Adding nodes to a bridge outside NOR-MAX
I am currently invovled in a project that involves the use several gateways and nodes to monitor temperature, condition of equipment, etc. The system will be implemented by people experienced in LabVIEW, but end users are not. Is there a way to program the LabVIEW software or use other other than the NOT-MAX means by which end users can add a node themselves through the interface developed for them?
Thank you!
Hey, Garrett,.
Without the 9792 or LV 2010, there is no programmatic way to work.
I did go ahead and establish a project that I put together showing how to proceed in 2010 with NOR-WSN 1.2 and a 9792.
Kevin
Tags: NI Products
Similar Questions
-
NOR-MAX noncontinuable exception
Hi all
See the attached screen shot. When I try to change the NOT-Max camera file, I get this "noncontinuable exception." The file in question worked last week, and in fact NEITHER-MAX won't let me change any camera file that should work with this camera. The camera is an evaluation from a supplier of the probe card and the file .icd I'm moving them here - it is currently working with my file .icd updated the. For me, it's the strangest part: the equipment works, everything is speaking to each other, I just can't change the camera files.
I tried to run OR-MAX as administrator, thinking business HE might have eliminated a change of permissions. When I run as administrator and select the new camera file, NOR MAX just goes down, no pop-up window and the file still does not change.
Windows 7; OR MAX 14.5, LV 2014
PCIe-1433 framegrabber
I'll try to save a file in Camera File Generator. I'll post more information, if I learned something.
Thank you!
Crazy
Installation LV2015 has indeed fixed the problem OR MAX. If a part of my previous installation has been corrupted. When I tried to repair the installation earlier today, I had not the installation media going TO practice (or I could have deleted the download like a fool), so I jumped this repair. Now it seems that the problem lies in him GOING somewhere.
See you soon!
Crazy
-
NOR-MAX for VISA DURATION 4.2
Hello
I posted this on the Narcotics Control Instrument, but maybe it's not in the right place since I didn't get all the answers. Here's my question:
I have been looking for more than an hour and have not led to what. Is there a version of the NOT-MAX runtime? I have deployed executables LabVIEW on many other PCs and I encounter a problem on one of them where the resource VISA vi does not return the exact list of the COM ports even as drop-down list of the vi box VISA set up a Serial Port. For example, the list box might show COM1 and COM4 COM10, but VISA resource find vi shows ASRL1::INSTR, ASRL4::INSTR, and ASRL12::INSTR (should be ASRL10::INSTR). So I need a program such as NOR-MAX to change the alias on the PC with the execution of VISA 4.2 engine so that it corresponds to what shows the VISA configure Serial Port vi, incidentially, that matches what is shown in Device Manager.
The PC in question does NOT the LabVIEW development environment installed, so it has NEITHER-MAX. is there a stand-alone exe OR-MAX I can install it on other PCs without the IDE LV? Manual change of visaconf.ini will do the trick? If so, is that what I should remove all aliases, uninstall all external (VCP) ports in the Device Manager, restart the PC (or not) and start again, reconnect the devices?
Thank you for any help or advice.
Ed
James,
Thank you for your response. Yes, I use the Application Builder and no, I chose not install NOR-MAX, but I see there in my file of project under "additional installers. I will consult the installer to run from the Web site of NOR.
After that I posted this question, I have experienced yet. I have manually edited visaconf.ini so that numbers ASRL agreed with Device Manager of / ' Windows port assignment and low and behold, it worked! If this happens on the PC client, installation of MAX would probably be best solultion, however.
Now I'm wondering if the VISA resource find vi is just read this file? I guess that Yes.
Thanks again,
Ed
-
Lost the remote TCP/IP connection through NOR-MAX
"" Hi, I try remotely LeCroy WaveRunner 104Xi oscilloscope through "resources VISA TCP/IP" option in Control Panel OR MAX, but the VISA session is lost (0xBFFF00A6) right after I viWrite the '* IDN?" order several times.
Here's my full configuration process:
1. install the Passport VISA LeCroyVICPPassportInstaller_1.0.8.exe , LeCroy oscilloscope2. setting of the session to follow the instructions (as per joint, LAB_WM827.pdf)
[by the way, I'm not able to configure the session as "VCIP:
'type', I only be able to configure the session asTCPIP0: : 1861:OCKET " ""]
TCP/IP resources VISA-> Create TCP/IP new resource...-> Raw Socket
Set the IP address: 137.57.96.8 (this IP address is successful to be ping by PC and this address is of course belong to the 104Xi WaveRunner oscilloscope)
Set the port number: 18613. then, there will be a new resource under "resources VISA TCP/IP". Select this option and 'VISA Open Session'. A dialog box will be retractable to the communication of the instrument.
4. go to the tab "viSetAttribute", the value VI_ATTR_TCP_KEEPALIVE to VI_TRUE, VI_ATTR_TMO_VALUE the value of 15000.
* NOR-MAX Version: 3.1.1.3004
* Connection: The ethernet cable is used through the server (No 1 to 1 connection) of the company,"After all this, I send '* IDN? \n"(dans l'onglet viWrite ), it returns the value 0 (which means no error occur) and return 6 counts. " So I try to read a buffer (in the viRead tab), but it send me error timeout (VI_ERROR_TMO). After that, I erase the buffer in viClear. Then, I repeat same steps, this time he (viRead) return me connection lost error (VI_ERROR_CONN_LOST).
This situation is repeated every time that I reopen it new session. In the meantime, I also doubt that the viWrite did send the command to the oscilloscope or not. The oscilloscope was no response after that I have send "ASET" (WaveRunner 104Xi order for autosetup oscilloscope) through the viWrite tab.
I am out of ideas now.
What's my configuration OR-MAX problem? or hardware problem? or a server problem?
Please advice... need help badly.
Thanks in advance.
Hi wcsoh,
Alan and LeCroy Support here...
Use the type of connection (LXI). The problem is that when you use the connection TCP/IP (ACIP) type, you cannot configure the WaveRunner 104MXi as a resource of VISA's TCP/IP in MAX. Note that MAX is not 'hip' to recognize any instrument type TCPIP, including extended via ACIP LeCroy. To use LXI, go to utilities > utility configuration... and then to the 'Remote' tab, where you will find the button on the left side of the screen of config to use 'LXI '. If you don't see this button, you will probably need to update your firmware.
With the type of connection (LXI), you can automatically find the scope through MAX, enter this amount as a VISA TCP/IP resource and configure an alias as well... You can also point your web browser to the IP address of the bezel, and you will see a status page with information, including the name VISA always useful resource to use when you configure the scope in MAX. (Note, however, there is no need to use MAX at all when the connections of VISA to LeCroy oscillloscopes!)
Here is a link to an application note written by me which deals with the LXI interface, including information about the configuration of MAX to show scope: http://www.lecroy.com/tm/library/AppNotes/LXI/LXI_Interfacing_AppNote.pdf
Do not hesitate to contact me for any question!
Best regards
Alan Blankman
-
Compatibility of 64-bit of Windows 10 NOR-MAX,
I plan my (forced) migration to Windows 10 this summer for my PXI chassis and noted that NEITHER-MAX 15.0 is not currently compatible with Windows 10, 64-bit (http://www.ni.com/white-paper/52818/en/) operating system. Has anyone heard any news on when / if will produce a compatible NOR-MAX always remember how much time OR took based on the latest versions of Windows?
National Instruments for Microsoft Windows 10 product compatibility
MAX 15.0
It is compatible with Windows 10 64-bit as long as you are using the 32-bit version of the software.
Event take a look at National Instruments for Microsoft Windows product compatibility 8
You will see as very few packets NOR is designed to run natively as a 64-bit software on 64-bit Windows version.
Read also
LabVIEW 64-bit vs 32-Bit Applications FAQ
White paper: the use of products from National Instruments on 32-bit and 64-bit Windows
White paper: National Instruments for Microsoft Windows Vista product compatibility
White paper: National Instruments for Microsoft Windows 7 product compatibility -
NOR-MAX 5: analysis of the instruments?
I am currently developing my GPIB-USB-HS adapter using NOR-MAX version 5. Where is the button "Scan for Instruments' past? All my other systems are on the NOT-MAX 4.4.1.
I was still unable to find it, so I went back to version 4.7.7 (who has the button "Scan for Instruments" in the usual place) and went from there.
-
Attributes in NOR-Max not found in Labview
I'm currently developing a LabView tool (2011) with a camera from Manta G504B Ethernet. It is NOR-compatible IMAQdx but in NOR-MAX attributes are not the same as those found in LabView. I would like as my tool developed to be able to change the exposure and acquire values and lifestyles. However, these attributes do not appear in LabView but appear in NOR-MAX. is it possible to get these attributes in LabView, since these values will change very frequently?
My Manta firmware is 00.01.44.00
NOR-IMAQ is 4.6.1
E/s-OR-IMAQ is 2.5
NOR-IMAQdx 3.8.1
NOR-MAX 5.0.0f1
Answer was found with the example OR grab and Attributes.vi base.
-
NOR-MAX recorded do not channel setting correctly
I'm developing a system using Modules of field Point. I use 7 LabVIEW and NOR-MAX 3.0 to create commands and attributes for the FP-PG-522 module.
To create an attribute of channel using NOR-MAX 3.0, I selects the FP-PG-522 module in the section of remote systems, select the desired channel, select the string attribute, then select Create point.
A new item now appears in the data area. When I select this element, there is a description in the section 'Channels used on this point', which describes the attribute. For example, I chose the market time attribute. For this article, it says "this element represents the 'On Time' of the channels selected attribute. This attribute can be set to any integer between
1 to 65535. "Then, I hit the SAVE button, which shows how to save the IAK file locally, so to save it on the module of ps2000.
If I close OR-MAX 3 and restart, when I select the same new element in the data area, the attribute has changed. It doesn't seem to be any pattern, but I had such combinations as the "control" attributes, instead of the attribute "Generate impulses", etc..
Then I have to delete all these channels and start again, however, data are still once, not saved correctly.
Someone else knows this and knows a way around it?
Chris,
This problem has been identified and the fix will be included in the next version of FieldPoint software.
I just wanted to let you all know.
-
Camera USB/DirectShow is no projection in NOR-MAX
I have a gray Chameleon Point CMLN-13S2M USB 2.0 camera and it does not appear in the NOT-MAX.
I am well aware of Directshow registration with cameras RMP problems and I can tell the camera is correctly recorded. It comes without any problem in AMCAP, a simple viewer of Directshow and also in Skype.
I just uninstalled the drivers PMP and spent some time going through the registry to remove all references that I could, at Point Grey and PMP. Then I reinstalled the 32-bit version of the newer drivers, v2.5 beta 2. I've also upgraded the firmware of the device later.
I am running
LabVIEW 2012 SP1 f2, 12.0.1
Vision development 12.1.0 module
MAX 5.4.0f0
NOR-IMAQ 4.7.2
NOR-IMAQdx 4.1.0
Any ideas? It is a side project and I worked on it market now for over a year and I've learned to get this camera working.
Hello
The way list us the cameras is quite simple using the only mechanism of API Miscrosoft has for him. One thing I noticed, is that we need the "DevicePath" registry key to be filled (in addition to the key "FriendlyName"). Can you check and see if the entrance of advanced camera Grey was who? If this is not the case, try adding a string with a text for her.
Eric
-
Bug in display of the tree when adding nodes dynamically?
I am building a tree dynamically, child nodes are added only after a user clicks to open a node, and a call is made to see if there are children.
The control is very sensitive, but after a few clicks, that it is as if an object of the same color that the background appears in the middle of the control tree obscuring nodes beneath it.
If I click on the empty area at the location where the darkened nodes would fall meet and expand/collapse becoming visible/invisible as they fall under this area or beyond. If I hover over the empty box I see the node highlighting as a strip about 5 pixels wide on the left side.
Revalidation of the tree redraws not this area. Has anyone seen this before, and how can I fix it?The problem disappeared. I think it was a bug is triggered by setting the selected items after I had updated the dataProvider and refreshing the tree.
I had another question where the selectedItems disappeared after update of the tree. I fixed it by setting using callLater() selectedItems, because put immediately after the update the dataProvider of the tree did not work as long as the selection was lost anyway. callLater to do this fixed the issue of the selection and now apparently also the issue with a section of the tree being overshadowed.
-
Hey Gang,
I have developed a driver for the client using a PCI-6601 and DAQmx embedded application. Now that we are in the deployment phase, the customer is shocked by the size of the NOT-MAX. (a rudimentary facility is about 1.5 GB) The only part of MAX that we use is to establish a connection between the PCI PnP and DAQmx resource name.
Has anyone written a utility to PnP without MAX branch?
Thanks for all the ideas,
Roger
Setup for DAQmx is a little big, but really not all that will be installed on the target system. However, I know a problem if you try to spread using a CD. Alternatively, you can ask end users to download on our Web site (www.ni.com.drivers), or you can host it on an internal network if your end-users are internal.
I just ran the installer DAQmx (including MAX) with all selected and checked the cost of disk. It was a little less than 500 MB. Remove everything except kernel driver, MAX and the support of the API (I chose the support of Visual C++ without examples or integration) and it came out to 300 MB. Use the disc button in the installer to see what will be your condition.
-
Hello
I am tring to connect my power supply that is not or via a USB cable, but I am not able to see my connection or the not-max usb symbol.
first time I use it will you please guide me, and is there a driver I need to download for this? Here, I put one attachment regarding this.
Thanks in advance.
-
Wireless Bridge outside of Cisco 1530
Hello
Since the end of the sale of Cisco-1300/1400 wireless bridges, I searched for a replacement product.
I noticed Cisco released the 1530 Outdoor Wireless Access Point. Has anyone used it successfully as a bridge wireless, and nobody knows if theres a utility for calculating range to work remotely approximate the 1530 cover with integrated or external antenna?
See you soon,.
The replacement for the bridges were the exalt r5005 which Cisco sold. This is the real external point bridges up to 160mbps half duplex. You can probably use the old calc or mesh range calc for you give a good estimate.
Sent by Cisco Support technique iPhone App
-
Cannot start the instance after adding nodes to the cluster
Hello world
After you add a third node to my group, I can't start instance. Error:
Additional information:ORA-01078: failure in processing system parameters ORA-01565: error in identifying file '+DATA/gwt/spfilexxxx.ora' ORA-17503: ksfdopn:2 Failed to open file +DATA/gwt/spfilexxxx.ora ORA-01034: ORACLE not available ORA-27123: unable to attach to shared memory segment Linux-x86_64 Error: 13: Permission denied
I use Centos 5.8 and Oracle 11.2.0.3. Thanks in advance[grid@nodedc3 ~]$ crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 7887e29070204f52bfda4091940f4672 (ORCL:VOTE_OCR) [OCR_VOTE] Located 1 voting disk(s). [grid@nodedc3 ~]$ srvctl status asm -a ASM is running on nodedc3,nodedc2,nodedc1 ASM is enabled. [grid@nodedc3 ~]$ ps -ef | grep lsnr | grep -v 'grep' | grep -v 'ocfs' | awk '{print $9}' LISTENER_SCAN2 LISTENER [grid@nodedc3 ~]$ olsnodes -n nodedc1 1 nodedc2 2 nodedc3 3 [grid@nodedc3 ~]$ crs_stat -t -v Name Type R/RA F/FT Target State Host ---------------------------------------------------------------------- ora.DATA.dg ora....up.type 0/5 0/ ONLINE ONLINE nodedc1 ora.FRA.dg ora....up.type 0/5 0/ ONLINE ONLINE nodedc1 ora....ER.lsnr ora....er.type 0/5 0/ ONLINE ONLINE nodedc1 ora....N1.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE nodedc2 ora....N2.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE nodedc3 ora....N3.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE nodedc1 ora....VOTE.dg ora....up.type 0/5 0/ ONLINE ONLINE nodedc1 ora.asm ora.asm.type 0/5 0/ ONLINE ONLINE nodedc1 ora.cvu ora.cvu.type 0/5 0/0 ONLINE ONLINE nodedc1 ora.gsd ora.gsd.type 0/5 0/ OFFLINE OFFLINE ora.gwt.db ora....se.type 0/2 0/1 ONLINE ONLINE nodedc1 ora....network ora....rk.type 0/5 0/ ONLINE ONLINE nodedc1 ora....SM1.asm application 0/5 0/0 ONLINE ONLINE nodedc1 ora....C1.lsnr application 0/5 0/0 ONLINE ONLINE nodedc1 ora....dc1.gsd application 0/5 0/0 OFFLINE OFFLINE ora....dc1.ons application 0/3 0/0 ONLINE ONLINE nodedc1 ora....dc1.vip ora....t1.type 0/0 0/0 ONLINE ONLINE nodedc1 ora....SM2.asm application 0/5 0/0 ONLINE ONLINE nodedc2 ora....C2.lsnr application 0/5 0/0 ONLINE ONLINE nodedc2 ora....dc2.gsd application 0/5 0/0 OFFLINE OFFLINE ora....dc2.ons application 0/3 0/0 ONLINE ONLINE nodedc2 ora....dc2.vip ora....t1.type 0/0 0/0 ONLINE ONLINE nodedc2 ora....SM3.asm application 0/5 0/0 ONLINE ONLINE nodedc3 ora....C3.lsnr application 0/5 0/0 ONLINE ONLINE nodedc3 ora....dc3.gsd application 0/5 0/0 OFFLINE OFFLINE ora....dc3.ons application 0/3 0/0 ONLINE ONLINE nodedc3 ora....dc3.vip ora....t1.type 0/0 0/0 ONLINE ONLINE nodedc3 ora.oc4j ora.oc4j.type 0/1 0/2 ONLINE ONLINE nodedc1 ora.ons ora.ons.type 0/3 0/ ONLINE ONLINE nodedc1 ora.scan1.vip ora....ip.type 0/0 0/0 ONLINE ONLINE nodedc2 ora.scan2.vip ora....ip.type 0/0 0/0 ONLINE ONLINE nodedc3 ora.scan3.vip ora....ip.type 0/0 0/0 ONLINE ONLINE nodedc1 [grid@nodedc3 ~]$ crs_stat -t -v | grep ams [grid@nodedc3 ~]$ crs_stat -t -v | grep asm ora.asm ora.asm.type 0/5 0/ ONLINE ONLINE nodedc1 ora....SM1.asm application 0/5 0/0 ONLINE ONLINE nodedc1 ora....SM2.asm application 0/5 0/0 ONLINE ONLINE nodedc2 ora....SM3.asm application 0/5 0/0 ONLINE ONLINE nodedc3 [grid@nodedc3 ~]$ ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 3068 Available space (kbytes) : 259052 ID : 1523128137 Device/File Name : +OCR_VOTE Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check bypassed due to non-privileged user
Edited by: 922736 2013-05-13 23:51Hello
Sometimes, we are not able to access ASM for creation of database due to permissions on a file ' Gride_Home/bin/oracle' owner should be like this:
-rwsr-s - x 1 grid oinstall 152462728 October 12, 2012 /u01/app/11.2.0/grid/bin/oracle
-
Hi all
We have implemented for oracle 10g rac 10.2.0.5 on windows 2003. A return of the week, one of the node (orcl2) crashed due to a hardware failure and we were able to recover the server and now
a node is broken and the database is running on the other node, that node is also declining
very frequently...
We formatted server failed now can we add this server (formatted) to another
Server cluster. in the affirmative, please let us know how it should be done.You can reuse the same server, but change its name and a FPS so its look as the new server to the CARS.
Here is the guide how to add nodes in Windows:
http://docs.Oracle.com/CD/B19306_01/RAC.102/b14197/adddelwin.htm
Maybe you are looking for
-
Drivers for Panel Fron for Pavilion P6-2112d
HI guys,. I just buy a new desktop PC with WIndows 7 Home Basic is installed. I have a Version of Windows 7 Ultimate 64-bit edition daily. I installed the 64-bit version, but my front panel access no longer works. When I go into the Manager devices,
-
Someone do me a huge favor and build an .exe for me via their app generator? I the student edition and he lets me build applications for a while, but the license has expired and I was a timid version of the finished product! I will attach the icon I
-
I get a disk space warning low all the morning. I went and cleaned the files that came in the box, but still having a problem. At least I have start deleting programs I use, I don't see where to get more 'space '. Thank you in advance. ~ mtntown PS a
-
Level of BRIGHTNESS for HP laptop 15
Same problem for me after installation of windows 10 to much light on the screen.
-
Error in communication on V715w
Recently I get a Communication error message: What seems strange to me is that I get this with the green light of Wi - Fi, and I can ping the printer and get an immediate response, so I know that the printer and the computer are in communication. Wha