Adding a HP Color laserJet 3600 to a box of Windows 8.1

Similar Questions

• HP Color Laserjet 1600: Driver for HP Color Laserjet 1600 10 Pro 64-bit Windows

  When a driver available for the HP Color Laserjet 1600 for 10 64-bit Windows?  It printed fine with Windows 8.1, but since the updgrade Windows 10 it prints nothing.

  Thank you

  JN

  I answered my own question or find a temporary solution until the official driver is published. After a few successes and failures with different drivers HP Color Laserjet, I downloaded the driver communication USB LaserJet of HP (DOT4) of Windows 8 and higher (64-bit) , located at the link below.  It is listed for the printer HP Color LaserJet 3700 , but it worked for the HP Color Laserjet 1600 as well.  Hope it helps someone.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=315850&swLangOid=8&swEnvOid=4192

  Thank you

  JN

• HP Color Laserjet cp1215 won't install on Windows 7 64 bit drivers

  I downloaded the new drivers from HPs website, installed the new drivers/software, did not work.  uninstalled from Add/Remove of

  rebooted, reinstalled it, no luck.  Let him trying to fix by searching of Windows updates.  Did not find all the drivers.  It says no drivers loaded when you look at the properties in printers and devices.

  Cable USB Windows 7 64 bit, HP Color Laserjet CP1216, is about 6 feet long, USB 2.0, it connects via a docking station.

  The user was eager and since I don't get to this plant every 2 or 3 weeks, I advanced and changed his HP black-and-white laserjet printer.  So I guess this could be considered to be resolved, because I have no longer works on it.

• The Laser HP Color LaserJet 1500 printer is compatible with Windows 7?

  HP Color LaserJet 1500 Laser printer

  Is it possible to install the hp color laserjet 1500 L printer in windows 7 (32 bit).

  According to the website of HP here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02535920 ,

  your printer is not supported in Windows 7 and they recommend the upgrade of your printer (finally they would!). You can try the drivers for previous operating systems, but you're probably out of luck.

• Color Laserjet 3600

  I have cleared a paper jam and in the process removed the black toner cartridge. When I try to reinsert the cartridge, it seems to go all the way to the right but the left does not completely seated and seems to be hitting something. I don't want to force it. Any suggestions?

  I solved this problem on my own. I ordered a Partshere (about $55,00) Service Manual. I've identified the broken part that prevented the cartridge insert on the left side. ($2.84 + shipping costs) I removed the covers appropriate following the steps described in the manual. I replaced the part broken and reconnected in the spring that activates it. All reinstalled. Printer test and 'voila' everything is fine. Part the hardest thing was to identify the part of the exploded in the manual.

  On a scale of 1 to 10, what I call an expensive 8

• problem adding a HP Color Laserjet 3600n on a machine Windows 8.1

  
  

  For some reason, the driver installation program does not do anything in the download folder - at least the folder is empty.

  I did, however, find documentation on a work-around using the Vista driver to

  :http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/topIssuesDisplay/?sp4ts.oid=501044&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03515691-6%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Color LaserJet 3600n's standard paper tray

  We have a Color LaserJet 3600, who had a problem with the standard paper tray being stuck.  Could not get out until we were able to get inside the machine and press the metal plate that makes up the paper when the drawer is in the printer.  After we got him we found a small piece of plastic broken on the end of the right side of the metal plate that sticks through the plastic side of the tray (see picture).  Someone know where I can get this plastic piece without having to buy the whole set?

  In general these tidbits on the bins of paper, like this one, is not available by themselves. We can check the HP parts store to see if the part is available, but probably it will take to get the tray as a single unit.

  I hope this helps.

• using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

  using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

  I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

  Please consider trying this as a possible solution:

  (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

  One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

  After installation, try printing again.

  The output I have indicates it will print is more negative.  Please let me know if you have success.

  One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

• Yosemite and hp printer color laserjet 3600n hp office jet pro 8600

  Hello

  I've updated the maverick at yosemite. The last update for the printer software has been installed (version 3.0 on October 1, 2014). But both printers not working anymore.

  Color laser jet 3600n stops after 10% of printing with the PCL XL, subsystem kernel error, error: data, missing operator: sole source, post 14.

  With the OfficeJet Pro 8600, it is quite similar. The printer starts loadin page. After a few minutes the printer push the empty pages. In both cases the Mac lost the connection to the printer for a while. After a few minutes the connection is established.

  The system is OSX Yosemite 10.10

  Color LaserJet 3600 driver version 2.0.3

  connected to the cable / Hello

  Serial number [personal information deleted]

  number of Procuct Q5987A

  OfficeJet Pro 8600 N911a

  connected without wire/Hello

  FW-version CLP1CN1322CR

  Serial number [personal information deleted]

  driver HP Officejet Pro 8600 2.0 version

  Product CM749A number

  Information device of the HP utility software.

  A response in the German forum was helpful:

  • reset the printing system
  • Reinstall the printer HP (HPPrintDriver3.0.dmg) update
  • restore volume access rights,
  • Restart the system and
  • Reinstall the printers

  After that, the two printers works previous.

• Color Laserjet 3600n does ' t print. Message "looking for printer." New ethernet cable - no improvisation

  Color Laserjet 3600 n does not print. "Looking for printer" message in the printer window. Tried the new ethernet cable-no improvement. Printer turned, restarted the computer and enabled printer back - no differrence.

  Internet works fine. Help, please!

  The software update referenced actually comes from Apple.  If it's not showin your software updates Apple, then you can manually download it here:

  http://support.Apple.com/kb/DL907

• HP Color LaserJet 3600n Laser printer

  AAAI has recently updated computer from XP to Windows 7, now this printer print custom. I tried to download the new driver, but HP 3600n does not appear as a compatible printer, how can I use this printer with Windows 7?

  According to the website of HP support for Color Laserjet 3600 series, you can use the Vista driver.

  Their instructions on how to do this run (click on 'Get software' in the following link for instructions): http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&taskId=135&swEnvOID=4062

  You can get the Vista driver: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=501046&taskId=135&prodTypeId=18972&prodSeriesId=501044&lang=en&cc=us

• HP color laserjet 2605dn printer

  The HP COLOR LASERJET 2605dn PRINTER is compatible with Windows 10?

  HP LaserJet 2605dn printer range is compatible with Windows 10. Check below link for compatibility
  http://www.Microsoft.com/en-in/Windows/compatibility/CompatCenter/ProductDetailsViewer?name=HP%20LaserJet%202605dn%20Laser%20Printer & vendor = HP & local is 1033% 2C3081% 2C4105% 2C16393 & ModelOrVersion is Q7822A & BreadCrumbPath = 2605dn % 20 & LastSearchTerm = 2605dn %2 B & Type = Hardware, & tempOsid = Windows % 2010

  You can download drivers install n the link below:
  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=1140730 & swLangOid = 8 & swEnvOid = 4191

• Printer Laser HP Color LaserJet 3700 will not properly install in Windows 7 32 bit.

  According to the Windows 7 compatibility list the HP Color Laserjet 3700 Laser printer work on Windows 7 using the drivers provided by HP. However, when Windows 7 auto detects the printer and installs it, the device is installed under unspecified devices. If I go into the properties and try to manually install the drivers that Windows tells me that the latest drivers are already installed. I also tried to manually install the printer port LPT1, USB virtual port, with the HP USB port that was created by pilots using universal HP drivers and Vista drivers and none worked.

  Thanks for any help.

  Hello

  have you tried that?

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?cc=us&lang=en&ObjectID=c00751649&prodSeriesId=315849&prodTypeId=18972

• Windows 7 and HP Color LaserJet 3600N

  HP did better still.  No Windows 7 for Color LaserJet 3600n driver!  You can fill in the blanks...   However, using Windows 7 Professional, I could install the XP drivers.   Download software XP and it runs in a virtual XP session.  I then added the printer as Windows 7 would cause you to do.   The add-in has not completed correctly - CTRL/ALT/DELETE.  However, the printer has been added, and it seems to work.   Maybe HP and Microsoft are pushing the broader Windows 7 Professional.

  Hello world

  Download and install the software the complete solution for this printer on the link below.

  Complete software solution for the HP Color LaserJet printer series 3600

  HP LaserJet - support Windows 7

• HP Color LaserJet MFP M177 Pro: No software to install

  Hi all

  I have a laptop of society and the installation of software is not allowed due to insufficient privileges.  For printing I added the driver " HP Color LaserJet Pro MFP M177 series Cffp Driver only (no installer) " I found on

  http://support.HP.com/SK-en/product/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443/DRIV...

  and driver is not "istaller" and printing works very well.

  I need also some "not istaller" driver/software that allows me to use a scanner. Is this possible?

  Thank you

  Peter

  Hi Peter,.

  Contrary to the impression, digitizing require imaging software and the scanner cannot be used without installing any software.

  Must have these permissions to install the software for scanning on the computer.

  To work around the problem, try scanning without using the computer.

  Follow the introduction section printable HP below, then search the HP site connected, if there is any what pads there are instead of digital archiving for your printer as "Scan to E-mail", "Dropbox" or a driver of Google that allow the scan to the cloud on the front of the printer.

  Platelets availability depands of the model of the printer, I have consist some of the above options may be available for your printer.

  Shlomi