After RAM upgrade kernel panic

Similar Questions

• Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

  I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

  Thank you

  > I would like to know whether to extend the warranty for laptop RAM is maintained.
  RAM upgrade does NOT affect the warranty.

  Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
  [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

• PSC0LA Satellie C660: After RAM upgrade only slightly increased memory

  Toshiba Satellite C660 Notebook PSC0LA - 01C01H (32-bit; RAM maximum 4 GB [2x2gb]), Windows 7 SP1

  When bought this laptop has 2 GB of RAM and memory of 1.67 GB. After that I recently doubled the RAM to 4 GB (maximum possible), available memory has increased to 2.84 GB.

  I know that little RAM is reserved for the process of the system, video memory, kernel, etc., but this is really pissing me. I was expecting at least 3.34 GB available memory (double that previously available) in the assumption that only 0.33 GB would remain necessary to the process, videos, etc.

  Why has this happened? Can we do anything to get the memory, as this modest increase in performance is barely perceptible?

  Kind regards
  Hedley

  32-bit system (no matter if its Windows or Linux or another system) supports and recognizes 3.2 GB RAM max

  If you want to use more than 3 GB of RAM, you must switch to the 64-bit system.

  Welcome them

• Satellite A50-109: after RAM upgrade-> blue screen

  Hi all

  I bought a new patriot 1 GB ram sodimm pc 2700 as an upgrade to my satellite a50-109. After installation of the equipment on the back of the laptop, I had some problems with windows xp bsod (blue screen of death). Errors 0x000000e8. After recording with microsoft, I had to reinstall the drivers... Can someone help me please!

  Thank you
  Alex

  It seems that you are using a module of memory without a name. These modules can malfunction. It s nothing unusual.
  So I use and always buy modules memory Kingston or Infineon brand, for example.
  I have goggled autour and actually ntfs.sys error might have something to do with the fault memory.
  It s whatever the module has been properly recognized in the BIOS. Certain areas of memory may malfunction

  In my opinion, you should check if the laptop will be functions correctly with the modules of memory recommended by Toshiba

• Windows 7 Home Premium OEM upgrade does not not after RAM upgraded FRO 1 GB to 4 GB

  New installation Windows 7 Home Premium 64 bit OEM worked the 1st time on workstation Dell Precision 380 (Pentium 4, 3.0GH, 1 GB RAM, Windows XP), so I registered with Microsoft.  PC worked too slowly, so I upgraded the RAM from 1 GB to 4 GB.  PC will not start now.  Nothing on the website of dell, or the PC manual led me to believe that there could be a problem.

  After I had already performed several tests, PC manufacturer said to install Windows 7 AFTER upgrading the RAM.  However, as the installation before the upgrade of RAM and joined already, can I now reinstall the OS without affecting the OEM license.

  You can reinstall Windows OEM on the same computer. Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  If you have trouble activating Windows 7 you can call Microsoft to activate it by following these steps:
  1. with the operation of Windows, click Start, then in the search box type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4. Select the telephone activation option, then dial the given number and hold for a real person.

  For more details: http://www.sevenforums.com/tutorials/18715-activate-windows-7-phone.html

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Satellite L10-119 freezes after RAM upgrade

  My Satellite L10 is 4 years old. I wanted to update this change of RAM and HARD disk.
  I installed in RAM DDR1 SoDimm 1 GB PC-3200 (a unit) and used my computer for a few hours.

  But next time, he started to make mistakes and freeze or stop going to the blue screen.
  When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK.

  Will not track with * 1 Gb PC - 3200 * to use?

  Hello

  Case is clear!
  > When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK
  You used the not entirely compatible RAM modules!
  This is the reason why your laptop freezes!

  The fact is that your L10 can be upgraded to 1 GB RAM max, this means you need to use max 512 MB RAM module in a slot

  In addition, you can use the PC2700 200 pins (333 Mhz) DDR SODIMM modules and not of PC3200

• Satellite M115-S3094 freezes after RAM upgrade

  Hello

  I just added Corsair - 2 x 2 GB 200 PIN SODIMM DDR2 667 mhz memory to my laptop Satellite M115-S3094.

  Earlier I had 512 MB included with the laptop. The problem is that sometimes the computer starts and freeezes, none of the buttons work and I have to hold the button for 10 seconds to turn off and restart the computer. Sometimes I restart 2-3 times until it works.

  If there is any problem after commissioning, then I find myself using the laptop for hours like now and I won't have any problem until I restart.
  This all started when I upgrded memory. I tried to re install and it did not help.

  I would appreciate any help from anyone who has faced such a problem. I also have windows xp home edition.

  On the casablenca system, it shows 4 GB but used is only 2 GB. I even deleted one of the sticks, but I still have the same problem.

  Hello

  I think that the problem is without a doubt for new modules of memory installed
  Maybe the modules aren't 100% compatible or failed modules

  I guess the laptop ran correctly with the old module of RAM.
  This would confirm my hypothesis and I think you should test the specifications with the other s RAM

  Good bye

• After RAM upgrade disk HARD is not visible on Satellite A660 - 11M

  I have the Toshiba Satellite A660 - 11M.

  When I upgrade the RAM to 2 GB 2 Six gaeremynck Bios can't see the drive on Start menu please help

  And when you use original RAM modules only disk HARD visible again?

• After RAM upgrade Satellite P100-222 is on but nothing comes on the screen

  Hi all
  could you please help me?

  I have to update my 2x512Mb in 2x2gb RAM modules.
  If a module (2 GB) installed - it's ok.
  If two modules (2 gb + 512 mb) installed, total RAM 2.5 - it's ok
  But if two modules (2 gb + 2 gb) it does not work :(
  When I turn on my laptop the lights come on as usual and I can enter the BIOS but after installation of the screen nothing cam upward on.

  RAM SO-DIMM 2 x 2 DDR2 SDRAM Kingston "ValueRAM' KVR800D2S5K2 modules / 4G (PC6400, 800, CL5)

  Hello

  These things happen usually when you try to use memory modules live not compatible.
  I checked the page of Kingston and Toshiba and modules of 2 GB compatible for your laptop modes are:

  PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or
  Kingston KTT533D2 / 2G 2GB 533 MHz Module

  Good bye

• Could not load the BIOS after RAM upgrade - Satellite A200

  Hello

  I've updated my RAM memory on my laptop Thishiba Satellite A200 (from 2 GB to 4 GB) but unfortunately now I can't enter the BIOS. Automatically load the operating system (windows 7 64 bit).

  How can I solve my problem?

  P.S. The new RAM works perfectly and it is recognized by Windows 7.

  Post edited by: bennito

  I don't know what you've done and why this happens, but what you can do is to check if the quick start option is enabled.
  Open Toshiba Assist > optimize > HWSetup > priority Boot and check the startup speed option it.
  Remember that it is set to Normal.

  Please, check and send comments.

• After RAM upgrade on stick Satellite L30 - 10V single RAM is recognized

  I just added a stick of Ram 1 GB Crucial in the L30-10 (PSL33E), but only the recognized 1 GB, the Hyundai stick (512 MB), which shipped with the laptop is no longer used by the system.

  I tried to pass it around, but I can only get 1 stick of RAM to work at the time, is 1 GB, when the two Rams are placed in slots or if only the 1 GB is installed or 512 MB when I leave the 1 GB.
  Do you have someone at - he managed to get 2 stick operating simultaneously, on this system?

  BTW, CPU - z recognize the two sticks and reports correctly 1536 MB, the BIOS but only 1 GB, in fact less, since some plans to unlock the graphics card.

  The version of the BIOS on my system is V2.80, dated 05/03/2007 and the two memory are the same speed PC2-4200.

  Hey Abe you're really cool. Sending all these links other forum users can see a lot of different themes is discussed before and using the option to search or the knowledge base of Toshiba, they can find a lot of useful info.

  Toshiba knowledge base can be found under http://eu.computers.toshiba-europe.com > support & downloads > support home > troubleshooting Knowledge Base

• HP ProBook s 4540: 14.04.3 of Ubuntu LTS works very slowly after ram upgrade on HP ProBook s 4540

  Hello, I changed the default 4 GB aData RAM sticks 8Gbx2 stick.

  No, it takes forever to start and open any aplication including terminal.

  Do you have a Linux swap partition? With 16 GB of RAM you should not have it. You also have an SSD?

  https://sites.Google.com/site/easylinuxtipsproject/speed#TOC-the-absolute-number-one: - decrease - swap - use

• After RAM upgrade my A60 will not start

  Today I attemed to install new RAM in my A60. It didn't go very well and when he was in and I tried to start the computer, it would have started with amd before turning off again a few seconds later.

  So I took the new RAM and tried to start it and it was fine. I then put the new ram back in and had the same problem, so he pulled out again, but once again with the new RAM it wouldn't start.

  How can I get to do it again?

  Hello

  Of course, you use the incompatible module and because of this unit do not start correctly. Please, send it back and order form.

  Compatible modules are:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• Kernel panic causes of Spotify

  Hello!

  After months without kernel panics, I started to experience on a regular basis, about a week ago. Crashlog

  I did some research and discovered that the problem apparently comes from a conflict between Spotify and the OS X Firewall.

  Spotify is aware of the problem, except the claims that the bug is on Apple's side. Also, they say that they were in contact with Apple developers who are aware of this.

  So far, the only solution is to disable the firewall from OS X, which I really don't want to do.

  Really, I'd appreciate if this problem could be solved!

  Thank you!

  Julius

  For what it's worth, looks like a person of Spotify is full of it.

  I run Spotify on three different Mac running OS x 10.11.x, the active firewall and Spotify has never caused a Kernel Panic, I noticed in all cases.

  Spotify 1.0.23.90.g42187855

• Qosmio X 500 02G RAM Upgrade - Compatible speed

  Hello world
  I am looking to update my RAM in my Qosmio X 500 02G to 8 GB, but I have a few queries.
  I looked in the manual and on a site of RAM config but found no answers. The toshiba also recommended that RAM has quite ridiculous prices.

  This laptop does support dual channel? and it supports 1333 MHz?

  It's the kits im RAM is seeking
  [Corsair 1333 8 GB: http://www.mwave.com.au/sku-37150059-Corsair_8GB_2x_4GB_DDR3_SODIMM_Memory_Kit_PC3_1060 0_1333MHz_Dual_Channel_9_9_9_2]
  It is also in the 1066 MHz version if that's what I use.
  [Corsair 8 GB 1066: http://www.mwave.com.au/sku-37140266-Corsair_8GB_2x_4GB_DDR3_SODIM_Memory_Kit_PC3_8500 _ 1066MHz_CM3X8GSDKIT1066]

  Alternatively, that if dual channel will not be a benefit
  [G-Skill 4 GB x 2 | http://www.cplonline.com.au/memory/laptop/gskill-4g-single-1333-mhz-for-laptop-f3-10666cl9s-4gbsq.html]

  Thank you

  > The Toshiba also recommends that RAM has quite ridiculous prices.

  Kingston modules are good quality RAM modules.
  Personally I always buy good quality RAM and I never had any problems of compatibility or performance.
  You can read here in the forum on the problems of compatibility as laptop RAM power not on after RAM upgrade or similar
  They always uses some modules at low cost.

  In general you can use the modules of DDR3 1066 MHz (PC3-8500).