Audio problems in Windows 8 gateway computer

Similar Questions

• Audio problem in Windows 8 Pro 64 - bit...?

  ---

  Sometimes (about 50% of the time), sounds don't work at all, either when using headphones or built-in speakers...

  ---

  When this problem started:

  This problem started on July 10 after a few automatic updates have been installed. According to the history of my update, this is:

  (1) update for Windows 8 for x 64 systems (KB2960837)
  (2) removal tool malware from Windows to Windows 8, 8.1 and Windows Server 2012, 2012 x 64 edition R2 - July 2014 (KB890830)

  ---

  How to solve this problem:

  Right click on "computer".

  Go to 'manage '.

  Go to "Services".

  Right click on "Windows Audio" and "restart".

  Then I restart the laptop and the sound is working again...

  ---

  After the above, I did this:

  Went to "playback devices".

  Went to 'Properties' and then 'Advanced' tab

  Unchecked "allow applications to take exclusive control of this device."

  ---

  But still, half the time I start up my system, the problem is recurring and I have to redo the steps above to make it work again... When I go to "Playback devices" and right click on the speaker and select 'Test', I get the following warning message:

  "The device is used by another application.

  "Please close all units are audio playback on this device, and then try again.

  ---

  But according to the Task Manager, there is no other application running which I think could do this... I got a Virus/Malware and did a full system scan and analysis in time start but there is nothing... While I can solve this problem by following the steps above and by restarting Windows Audio, I want a permanent problem solution please... I don't want to have to keep rebooting my audio system to rework...

  ---

  Features of the laptop:

  i5 - 3210M

  6 GB DDR3 1600 MHz RAM

  Intel HD 4000 @ 650-1100 MHz

  Windows 8 Pro 64-bit

  Quick Heal antivirus Pro

  ---

  Update KB2962407 the origin of the problem. I fixed mine to uninstall this particular update. Details can be found here:

  http://www.eightforums.com/sound-audio/49684-no-sound-device-being-used-another-application-7.html

• Audio problem with Windows 7

  Hello

  I have successfully upgraded from Vista to Windows 7 and I'm very happy with him... except. Audio glitches!
  With Vista, I have not had any audio problems but now with Windows 7 I. With the help of the dpc latency checker, I disabled all the drivers I could disable but no result.
  Can someone help me please?

  Hello

  What model of laptop do you have exactly?
  Have you installed Win7 its the most recent driver for your laptop model?

• NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

  I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

  I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

  A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

  I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

  Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

  ------------------
  Information System
  ------------------
  Time of this report: 07 25, 2012, 19:06:02
  Computer name: RAIDER
  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: P67A-UD3-B3
  BIOS: Award BIOS v6.00PG Modular
  Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
  Memory: RAM 8192MB
  Available OS memory: 8176MB RAM
  Page file: 2861MB used, 13487 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  -------------
  Sound Devices
  -------------
  Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: Yes
  Default voice playback: no
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  ---------------------
  Sound Capture devices
  ---------------------
  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.
  Driver name: USBAUDIO.sys
  Driver version: 6.01.7601.17514 (English)
  Driver attributes: Final retail
  Date and size: 2010-11-21 13:23:47, 109696 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: No.
  Default voice Capture: Yes
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Hello

  In Services, verify that the Windows Audio service is running and set to automatic.

  a. Click Start and type Services and press ENTER.

  (b) ensure that these services are defined accordingly.

  c. right-click the service, and then click Properties.

  According to the DXDiag, there is no default sound capture selected.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes

  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

  Capture audio by default: No.

  Default voice Capture: Yes

• Satellite P100 - 347 (PSPA6) and Conexant audio problem in Windows 7 64 bit

  He is a [old problem | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=175972#175972] which seems to have affected many people.

  Conexant HD Audio (hardware id: HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31 & REV_1000)

  There has been no official driver published this work in Windows 7 64 bit. It works fine in 32-bit, windows 7, and using different drivers from other sources + partial + fix can be found.

  Using these drivers:

  [Audio 4.8.0.0 | http://209.167.114.38/support/Download/files_downloads/pspa1c/vista/Audio4.8.0.0.zip]
  [sp35683 | ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35683.exe]

  and some of the advice [here | http://laptopforums.toshiba.com/t5/Windows-7/Windows-7-64-bit-drivers-for-P100-P105-Users/m-p/67516], it is possible to get the proper functioning, but * only * when using the S/PDIF (HD) audio output. When the S/PDIF cable is removed the internal speakers make noise for a fraction of a second, then silence.

  I tried everything and this issue has been around for months and months, but no perfect solution seems to exist. I was wondering if there is a way to update the drivers of the HD Audio Controller, integrated in Windows 7. Or maybe a hack that allows the internal speakers continue to work (they work for one second!)

  Please, any help on this would be greatly appreciated

  Hello

  The Satellite P300 and P500 Satellite supports the audio chip Conexant too audio driver published for these two models of laptops should work on Satellite P100!

  Please check this!

• Audio problem with Windows media player, after loading itunes

  I run Vista Home edition.   Recently added itunes as was to connect the iphone to upload photos.  Seemed to have lost my sound?

  I run external speakers and Realtek High Definition Audio driver.   Do check all the online help.  Drivers, connection and speakers all ok.

  I understood now if I run the audio output jack on the front of the box and use itunes "I sound" - However, this is the only combination I can go to work.

  The rear audio input does not work & neither does any what noise of Window media player, internet or audio files other than itunes, from the front exit. .  Help?

  Hello

  What happens when you connect before making and using Windows media player?

  I suggest you follow the steps mentioned below:

  Method 1:

  Check if take exclusive control of device is disable and check if the problem persists. Follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click sound.

  b. on the read tab, select the playback device, click Propertiesand then click Advanced.

  c. Uncheck exclusive mode applications priority.

  d. click apply , then click OK to save your settings and check if the problem persists.

  Method 2:

  If the previous step fails temporarily uninstall iTunes in programs and features, and check if the problem persists. Follow these steps:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For your reference, you can follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  You can also update audio driver follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Audio problem with WIndows 8 OS of the beats on the Pavilion DV6-6109tx

  Hello! First of all, my apologies if I posted in the wrong section or the bad, hp support forum do not know where to post.

  Now, coming to the point, encircled sliders Beats Audio Control Panel do not work as shown in the attached snapshot, makes no difference at all.

  

  Since I couldn't find Windows 8 drivers for my laptop model (very strange since I saw older models, getting divers to windows 8, but not my model), I tried different drivers but none of them work.
  These are audio driver packages I've tried:
  sp58226.exe

  sp59154.exe
  sp59861.exe

  Without these parameters of non-working is terrible.

  So if anyone can help me, I'll be really grateful.

  Thank you.

  Just to note, it does not appear that this unit has been certified for Windows 8.

  This site gives an idea of what to expect during the upgrade to Windows 8.

  The only step I can recommend at this stage is to install the driver of Windows 7 BEATS being related to the driver software audio compatibility mode.

  1. Download this driver.

  2. run the download when it's over. Follow the instructions and you should get a screen that asks you where to save the files. The default value must be c:\swsetup\sp55094. Take note of the destination on the screen. Click next and must complete the extraction process.

  3. after extraction, it opens a new window for installation. Cancel this window.
  Navigate to the folder of extraction.

  4. in this folder, find the real Installer. This is usually setup.exe. Right click on this file and select troubleshoot compatibility.

  5. follow the resolution of compatibility issues by selecting automatic options.

  6. one of the Setup screens will be a button for test program. Click here to begin the installation.

  7. Once completed, it must be installed in compatibility mode.

  This will give the best chance of success. If it does not, then it's a deeper problem of compatibility as Windows 8 driver architecture is different from Windows 7.

• Problems with Windows Defender, the computer support.

  I have spyware doctor™ installed and registered on my computer. Yet windows defender has repeatedly popped up and resumed my computer turning off not only spyware doctor™, but also all the other programs on the computer. I do manual restore just to remove the program. Also when he takes over the system it starts automatically from the internet and brings up all kinds of advertising. How this program can be stopped. All my firewall and security settings are set to high. Windows allows however in it because it has the certificate of microsoft.

  This is like Microsoft's Windows Defender. It seems that your computer is infected, probably by a rogue security program. The real Microsoft Windows Defender doesn't not part of Windows XP.

  Your system is infected with a rogue antivirus program. It's called "thugs" because he pretended to be a good guy but is really bad. Don't pay them!

  Search for removal here Bleeping Computer how removal steps - of - http://www.bleepingcomputer.com/forums/forum55.html
  or here - Malwarebytes malware removal Guide - http://tinyurl.com/5xrpft

  Malwarebytes' Anti-malware (MBAM) or SuperAntiSpyware will often do the job. Both have free versions and you don't need to buy these programs.

  These can work for you, and all can be good. However, in many cases the computer will also infected with other horses of Trojan and protected by a rootkit. These machines are extremely difficult to clean. If your machine is one of these cases, either the interactive assistance to one of the specialty forums listed in the link below, OR take your machine to a professional on the local computer OR backup your data and do a clean install of Windows. It's your choice. I do not recommend using BigComputerStore/GeekSquad types of places.

  http://www.elephantboycomputers.com/page2.html#HJT-links MS - MVP - Elephant Boy computers - don't panic!

• security problems of windows in my computer

  I have a message on my screen that says windows 7 7601 compilation this copy of windows is not original

  Want to message I need to validate my windows by sending the register number using their directions

  I have can´t the report as bad intention, because the computer shut down my internet comunication wiriting white

  How can I eliminate it?     I bought my computer 5 years ago and works very well untoil 1 month ago

  Hi Gabriel,

  To resolve your concern, we found a useful solution since a thread answered by Andre Da Costa on this link: Windows 7 build 7601 this copy of Windows is not genuine.

  Kind regards.

• Audio problems in Windows XP Pro Service Pack 3 (No Sound)

  I have a Dell Dimension 5150C desktop at work and when I left the sound worked. Now the next day no sound. I have a system of speakers Logitech X - 230 hooked to it. Everything in the MARKET. I've updated the Sigmatel audio drivers but still no sound. Help!

  Restored to an earlier date and seems to work now. Thank you

• Windows Media Center - audio problem on recorded TV

  My PC (Vista Home Premium) is connected to a widescreen TV with a HDMI cable and antenna lead.  Since we had in 07 big sound worked to record TV Live hi-def with Media Center and play on TV.  Suddenly, probably due to the recent update of windows Media Center, the audiocassette see the TV does not work.  It must be a software bug in Media Center because I can watch internet programming on the TV and the audio works fine.  Even Media Center sounds play fine.  Also the TV recorded see fine audio playback on the PC monitor, the only problem is on the TV. Does anyone have this problem or any idea of a solution?

  Hi Jwphl,

  Try to change volume settings and see if that fixes the problem.

  1. double-click on the icon of volume control main windows in the taskbar

  2 options-> properties > look for the choice of the mixer device.

  3. Select your tuner > check all boxes

  4 ok

  If this does not work, try the system restore and then install the updates manually one by one.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Audio problems in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Audio problems in Movie Maker

  I have audio problems with windows movie maker, my speakers are on & works with itunes that do I do? The sound is not muted and if I go to youtube or I can listen to the music from itunes, but when I try to watch a movie that I created in windows movie maker, it plays, but just with no sound... Also, I can't play instrumental music files (which are downloaded) in a movie instead, I did being able to hear mp3s, I downloaded & I used to be able to play in a film I've done... I have no viruses either so I need to know what the problem is... I have antivirus protection & it automatically gets rid of the virus if I computer, so this isn't the problem, please HelP!

  Movie Maker has compatibility issues with. MP3 files...
  It may be worth trying to convert the. MP3 files to the
  . Format WMA before you import into Movie Maker.

• problem with windows update - said failure to configure updates changes in recovery

  Original title: problem with windows update

  computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

  Hello

  Thanks for the reply.

  Have you checked by installing the update manually?

  Send more information on the update failed, code number and update KB message.

  • Press the Windows and X keys simultaneously.
  • Click on Control Panel, then click on Windows Update.
  • Click view update history.
  • Double-click the update.

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Audio driver for windows XP problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I can not load my driver for audio. Windows has apparently a patch called audio function UAA for HD driver. Can I download it from the internet, but I don't know how to install it in the zip file

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  What brand/model computer do you have?   What type/model of your audio card/chipset?

  I recommend that you get Microsoft OS patches only from the Windows XP Update tool:

  1. Beginning
  2. Control Panel
  3. Look in the see also group
  4. Click on Windows Update

  If you get the OS patches from anywhere other than:

  1. The MS Windows XP Update Site
  2. Your computer manufacturer Web site
  3. or
  4. Your card device or Web sites

  you run an unacceptable risk for malicious software.  As far as I know, Microsoft puts all its pilots on the "Windows Update" site, which should be accessible from the control panel.