PSC0LA Satellie C660: After RAM upgrade only slightly increased memory

Similar Questions

• After RAM upgrade disk HARD is not visible on Satellite A660 - 11M

  I have the Toshiba Satellite A660 - 11M.

  When I upgrade the RAM to 2 GB 2 Six gaeremynck Bios can't see the drive on Start menu please help

  And when you use original RAM modules only disk HARD visible again?

• Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

  I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

  Thank you

  > I would like to know whether to extend the warranty for laptop RAM is maintained.
  RAM upgrade does NOT affect the warranty.

  Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
  [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

• Satellite M115-S3094 freezes after RAM upgrade

  Hello

  I just added Corsair - 2 x 2 GB 200 PIN SODIMM DDR2 667 mhz memory to my laptop Satellite M115-S3094.

  Earlier I had 512 MB included with the laptop. The problem is that sometimes the computer starts and freeezes, none of the buttons work and I have to hold the button for 10 seconds to turn off and restart the computer. Sometimes I restart 2-3 times until it works.

  If there is any problem after commissioning, then I find myself using the laptop for hours like now and I won't have any problem until I restart.
  This all started when I upgrded memory. I tried to re install and it did not help.

  I would appreciate any help from anyone who has faced such a problem. I also have windows xp home edition.

  On the casablenca system, it shows 4 GB but used is only 2 GB. I even deleted one of the sticks, but I still have the same problem.

  Hello

  I think that the problem is without a doubt for new modules of memory installed
  Maybe the modules aren't 100% compatible or failed modules

  I guess the laptop ran correctly with the old module of RAM.
  This would confirm my hypothesis and I think you should test the specifications with the other s RAM

  Good bye

• Satellite A50-109: after RAM upgrade-> blue screen

  Hi all

  I bought a new patriot 1 GB ram sodimm pc 2700 as an upgrade to my satellite a50-109. After installation of the equipment on the back of the laptop, I had some problems with windows xp bsod (blue screen of death). Errors 0x000000e8. After recording with microsoft, I had to reinstall the drivers... Can someone help me please!

  Thank you
  Alex

  It seems that you are using a module of memory without a name. These modules can malfunction. It s nothing unusual.
  So I use and always buy modules memory Kingston or Infineon brand, for example.
  I have goggled autour and actually ntfs.sys error might have something to do with the fault memory.
  It s whatever the module has been properly recognized in the BIOS. Certain areas of memory may malfunction

  In my opinion, you should check if the laptop will be functions correctly with the modules of memory recommended by Toshiba

• Windows 7 Home Premium OEM upgrade does not not after RAM upgraded FRO 1 GB to 4 GB

  New installation Windows 7 Home Premium 64 bit OEM worked the 1st time on workstation Dell Precision 380 (Pentium 4, 3.0GH, 1 GB RAM, Windows XP), so I registered with Microsoft.  PC worked too slowly, so I upgraded the RAM from 1 GB to 4 GB.  PC will not start now.  Nothing on the website of dell, or the PC manual led me to believe that there could be a problem.

  After I had already performed several tests, PC manufacturer said to install Windows 7 AFTER upgrading the RAM.  However, as the installation before the upgrade of RAM and joined already, can I now reinstall the OS without affecting the OEM license.

  You can reinstall Windows OEM on the same computer. Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  If you have trouble activating Windows 7 you can call Microsoft to activate it by following these steps:
  1. with the operation of Windows, click Start, then in the search box type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4. Select the telephone activation option, then dial the given number and hold for a real person.

  For more details: http://www.sevenforums.com/tutorials/18715-activate-windows-7-phone.html

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Satellite L10-119 freezes after RAM upgrade

  My Satellite L10 is 4 years old. I wanted to update this change of RAM and HARD disk.
  I installed in RAM DDR1 SoDimm 1 GB PC-3200 (a unit) and used my computer for a few hours.

  But next time, he started to make mistakes and freeze or stop going to the blue screen.
  When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK.

  Will not track with * 1 Gb PC - 3200 * to use?

  Hello

  Case is clear!
  > When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK
  You used the not entirely compatible RAM modules!
  This is the reason why your laptop freezes!

  The fact is that your L10 can be upgraded to 1 GB RAM max, this means you need to use max 512 MB RAM module in a slot

  In addition, you can use the PC2700 200 pins (333 Mhz) DDR SODIMM modules and not of PC3200

• After RAM upgrade on stick Satellite L30 - 10V single RAM is recognized

  I just added a stick of Ram 1 GB Crucial in the L30-10 (PSL33E), but only the recognized 1 GB, the Hyundai stick (512 MB), which shipped with the laptop is no longer used by the system.

  I tried to pass it around, but I can only get 1 stick of RAM to work at the time, is 1 GB, when the two Rams are placed in slots or if only the 1 GB is installed or 512 MB when I leave the 1 GB.
  Do you have someone at - he managed to get 2 stick operating simultaneously, on this system?

  BTW, CPU - z recognize the two sticks and reports correctly 1536 MB, the BIOS but only 1 GB, in fact less, since some plans to unlock the graphics card.

  The version of the BIOS on my system is V2.80, dated 05/03/2007 and the two memory are the same speed PC2-4200.

  Hey Abe you're really cool. Sending all these links other forum users can see a lot of different themes is discussed before and using the option to search or the knowledge base of Toshiba, they can find a lot of useful info.

  Toshiba knowledge base can be found under http://eu.computers.toshiba-europe.com > support & downloads > support home > troubleshooting Knowledge Base

• After RAM upgrade Satellite P100-222 is on but nothing comes on the screen

  Hi all
  could you please help me?

  I have to update my 2x512Mb in 2x2gb RAM modules.
  If a module (2 GB) installed - it's ok.
  If two modules (2 gb + 512 mb) installed, total RAM 2.5 - it's ok
  But if two modules (2 gb + 2 gb) it does not work :(
  When I turn on my laptop the lights come on as usual and I can enter the BIOS but after installation of the screen nothing cam upward on.

  RAM SO-DIMM 2 x 2 DDR2 SDRAM Kingston "ValueRAM' KVR800D2S5K2 modules / 4G (PC6400, 800, CL5)

  Hello

  These things happen usually when you try to use memory modules live not compatible.
  I checked the page of Kingston and Toshiba and modules of 2 GB compatible for your laptop modes are:

  PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or
  Kingston KTT533D2 / 2G 2GB 533 MHz Module

  Good bye

• After RAM upgrade kernel panic

  IMac 21.5 mid 2010

  2 x Kingston 8 GB RAM

  Anonymous UUID:

  48A5979F-AE09-EDC6-A083-98F4ABD9B696

  Mon May 23 14:56:23 2016

  Panic report *.

  panic (cpu 1 0xffffff8015fb363a appellant): ' link element invalid queue for 0xffffff802a8df540: 0xffffff803673b3d0 next next-> prev 0 x 128000 prev prev-> next 0xffffff802a8df540"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.50.21/os fmk/kern/queue.h:245 0xffffff8035857c70.

  Backtrace (CPU 1), frame: return address

  0xffffff91ffcbb980: 0xffffff8015edab12

  0xffffff91ffcbba00: 0xffffff8015fb363a

  0xffffff91ffcbbb80: 0xffffff8015f4ad64

  0xffffff91ffcbbd00: 0xffffff8015f4e89b

  0xffffff91ffcbbf20: 0xffffff8015fcebef

  0xffffff91ffcbbfb0: 0xffffff8015fec375

  Corresponding to the current thread BSD process name: mds

  Mac OS version:

  15F34

  Kernel version:

  15.5.0 Darwin kernel version: kills Apr 19 18:36:36 PDT 2016; root:XNU-3248.50.21~8/RELEASE_X86_64

  Kernel UUID: 7E7B0822-D2DE-3B39-A7A5-77B40A668BC6

  Slide kernel:

  0x0000000015c00000

  Text of core base: 0xffffff8015e00000

  Text __HIB base: 0xffffff8015d00000

  Name of system model: iMac11, 2 (Mac-F2238AC8)

  Availability of the system in nanoseconds: 55566047013

  last load kext to 55419634053: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f98059000 size 36864)

  kexts responsible:

  com.apple.driver.AppleHWSensor 1.9.5d0

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.5f3

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 274,9

  com.apple.driver.AppleHDAHardwareConfigDriver 274,9

  com.apple.driver.AppleHDA 274,9

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.kext.AMDFramebuffer 1.4.2

  com.apple.ATIRadeonX2000 10.0.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  3.12.8 com.apple.driver.AppleMuxControl

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.driver.AppleBacklight 170.8.9

  com.apple.kext.AMD4600Controller 1.4.2

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.iokit.IOBluetoothUSBDFU 4.4.5f3

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.driver.AppleIRController 327,6

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.iokit.SCSITaskUserClient 3.7.7

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AppleFWOHCI 5.5.4

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBUHCIPCI 1.0.1

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.iokit.IOSurface 108.2.1

  com.apple.iokit.IOSerialFamily 11

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 274,9

  com.apple.kext.OSvKernDSPLib 525

  3.12.8 com.apple.driver.AppleGraphicsControl

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.iokit.IOBluetoothFamily 4.4.5f3

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.kext.AMDSupport 1.4.2

  3.12.8 com.apple.AppleGraphicsDeviceControl

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleHDAController 274,9

  com.apple.iokit.IOHDAFamily 274,9

  com.apple.iokit.IOAudioFamily 204.4

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.driver.AppleXsanScheme 3

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IO80211Family 1110.26

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  4.6.1 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.usb.AppleUSBUHCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: iMac11, 2, IM112.0057.B03 of BootROM, 2 processors, Intel Core i3 3.06 GHz, 4 GB, MSC 1.64f5

  Graphics card: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB

  Memory module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020

  Memory module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0 - P2P

  Bluetooth: Version 4.4.5f3 17904, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Airport, AirPort, en1

  Serial ATA Device: ST3500418AS, 500,11 GB

  Serial ATA Device: OPTIARC DVD RW AD - 5680H

  USB device: USB 2.0 Bus

  USB device: Hub

  USB Device: Card reader

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: Samsung laptop M3

  USB Device: IR receiver

  USB device: ISight built-in

  Crush Bus:

  Maybe it's the RAM.

• Could not load the BIOS after RAM upgrade - Satellite A200

  Hello

  I've updated my RAM memory on my laptop Thishiba Satellite A200 (from 2 GB to 4 GB) but unfortunately now I can't enter the BIOS. Automatically load the operating system (windows 7 64 bit).

  How can I solve my problem?

  P.S. The new RAM works perfectly and it is recognized by Windows 7.

  Post edited by: bennito

  I don't know what you've done and why this happens, but what you can do is to check if the quick start option is enabled.
  Open Toshiba Assist > optimize > HWSetup > priority Boot and check the startup speed option it.
  Remember that it is set to Normal.

  Please, check and send comments.

• Satellite A100 - 521 RAM upgrade only works with original RAM in place

  I am trying to upgrade the memory to 2 GB, as described in the user manual.

  The computer does not start with the two new modules inserted. It will start with 1 GB installed in each slot until the original 256 MB module is inserted in the drive on the right, but does not work when the two 1 GB modules are inserted. There are 2 slots and the maximum is 2 GB for this computer. It told me to update the BIOS that I have on this site, but did not work.

  I am currently using 1 modules of 1 GB and 256 MB provided with the computer module. I have a Toshiba Satellite A100-521.

  Concerning

  Lucy x

  Hello!

  The two new modules have the same specifications as the old module?

  In my opinion, the new modules are perhaps not fully compatible with your laptop or are not compatible in Dual Channel mode.
  What is the exact label of the two modules?

  For the upgrade, you need DDR2-533 modules. I searched a bit using Google and the reference is PA3411U-1M1G.

  Good bye

• HP ProBook s 4540: 14.04.3 of Ubuntu LTS works very slowly after ram upgrade on HP ProBook s 4540

  Hello, I changed the default 4 GB aData RAM sticks 8Gbx2 stick.

  No, it takes forever to start and open any aplication including terminal.

  Do you have a Linux swap partition? With 16 GB of RAM you should not have it. You also have an SSD?

  https://sites.Google.com/site/easylinuxtipsproject/speed#TOC-the-absolute-number-one: - decrease - swap - use

• After RAM upgrade my A60 will not start

  Today I attemed to install new RAM in my A60. It didn't go very well and when he was in and I tried to start the computer, it would have started with amd before turning off again a few seconds later.

  So I took the new RAM and tried to start it and it was fine. I then put the new ram back in and had the same problem, so he pulled out again, but once again with the new RAM it wouldn't start.

  How can I get to do it again?

  Hello

  Of course, you use the incompatible module and because of this unit do not start correctly. Please, send it back and order form.

  Compatible modules are:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• problems with other apps now after the upgrade only Illustrator to CC

  On a Mac. I try only to Illustrator CC. My other apps are CS6. Now when I go to open a PDF file for example - remember it's the CS6 Acrobat, I get the annoying CC sign in the window. He wants me to sign, but I'm not trying to use Acrobat CC. I try to use my Acrobat CS6.

  When you complete your trial period, uninstall cc and clean by use the creative cloud cleaning tool to solve installation problems.

  which can often solve the problem, but you may need to uninstall acrobat xi and then reinstall it when you have finished your cc trial period.

  I'm not aware of the app from cc conversion of older versions for cc versions except if you allow the application to your old versions of 'day '.  Thus, in the future, cannot update non - cc program.