Battery not be dependent not on PRS - 600

Similar Questions

• PRS-600 USB device not recognized

  I am unable to get ereader PRS-600 to be recognized by the computer (Win7).
  I tried to update the software (even if I think it's in)
  (date) but the window 'connect a PRS-600 to update' does not progress and the update button is dimmed.
  I deleted the "unknown device" in the drivers, but when I reconnect the USB cable and the ereader, I always get the display of device not recognized and the message "USB device not recognized".

  I seem to have solved the problem. I contacted Sony through esupport and a chat with a tech.

  Make sure that the battery has some charge inside. Completely charge if you can.
  Stop eReader (fully)
  Remove the SD card
  Press the button Reset (at the bottom of the ereader)
  Turn it on
  While the display shows "Open book", at the same time press the button to "turn the page" (back) and the Volume button until the "Reset All" + screen
  Enter 'Yes' to reset the ereader. You may need to configure the screen (X button with the tip to draw at various points)
  If you charge the battery, you may need to contact the support chat for sorting.

  Good luck!

• No noise and cache-battery not charging - Satellite L755 - 1 CD PSK2YE-08T00YFR

  Hello

  I have two problems with my toshiba L755 - 1 CD PSK2YE-08T00YFR

  1: no sound

  When I try to grab the microphone into the mic port, the sound Manager, it freezes and any use of sound programmes it freezes like vlc, I turn off the audio Manager Windows, disconnect me and logging devices device when I clicked in the sound icon troubleshooting the problem and the noise come buck and when I again seized the microphone he not freeze the sound Manager , I disable the audio device in the Windows Device Manager, and I continue to work without sound for 30 min ~ 1 h, I reboot my pc to start windows (windows 7, I don't remember what happens may detect a new device), I click on the sound icon troubleshooting two devices (photos attached) I chose 1 and it doesn't solve the problem but the speakers work not , I'm going to the sound Manager I see a disconnected device (maybe my card sound, pictures attached) and two new devices (attached pictures) and I see some changes in the reliable data connector (attached photos), and in the tab input device, I see a disconnected device (maybe my card sound, pictures attached) and three new device a MIC webcam (photos attached).

  before this problem the webcam and microphone webcam not working do not (I think I have hardware problem - webcam with sound card).

  I restart my pc and I chose "load factory default settings" from the bios when windows start detects a new device (webcam) but the sound does not (webcam and microphone webcam works fine now).
  I have try to disable the webcam and sound card, enable the sound card, reboot, load default... linux live cd... nothing, no noise.

  I try to test the bios beep, it works, I can hear a sound signal.

  I don't know how to solve this problem
  I need noise, I miss her, I can't do anything without the sound, please help me

  Attachment 558 Attachment 559
  
  

  2: battery not charging

  My maybe of battery 30 ~ 40%, when I suspend my pc (for 8 ~ 11: completely discharged battery) I forgot to load it, the morning I plugged it in HQ, 2 hours the led remains red when I turn on my pc and check the battery level, I see only 4% (hip, accused), I remove and buck battery but does not support he notices 4%.
  How can I recharge my battery?

  I need fix the sound problem

• Equium A300D - 16 c - battery not detected after replacement

  I have an Equium A300D - 16 c. The original battery was shot while I bought a stack of real PA3727-1brs 12. I have put in the laptop, it seems to load, but in the corner, he always says no battery not detected even if its load on. When I leave the charger it says remaining unknown.

  I tried the usual stuff to go into Device Manager and uninstall control compliant apci and still he has not solved it self. I've also updated my bios to the newest one. I just wanted to know what could I do so I can see how much battery is left, and if the laptop can recognize I..

  Hello

  Is this a battery Toshiba of origin of an authorized service provider?

  Usually, the new battery should be detected after the first start, I recommend that you charge the battery while the laptop is turned off. Start the laptop with battery only and check if she recognized properly s.

• Tecra 8000: battery not charging

  I have a laptop Toshiba Tecra 8000 works excellently on the radio but cannot get a battery charge! I have 2 new batteries, but when I go to power options it says battery not detected. However if you pass the sector off the power the computer will run on battery for a few minutes.

  Is that all I have to do to recharge the battery because it denies services to broadband radio if I can't charge the battery.

  Thank you in anticipation

  Roy Drysdale

  Hello Roy

  As much as I know there is no any kind of parameters for the battery. Everything works automatically and power of electronic power control controls this. Software gets some info from the hardware store.

  If the battery is not recognized by the system, I'm afraid, there is not much to do and the unit must be checked by the service of the laptop.

• Qosmio G10-133 - battery not detected after upgrading to Windows 7

  Hello, I hope someone can help my frustrations here.

  In recent weeks, I successfully upgraded my laptop to Windows 7, an increase of memory to 2 GB, bought new power cord for laptop, new battery and resolved all the issues that Windows 7 has cast on me. The laptop and runs like one dream other than a question that seems to have had worse.

  The laptop no longer recognizes the new battery. (battery with a cross through it and a photo of current) For about a week after installing the battery, this has worked fine but now does not detect everything. I don't have any errors in Device Manager and windows recognized the ACPI etc battery inputs and has no problem. I also loaded the package of Toshiba value added that Windows 7 has found for me but still nothing. Battery not charge even though sometimes the battery works for about 30 seconds to start up if the battery is back removed and implemented, then stops again (once Windows loaded) I tried many things like the disabling of the driver, reinstall battery etc, but nothing. I tried the iniitally of battery with Windows XP and worked well.

  I have also searched the web and saw that many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS, but Toshiba have not released an upgrade from the original in 2004 (which is for WIn XP Media Center), and there is no settings in my BIOS for ACPI etc.

  In addition, I can not calibrate the battery because I can't do anything with it. I don't think it's a question though.

  If anyone has any ideas I would really appreciate it or all the links to the drivers etc.

  If this is sorted my laptop should last for 5 years!

  Thanks for reading this.

  Dickie

  Hello

  First of all, I doubt that many other laptops equipped with Windows 7 have this problem. I've never heard of this and normally charge the battery will not be controlled of the OS. It happens automatically and your battery will be charged if the AC/DC is plugged. If the OS doesn't affect it!

  To be honest, I also don t know why your battery isn't detected, but what happens if you turn off the laptop and let the AC/DC adapter plugged in for 24 hours? After that, it should be possible to work on the minute of the battery for 1 hour or more.

  If this isn't the case, it seems to be a hardware problem, maybe the battery doesn t work correctly and should be replaced. You should contact the retailer where you bought

  By the way: some nice and interesting tips on battery:
  http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

• Toshiba A300 PSAGCE battery not detected

  Hello everyone.

  I have a Toshiba Satellite A300 (PSAGCE) which worked well since I. Recently, he showed "battery not charging". I went to see what I could do and someone advised that I should update the BIOS. So, I went to the website of Toshiba and downloaded the update for my BIOS. I have install without problem. He now has the version 2.20. The problem of "battery not charging" had disappeared.

  I had a new problem: battery not detected!

  The battery worked well and he gave me 2 hours of normal use. Now, it is not "detected". I did everything I could think of. Do you have the BIOS reset (pressing on the WE / OFF button / stop for 30 seconds), I left it with the battery for a few days, etc...

  When I connect the battery, it shows an orange light for 5 seconds and he died later. I don't know what more I can do. I contacted Toshiba in my country without success. They have not yet responded to my email.

  Any ideas? I tried with another charger than computer shows the same.

  I have install as a program of "batterycare.net" and it shows that I have 1.40 hours of battery, but as soon as I remove the cable ca, the computer shuts down without power.

  I guess I won't be needing help... I flashed my BIOS with a lower version that I had (2.20 > 1.80) and now it does not start even upward.

  I'm kidding not things for good.

  Any changes to save it?

• Real battery not attached! ?

  I have laptop Lenovo Z570 after my installation of drivers, I tried to install the software Center solution for the control of hardware device and system of Lenovo. I have solved all the problems, but there is always a message in the center of solution showing this real battery not attached. I checked the battery series and the number of piece and found it's prescribed parts that came with your laptop and user written in textbooks. What really is the problem, it is the true message please see the snapshot of the message.

  Note of the moderator; photo showing s/n, edited for the protection of its own

  If you're referring to this "Solution Center":

  http://support.Lenovo.com/en_US/product-and-parts/detail.page?docid=PD022501

  See under "supported systems": download page

  http://support.Lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73784

  Your Z570 is not supported for this software. Most of the functions will work on your system, but the battery report no not because you do not have the "Power Manager" in your Z570. I think that you have the software of "energy management".

  I have the Toolbox Lenovo's ThinkVantage (LTT) installed in my Y470 (Win 7). This software is also 'not supported' for my Y470. Really, it was created for the ThinkPads, but everything works, EXCEPT the "unloaded" because I do not have the installed "Power Manager". The error, "genuine battery not attached" isn't the truth and false. You should put your faith in the software of management of energy says.

  There is no "difficulty" to do this, because this software was not created for your 'Z' Ideapad series.

  I hope that this clears the problem for you. Be happy, if all the other "Solution Center" programs in your Z570.

  See you soon

  DragonRider

• ProtectSmart 15-n267ca: battery not charging

  Computer works when it is plugged in with the battery and the battery power, but will not work on battery alone. When it is plugged in to the power it says connected but does not support. Does this mean that my battery died or could there be another problem?

  Thank you.

  Hello @PFM21,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post about the battery issue and wanted to help you!

  There may be a problem with the battery.  It is possible that the battery needs to be replaced.  First of all, try to review the following documents and let me know how it goes:

  HP laptops - test and calibrate the battery (Windows 8)

  HP laptops - battery not power Notebook or hold a Charge

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• battery not charged after the power failure

  I have a HP ENVY 14-2050ed Beats Edition Notebook PC

  I was a shortage in the supply cable which caused my HP down.

  After restarting the battery wasn't in charge more. The laptop works fine when it is connected to the (new) cable, but battery does not charge and the laptop does not start with a charged battery.

  I ran all the steps at http://support.hp.com/us-en/document/c00259897 , but he has not found the cause of the problem.

  What type of repair is required to fix this problem?

  Can you recommend a repair center in the Netherlands, or near Rotterdam?

  Thnx

  Onno

  Hello

  I replied to the other thread on this topic:
  http://h30434.www3.HP.com/T5/notebook-hardware/battery-not-charged-after-power-shortage/m-p/4257042

  Thank you

• Battery not charging - Thinkpad E531

  Dear Lenovo,

  I have been using Windows 7, but I recently changed to Windows 8.1.

  In Win7, I was able to install and use the Lenovo power management software, and I changed the threshold of 40 to 50% battery.

  After I installed Win8.1, I realized there is not any software for Windows 8.1 E531 power management, so I can't charge my battery above 50%.

  It seems that power management software makes somekind of related material change or do not remember my previous settings which I did in Win7.

  How can I change the thresholds without reinstalling windows 7 and power management software?

  Could you give me a link to a management software can be used for Windows 8.1 E531 Thinkpad power (which is 100% working)?

  Another solution?

  Thank you!

  Hi Tray86,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the battery not charging over 50% on your ThinkPad E531.

  You must change the setting of control dependence of Lenovo to always fully charged, please visit the link below and follow the steps from that.

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/ThinkPad-battery-won-t-charge-past-50-under...

  I hope this helps.

  Best regards

  Agnes Kumar

• Windows7 HP Pavilion dv6 Notebook PC - battery not detected

  Hello

  I just bought a new battery, precedent is 4 + years.  During the installation of the battery in my status bar icon indicates it AC is powered, but the battery has a red cross on it.   When I hover over the icon it tells me "battery not detected."   I tried everything that the HP article for 'battery not detected' I found, but the recovery of the system.

  What are my options now?

  Robyn

  Problem solved... returned to the seller.

• battery not recognized

  my battery after a long period (> 2 years) unused (worked fine the last time when it is used) is not more recognized after insertion. It says battery not detected. someone has experienced this problem before & was able to remedy? research on the net, it is recommended by acer UK & USA for a similar question to the upgrade of the BIOS to resolve the issue. wanted to verify if someone did before for model at THE front of the BIOS upgrade. Thank you.

  
  

• Upgrade of Windows 10 - battery not detected

  Upgrade Windows 10 has left me with battery not detected laptop Aspire 5738. Already tried the reset of the coercive power, no luck. If I can't find a solution, I need to roll back to Windows 7 or be stuck with a portable desktop computer. Any ideas or suggestions?

  Thanks to Alfin72 in the Windows 10 forum for a solution that worked:

  'Please check if you can do a reset of the battery driver. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. »

  The solution worked great!

  I also ended up making a coercive power, then reset because it is now detected the battery but did not load. To do this, simply unplug everything (including the battery), power for 15 seconds button (you won't see anything happen), then reconnect and restart. After that windows will appear, give it another 30 seconds, then put battery back in. Now, it's all good!

• Laptop battery not charging not (630 HP)

  Hi all

  Laptop battery not charging. When I plugged on current alternative, it shows plugged in, not charging but acute battery

  load. I change the battery but problem not solved. Then I replaced the power supply but problem not solved.

  Advice me please.

  Cell phone: HP630

  error: no current charging

  OS: WIN 07

  Thank you

  Migas

  Go in Device Manager. Find the battery device. Click the triangle next to the battery to decompress. Left click on the device of the compatible battery Microsoft ACPI control method, then right-click and choose uninstall. Once he uninstalled it can install on its own, but if not only, right-click on any device and select search the hardware changes. The operating system must install a new copy of the device of the compatible battery Microsoft ACPI control method.