Ban suddenly inoperative; Indicators of strange light Dock

Similar Questions

• The indicators are not lighting on Satellite series

  The light is yellow, the others do not work. The laptop turns on, runs on battery, everything, but the indicators do not work. What can be the problem?

  Hello

  just a quick question: is your laptop work properly. (Except that the indicator thing)? If Yes, you have two options:

  1. you can accept.
  2. you can try another adapter (if available)
  3. you can try it without the battery inserted. Just remove it.
  2. you can send your machine to a service partner chartered for a checkup of material (if you need a link to find the service partner near, it's here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT)

  Otherwise I have no suggestions for you since I really Don t know what is wrong with your machine, but I guess something with your powersystem is not OK.

  Welcome them

• All of a sudden I have two flashing lights on my keyboard the SHIFT key and press the end/pg.

  I met a problem to wake up my laptop (Pavilion dv7-1270us) this morning.  Initially, he doesn't wake up and had to do a hard reboot.  Now I have two flashing lights on the keyboard - the caps lock light and one on the end/pg key on the numeric keypad.  I ran several diagnostics and that you can't find an answer as to what it is.

  Hello

  You are welcome and it's good to hear you got it working

  All the best,

  DP - K

• Featuring strange light in the "Normal" display mode

  Hello world. I would appreciate your help with a problem that had me driven nuts today. I'm sure that there is a simple explanation - but I'm certainly not!

  I had another designer working on one of my InDesign grids and when I open in Normal display mode - there's this strange cyan highlighting (see screenshot). I asked them to let me know if they changed something in the document preferences, but they did not get back to me.

  It does NOT highlight a police problem - there is no problem with fonts and no pre-press error so I'm sure it's just a display problem. Any ideas, what is on or changed guys please? Any help gratefully received...

  Thank you very much

  Rosie

  

  It looks like the highlight of style-override, such noted earlier today in another thread:

  (it was red in some prior versions, but now is cyan)

  Re: IDML - red lines, but no bar

• Front USB Ports suddenly inoperative

  I installed an SSD as drive 0 and moved the former player to Player 1. In doing so, I can have disconnected something because now my front USB ports are dead.

  Can someone tell me what controls the front USB ports or where I can get a diagram of the motherboard for the 8700-1262 XPS?

  Thank you.

  It is located in the owner's manual on the link below, download it and go to page 13 0f the PDF document

  www.Dell.com/.../manuals

• Strange light menu on film when overlay DVD aired on television

  Maybe it's a problem of TV, but when I played my DVD Encore engraved for someone else on TV, they noticed the large 'first reading' kind of ghost or superimposed title menu VERY vaguely more they real film in some areas, the actual film that plays AFTER you press the "play movie" button and the menu is "rejected" (and not the transient). I noticed it too, even if I had played the film already maybe a dozen times and not noticed. They immediately saw the first time, they have looked at. The TV is a Vizio LCD 32 ".

  It is not typical of ghost because it's an overlay of something that is not supposed to be on the screen (at the time) at all.

  Has this happened to anyone? Or does anyone have an idea of the cause? I don't see ANY signs, nor could anyone else, the overlay even on my laptop when played the movie played from the internal DVD.

  It is a separate issue (but same disk) when my set-top DVD player skipped the transitional film on my TV but it plays on my laptop.

  I find not even difficult to use or know, the problem is these unique anomalies I've experienced when still-practice use... which also confounded the experts.

  Thank you for that. It seems that my brand of dark humor. Hope he does well and good luck.

  Hunt

• Strange layout, black background, yellow text and in the Panel

  Hello

  Suddenly, we have some strange provision. (almost unreadable) on our servers Windows of R2 2012. All the windows stuff, like control panel, software to explore, add, and delete files, etc. have a black background and the text is yellow. So it seems something wrong with the libraries to create these windows.

  The Windows desktop is not involved with this problem.

  Someone at - it an idea in what direction I should look at?

  Thank you very much

  Kind regards

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I remove the flashing lights on the photos?

  It's very strange and really curious what it is. Sometimes on the images, e.g. bing images and even now on my flash drive images, there are little flashing lights that looks almost like Christmas lights usually located on dark areas of images. Simply load the flash player and seen even on here so I wonder if it has anything to do with the flash player. Has anyone ever heard talk about this before? Thank you

  original title: strange lights on photos

  OK I got it is VLC it. While playing a video with VLC, images appear in this way. Strange one indeed lol.

• HP Stream 13: missing red light on windows button mute 8

  Hello

  I got a newish flow HP 13 laptop win 8.1 64bits

  suddenly, I have no red light on the button mute sound.

  The dumb shows on the task bar and works the sound muted, but there is no red light on the keyboard button

  Any help would be appreciated.

  Thank you

  Thank you, David.

  Well I tried to look for recovery and he gave me HP recovery with the ability to reinstall all software, etc.,

  I could not find how to select only the drivers.

  Anyhows, while looking for how to select just reinstall the drivers, I have neede to do windows update and heypresto red light is back.

  So answer you prompted me, and now we are committed.

  Thank you very much.

• Windows Mail strange behavior

  For the last few weeks, Windows Mail suddenly started to behave strangely:

  1. in my 'box', when wants to delete a message that I have highlighted, it removes several other messages next to him (which I have not highlighted) at the same time.

  2. when I select a message in my Inbox, I just want to look in the preview pane, it opens this message several times.

  3. when I hit the answer on a message, it opens several response messages.

  I am running Vista 32 bit Ultinate. Any ideas?

  Hi Diana,

  Thanks for the reply. Actually I just found the cause of the problem. In fact, it was because of my mouse! My mouse had to send double click or something. I changed the mouse and everything is back to normal. Thanks for your help anyway.

  Rgds,

  Kris

• Adapter WiFi my laptop has suddenly stopped working.

  Operating system: Microsoft Windows 7 (32 bit)

  I was in the middle of my routine of navigation when all of a sudden:
  -My WIFI is out
  -Light network on my laptop (F12 key) turned RED
  -Not visible in Control Panel networks with wireless networks.

  I did something unusual or installed software or antivirus software etc., which could possibly cause this.

  So far, I tried on but none of them worked.
  -Deactivation and activation then the WIFI adapter.
  -Uninstalling, then reinstalling the latest driver for the WIRELESS card.

  -WiFi F12 key.

  Help, please.

   

  System Imformation:

  HP Notebook 1000 series

  Windows 7 Home Premium 32 bit

  RALink RT5390R wireless 802.11b/g/n 1 x 1 adapter

  I use my Microsoft Security Essentials antivirus.

   

  

  Umair salvation,

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause of the problem.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Are you able to connect any other wireless device to the same network?
  2. Are all the lights on the Modem/Router Green?
  3. Have you tried to connect your HP laptop with wired network? If so, was the same result?

  Problem with the random disconnection of a wireless network can be triggered for a variety of reasons. To find out the exact cause of the issue, I would recommend that you run the network troubleshooter utility.

  Network convenience stores

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.
   
  Method 1: Disable IEEE 802 authentication. 1 X

  To disable authentication IEEE 802. 1 X, follow these steps:

  • Click Start, type ncpa.cpl, and then press ENTER.
  • Right click on your wireless network connection and then click Properties.
  • Click the wireless networks tab.
  • Under preferred networks, click your wireless network, and then click Properties.
  • Click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network
  • Check box, and then click OK twice.

  Method 2: Disable the IP assistance service

  • Hold down the Windows key and type R, type "services.msc" (without the quotes) and press enter
  • Scroll down to the IP assistance service, right-click on it and select Properties
  • In the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  • Then click on "Stop" to stop the service from running in the current session
  • Click OK to exit the dialog box.

  Method 3: update the Firmware on the router

  Download and install the latest firmware for the router, in case the steps above fail to resolve the problem. If your router is Netgear, then you can follow the steps below.

  NET gear 3700 firmware update

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• What is this strange point in my canvas?

  I was working on a piece of digital artwork when something strange happened with the keyboard, and all of a sudden I have this strange point stuck in the file!

  It is the little circle in the middle of the white canvas with the 1 next to him. What is it? I can't get rid of it. I have tried many other tools to see if it was a point in there, but I can't understand it. I also went through the display options and transformed him remains off. What is this, and how do I get rid of him? It's boring and useless in my digital painting.

  

  That is a point color sample select sample color point tool in the toolbar, and then click clear of this button in the menu bar.

  

  

• Export strange problem CS6

  I have a stange problem when I export to PDF files.  I created a template and I have been using the same model for all time and all of a sudden I have this strange problem.  I opened the model, change the info that has got to change and then I've save it under a new name in a new folder, and then I export the file in PDF format.  Normally when I export the file, the name in the dialog is the same name that I saved the new file to... for example if I save the file "M9635 Blue Springs evidence" which is what is in the file name dialog box when I go to export it.  For some reason, for these last days, it now says 'Model file Proof' (which is the name of my template).  I have to go back into the folder I saved the file and name the new... anyone know why this is happening? Help, please!

  It must reset the file name when you do a save as, but since it does not, try to export the file to .idml. I would like to try that on the model, too.

• Reset SMC

  Hello.

  I am a member on these forums and I always want to learn new things.

  What is the SMC reset?

  When is it used?

  It will erase all personal data files?

  As shown on the reset of the controller of system of management (SMC) on your Mac - Apple Support

  In some situations, you may need to reset the System Management Controller (SMC your computer). Learn to identify these conditions and to reset the SMC on Macs with Intel processors.

  The MSC is responsible for many features of low level on Macs with Intel processors. These functions include:

  • Respond to the pressures on the power button
  • Meet the display of opening and closing on portable Macs
  • Battery management
  • Thermal management
  • The SMS (motion sensor sudden)
  • Detection of ambient light
  • The keyboard backlight
  • The status indicator light (SIL) management
  • Battery status lights
  • Selection of an external (instead of internal) video source for some iMac displays

  Some indicators are:

  Fans

  • The computer fans operate at high speed, even if the computer does not have a very heavy use and is properly ventilated.

  Lights

  • The backlight on the keypad seems to behave correctly (on Macs with this feature).
  • The status indicator light (SIL) seems to behave correctly (on Mac computers have a SIL).
  • Battery LEDs, if present, appear to behave incorrectly (on portable computers that use non-removable batteries).
  • The backlight of the screen does not correctly to changes in ambient light on Macs with this feature.

  Power

  • The computer does not respond to the when you press the power button.
  • A Mac laptop does not respond correctly when you close or open the cover.
  • The computer sleeps or stops unexpectedly.
  • The battery does not seem to load correctly.
  • The MagSafe LED power adapter does not seem to indicate the correct activity.

  The system performance

  • The computer is running unusually slowly although it does not abnormally high CPU utilization.
  • Application icons can "bounce" on the dock for a while at the launch.
  • Applications may not work correctly or may stop responding after the opening.

  Video

  • A computer that supports target display mode does not switch in or out of target display mode as expected.
  • Target a computer that supports target display mode toggle in or out of view at unexpected times.

  Enlightenment of port

  • Autour lighting of on a Mac Pro I/o ports (end 2013) does not turn on when you move the computer.

  And no, it will not erase all personal files.

• several different: crashes, modules and parameters

  parameters: is it "my quick links" part of the thing about firefox? If so, how can I get rid of him? Thank you.

  modules & crashes: I had downloaded the [I'm JUST in the middle of this, typing had firefox crashed] I had just downloaded the youtube click downloaded for the 3rd or 4th time (he kept off work). I downloaded some videos and then the third just would not work.

  I kept trying and suddenly, firefox started really strange: the labels on the tabs all changed in 'new tab' although they were always pages they had been. When I would click on a tab that he turn not lighter as usual, but remain the darked out shadow of tabs is not in service, even if the tab window is open.

  I thought, it's not cool and everything closed and restarted the computer. And for the first time in the year, I got this computer I tried logging in the way I had every time, with my photo password and for the first time... the password is "incorrect". (It wasn't, but the computer thought it was).

  The main user, who was the administrator, had been devastated. The files are still there. The administrator was not. 'He' has disappeared. (Bank of Microsoft people accepted).

  Any thoughts? (PS. I'm not on the computer on which what happened - is at the Microsoft store. But most of what was on it's on this point (it was transferred) and there is an identical machine. I'm going to click on the button "Add automatically" below, but wanted you to know this, in case it makes any different.) ence

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked