an rds server configuration

Similar Questions

• Remote server configuration problem

  The problem I have is that the various dialog boxes multiple paths in the configuration of the remote server seem rather amibiguous. I tried what seems like every combination of remote and local access roads, as well as various url strings. Any combination I can't get the file to resolve a URL that works.

  Our current development configuration consists of a central server running Windows 2008 Web Server and ColdFusion 8.0.1. There are three of us using the machine, each developer has their own part on it. We each have our own set of virtual servers running from the share, through IIS on the server.

  This has been a great Setup for us because it allows almost double environment for our production configuration. However, I can't for the life of me get a remote server configuration works completely. I have a machine of secondary dev I use where I'm running CF9 locally, and it works perfectly (I am aware of people who say that eclipse doesn't really want you develop remotely). We will move our server main dev CF9 immediately, and we want to keep the centralized server dev, remote server seems how to configure things.

  It seems that the best scenario is to set up a server for each virtual server I set up. I would set a maximum as in the dialog box:

  General settings
  Server name: foo - site.com

  Host name: dev1.foo - site.com

  Other parameters

  Web server port: 80

  RDS username: my user name

  RDS password: my password

  The remote server settings

  Naming port: 2910

  User name: username admin-server

  Password: password-server-admin

  Document root: (it is a source of confusion, does she want a url? a local file as my drive path mapped "Z:\) » ? or the physical path on the server 'C:\webroot\ '? Could be a path from my eclipse installation? Also, he wants a global path? "or connected to this server config?)

  Mappings

  Local path: (Once again, similar confusion... If it is local to me, or the server? or maybe a url?)

  Remote path: (If this should be a url, and if so does an absolute url for the local path listed above? And this she the Local path is the root of the virtual host, it must then be the same as the document root [which doesn't seem to work]?)

  Install Extensions

  Root Web server: (If it's a physical path? should be related to Eclipse on my machine? or from the server?)

  Installation location: (It would depend on the web root of remote server of course)

  I keep trying different things, and end with either the CF for a project server settings telling me the project exists outside of the root of the web, or sample that url looks like [ http://[hostname]/[projectname] .

  Any help would be greatly appreciated.

  The document root must be a physical path on the remote server, for example 'C:\webroot '. This is the path on the remote computer and the path not mapped on the computer on which the CF Builder is installed.

  In maps, local path is the path on the computer on which the CF Builder is installed. Path remote is the path on the remote machine and not the URL.

  for example if CF is installed to D:\Coldfusion on the remote computer and the local computer (where CF Builder is installed) you have the files in C:\ColdFusion, then when you configure the remote server, you must define the root of the Document to D:\Coldfusion\wwwroot and then you must create a map with local as C:\ColdFusion\wwwroot path and remote as D:\ColdFusion\wwwroot path.

  CF Builder uses this information when you preview files and when you debug a file.

• Solution for Bluetooth PAN server configuration

  Task:
  -Internet on Bluetooth PAN profile
  -Connection for laptop (Toshiba Satellite A300 1 2 (WinXP SP2) with Sony Ericsson K810i with BT PAN)
  -Computer as a server of PAN (!). Lance PAN Mobile phone connection-> computer.
  You can use internet to mobile phone to laptop.

  But it's bug in Toshiba PAN-server - right click doesn't work in pan-Server tray :( (Local Russian (?))

  * Configuration server PAN *.
  1. options:
  set of 2 boxes in the Bluetooth dialog options (service of pan, pan DHCP service), the [ok] button
  2. Press win - r, type: cmd
  [ok]
  Enter (case sensitivity "") ":"
  CD "c:\Program Files Toshiba Stack\"
  TosBtPSS.exe /END
  TosBtPSS.exe /NAP

  If it is absent pan server in the status bar - check your network connection BTPAN (Bluetooth Personal Area Network) enabled in the control panel and try
  TosBtPSS.exe /NAP

  ((3 set the IP address for the network BTPAN connectivity: 192.168.0.1 (I don't know how Toshiba DHCP server works, but it works!)))
  You can use your own DHCP server configured...

  You can make these instructions batch file...

  Sorry, my bad English)

  P.S. to the developer of Bluetooth PAN server: fixed a bug, please)

  Thanks for this interesting article.

• Question of 2012 of R2 group key Distribution Server configuration.

  Hi all

  I searched online for more information on the problems of kdssvc. and addition of KDSRoot keys that have been problematic.

  In looking Site and Services snap-in and display of the Service node information I see the Server Configuration file, but no input config key Distribution of Service Group.

  I don't see anything online that would allow me to recreate the Configuration of the server. Is there a way to re - generate the Cryptography keys properly here and allow me to move forward with additions of Cle_principale. I have a 2003 with a r2 dc 2012 functional area in the field of parent and child.

  In the test of items off I see kds configs are always available and kdsrootkey can be created after the deletion of the entry of the Server Configuration. I'm looking for documents of deep dive on the subject.

  Any help is greatly appreciated.

  David.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Blackberry enterprise server configuration will not accept the connection.

  Original title: remote terminal BlackBerry or resource will not accept connection

  Blackberry enterprise server configuration

  H

  1. What operating system is installed on the computer?
  2. What exactly are you trying to achieve?
  3. What is the full error message received?
  Since your post looks like this, the problem is related to the server, Blackberry enterprise server, that's why I suggest you to report the issue to the links below for assistance:
  http://social.technet.Microsoft.com/forums/en-us/ocspresenceim/thread/84884b83-b8a4-4150-b395-19c133b6254d/
  http://BTSC.webapps.BlackBerry.com/BTSC/microsites/msbrowse.do?UMBrowseSelection=SG_BLACKBERRYENTERPRISESERVER_4_1
  I hope this helps!

• Activate connections encrypted for the database engine (SQL Server Configuration Manager)

  Hi team,

  I have a quick question, on the protocols for properties of SQL. Option:

  SQL Server Configuration Manager > SQL Server Network Configuration > Protocol for SQL_xxx (right click) > properties, we can see two tabs:

  Tab 1: flags

  Tab 2: certificate

  If I put the value of Instance of hide = Yes, 'Force Enctyption', the fact must be set to YES as well?

  Or Enctyption of the Force must be activated in order to hide the instance?

  What is recommend settings?

  I can see there are good article, but would appreciate if a response.

  https://msdn.Microsoft.com/en-us/library/ms191192.aspx

  Thank you

  + Moin

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Getting error: cannot run on the development web server configured

  I installed Visual studio 2012 and IIS 7 on Windows 7 Ultimate version. I get the error message 'Cannot run on the development Web server configured' and 'Impossible to run IIS Express' when I tried to run a web application from VS2012. If anyone knows how to fix it please tell me.

  Hello

  It is not a community forum for VS.

  Try the Visual Studio Forums

  Visual Studio development category:
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Don

• Application server configuration

  I'm putting in place the ATG app on my machine.

  I have installation 11.1 ATG with app server Weblogic 12.1.3.0. While the implementation of ICD I am error ' invalid Weblogic version: 12.1.3.0.0 taken in charge: [12.1.2] '

  Document is saying something like:

  When you install an application server, you can install a supported version and a version that is not supported by permit. Application server configurations are found at /atg/cim/productconfig/
appserver/SupportedApplicationServer.properties .
  

  [ Oracle ATG trade Web - Application Server Configuration]

  But I am not able to find the file of property mentioned in the record of the ATG.

  Could someone help me solve this problem?

  Thanking in anticipation.

  Hello

  The property file can be found in: CIM\lib\classes.jar\atg\cim\productconfig\appserver

  Please find the reference document for more information below and understand the best, hope that helps you.

  Problem installing Oracle trade 11.1 on Weblogic 12.1.3 (Doc ID 1922316.1)

  Please select a correct answer if this answer solves your problem.

  Thank you & best regards

  Suman Vernoux

• Access HTML option is not available on View Agent Install Server 2012 R2 RDS Server

  To all,

  I don't know if anyone has come across this. I've been setting up RDS Server based on Windows Server 2012 R2, and when I got to the point where I need to install the Agent from the view, I noticed that the HTML access option does not appear in the phase of the installation wizard feature selection. Therefore, access HTML for hosted applications does not work even when I activate access HTML on farms. I only noticed when I was trying to solve why the HTML access to hosted applications was not working.

  The RDS server in question is a physical server running Windows Server R2 2012 with all updates. I uninstalled the agent view, restart and then tried to install the Agent 6.2 view, but the option does not appear. Same thing when I tried the agent see 6.1.1. Any thoughts?

  Physical server is not supported by the HTML access, see details in the doc:

  https://www.VMware.com/PDF/horizon-view/horizon-HTML-access-3x-document.PDF

  Page 30,

  Host the RDS IMPORTANT must be installed on a virtual machine. Although it is possible to install the Agent on a physical machine view, the Blast protocol used with HTML access cannot access a physical machine. See Agent must be installed on a virtual machine.

• Tool to documentate the esxi server configuration

  Hi all

  I'm looking for a (free) tool that can generate a U1 esxi 4.1 server configuration documentation (in html, for example).

  I know that there are vicfg - cfgackup.pl, but I'm not really looking for a backup tool.

  Thanks in advance.

  Best regards

  Pablo.

  Take a look at this free script that generates an HTML report enough compression on your vSphere environment - http://communities.vmware.com/docs/DOC-9842

• Windows Server configured as the gateway crashes with referee interface

  I'm running the Active Directory to Windows 2008 R2 servers multiple infrastructure test lab. One of the functions as a gateway server, configured with routing and remote access. Each time, after a few hours, the network to public internet traffic stops. One way to solve is, is to restart the gateway server. When network stops, same gateway itself cannot connect to the public network, the DNS servers of the ISP ping with the IP addresses is answer. Ipconfig/release and / renew buy do a thing and disabling WAN network interface freezes. After that, try to stop and restart the server will be fallow with blue screen and cold reboot.

  WAN interface uses the pilot VMNET3 and Intel LAN interface 1000 (something like that). VMtools has been installed from the console of the last version of ESXi.

  Familiar with this problem to anyone?

  Try to change the external NETWORK adapter to E1000.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Sign out of the RDS Server

  I have Dreamweaver CS 6 and use ColdFusion 10.

  I have Dreamweaver to connect on RDS Server and would like to logoff RDS Server.

  I tried to use wrong ID and password and close the application.

  It still shows the database.

  Is it possible to disconnect from the RDS Server and leave the database disappear?

  Your information and help is much appreciated,

  Kind regards

  Iccsi

  Close DW, or switch to another site.

• [WLS 10.3] Why I didn't "Use SSL JSSE" (Server-> configuration-> SSL)

  WebLogic Server version: 10.3
  
  Why I didn't "Use SSL JSSE" (Server-> configuration-> SSL)

  Because you're using WL 10.3?

  The feature is available in 10.3.3 (version 11g)

• Web Server Configuration tool fails

  I remove Coldfusion MX 6.1 "works" of Windows XP Professional and installed MX 7. Met an error when installing on the wall of fire problems possible preventing complete installation.
  
  I went to the Web Server Configuration tool to configure IIS. When I clicked on the Add button, I get the following message:
  Could not connect to JRun/ColdFusion servers on host localhost. Possible causes: server not - running performer and fire wall blocking JNDI - restriction in security.properties host.
  
  I have disabled virus protection and Firewall window also well off the coast.
  
  I've reconfigured the jrun.xml and ColdFusion runs on its own server, but I wanted it on IIS for some tests.
  
  Thanks in advance.
  
  Mike
  
  

  > Yes is all three. I ran the two instructions that you gave me and this is the result.

  Finally, we could be something. Follow the link bpurcell.org that I have given above and scroll down to the bottom. You will see a post about Windows XP SP2 and socks.

  Apparently, there's a limit to how many socks open authorized on the operating systems such as Windows XP SP2 and Windows 2003 SP1. If we believe that, then your problem is caused by Windows XP. The default behavior of the wsconfig tool is to analyze all ports in the range of 2900-3000, exceeding of Windows XP SP socks limited.

  A solution would be to run wsconfig with a limited number of ports scanned. Follow these steps and then on the command line:

  C:\CFusionMX7\runtime\jre\bin\java.exe-DWSConfig.PortScanStartPort=2920-DWSConfig.PortScanCount=1-jar C:\CFusionMX7\runtime\lib\wsconfig.jar

• Problem with the server configuration tool Web + APSB07-02

  Recently, I applied the updated connector in APSB07-02. Today, I tried to create a connector to my new cluster CF and get the following error when you use the Web server configuration tool:
  
  "The JRun servers on host 127.0.0.1 must be upgraded to use this version of the Web Server Configuration tool"
  
  FC 7.0.2HF1
  JRun 4 Updater 6
  W2K3 SP1
  
  Is date referring too?

  The article for the hotfix has been updated. Step 7 Installing multiserver in the article also says to the jrun-hotfix - 65311.jar and save in {jrun_root} \servers\lib. This can cause problems if there are already fixes in the {jrun_root} \servers\lib. Step 7 will be changed to have the jrun-hotfix - 65311.jar put in another directory, then change the java.class.path in the {jrun_root}\bin\jvm.config file so that the jar file is at the front of the class resembles the following:}

  Java.class.Path={Path-to-jar}/JRun-Hotfix-65311.jar,{application. Home} / Servers/lib...