My apple ID seemed missing or deleted after being unused for awhile

Similar Questions

• HP Officejet 4620: Network printer shows unable to communicate after being unused for 4 hours.

  Printer prints as it should after being turned on.  After being unused for about 4 hours but always enabled, when ordered to print the printer does not print and the computer displays the error "unable to communicate with printer."  However, if the printer is then turned off and then turned back on, it prints without error.

  There are a few possible solutions.

  1. Firstly - check if your firmware is up to date. (Firmware update instructions)

  2. make sure that your point of Wi - Fi networks firmware is up-to-date.

  ? -Is this wireless light (little blue light by the wireless button) stay on all four hours?

• After the upgrade from Office 2007 to Ofice 2010 on my Vista, then my computer turns off after being idle for a while.

  After upgrade Office 2007 to Office 2010 on my Vista, then my computer turns off after being idle for a while. When I turn on my computer, I get the splash screen indicating that Windows has finished unexpectedly and I would like to start in safe mode or normally (pluss a couple more choice...).

  Appears not to occur if there is activity going on--as if do me some work or have itunes playing music or I'm just surfing the internet. Curiously, it seems not to happen if I close Internet Explorer and Outlook.

  I shot all automatic updates for Windows Vista (32 bit) and Microsoft Office.

  Concerning

  B Odd Andersen

  Hi B Odd Andersen,

  I want to clarify if your computer seems to be sleeping or it completely closed after being idle for a while.

  Method 1: If the computer is in power saving mode, check if you can wake the computer from this State by moving the mouse or pressing any key on the keyboard.

  Method 2: Change the power to another and check to see if the problem persists
  Change, create, or delete a power plan (scheme)

  Method 3: check the logs in event viewer for more information on auto-off down

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Note: For your safety and security, it is not recommended to disable Windows Update.
  Activate the update or disable automatic

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista will not open apps or to stop after being used for a short period (semi freezes)

  When I start the computer, everything loads normally and works very well for a while, usually an hour or two. But after being in use or left alone, I'm more able to open applications, including Notepad, Microsoft Excel, Firefox or even windows Explorer Windows. In addition, the stop menu will not be displayed. I can open the start menu, but nothing else inside, so I have to do a cold reboot every time.

  Excel is the only program that gave me any kind of error message, but it says there is not enough memory to run.

  I am running vista Home premium 32-bit with 4 GB of RAM.

  I also made sure to update all my drivers, most of my programs and even to reinstall service pack 2, but the problem persists.

  You've done a repair system/upgrade and the problem persists?  If this is the case, I sincerely doubt a clean install will do better (but he can and may be worth a try if it comes to that).  I'm now tempted to think of material.  We will check your hard drive and RAM:

  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  You can also test your RAM to http://www.memtest.org/.  If it fails, test each piece individually to find those who are bad and replace.  If it passes, the RAM is probably OK.

  Is the computer that runs particularly hot - y at - it part of it which causes the pain from too much heat so that you have to pull your hand?  The fan blows and he is blocked in any way (perhaps by a piece of paper or lint or something)?  You may need to open the case to check for this (unless it's a laptop, then just check to see if the fan is working and you can feel air blowing from the vent.

  After that, it of time for the computer repair technician to check the system hardware (NOT Geek Squad or one of these centers of department store, but a true professional) - but try following this section first to see if this is useful (and maybe try a pure install as a last resort).  The problem (if it exists) can be any number of things that you can't check yourself without special equipment spare parts (the motherboard, processor, power supply,...). Check around to find someone reputable.  Alternatively, you can return it for repair to the manufacturer (they have all the spare parts that may be required).  Find out the costs and quality of options and guarantees with the repairs and then to make your best choice.  Don't forget to backup your important data before send you it or bring it in - there is a pretty good chance that they will do something that will ask you to do a clean install even if it is probably not really necessary (but they are more interested in fixing the problem than the preservation of your data, programs and settings).  If you have a version of Vista that is capable of a complelte image backup that would be the best choice – you could just restore when they return from the machine and you will be right back where you were.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------

  If they test OK, then let's see what you have running on your system at startup.  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and download and install Autoruns (which is a FAR superior to Vista msconfig program) and see what to load at startup.  I bet there are a lot of things, you really don't need but installed by the manufacturer when you installed programs (sometimes just so they will begin more quickly when / if requested).  Some are inportant as Windows Defender and your software AV - but I bet that most of them aren't and they use valuable resources running in the background without valid reason.  When I checked my own system I ended up remove about 90% of the items in the start menu - and the system showed an improvement notice in reactivity.  Don't worry, you can always start almost all of the programs in the menu all programs (or you can add controls to the items or create new programs that you actually launched at startup with Autoruns.

  The advice that Michael Murphy gave you already should have cleaned most of all what could be slowing down your system - and the repair/upgrade system took care of all the corruption in files on your system. I'm honestly not Kow nothing else to try (with the exception of the material option described above).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Adobe Camera Raw is will be deleted after 9.0 for CS6 and CC (v14)?

  I heard that somewhere. Is that all know? A link or a reference is preferable.

  Gene

  Adobe has made no announcement on this subject and it is unlikely that they will be. What you "heard" is simply speculation at best and sow the rumor at worst. Personally, I suspect that ACR will continue to work in the CS6 for as long as Adobe still sells CS6. And, no, there is no announcement of Adobe...

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

• Computer freezes constantly after being inactive for some time (windows vista, 32-bit)

  After 5-10 minutes of inactivity, the PC crashes, not alt + f4, not ctrl + alt + delete and no more choice, JUST! He can turn off my laptop! I'm going to be psychotic...

  The problem occurs in safe mode?

  Method 1 : put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2: clean boot

  If the problem is not repeated in safe mode then it is likely that a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My new Windows 7/64 bit computer Dell freezes after being idle for 20-30 minutes

  Some basic information:
  (a) my laptop is brand new, I bought it less than a month ago and I started experiencing this problem in the beginning, very annoying.
  (b) my laptop freezes after inactivity for 20-30 minutes, I have to remove the power cable and reconnect it to restart the computer
  (c) the freezing happens daily when I have access to the Internet with Internet Explorer or Google Chrome, no difference between these two.
  (d) I have Windows 7 Home Premimum with the latest updates.
  (e) I get no error message when the computer freezes, it freezes only when idle, as when I leave my computer for 20-30 minutes
  (f) I ran the disk check, I did the clean boot and I have configured the power setting, but the problem persists.

  Can someone help me? I searched this problem on the Internet and it seems to be a common problem with Windows 7. I've never had such problems with my previous computers with Windows XP and Windows Vista.

  This isn't a common problem.

  Do you have what programs or utilities maintenance installed?

  This external devices you have connected?

  Using Dell DataSafe? If not, uninstall

  Do you wrong used windows update to install the recommended updates, as apposed to important updates?

• After being opened for a while (with several tabs) Firefox does generally and repeatedly play a sound - video will play again, but not sound.

  This problem started happening only recently. I often keep my Firefox open all night with sites like rainymood.com or grooveshark.com playing, as well as several other tabs, including but not limited to Facebook, YouTube, and Reddit. Sometimes, after a few hours/days to not restart Firefox or my computer, Firefox starts to become insensitive - i.e., pages take a long time to load, opening new tabs is difficult for the browser and videos will have up to 30 seconds to start playing. In addition, the sound stops playing. If I start a YouTube video, after the initial period of excessive load, the video will play, but without any audio. Also, sites such as rainymood.com and grooveshark, even Facebook, stop sound.

  Note that this is different from an incident of flash plugin - when flash falls down, the audio and video become inaccessible and a simple refresh or restart of Firefox will solve the problem. But what is happening here is different; If I refresh the tab, nothing changes, and even if I restart Firefox, it opens the same way again until I restart my computer completely.

  Also of note: I had, in the past, this same thing happens, but rainymood.com continued to play, however no other tabs would make sound. The problem is sporadic and I don't know where to start. Also, sometimes it's only a problem of Firefox specific, which means other programs on my computer can make sounds, but sometimes this problem makes my computer all stop making sounds, with the exception of Ventrilo, which works, but is also insensitive in the beginning.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• In Windows 7, crashes after being idle for a few minutes

  COMP. CAME WITH VISTA HOME PRO. HDD OUT CRAPPED.  REPLACE HARD DRIVE WITH PROGRAM T1 & ADV. WITH WINDOWS 7.  INSTALATION WENT WELL. BUT COMP. A LOCKED UP AFTER SITTING A FEW MINUTES PRESENCE REPAIRS.

  Please have a read of this page - resume idle freezes. May have tips on there for you.

  Above all, make sure you have the latest OS updates as there have been updates of stability.

• Windows 7 says that's not true, after being installed for some time. Does system restore or recovery.

  I installed Windows 7 Home Premium 64-bit for system integrators that I purchased from newegg. It has been installed since April / May and worked fine until now. I've tried some other solutions to this problem, and none of them seemed to work for me. Here are the diagnostic information.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc0000022
  Windows product key: *-* - 2V8MX - 6W6FY-QV9G3
  Windows product key hash: 7OKQvU3zqMLEBwJbyNvbLLvP9E = +
  Windows product ID: 00359-OEM-8702173-90703
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {2726D545-3F1A-4942-8A34-5F2FE1E20DAC} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.100618 - 1621
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {2726D545-3F1A-4942-8A34-5F2FE1E20DAC}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-QV9G33S-1-5-21-57199979-1290623787-413427169the system manufacturer,System Product NameAmerican Megatrends Inc. 00359-OEM-8702173-90703 0901 20100208000000.000000 + 0009FBA3607018400FA04090409Eastern Standard Time(GMT-05:00)03103103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6586414 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
  Error: 0x80070426

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: OAAAAAIABgABAAEAAAABAAAAAgABAAEA6GEWutKcVIAGnlwaRpDEtVTyEDNWG6x3zu52JZJjQOk =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1147 APIC 020810
  FACP 020810 FACP1147
  HPET 020810 OEMHPET
  MCFG 020810 OEMMCFG
  020810 OEMB1147 LASRYVITRAGE
  SSDT A M I POWERNOW

  OK, I reinstalled Windows 7 and that fixed my problem. Thanks for your help.

• BlackBerry Smartphones Re get a signal after being away for a long period of time!

  Hi all

  New to the forum, so I would like to join the thinking and see if someone can help with a small problem I have.

  I work in the middle of nowhere quite often, where the telephone signal is very low or non-existent. (I'm with Orange BTW).

  The problem seems to be that when I was out of range of the signal for a while, (the shortest period up to present about 30 minutes), and I'll be back in range, my BB doesn't automatically drop the signal.

  The only way I know to regain the signal is off the phone (red button does not restart the battery!) and again on.

  The phone then searches the signal and everything returns to normal... that is until I left out of reach!

  Y at - it a shortcut to re capture the mobile signal rather than extinguished/turned on?

  Thanks in advance

  M.

  Usually, you can simply go to manage connections > Mobile network and turn off, pause and turn back on your mobile connection to find your network.

• After being off for ten days, MBP is going very slowly

  Hi all

  During the festive period, that I have done any work on computer and since then it is very slow and jerky when I opened a window, for example, get a black screen where the new window opens for a brief second.

  I also see the wheel that rotates a lot.

  I have the battery it also says replacement needs but its says that since about 2 years but I'm on 700 cycles.

  It is a MCP 13 "mid 2010, 8 GB RAM and 1 TB SSD.

  What do you make of all that?

  Stelios

  stylianous wrote:

  Hi all

  During the festive period, that I have done any work on computer and since then it is very slow and jerky when I opened a window, for example, get a black screen where the new window opens for a brief second.

  I also see the wheel that rotates a lot.

  I have the battery it also says replacement needs but its says that since about 2 years but I'm on 700 cycles.

  It is a MCP 13 "mid 2010, 8 GB RAM and 1 TB SSD.

  What do you make of all that?

  Stelios

  It may be that really need the new battery - or the battery that keeps the date and time.

• Sony Xperia z3 Turned off and will not charge after being immersed for about 5 minutes

  As the subject says. My Xperia Z3 was submerged for about 5 minutes in less than a foot of water. He was in charge at first, then it started to vibrate. The model will thus: 1 (typical to indicate the load power) Vibration, then a Triple vibrator. At this point the LED on the phone turns off. Now he's going to restart this process again and again until the phone is disconnected. That submerged while the phone components were closed and did not open. As far as the damage is concerned, it is a crack in the root of the hair in the backglass and part of the bezel has started to peel off near the camera for unknown reasons. Once again this damage is very slight, and only someone who knows what the phone looks like new would see same. Any help would be apperciated.

  I'm sorry to see it, but you will need to contact your local care Xperia

  http://support.sonymobile.com/global-en/contactus/

  Request a trial of vacuum.

  The crack may be the cause of the water damage.

• My HP HDX 18 1200 has a cooling fan make noise at startup after being off for the night.

  I don't have any document that shows how to open the unit and change the fan.  If the folder is available please either post the pdf or send them to me please.

  Can I change the fan, that I built PC for 20 years.

  Hello

  You can try to look at this document.  It's maintenance and repair for the HDX 18 series, it is not listed under manuals for your model, so it is perhaps not entirely accurate, but it should be close, since this one is listed for earlier versions of the HDX 18 series.

  R