Black screen with Win7 and view 4.5

Similar Questions

• DV7-1210eo Black Screen with CPU and graphic Error Codes

  I'm running out of ideas on how repair this laptop so I thought I would ask here. Like so many other people with these portable mine seemed to go right after my warranty expires. I went to power on one day and he presented that a directed graph code error with a black screen. Instead of trying to fix the original slide myself I thought it would be best to just replace it. After the new Board of Directors came and I reassembled it all has been great to work for a few days. I went to power on one morning and he presented the same graphics code error as before. I then reset and tried again, but this time that he gave me the CPU error instead, after 15 seconds or later he would begin to switch between error a CPU and graphics. I assumed that the jury who sent was defective, so I sent a replacement. Once the replacement card has been installed it would always give me the same errors, sometimes it would be the graphics and other CPU.

  I was told the jury that I sent worked great and replacement has been tested before it was sent, it even came with the results of the tests to check. I tried to replace the CPU and memory with a work known and same notebook AC adapter, which does not seem to help.

  If anyone has any idea as to what could be the problem I would be acknowledging the entry.

  Thank you

  I want to just update to anyone who seems to have the same problems as me.

  I finally had time to replace the CPU and specifications works fine now. It seems the controller memory on the old CPU came out and was causing memory to not be detected properly and causing graphic errors. Before you spend money on a new motherboard, you may want to consider the processor as the problem.

  Now if only I can figure out how to keep it from cooking itself...

  Thanks for all the help,

  Domo

• Black screen with Google street view

  No problem using IE - 9.
  ALS no problem when firefox is started in mode no economy.
  Excluding all add-ons does not solve the problem.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  See also:

  • https://support.Mozilla.org/KB/reset-Firefox-easily-fix-most-problems

• Vista Home starts with black screen with blinking cursor

  Hi, I have a toshiba satellite with Vista home, he stopped last Sunday, when I turn it on, start it start sbooting normally but then I get a black screen with cursor and is not go further. I tried last good known, tired, safe mode, I have same TOSHIBA recovery disk and does not either, when I boot from the CD, it seems that it is loading files, then the yellow bar on the work screen appears, but then I get the black screen with cursor, nothing after that.

  I took out HD and a Sata drive via the usb port to connect to my HP laptop. I was able to open the F and G, but C drive (where the OS is installed which has changed the letter e) could not open, he told me I need to format it.

  I have the original recovery disk for Toshiba, which works when the hard drive is not in the Toshiba, but when I put the hard drive back, I never the option where it asks me to repair or reinstall all.

  is it possible that I can use my laptop HP after the toshiba drive connected via USB, to repair the toshiba C partition (which is called E)?

  There are more than 2 weeks worth of work that are not backed up, and I wouldn't lose. Help, please.

  Hi MB1969,

  This seems like a hard disk failure. You must get in touch with Toshiba to get help.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

• Windows 7 black screen with the cursor of the mouse in normal mode and safe

  Hi all
  I hope someone can help.
  Laptop downloaded updates and after the restart will only go to a black screen with the mobile mouse cursor.
  This occurs in safe mode, normal mode.
  I tried all variations of safe mode and still the same thing happens.
  Last known configuration does not solve. (i.e. no restoration or image to enter)
  Using the vista win7 dvd upgrade or a linux dvd and screen appears as you expect his obvious system is very good.
  I tried the options on ctrl alt del, ctrl shift esc etc etc, but I cannot go into Control Panel, or a any part of the win7 GUI.
  Best I can do is access via the command-line... any thoughts on how to fix?

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the following steps and check whether the problem is resolved.

  You can disconnect all external devices except the keyboard and mouse and check if you are able to boot to the desktop and check.

  I also recommend what to do the Startup Repair. Follow these steps:

  To perform a Startup Repair follow these steps:

  1. Insert the DVD of Windows 7 and restart the computer.

  2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.

  3. choose your language settings, and then click Next.

  4. click on repair your computer.

  5. Select the operating system you want to repair, and then click Next.

  6. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Access the link below for more information on the Startup Repair:

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/ab43493b-247C-427e-BA21-4950eea279ac

  http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/ for the black screen problem

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Pro black screen with cursor on all modes and no login screen

  OK so basically, it's how, my laptop decided to me-screw right when I need to make some adjustments to my final project for next week.

  Friday he started very well in class and at the end of the course at 6:30, I stopped him. I normally don't that often stopped because I usually find myself opening upward in an hour later. But I did this time and when I got home and turned on around 9:00, it started like this:

  Screen Compaq PhoenixBIOS > Windows boot animation > black screen with cursor mobile, no login screen

  No screen connection. No sound. Not nothing but a black screen and the cursor movement. So I force shutdown and turned it back, this time he asked a chkdsk and I ran it. A ton of stuff file unreadable came and it took all night to run through it all. Tried to start again and Windows Error Recovery came and I tried all Modes of security and start normally and all produce the same black screen and the cursor with no login screen.

  Then I used my Windows 7 dvd repair to try and system restore to a week before. That's where I noticed that windows had installed a critical update at 12:00 on Friday. Tried to restore before that, but he failed. Gave me an error 0 x 80070057 and said I should run chkdsk /r and then try again. Then I used the cmd prompt through dvd repair and he has seen all these things wrong file again once recovered things then realized hours later. Tried to restore the system again. Still the same error. A run chkdsk again through the cmd prompt, then he went to clean without errors or orphaned files or anything, but it took a lot of time. I used the Startup Repair, and he has not found anything wrong either. But still the same error the system restore.

  So I looked around online for the last two days, trying to figure out and that someone said to try CTRL + Alt + Delete, the sticky shift key thing. So I tried to boot the system again, same black screen with cursor movement. I did CTRL + Alt + Delete, nothing. Press and hold the SHIFT key, and a pop-up window asked FilterKeys. Press the SHIFT key 5 times, a popup asked about sticky keys. But that's all I can get it to do. Nothing else. I tried to boot into safe mode with F8, chose, each of them and that changes in screen resolution and the words "safe mode" in all the corners of the screen. If the repair dvd's while I start in safe mode, it will open as well in safe mode, but with the same black background mode. Tried running sfc/scannow through repair invites cmd of the dvd and it says a system repair is pending and he had to restart, and then run the sfc/scannow. Tried, but it doesn't do anything when I restart except go to Windows Error Recovery asking either start in any safe mode or normally. And then it's just black screen again.

  So I am at a complete loss what to do now. After all of this mess, it seems that this Windows Update Friday afternoon did something and when I booted it upward once again, his cause nothing but problems. I think it has something to do with the display and the graphics card drivers? It's as if the thing starts but I do not see anything either because the sticky keys appears, but sees nothing else, no matter what I do. Seriously, I don't want to this junk because this is a new hard drive and I was just able to retrieve my files from my old hard drive that had epic failures as well. And I just got this new specifications I wanted as well.

  Laptop Spec:

  Compaq CQ50-115nr
  OS: Windows 7 Professional
  HARD drive: Western Digital Scorpio Blue 320 GB SATA WD3200BEVT
  Processor: AMD Turion X 2 RM-70
  Graphics card: NVIDIA GeForce 8200 M G
  Memory: 3 GB RAM

  If someone could seriously help me I would be VERY happy.

  Hello

  This isn't good news.

  --------------------

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting

  I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer

  Hello

  (1) you are able to log the desktop computer?

  (2) when exactly you get the black screen?

  (3) you receive an error message on black screen?

  (4) have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the methods below and check if the problem persists.

  Method 1:

  In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 2:

  If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• My Dell Vostro 1310 won't start. I turn it on and the black screen with the Dell logo appears and nothing more

  It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?

  Hello

  If under warranty contact Dell

  http://support.Dell.com/

  or ask in the forums Support of Dell

  http://en.community.Dell.com/support-forums/default.aspx

  If it is under warranty, contact a reputable repairman, local computer

• Black screen, with toolbar frozen and no icons

  original title: black screen, with toolbar frozen and no icons! :(

  Hello

  my laptop (vista) recently has devloped a problem in which the Bureau during its connection, is black with no icons and a toolbar frozen. This PC can hang and will only work in safe mode. However, in safe mode, it is very slow, and yet I can not delete all the files, but I managed to save my personal files.

  There is no current system restores for me to do, and I did the test of material, without known defects.

  I also noticed when his connection, because I did not need to press on enter to type my password, the box is already open :/

  Thanks in advance, I hope someone will have the answer to my problem :)

  Sam my setup is:

  Medion M96350, Intel Core 2 Duo, T520 @1.5 - Ghz, Vista Home Premium

  This also happens if you did a recent update of windows that has corrupted or have recently installed the new drivers on something that is causing a conflict.

  I don't really know a final solution but her below can make the black screen disappear temporarily:

  1-ctrl-alt-del to get to Task Manager
  2. go to the "Applications" tab
  3. a 'new task... ". »
  4 type "explorer.exe".

  If the above get rid of the black screen, it is always likely that she will return when you then start the PC, but at least it can allow you to cancel any installation driver/updates to see if that solve the problem.

• Windows Vista installation disc: Black screen with a cursor and then nothing happens

  A blue screen appears when I try to start Windows and I'm trying to fix the computer through my installation disc I have. But when I try to run my Vista disk installation happening by loading the files fine. It then shows a black screen with a mouse cursor that moves. After that, nothing happens even if I leave it for hours to sit. It is a real disk Installation of Microsoft for Vista.

  If a clean installation of a real Installation of Vista disc does not work, then you probably have some kind of hardware problem (and the blue screen, you got before makes this even more likely).  You can try to do some troubleshooting on your own hardware, but frankly you probably put "t have tools or spare parts to do very much.  Here are some instructions that may help:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.

  If this does not work, then I suggest that you take it to a repair shop of computer with a good reputation for the service where they can troubleshoot, diagnose, identify and possibly repair or replace the problem.  Before you import it in, I suggest that you protect your important data, as it is likely that they will wipe the hard drive clean in the process.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD.  This should hopefully give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, slave the drive to another computer and copy the data in this way.

  I'm sorry, we can not help more, but from your description there is no option of software if you do not have to do a clean install of an Installation of Vista genuine disc.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Defective boot to a black screen with white cursor and DDDP errors.

  I have a Pavilion h8-1020, which began to show a black screen with a cursor flashing after the initial splash screen.

  I ran all the options except a complete reset utility mode.  I downloaded the Dell Diagnostics Deployment Package and booted from it.

  I ran the tests and got these errors

  4 c 00:0522 - system Interrupt controller or device has failed

  These all failed

  4600:021E - SMBIOS unidentified LM78A

  4600:021E - Fan1 SMBIOS

  4600:021E - SMBIOS chip fan 2

  I put an old HD and it starts to boot to the operating system while it recharges.  It is further than he gets with the original drive.

  Any thoughts would be appreciated.

  Thanks, BC.

  It's the Dell forum, so why you post questions on a computer HP here?

  The Dell diagnostics probably will work correctly with the HP hardware so that the results are meaningless.

  Ask your questions on the HP forum...

• my laptop turns on and immediately goes to a black screen with a request for password

  my laptop turns on and immediately goes to a black screen with a blue pop up asking you for a password.

  Getting started doesn't let me go to F2 or F11 or F12.

  THE SCREEN STOPS JUST AFTER 3 ATTEMPTS.

  Help!

  I don't know who installed it but I can't use my computer. (I have teenagers, and no one will admit to it)

  Sounds like someone put a hardware/BIOS password on your computer.  You see the Windows logo?  If this isn't the case, then you must know about this, which has put the password and have them removed.  If we cannot help you.

• Windows 7 Pro 64 bit black screen with the mouse only on startup and nothing else

  Hi there, Windows 7 system recently froze on me when I tried to move a large file on a USB hard drive. I didn't was not able to close the file so I decided to stop my PC with the regular start-> Shut Down.

  Now when I try to turn on my computer, after the "starting Windows" and Microsoft report goes to a pure black screen with just a (mobile) mouse cursor, not keyboard commands or click right work (eg. ctrl + alt + delete does nothing).

  I tried to start in safe mode, safe mode with network, they do the same thing after the "Starting Windows" screen. Tried to boot with my Windows 7 Pro 64-bit installation disk so and entered commissioning repair - no problem. Tried system restore and it went successfully, however after clicking restart is again the same thing!

  It's really making me crazy, could someone please help me? I really want to reinstall Windows and lost my files (since I can't even in a form any Windows Installer interface I'm not able to do a repair).

  Thanks in advance for your suggestions!

  I will proceed to a re - install now, thanks anyway for your efforts