch for your reply, I would like to know the results.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• OfficeJet Pro 8500 A909n Firmware update froze

  I was trying to update my firmware on my HP Officejet Pro 8500 A909n. During installation, the installation froze. I was connected via my USB to the printer. There was a progress screen on the LCD of the printer that shows the numbers 1-5 with small squares under each of the numbers that were either low-light or highlight according to what stage or the status of the update on that. There was also a progress under the numbers bar. The update in the impasse with the square under the number four was highlighted and bar ceased under the number one growth. After 3.5 to 4 hours waiting for the update to complete, I had to kill the process of updating. Try the update again the model search engine can not find my printer and the printer lcd displays a circle with a helping hand to 12:00 and below is a string "B8084644". I'm stuck. Have mercy on my soul... to help

  Sent you a private message.

• OfficeJet 8500 A909n scanned of the impressions of image reduced to 0.25 "

  I did a complete new installation of new drivers for intsaller version 14.0. Scan solution Center (8.5x11.0"using the bucket, original in the upper right corner) looked precise and saved as a picture. PDF file.  I then printed with Adobe Reader and Readiris Pro 11 and they both printed the reduced image "1/8 on all sides (sometimes 0.25" up and down) - I could now see the page border line that wasn't in the picture displayed by the Solution Center scan (I have crops 8.5x14 in 8.5 x 11).

  How can I get an exact copy as what I get when I use the 8500 as a manual Copier?

  Shane_R HP provided the following information:

  It is not a question or a problem with the duplexer.  It's just how it works.  The duplexer reformatted the verso of a print out differently than it does the front.  Inkjet printers, it leaves space so that the ink will not smear.  Laser printers, it leaves space to avoid the toner smears.  It's just the way is designed the duplex function.

• 8500 a909n scan & print of Readiris Pro 11 and Acrobat 10.1.3 is distorted

  Scan doctor says everything is OK, but Readisis 11 pro and Acrobat 10.1.3 scans fall dpi required (600-> 300) and when the scan is printed, the image is shrunk and 0.5 "white space is added at the top and bottom. Said update drivers are up-to-date (Windows 7-64 bit, HP a909n, Readiris pro 11, & Acrobat 10.1.3). Kaspersky full scan shows no virus. Readiris is unable to find the edge unless the page is in the middle (flat). See the native mode is defined, but no properties don't pop up. . Properties continue to change at random analysis from page to page (front and back).

  It's the thing.  It is not a question or a problem with the duplexer.  It's just how it works.  The duplexer reformatted the verso of a print out differently than it does the front.  Inkjet printers, it leaves space so that the ink will not smear.  Laser printers, it leaves space to avoid the toner smears.  It's just the way is designed the duplex function.  I'm sorry.

• After the installation of 8500 a909n printer works wireless for a few months and then quit?

  Wireless worked for two months after the installation of replacement printer, then he stipped works, but still compatible with USB. Technical support phone could not operate either. What should do?

  Nothing that I said. The printer was a replacement for one that would not connect at all, then the tech team India talking my client through cannecting it then a few months later it stop responding wireless but worked hard when the USB is connected. I was able to remedy through the convenience store a couple of times and selecting the difficulty of choosing the default printer for the correct choice rather than the fax machine. I chose HP officejet (network). Thank you for your time.

• WIRELESS SCANNING HP PRINTER FOR MAC OS X LION DOES NOT - PRINTER SAYS COUNT NOT DETECTED?

  Hi there I just do a fresh install of lion on my Apple Imac - 27 "and did the UPDATE SOFTWARE Apple to install new drivers for my printer Officejet Pro 8500 A910. When I had previously snow leopard I used the installation cd to set up the printer and I could scan the computer to the printer - my computer is displayed in the analyze menu on the printer - after I installed Lion and did a new install of HP drivers via UPDATE APPLE HP prescribed this feature is not WORKING? Is anyone else having a similar problem? What is strange, is the UTILITY of HP software on the mac can see the printer - I can print to it - even USE THE SCAN SOFTWARE on the COMPUTER and BUT I can NOT put in WORK SCAN wireless using the HP printer menus? Any help would be welcome

  TO THE RIGHT, EVERYONE I'VE CORRECTED THIS PROBLEM

  HP has released a package of LION AIO for our printer - just go to the website of support for your printer and locate the AIO - install - package and you'll find EVERYTHING WORKS! -you will notice that they have improved the utility for Apple Lion HP slightly during the last row IT WILL BE SCAN TO COMPUTER and it will SHOW a GREEN LIGHT that says connected - THANKS a LOT for ALL YOUR INPUT!

• Canon Pixma wireless scanning with MBP 10.11.6 mg3220

  Suddenly, from one day to the other, the scan wireless function no longer works between my MBP (OS 10.11.6) and the Canon Pixma MG3220 printer/scanner. I downloaded the driver of Canon more up-to-date, but eliminating the possibility of using the Image Capture.

  How to restore the wireless function? Is it possible to uninstall this latest driver and reinstall the driver of the Mini Master of Canon, good through 10.8 OS?

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

• Installed Windows 7 on HP Pavilion 23 AIO - Wireless does not

  Hi, I installed windows 7 to replace the 8 windows pre installed on my hp pavilion 23 aio PC and network drivers came out. I managed to get lan to work by getting drivers Realtek RTL811F downloaded and installed from usb, but the wireless won't come back

  Anyone know how I can make it work?

  In the Panel, there are several troubled devices - network controller, peripheral pci, pci simple communication controller, sm bus controller and bus unciversal controller

  Hello:

  The drivers of motherboard of this model should also work on your.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5265168

  The specific drivers you need are:

  SMBus:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106361-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  USB:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106744-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-116781-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Try this driver for the wireless card. (The page on record your model does not show that it comes with the wireless network card).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106131-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  If this driver does not work, click on the network controller and view the ID of the hardware for it.

  Who can tell me what model wireless card it is, and I can post the link for the driver you need.

  If you don't know where to find the hardware ID, please read the guide at the link below.

  http://www.WikiHow.com/find-hardware-ID

• HP officejet Pro 8500 909: HP Officejet Pro 8500 909 has not scan after downloading Windows 10

  About 6 weeks ago, I downloaded Windows 10.  Today, I tried to analyze something and received the message "no Scan Options".  So I tried to go to the Hp Solution Center and who do not respond. When I was on Windows 7, I have had no problem scanning or with the HP Solution Center.

  Hello

  You will probably need to reinstall the HP software after an upgrade of the operating system.

  Please follow the steps for exactly the problem and check for the difference:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8500-all-in-one-printer-series---A9/3752454/model/3752455/document/c04714314/

  Section ' can not analyze after upgrade to Windows 10 "should apply, or the"HP solutions Center can not run"or 'Scan is busy or in use' error with a connected printer"if it's the exact specified error when you try to open the HP solution... Center.

  If you need to uninstall the HP software, uninstall it by running the following remove utility Uninstall_L4:

  http://ftp.HP.com/pub/softlib/software12/COL31044/MP-77037-4/OJP8500vA909_Scrubber_13.exe

  Kind regards

  Shlomi

• Wireless scan not working do not, but will print officejet 4500

  I have a Dell with Windows 8.1, HP officejet 4500 Wireless.  Work to find two days ago, but now my "HP Solutions Center 's" software does not see the scanner.  \

  The Solutions Center softwared (that comes with the printer controll scanning photos and documents) is back with a message: The HP Imaging device was not found.  Try the following steps that... None of them worked.

  See my PC to the printer, and I can print to the printer, but CAN'T SCAN.    Help me please.
  [email edited by Moderator]

  Hello @chuckg7kc , welcome to the forums

  I've read about the software problem that you encounter on your system Windows 8.1, as printing software does not work for you, and you see the error "the HP Imaging device cannot be found". I have some ideas in mind which may help you!

  Perform an uninstall of level 3:

  If the software has been downloaded and extracted to your system:

  1. press Windows key + R and type %temp% enforcement and press enter

  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

  3 open the Util folder

  4 open the CCC folder

  5. run the L3uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9. try a clean boot that turns off all startup programs. Disable all firewall and anti-virus too and try the installation again.

  10 download the drivers and full software features: here

  11. once the printer is installed, go back to the clean boot instructions to re-enable the startup programs.

  Good luck

• OfficeJet Pro 8500 has more: document scanning

  Several pages to the computer and save it as a file, but now he won't, until Apple upgrades my Officejet Pro 8500 has more opportunity to scan the whole of a scan of the page at a time.

  How to scan a document of several pages under the name of a file?

  Hi @Pinnacleport,

  I read your post and to see that since the upgrade to El Capitan, you are no longer able to scan several copies of a file. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I checked the site and the drivers are installed by the Mac drivers preinstalled. HP printers - installing a printer driver Mac using Apple Software Update.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet Pro 8500 has more)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  What application are you using to scan with?

  The only way you can save several pages in a single file is in PDF format. JPEG and other formats will save multiple documents as separate pages. In the printing and scanning window, select PDF and check combine in one document below.

  I hope this helps. If there is anything else I can help you, let me know. Thank you.