Answering machine in SQLLite

Similar Questions

• iPhone save personalized answering machine message

  I forgot to go to save answering machine message on my iPhone 5 s
  Please help thanks in advance

  Go to the telephone-voice mail-> greeting >

• HP Officejet Pro 6830: Receive faxes with a HP officejet pro 6830 w / answering machine

  I had an OLD officejet model that could receive faxes even if the answering machine was not connected directly to the fax machine the 6830 manual says that it must be directly connected.  My current Brother printer does NOT receive faxes because of this problem.  Anyone know if I directly connect my machine to this model (Officejet 6830) to make it work?  I won't buy it if it will not work.

  Hello @JPJ408,

  Welcome to the Forums of HP Support!

  I understand that you are looking to buy a printer all-in-one HP Officejet Pro 6830 for fax purposes. While the User Guide advise you to plug the answering machine directly on the back of the Officejet unit, it is not necessary.

  If you have a fax with an answering machine on her line, the only requirement is that the fax is set to two rings higher than the answering machine. Most of the responders are put back on 4 rings. As a result, you would set your Officejet to automatically pick up on 6 rings. In this way, when a voice is heard, you can manually respond to the call before the answering machine to pick up. If you are not home and then people can still leave messages on your answering machine. If you have a fax to come through, do not respond. The answering machine will pick up after 4 rings. At this point the fax machine "listen" on answering machine message and if fax tones are detected, the fax will take over and receive the fax.

  I hope this helps clear up any confusion.

• answering machine software for HP office jet 6700 premium?

  Hi Windows 8.

  As the office jet 6700 is attached to the phone line is a software feature (or 3rd party software) which allows the PC to act as the answering machine?

  I know that in the old days of dial-up Modem software such has been ubiquitous.

  I just want to cut my old answering machine for the configuration of the installation if possible loop.

  Thanks for your suggestions.

  Rob.

  Sorry, there is no functionality of software to allow the Pc to act as the answering machine. The answering machine is connected to the printer because it detects the printer calls.

  When a call comes, the printer reacts and reads as follows the line of the signals. He sends the call to the correct line (fax, phone or answering machine). This is the reason why the answering machine is connected to the printer. The computer will not be able to accept or guided calls or pick them up. Thanks for asking though, maybe in the future.

• hpc6180 all-in-one makes this noise when answering machine picks up even if auto answer is disabled

  help cannot use my answering machine on my phone at home because my hp c6180 all-in-one is that the sound is terrible, even if auto answer is disabled

   
  [Moved from comments]

  It could be the build-in the fan. If I'm wrong, please contact HP!

• More HP Officejet Pro 8600 - Fax answering incoming calls instead of answering machine

  I set up the fax on my new HP Officejet Pro 8600 Plus & the fax at the end past all test report & yes I used the good cable for the phone (the one that came with the fax) However when someone calls, the fax picks up the call rather than the answering machine.

  Can someone tell me how to fix this please?

  If you get only fax from time to time, I suggest to turn off the auto answer on the 8600, and when you hear the fax tone, * #123 to tell the fax machine to pick up. In this way, you can leave your answering machine like that and do not miss faxes.

• HP Laserjet Pro 200 Color MFP FAX answering machine vs M276nw

  We have the following MFP: HP Laserjet Pro 200 Color MFP M276nw

  Our office has a phone line to be shared between the phone and FAX (M276nw). The phone is a phone single line of integrated with a digital answering machine Panasonic KX-TG7531 model. I can't seem to find the right combination of settings for ringtone for the phone and the FAX that allows callers to leave a voicemail without the FAX modem tones interfere when the caller leaves a voice message. It's as if the fax does not recognize that the answering machine picked up and he continues to make sounds of modem. The tones are saved as well as the message of the caller's voice, which makes the message difficult to understand. In most cases, the caller simply hangs up without leaving a message (we've heard talk about this later).

  Please tell us how to implement. Thank you!

  Furthermore, the HP Laserjet Pro 200 Color MFP M276nw replaced a MFP from brother, but the Brother FAX has worked with the same phone from Panasonic.

  Hi crmarrio

  I understand that you are having problems of fax.

  Run this test for the fax.
  In the home screen, press the button on the key.
  Tap the service button.
  Tap the fax service.
  Touch run fax test.

  Check all these fax settings.

  Here is a url for the fax troubleshooting.

  http://support.HP.com/us-en/document/c03363598

  Go to the icon/fax setup menu/Advanced Configuration key / private receive/disable it.
  Go to thewrench icon/service/fax service/error correction/stop.

  Go to Settings icon/fax thewrench / fax/advanced/change configuration to speed it to the middle.

  Go to the key icon/fax installation base/menu Configuration/response/game of rings rings.

  (if using an answering machine-more rings on fax and answering machine or rings of mail without a voice for the fax, but receives no voicemail, should get installation of distinctive ring on the line in this case)

  Go to the key icon/fax setup basic menu setup/response/selection of auto mode.

  Go for a key icon/service menu/fax service/clear saved faxes

  Go to key icon/fax installation base/menu setup/distinctive ring/set for proper ringtone type. (if you don't have a special ringtone set on all ringtones.

  Update the firmware of the printer by usb connection.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c03363598&LC=en&product=5097654&

  Let me know the results of the fax test, and if you were able to send or receive a fax.

  If you're still having problems, let me know and I send you private message how to reset the printer.

• Using all-in-one with answering machine

  I have an office jet pro 8600 and love it.  However, I would like to know if it is possible to use the fax without having to connect to my machine.  I would use the printer and the answering machine in two different areas.  Is this possible?

  Hello

  The answer to your question is YES.
  Listed below are two ways...

  #1: having a dedicated fax line.
  #2: subscribe to a distinctive ring by calling your carrier telephone and even on the printer menu Telec.

• HP Officejet Pro 8620: after that I set up my fax, cannot answer phone or answering machine messages

  I recently set up my fax feature and now I cannot answer my phone and cannot get messages on my answering machine.  I'd be ok just to cancel the fax feature that I use really, but do not know how to do this.

  I really need to get messages more faxes.  Any help is greatly appreciated!

  Charles, thanks again for your help.  I have reset my answering machine and now everything works!

  I am so happy!!

  Thanks again

• OfficeJet 6835: Connection printer/fax to the single telephone line with answering machine and DSL router

  I change my current 2 lines phone/fax with answering machine setup and router DSL to a single line.  I have the right instructions HP and all the necessary parts and wiring diagrams, but I can't determine which of the now used phone cords is 'special' one provided in the box with your printer.  Instructions for the installation of a line saying I should use this cord between the DSL filter and the 1-line port on the printer for reliable fax.

  How can I identify this original HP cord?  And, in case I can't, what makes it "special"?

  Hi @Atlantico,

  Thanks for joining the Forums of HP Support with your request.

  I understand that you change the way that your fax is installed on your HP Officejet Pro 6835 e-all-in-one printer and you want to be able to identify the phone cord supplied with the printer. I would like to help.

  Usually the phone cord supplied with the printer is black and a 2-wire telephone cord. There are basically 2 types of telephone cords, 2-wire or 4-wire. cords 2 telephone wires are the most basic phone cords and because the fax was built around the analog telephone systems, this is the type of cord they suggest to use.

  You can identify a phone cord of 2 sons looking at the end of the connector that you plug into the phone jack. Please see the attached diagram below.

  

  Please let me know if that solves the problem, or if you need assistance.

• Uniden answering machine to answer with the SPA3102 to do XS1455

  How can I get my Uniden answering machine to answer calls from new?

  I found and tested the fix.

  I found a reference to change the rate of 1 ringtone to 60(.4/.2,.4/2) in Distinctive Ring, regional tab.
  See also http://www.jmgtechnology.com.au/spa_3000_guide.pdf

• problem of answering machine after update from z3 to lollipop

  I've updated my double z3 to 5 android, but now I can not save the message for answering machine and said unfortunately, phone has collapsed. If one facing problem like me? Can someone help me to solve it.

  Try the settings-applications-all-phone, force stop and erase the data. Turn it back on.

• Connection of fax HP PS-7520 in a different room of the answering machine?

  Just bought the HP PS-7520 all-in-One (print/scan/copy/fax/web) for my mother and have a question that never appeared to me before about the logistics of setting up the fax.

  1. its fax and telephone share the same single phone line.  (No other devices uses the phone line.)

  2. telephone service is digital, I think (if it matters).

  The old fax (12 + years old but functional) has always hung in the room same base w main phone (answering w).  Now, however, being a part of the all-in-one device, the fax is located in another room (his computer HP Envy (w) so that the phone integrated answering machine w base isn't nearby into the traditional circuit.

  Q: can you that fax be hung using one of the basics of phone in the House that does not have the built-in answering machine?

  Fax can be connected to any extension, to have the answering machine pick up first, either off 'auto response' on the fax, or set the "ring to answer" to a number larger than the answering machine. I would fix the number 6 (answering machines affect usually 3 or 4).

• Answering machine active during the call

  Hello
  I have a LP Xperia Z3 update and sinve, the phone goes to half way of answering machine if a call.
  Anyway to fix this?

  Thank you

  I am afraid that this issue can encounter if you enable the intelligent call management or if you answer a call by pressing the button answer a helmet. The problem will be fixed in the next software update.

• Photosmart C7280: question of installation on fax to PC with answering machine on the same phone line

  I have an answering machine on the phone line that would be used for incoming faxes. The guidance address how fax to PC using the phone line at all. How do you put up? Do you need a distinctive number of the ring, or you can use the same phone number as the fixed line? The answering machine will pick up faxes?

  Hi @MSS1,

  Thank you for reaching out to the forums! I understand that you are having problems of fax. I'd love to help you.

  It's not like you can fax it to the PC with the software for this model. You would have to send and receive faxes from the printer.

  This document provides steps for not being able to fax and it also provides information for the connection to the fax: can't send or receive faxes. Do not take into account the title.

  I have provided the user manual of the printer to set up the fax, beginning on page 62: Photosmart C7280.

  Here is a document to receive faxes: receipt of the Fax.

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!