button of RESTART AND OPTIMIZE missing in LR 3.6

Similar Questions

• Restart continues and optimization applications

  Officially updated Android Lollipop 5.1.1 last week.

  Summer in good condition until that I restarted the phone today.

  Now, whenever it is turned on, it optimizes the apps and restarts after optimization is over, without reaching the lockscreen. I'll leave that for three hours, in the hope that it will solve itself, but it stops the restart and optimize several times.

  Must turn off by the button next to the sim card slot.

  Tried to fix it with companion locked up, but it is not detected when connected to the laptop.

  Your help is really appreciated.

  Realization of a repair using PC Companionsoftware. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 80% battery.

  Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

  Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

• XP Start button, the toolbar and IE8 is missing. To start Windows with a xp desk top icons.

  My hard drive has failed, but I had cloned the much smaller former player. I went to the old hard drive and it starts as principal. MS asked for the codes wyhich I put in and it was authenicated, now comes the problem, I restarted the PC and he was fine, then I rebooted, it a time of sedcond to be sure it was working properly before I attenpted to clone on a new hard drive.

  Then the disaster my button start Xp and IE8 toolbar is missing. To start Windows with a xp desk top icons. Can access the Task Manager via ctrl. ALT, delete and sees the C: drive with the etc program files but no users. How can I fix

  Hello

  This problem can occur for the following reasons:

  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.
  • The core files are damaged.
  • The Explorer.exe file does not load at startup.

  Please refer to:

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  Note:

  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  Reference:

  (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Please return to the State of the question.

• I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it?

  Wireless

  I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it? Sorry for the bad English.

  Hi Zeljka Djordjevic,

  ·         What program did you delete?

  I suggest to perform a restore of the system and check if the problem persists.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Where are reduce it and optimize the buttons? And the to-do bar?

  I am so angry and mad at Windows 8 - I hate it! Nothing is simple and straightforward, and it took me days to find even a way to do the most basic things! However, one thing is particularly listen to me and I can't seem to be able to fix all display the taskbar and the reduction and maximize buttons when I'm on the internet!

  I use Google chrome and have managed to customize my search bar and theme etc, but when I'm on a page all it displays is the page. It does not re-sizing options in the corner, no button maximize/minimize, and I can also see the taskbar.
  All very irritating because I have to push the button of windows to access the boot screen, then click back on the desktop to see the bar of tasks or other programs/files I use.
  I don't want to break the screen on one side and go like this - I want to be able to minimize! And see the desktop and the taskbar of blood so I can see the time at least!
  I tried the task bar options to search for this alleged "appear on all screens" setting, but this is no the case to find! It's really annoying me and stupid support system was no help whatsoever! Why is there no number anywhere that I can call? Also, that thing where you put in a number, so they can call you did not work for some reason!
  I'm so sick of this whole system! Sucks seriously!
  Please, please someone help!
  Thank you! :)
  J

  I use Google chrome

  That is NOT a Microsoft product, so I suggest that you ask on the support of Google Chrome forums.

  http://productforums.Google.com/d/Forum/chrome

• Booted XP went into the mode options regurly of open windows, or knowledge last configuration or safe mode. No matter what I choose, keeps restart and return to this page

  Original title: frozen configuration page

  My laptop running windows xp pro was fine, when I went to bed last night, but this morning I woke and went to use the lt and it started as usual but then in a mode options regurly windows open or to last working configuration, or 3 safe mode options. And no matter what I choose, it keeps restart and return to this page and has continually repeated the same steps over and over again... someone can please help me with this?

  It seems that your XP hangs for some reason any...

  Why do we know almost nothing about your system (except a laptop with XP Pro)?  I know this isn't your fault...

  Please answer these questions and to implement the following:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My "Send" button has disappeared and my address list on the left side also disappeared. How to recover these items?

  I've never had a problem sending & or receive e-mail before these days. All of a sudden the Send button has disappeared and my address list on the left side also disappeared.
  I find help that suggests the opening of Scripture and then press F9 to retrieve the list of addresses. The list of addresses returned on the left, but did not appear as he used to say. the length of the screen. What is however now it will be satisfactory. The button 'send' is still missing which is frustrating because I was not able to send emails for about a week now.
  Would appreciate advice on how to recover the above.
  Thank you.

  Open a window of writing.
  Do you have the toolbar of Composition with Send-spelling-Attach, etc?
  Otherwise go to the Menu bar and select display-toolbars and turn it back on.
  If you are also missing the bar of menus with top view, press the alt key to display, and then turn on the missing toolbars.

  If you have some of the bar Composition tools but lack just the Send button, click with the right button on the toolbar and select Customize. Find the button send in the dialog box that opens, and he reglisser in place.

• My Bookmark button has disappeared and I can't find where he was going.

  I recently had to reset Firefox because of some malware and when I started it back up my bookmarks toolbar button is missing and I don't know where he was going. I'll upload a screenshot showing what I mean. On the left is what it looks like now and on the right is what it looks like.

  http://i.imgur.com/AvicYTK.PNG

  You use the default theme?

  • Firefox/tools > Modules > appearance

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Open the Customize and set the toolbar to display items.

  • Firefox '3-bar' menu button > customize
  • If the missing elements are in the palette to customize then drag them back into the window to customize the toolbar
  • If you don't see an article on a toolbar and in the palette to customize, then click on the "Restore default settings" button to restore the default toolbar configuration

  See also:

  • https://support.Mozilla.org/KB/customize-Firefox-controls-buttons-and-toolbars

• HP EliteBook 8560p: can not turn on WiFi: the button is orange, and nothing happens when you press

  Hello

  I have a problem with my wifi. The button always orange and nothing happens when I press on it: no errors, no message, no reaction at all. This is why I can't use WiFi.

  The laptop is a little new: I use only 2 months.

  1. number and product name

  HP EliteBook 8560p
  НР LQ589AW

  2 operating system installed (if applicable)

  Windows 7 Professional 64 bit

  3. error message (if any)

  No error message

  4. all changes made to your system until the problem occurred

  My windows crashed and I got it from archive created a few days ago. Archive includes all data from hard drives, the system has been restored exactly as it was before the accident. I still don't know if this caused the problem (or if the problem occurred after that): it happened a month ago, and I had no WiFi available at the time and only tried to turn it on a few days ago.

  Additional details:

  In device manager wireless card is appearing as functioning normally. In the management of the adapter Wi - Fi is on but says "no connection available. If I run diagnostic tests, he asks me to activate WIFI with a button on my laptop, which I can't do. In Mobility Center, it says "connection Wi - Fi is turned off". Activate the button is gray and impossible to click on.

  I already tried things:

  1. Reinstalled all the HP drivers from original CD.
  2. Card WiFi removed in the windows Device Manager (remove device), restarted windows, installed new drivers for it, rebooted again;
  3. Checked the mobility Center as suggested in one of the threads available on this forum;
  4. Do a hard reset for HP laptop (battery removed, push the button and hold for a minute).

  Thanks for any help!

  Anatoliy.

  I managed to solve the problem...

  Turns out that the problem was (apparently) caused by HP Power Assistant tool shipped with my laptop. Default profile has been showing the gray bluetooth and WiFi, and it was not possible to turn them on. I created a new profile, and even if all the parameters are identical to the default profile, it allows me to turn the BT and WiFi and turn off without any problems. Button is working fine now as well and goes from blue to orange when I press it. Active WiFi and it works.

  I hope this helps.

• opening program minimizes and optimizes all the time

  progam start showing some problem of its own.

  progam was started for the first time after starting the computer indicates a sound problem, windows Explorer minimizes and optimizes all the time until he is arrested. Pls suggest a solution for this type of problem.

   
  1 did you do changes on the computer before the show?
  2. you receive an error message?
  3. what version of operating system you are using on the computer?
  
  Method 1:
  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted
  
  Method 2:
  You can also perform a clean boot and check:
  Windows XP: How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Windows 7 and vista:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
  Method 3:
  You can also try to run a SFC scan, it will scan and try to correct some of the system files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Hello C Johnston,

  Did experience you these issues when streaming video from any other website?
  It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
  You might try to optimize Internet Explorer to see if it helps at all:
  http://support.Microsoft.com/kb/936213

• Update Windows stuck in a loop. Keeps trying to download page 3 of 3, but never does, then restarts and is trying to download. Can't seem to put an end to the loop.

  Update Windows stuck in a loop. Keeps trying to download page 3 of 3, but never does, then restarts and is trying to download. Can't stop the loop to try something else.

  The operating system is Windows Vista.

  I found this as a solution and to share it here, I still have questions, but thinking might help someone.

  Windows Vista and 7 update Reboot Loop Fix

  Symptom: You have a update that is causing Windows Vista or Windows 7, stuck in an infinite loop. The problem usually manifests as a "step 3 of 3:0 % complete...". "followed by a restart which starts at the exact same message, not allowing you to get on your account of connection or a desktop at all. It's a pain, and he doesn't stop, even in Mode without failure or advanced trying last good known Configuration in the start menu.

  Here is the short version for people who know how to get to tools to do this and if run System Restore from the installation DVD does not work: DELETE files

  \Windows\WinSxS\cleanup.XML AND (as applicable)
  

  \Windows\WinSxS\pending.XML and the infinite loop update will be set.

  There are two ways to get the files, you need to delete. The easiest is to start your installation of Windows and the button 'Install now' DVD, click on the link located at the bottom left that says 'Repair your computer' open a command prompt and type:

  del C:\Windows\WinSxS\cleanup.xml

  del C:\Windows\WinSxS\pending.xml

  The other way is to download a live Linux distribution such as the System of Tritech Service (which, unlike Vista or 7 DVD, can be booted from a USB flash drive for computers with no CD/DVD drive such as netbooks), open a command prompt, mount the file system and deleting the files. Assuming that your Windows installation is the first partition on the first hard disk, the following commands in rxvt or a console in the Tritech Service system should work:

  Mount.NTFS - 3 g/dev/sda1/mnt/sda1

  RM /mnt/sda1/Windows/*/cleanup.xml /mnt/sda1/Windows/*/pending.xml

  umount/mnt/sda1

  discount to zero f

  Anyway you do it, this solution will stop the engine update loop reboot and let you return to your computer. You may need to make some corrections, additional or manual updates if you have problems, but unless your login screen and/or the Office should be accessible! Is a very annoying problem and I noticed that Google is looking for things like "stage of vista 3 3 restart" usually only provides information about how to run the system on a Vista DVD restore. Unfortunately, if there is a problem with an update, sometimes the system restore does not work and fail with obscure errors, so this info is vital.

  Maybe it's your last chance to avoid giving to the top and reinstalling Windows, and we always like avoiding relocations!

• Photo folder "Windows explorer has encountered a problem and needs to restart" and I cannot access any of my photos.

  Windows Vista and, recently, I scanned a few photos and now my pictures folder won't open and gives me an error "Windows explorer has encountered a problem and needs to restart" and I can't access any of my photos.

  Hi LuiMTX,
  

  This problem is only limited to the pictures folder?

  Method 1: Let flow the fixit available in the link below and then check

  Windows Photo and slideshow problems
  http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag/en-us?EntryPoint=lightbox

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the File System Check
  ER tool to troubleshoot system missing or corrupt files on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• After computer restart installed new missing programe.

  This problem causes my computer to run slowly when declaring it & close window. I installed the new software program on my computer and all software installed successfully programe have to restart the computer to run the program. But recently when I installed the new program after I restart my computer the missing program. When I click on the icon of the software on the desktop it ejects a box saying lack of icon and all of the program forced me to uninstall and reinstall it again to use it.

  Can I know how to fix this problem? Sorry for the bad English. Will be grateful if someone could help it.

  Thank you.

  Hi Nic6,

  You can first try to navigate to the folder C:\Program files and access the application and check that you are able to find the program and you can start from there. Sometimes, the shortcut to the file on the desktop may be corrupted.

  Since we do not know how the program has gone or how it was deleted, I suggest that you try to perform a system restore to the date where you were able to access the program and check to see if that help.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how to restore the configuration of the operating system to a previous point in time in Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the steps above do not help, you may need to reinstall the program to your computer.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.