A4 DVI/Replicator

Similar Questions

• Two screens DVI on Port Replicator II with Tecra S10-160

  Hello to all 2!

  Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
  A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).

  My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.

  Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.

  Hope you got my point and have information or ideas for products for me.
  Thanks in advance.

  Hello

  Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.

  I mean such a cable like this

  Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)

• Portégé R600-102 - Port Replicator connection DVI on Slim 2 problem

  I'm setting up a work environment to double screen.

  I have connected my Toshiba Slim Port Replicator 2 (PA3603E-1PRP) to my monitor LG (M197WD) cable DVI - D single-link and Belkin (P35952ed) to another monitor via a standard VGA cable.

  Although the second monitor works fine, the display on the DVI connection turns off intermittently and returns after a few seconds.

  I am running Win XP on Toshiba Portege R600-102.

  Any ideas how to solve this problem?

  Elpadre

  Hello

  As far as I know that the TOSHIBA Mobile Extension software should be updated to the State.
  Real software version is 3.87.00.

  Go to the Toshiba European page and update this!
  Also, please make sure that the BIOS is up-to-date as well!

  The use of both VGA and DVI ports should be possible since the R600 are supported by this feature.

• Advanced port replicator II PA3082E DVI out

  Hello

  Portege M100, XP Pro, II advanced port replicator.
  I can get VGA out but not DVI signal.
  How can I switch to DVI output instead of analog VGA connector?
  I've looked everywhere, this option and even sought a separate driver, but always now light DVI.

  TIA,
  John

  Hi John

  I also have information that some units don't supports this interface. To be sure if this info is just make a call to the Toshiba service partner in your country. They have this kind of information.

  Good bye

• Portege R500 - anyone using the DVI Port Replicator II on WIndows 7 Beta?

  Hello
  I'm using the beta version of WIndows 7 on my R500 and runnig it's just well except the DVI Port (on the Port Replicator II Slim).
  I have installed this software Fingreprint, battery bluetooth (which are recommended as a solution by the Action Center) and the 'TOSHIBA value added together"which adds the management software of power supply, control over the 2 hardware buttons and gives the FN menu to the screen to control the functions FN1-9.
  I think I can say it's definatively a driver problem, because if I start the R500, the windows loading screen appears on my screen, but when he switches to the desktop, the external screen turns off and the desktop on the screen of the laptop. Also, no chance to activate via FN + F5.
  I tried with the driver Windows 7 buildin, the latest driver from intel (15.8.3) and the vista driver provided by toshiba (7.14.10.1244), but none of them work: (unlucky
  BTW: the vga output works, but only UNdocked :(
  Does anyone have a solution or a tip what to do or try?

  Hello!

  First of all, I have to say that Windows 7 Beta is as its name the indicates that a beta so there might be some problems and it s not sure that everything works fine with Windows 7 Beta.

  Your problem: you see the second monitor in the display settings? There you can active it and mark the option extend my Windows desktop on this monitor.

  Lastly but not the least you should do an update of the BIOS if you have n t the latest version.

  Good bye

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Portege M400: Port Replicator support DVI and analog monitor

  Hello

  I use my Toshiba M400 in the duplicator.
  The duplicator has two outputs to a DVI and an external analog output display.

  I would use both screens at the same time under Windows Vista RC1.
  The port replicator manual mentions that this should be possible depending on the connected computer.

  "According to the computer connected to the port replicator, you can connect external monitors to DVI port and the port external monitor and display on both screens at the same time."

  Someone he knows the M400 which supports? I only get the external DVI monitor or at work.
  (He used to work with my old others and this function was just great).

  A big thank you in advance.

  Rogier

  Hello

  I'm not sure but pretty sure you cannot connect two external displays at the same time due to the restriction of graphics card for laptop to 100%. You can stretch relative to your office for two screens (one internal and external) or have the same image on laptop LCD and external TFT connected DVI or RGB port.

  If I read the sentence you have posted I realized you can use two ports (according to specifications) and use two screens on the same time screens (laptop screen and an external).

  All available modes to switch the display to the external one, you can check with the combination of keys FN + F5 or in change of display tab tool mobile extension of Toshiba Service.

• Tecra A9 does support DVI-port replicator Express

  Hello

  does the Tecra A9 (PTS52E-01T02NGR) support the DVI-port of the express duplicator?

  The manual (for Tecra A9, Tecra S5, Satellite Pro S200) says this, but the screen is black, if I connect the monitor via DVI port. It works using VGA, but poor quality (interference).

  My colleagues all have the same problem. We use different samsung TFT; the operating system is Win XP Pro.
  The manual also says "..." Maybe some DVI monitors can be used... "but before testing the other monitors, it would be interesting if there is no DVI at all...

  Thanks for your help!
  Daniel

  Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
  The DVI port on the Port Replicator Port Express is * supported only on computers with graphics card ATI or nVidia *.

  If you have a DVI INTEL graphics card port on the on the Port Replicator Port Express is * DO NOT supported *.

  Best regards

• Using DVI instead of VGA on the Port Replicator - Tecra A9

  I have a port replicator toshiba that I use with my laptop Tecra A9, currently I have a vga cable to run the external monitor, but I prefer to use DVI instead, but I can't make it work.

  Is there a setting somewhere that I have to activate? or should it work?

  See you soon

  Ash.

  Hello

  As much as I know there nothing that you must set for the use of the DVI port. The question is how you use it. Using a DVI - VGA adapter?

• Tecra A9 - Express Port Replicator: DVI does not

  I recently bought a Toshiba Express Port Replicator for my laptop Toshiba Tecra A9 PTS52E because I need DVI to connect my external monitor to the laptop Tecra A9 has only a built-in VGA.

  After you connect the laptop to the monitor I get no output on the external monitor, however. Descriptions of Replicator Port Express said that it has a DVI - D, my monitor has a DVI - D and the cable is a cable DVI - D single link so everything * should * work.
  I don't get out Visual at any time, nor in the BIOS (I can't find any options BIOS based DVI as well) or the OS.

  What is the trick to get this working? I have tested the monitor on the other workstations and the VGA out of the docking station works with other monitors as well, but unfortunately not via DVI with that I want to use.

  Hello

  Like many I know the on some series laptop Port Replicator DVI port unusable if the laptop doesn't supports this port!
  For example, the Tecra M1, M2 can use the DVI - D port and Tecra S1 cannot use it!

  Perhaps the with the Tecra A9

• Tecra M10 and Express Port Replicator, no DVI to Toshiba 20 "LCD output

  Hello

  As the bed of the subject line, I will put up a new Tecra M10 with the Express Port Replicator and monitor LCD Toshiba Tekbright 20 ".

  The system works on Windows XP, and the ordinary VGA connection on the port replicator works fine when connected to the external LCD.

  However, there seems to be no way to get the DVI interface on port replicator, working on the LCD.

  I tried to run this utility, and it does not detect the DVI monitor at all.
  http://www.entechtaiwan.com/util/moninfo.shtm

  I have updated graphics drivers Intel for XP, form the Web from Toshiba site and also have the latest version of the BIOS.

  Any ideas?

  Thank you very much
  Paul

  Hello paul

  Your Tecra M10 has DVI port?
  Replicator port is not some sort of converter and it will be just a loop through the signal directly from the laptop.
  If the computer laptop doesn t supports DVI output you cannot expect to get signal from the port replicator.

• Use of DVI port on Port Replicator II with Tecra S11 - 11G

  Hello together,

  I use a Toshiba Tecra S11 - 11G with port replicator.
  I use an external monitor L1950, it is connectetd with VGA cable.

  Now, I want to use the DVI Port of port replicator, but the monitor did not detect the signal.
  Is it possible to use the DVI connection?

  Kind regards

  Michael

  Hello

  Your Tecra A11 does not support DVI port
  The Replicator replicates the ports available for laptop. But if the mobile phone does not support a certain port, then the port replicator is not able to reproduce such interface so I guess that's the reason why DVI ports could not be detected using port replicator.

  PS: did you install the driver provided with USB 2.0 Port Replicator II package

• Tecra A10 with replicator - no output to the DVI port but analog works very well

  Hi all. It's driving me crazy. Brand new Tecra A10 with a nine port replicator and a new external LCD. When I plug them all in all and connect to the screen using the blue/analog/d-sub cable, the image on the screen of the laptop automatically turns on the external screen when the A10 is docked. But when the external display is connected with the white/digital/DVI cable, the Tecra and/or the Replicator is auto-switch the output to the external screen.

  In addition, when you press Fn + F5 to switch the LCD only to LCD + CRT or CRT output only, the Tecra is so "smart" as to "realize" there is no screen, and it switches the output to only the Tecra.

  Now, we would put in place with the blue/analog/d-sub cable, but the picture is wavey and not satisfactory at all.

  Just so we're clear - when the display is plugged into another computer, there is a beautiful clear picture on/through the white/digital/DVI cable, so I don't think it's screen.

  Can anyone help with this please? Is the Replicator defective? Or am I missing something?

  Thank you very much

  As the portable Akuma (graphics card) does not have a DVI output.

  If you use the VGA cable, but image quality should not be worse as with the DVI cable.
  Choose the display resolution higher than the monitor supports and 60 Hz.

• Portege R500 - Slim port Replicator II: dual monitor DVI & RGB all

  Is it possible to use a double configuration monitor on a Port Replicator II slim if I connect a DVI-port monitor and the other to the RGB port?
  I have a laptop Toshiba Portege R500.

  TIA

  Hello

  I didn t find all the information about the Advanced Port Replicator II but I found some info on Advanced Port Replicator III and the simultaneous use of RGB & DVI ports

  So the point is it's possible * ONLY * if portable system unit _itself also includes simultaneous use of RGB & DVI support_.

  concerning

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has