Adjustment layer is a white solid

Similar Questions

• Can't paint white on a black adjustment layer (black and white works great) in items 13-version PC on Windows 7 64 bit

  It worked well in 11 elements. In version 13, this no longer works. Removed as a smart object?

  If re-defining the PEF makes no difference, try a reset tool. Click in the tool palette and select your brush tool, then go to the Options in the tool bar at the bottom of the workspace. Click the dropdown to the right (see image below) and choose Reset tool.

  

• new solid vs new adjustment layer and turn on icon Wo

  Hi all

  It is safe to say that an adjustment layer is just a solid layer called adjustment layer with the black and white adjustment icon enabled and that a solid framework that is the size of the model and default color white.

  Thank you

  Which is close. No matter which layer can be transformed into an adjustment layer, not just one solid color layer. When you create a new adjustment layer with layer > New > layer control setting, it creates a layer of ordinary white solid color that you describe, and then turn on the switch of the adjustment layer for this layer.

• Small white dots on the adjustment layer.

  Starting from 23/11/2015, I had a problem using the curves adjustment layer.  When I invert the layer and then use a brush to paint where I want the layer to show, it gives me little white dots everywhere.  Does anyone else have this problem.

  I had a problem like this in the past, but it was encircling as a selection.  Now these are the points.

  

  Sorry, I forgot the screenshot indicates that you are working in 16-bit.

  In any case, the Brush tool is on the blending Mode "dissolve".

• using adjustment layer mask not paint it white to reveal the adjustment

  I added the adjustment layer for the image, changed to black with the white foreground color I am unable to reveal the adjustment

  

  Should not be a problem. Check your brush Blend Mode in the Options bar

• Crossfade of the white frame to the adjustment layer doesn't work more in 2014 CC

  Windows 7, first Pro CC 2014

  I have a video clip in a sequence, nested on a layer of setting on the V2 and V1.

  I want to dissolve a white frame on the clip using the adjustment layer.

  In CC PP (not 2014), it was simple:

  Beginning with a white PNG on V2, melted chained to the adjustment layer.

  However, in PP CC 2014, this causes a fade to BLACK for the duration to dissolve, then a CUT to video.

  This behavior in 2014 CC is illogical. Why has it changed?

  There are other ways to do this, but it was quick and easy and is required for hundreds of clips in existing scripts / projects.

  Support by live chat response:

  Thank you for your patience

  the adjustment is layer does not work properly

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform & loc = in

  Fill in the application form for feature/bug

  No Yes No problem.

  Turn off GPU and see if that makes a difference.

• Stay in white adjustment layer and does not apply its effects to the video overlay?

  Stay in white adjustment layer and does not apply its effects to the video overlay?

  I used color correction adjustment layers and now my adjustment layer is just stay white and I watched so many forums and I can't find what I'm doing wrong...

  I have reset my preferences, I did a new project that I am naïve.

  

  It's After Effects but... Try opening the composition window (TAB)

  You are looking at the AL in the film window.

• black and white adjustment layer does not

  Hello world. I know this is going to sound really stupid, but I'm looking to change a logo of color in bw. I wanted to use the black and white adjustment layer, but the option is grayed out. Y at - there a step I'm missing? The file is CMYK and 8-bit. I use PS CS6. What should I do to make this option available?

  Your document must be RGB rather than CMYK.

• Transparent gradient adjustment layer

  I would like to create an adjustment layer (so I can tweak easily later) which creates the exact same effect as a tool of gradient in the following example.  I for the life of me can not understand how to do, maybe it is just not possible...

  Using the tool gradient to create a mask, I can easily achieve this (note the gradient fades the image but maintains a transparent background):

  Using a gradient adjustment layer I am forced to choose a color (transparent white) and I get this:

  

  I want than the previous (bland transparent) so I can easily fall on any background color later, but I want later so that I can easily adjust the % of fade eventually.

  Is there a way to make a gradient in transparent fade adjustment layer?  I thought that it would accomplish may be a combination of the mixing layer, but have not been able to understand.  I try to keep things simple, but it's ok if the solution is a bit complicated because I intend to automate it in action that will apply to dozens, maybe hundreds of images.

  There is a way without resorting to dynamic objects.

  

  There is between these two layers clipping mask. This goal is achievable by alt clicking on between the two layers, or the shortcut Alt G command. Transparency would then become dynamic to some opacity is set for the gradient. Its solid to transparent gradient

• "Adobe Photoshop cc has stopped working" when I click on an adjustment layer

  I get this message "Adobe Photoshop CC has stopped working".

  I've done everything there is on the help site. Still no luck. Here's what happens:

  Photoshop opens and I can work with it. It seems that almost all functions work perfectly, HOWEVER... When I try to access an adjustment layer, say the levels, then Photoshop will stop. Strangely, if I select the black & white adjustment layer, it WORKS? The OTHERS don't.

  I also had on the Adobe help forum and can't help and say it could be a flaw in Windows

  My system:

  Windows 7 Service pack 1

  740 NVIDIA graphics card

  Avast security

  Here are the error codes I got from the event viewer

  The failing application name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  The failed module name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  Exception code: 0xc0000005

  Offset: 0x000000000613ac34

  ID of the process failed: 0xa2c

  Start time of application vulnerabilities: 0x01d1528f0f0ee895

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Report ID: 77c9266d-bebc-11e5-98ce-d43d7ebe3e53

  The failing application name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  The failed module name: Photoshop.exe, version: 16.1.1.327, time stamp: 0x5667fb90

  Exception code: 0xc000041d

  Offset: 0x000000000613ac34

  ID of the process failed: 0xa2c

  Start time of application vulnerabilities: 0x01d1528f0f0ee895

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Report ID: 7943d034-bebc-11e5-98ce-d43d7ebe3e53

  The modules work perfectly in Safe Mode BUT not when I do a clean reboot.

  I also did the following:

  Creates a new user

  Run FIXIT

  SFC/SCANNOW

  Uninstalled and re installed Photoshop CC

  Uninstalled and re installed Driver Nvidia

  Restored to the old NVIDIA driver

  Uninstalled all drivers (Wacom tablet & external HD)

  There were also times that I could not get into the event viewer (this message appeared "Microsoft Management Console has stopped working")

  Let me know if you need more details.

  Cheers, Craig

  Hi Craig,.

  Please provide a detailed account of your question. You, the efforts are very much appreciated!

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  a. you did any important changes made to the computer just before the problem occurred?

  b. what fixit did you run, when you say "Run FIXIT"?

  You have tried most of the linear troubleshooting, it can be concluded that the question could arise also following a conflict of third-party software that impede the performance of Adobe Photoshop CC. To diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  It is possible that the application has not been uninstalled properly and have hampered after the new installation. I suggest to try to start the next fixit and then try to install the program Photoshop CC.

  The problems that the programs cannot be installed or uninstalled

  If the problem persists, try the following method.

  Method 2:

  The question could also arise due to a conflict of third-party software, so, I would be as you suggest clean boot of the system once and then try to install the program in a boot environment.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  If the problem does not occur in the boot, you can determine which applications and services on the computer is causing this issue.

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Paint over the video after the addition of adjustment layer?

  Hi all

  I have a little video, 30 seconds, and I try to draw the frame by frame on top of the video with a brush. While it's easy I would first change the black and white video. By adding a black and white adjustment layer, it does not allow with a brush. I was wondering if there was another way to select all the images in the video and change it to black and white while helping paint me over it frame by frame.

  Thank you

  I struggled to learn by trial and error, so my workflow is questionable, but I'll try and at least help you get started.  My screenshot is too big for the page, then click to expand to see comfortably.

  So I started with a group of video with the Lady driving a cow.  This is the video Group 1.  With the video layer selected in the layers panel, I add a B & W adjustment panel and my video becomes black and white.

  To add an animation on top of that, I have to make a new video group using the small movie icon at the left end of the Timeline.

  For me, I see the second group of video, and so I have to drag the timeline at the bottom of the page and make more great by dragging its lower edge.

  You need something to draw, so with the video Group 2 twirl open, add a layer. It will be too long, but don't worry at this stage.

  Make your drawing on this layer.  If you want that the animation to change two images, move forward two frames of the time indicator and use the scissors to cut the video group at that time.

  You will need to market the onion skins (steal our in the upper right corner of the scenario)

  You will now be able to see a ghost of the last image to use as a guide to draw on the other.

  Note: every time you cut the track, it will create a new layer draw.  By clicking on an item in the Assembly will select this layer.

  Therefore, my axe up to attempt using video editing for animation.  Until very recently I agreeing me with those who cannot not work why onion skins isn't available only for video and image animations.  It was an ordinary user error!   I'm sure that you'll be able to Polish my clumsy workflow, and I'd appreciate a heads up if you do.

  Good luck and patience.  Lots and lots of patience.

  

• CS4 Crash in the BW adjustment layer

  I use the black and white adjustment layer in CS4. After the conversion to black and white, I select the "cursor" tool/eye drops to be used directly on the image (sorry, I don't know the official name). As soon as I do that, the PS crashes. I can manually adjust the sliders; Sometimes it affects the image, sometimes not.

  Any ideas? Preferences of the trash?

  Thank you

  Debbie

  P.S., Macbook Pro, 10.8, suite CS4 Design.

  Hi Debbies,

  I suggest you to reset the Photoshop preferences as you mentioned that to adjust manually the sliders sometimes will not work.

  Using Photoshop | Preferences

  Please let us know if it helps.

  Concerning

  Sarika

• Need to create and adjustment layer to compensate for the unwanted hue caused by lens

  I'm looking for help to set up an adjustment layer to compensate for a specific lens coloring problem. Basically, I use a GoPro (on a drone) but I got a flat lens of spare parts. The sharpness is good, but the lens has a well-known problem: it translates into a pink coloring around the edges/corners. Most of the time it is barely perceptible, sometimes he jumps. It also depends on the screen, that I use for example. My TV seems to bring out a lot more than my laptop.

  Here's an example - look at around 0:35 0:40 http://vimeo.com/117790732

  And to try to get an idea where the question is on the frame, I took a picture of the example of the grass Frost, very early in the morning. I then crank up the saturation to 100% and this is what it looks like:

  

  I would like to be able to compensate for this. This should probably do with an adjustment in Photoshop layer that I can then import in Premier Pro. Can anyone advise as to how to do?

  Any help will be appreciated.

  Thank you

  Jacques

  

  Since any change in RGB channels influence the tonal scale, perhaps to the laboratory, with m/g-b/y juxtaposition and distinct tone level would be a logical choice. Here, a few sweeping curves (and a rough mask, sorry about that) need to be addressed.

  

  The adjustment layer that results can be changed in the opacity according to the saturation of the chromatic aberration.

  EDIT: Posted quickly. End of shadow of channel tweak L. red dot needs a white dot in the mask to eliminate].

• adjustment layer curves not affecting does not image

  Hi, I have a photoshop image strangely uncooperative. I put a curve on adjustment layer to increase the contrast [file monolayer] and has no effect. What could happen?

  If you want to see it, the file in question is here: http://x.co/67Ae8

  Thank you. [2.5 GHz, 10.6.8 imac. [ btw, version of photoshop is CS6.]

  Well Yes, looks like no change for me.  Rbin was right, and he would do because if it's just different layers opacity to black that the curves would not affect him.  Just stick a white fill on the background layer.  The curves layer will adjust the combination of the two layers, which gives him the gray to work with.   Seems to work fine for me now.

• CMYK mode good B & W adjustment layer

  Hello

  The black and white adjustment layer is not available in CMYK mode? If so, what is the reason for this? I did find the restrictions mentioned in this topic using Adobe.

  Using Photoshop | Convert a color picture black and white

  In my case, it is grayed out in CMYK mode. But if I change the RGB modes, it is available.

  This is for CS4. Thank you.

  Some filters require images in RGB. Some require 8-bit images.  That's how they are programmed.

  It's just the way it is.  Live with it.

  The obvious solution is to convert some RGB space before applying the filters you need.

  CS4 is obsolete and is no longer supported by Adobe in any case.