C410a in paper

Similar Questions

• I have a paper jam and can't get the paper to fax Photosmart C410a AIO

  I followed the instructions but torn paper is always presented in the printer and I can't reach it.

  Hi oldlady2

  Please follow this video to remove the paper jam in your printer.

• Black text cartridge problem C410a - no or almost no printing ink on paper

  I have a C410a and simply put in cartridges new (all). When I print a test page within the HP Solutions software since the test page is perfect. When I print a test page for the only visible bit Windows printer properties is the 4-color logo in the upper corner. When I print from MS Word I get only the text in color, no black text. If I change the color of the text to do anything otherwise black, printing using color fine ink cartridges.

  I tried to change to normal Fast project at best in print quality settings. There is no visible text either in fast draft mode. In Normal mode, there are barely visible black text. In best mode it is faded black text.

  I went through the steps on the HP site problems, and this has done nothing to solve the problem. I cleaned the contacts on the head, still no help.

  After I put the cartridges again the black text cartridge to print a few pages and they were fine, then all of a sudden, there was nothing of this cartridge. The old previous cartridge was the same way - sometimes it print and sometimes it does not. Without rhyme or reason, just feel random and print do not.

  Is there a way to check if there is something blocking the ink to come out of the cartridge or through the cartridge holder (or whatever we call it)?

  There is a document with measures to try to follow located here.

  If you have already completed the steps in the document, then most likely you are to the "eight Solution: replace the print head." If this is the case, then we have two options here. The first thing I would do is determine the status of the guarantee to the printer using the HP product warranty verification tool.

  If the printer is under warranty, then I would contact HP Technical Support on this printer.

  If the printer is out of warranty, so we have two options. You can order the print head with product number CN642a HP parts store online. You can look into making a print head soak. The information for this in the thread located here.

  I hope this helps.

• Cannot copy from the surface of the glass. HP Photosmart Premium Fax all-in-One, model # C410a

  Hi people,

  I can't make a copy of the surface of the glass of the printer. Automatic advance works great, time to take the paper and print a copy. In the past, printing from glass was not a problem. The error message on the printer says "Document Feeder Jam. Reload document, then restart of work. " The problem is that there not be jammed. I raised the lid of the printer and checked the ink cartridges, checked the paper tray and open the access to the rear of the printer.  I have an HP Photosmart Premium Fax all-in-One, model # C410a. All accepted ideas. Right now, I'm ready to start with a hammer.

  Oops, I got typo in my link.  I have the fix above or you can click here.

• HP Photosmart C410a won't copy

  The machine will not copy. It prints from the computer, it scans and prints. It has a new HP ink cartridges. A blank page is anything out. It will copy the plate glass of the feeder is not.

  Hey @mikedn49,

  Welcome to the Forums of HP Support!
  
  I would like to help you with the resolution of the problem of copy of blank page that you are having with your HP Photosmart Premium Fax e-all-in-one printer - C410a today. One thing I have to admit, however, is that it is extremely odd that you would be able to scan, as you said in your original post. The copy mechanism is the same for scanning. Therefore, if there is a defect in your bulb copy, scan would not be. Because you specify that your product is able to scan very well, I think actually that you can experience a no black print quality issue. When you print from your computer the printer uses ink color to enrich black. However, when you copy and choose the option to copy black product strictly use black ink. If you have a fault with your black ink, then the copy would come out blank. To find out exactly what the problem is can have you run the steps below.

  Step 1: Start a color copy:

  1. Load a sheet on the flat or the automatic document feeder on your product with something in color on the page
  2. Press the copy button
  3. Choose the color copy

  If the copy of color print out as well in white (it would be very weird that the digitization of works very well) but I have to make you spend thereafter paper Support HP:

  Vertical stripes, lines or streaks on Copies, faxes or scan

  If the copy of color prints with the image on it, then copy/scan function is very well and your question is actually a black print cartridge problem.

  To fix the issue of the cartridge black print Please run through the following steps:

  Problems with print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  Please reply to this message with the result of the color copy, test and whether or not, the troubleshooting steps, I have provided you with a problem. Good luck!

• Photosmart C410a won't print duplex from my Mac laptop

  Just bought a C410a and installed. It can reach all my computers, but when the computer Mac laptop, I can't make changes to the configuration of the printer. I am presented with an only fundamental choices like "last use", "photo paper", "... fast project", etc.. When I print from my desktop Mac, I can change all the features such as color, the orientation of the paper, double-sided, etc.

  I tried to use the HP utility to change the settings of the printer, but nothing of what I need to change are listed.

  However, when I use my PC (windows XP), I can see everything about the printer and have full control.

  Anyone know what is happening here?

  Thank you.

  OK, when you start a print job (file > print or cmd - P), on the resulting window to ensure that the arrow next to the name of the printer is oriented upward.  If this is not the case, click it.

  Now, in the drop-down, choose paper Type/quality.

• HP Photosmart Premium C410b: printing using panoramic photo paper

  Hello

  Is anyone able to tell me how to print using A4 panoramic photo size.

  Thank you

  Hi @Silverback2,

  Welcome to the Forums of HP Support!

  I understand that you are curious how to print on A4 panoramic photo on your HP Photosmart Premium C410b printer paper. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem.

  Your printer is not designed to print on that size of paper. If you want to print on the paper, I think that a DesignJet is better suited for these types of photos.

  Specifications of printer for HP Photosmart Premium Fax all-in-One printers (C410a C410b, C410c, C410d, C410e)

  .

  Sizes and types of paper

  Paper

• On photosmart C410a default print settings

  I want to put the default value of the print on a black PhotoSmart C410a only settings. How can I do this?

  OK, when you start a print job in the window that appears before you print, make sure that the arrow next to the name of the printer is oriented upward.  If this is not the case, click it.

  Now, in the Presets Select plain paper, Fast Draft, black and white.  This will 'stick' until the next time that you choose.

  If you're wondering how to disable completely the use of color ink, it's a totally different subject...

• HP Photosmart Premium C410a: leading edge margin problem

  The leading edge of each document prints a quarter inch less margin than it should. Have tried many things without success. Apparently, something slipped a quarter inch into the additional paper tray, but I have no idea what. It's one great printer in all other respects.

  Hey @sandlapper,

  Thanks for posting in the HP Support Forum,

  I understand that you have a print quality problem when you use your HP Photosmart Premium Fax e-all-in-one printer - C410a.  I would like to work with you on this.  I have a few suggestions that may improve the quality of your print.

  I recommend you to make a copy of the front of the printer in order to isolate the issue further. If you have the same problem when copying, then likely the issue-oriented material.  If so, click here and try the solutions that apply to your installation.

  If your printer has a decent copy less error of margin is probably the printing problem you see is related software. In this case, try the following:

  1. Uninstall the printer - click here for instructions.
  2. Fix permissions of the disc on your Mac - click here for instructions.
  3. Once you have finished running the utility above, restart your computer.
  4. Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

  * edited for grammer

• New printer hp photosmart c410a all-in-one

  I use the new printer hp photosmart c410a all-in-one and have a paper jam in the printer.

  Need help I can not easily see the paper blocked under the trays.

  Thank you!

  Hello

  Below the document should help you remove the paper jam:

  http://support.HP.com/us-en/document/c02110413

  Hope the information provided will help you!

• Brand new Photosmart C410A duplexer jams to each double-sided printing

  I got a brand new HP Photosmart Premium Fax e-All-in-One Printer-C410a Monday. Today is Wednesday, and I have yet to print a two-sided copy successfully. It will print the first side of a page, pull the paper in the duplex unit, display clear paper jam then press O message, and I'll open the duplexer and remove the paper

  Recto pages seem to print very well, but this product every time I try to print double-sided copies - the duplexer has not worked once.

  The jammed paper that I am deleting is not torn or badly crumpled, and since he's out of the box for three days now, I can't believe he would already need cleaning. Is there something obvious that I'm missing, or do I just to cart this thing at the store?

  (It doesn't seem to be relevant to this problem, but the printer connected via USB to an iMac running the latest update of Lion. I upgraded to good Lion before purchasing this printer, so the only drivers I have are the ones downloaded via Apple Software Update.)

  Follow the instructions in cleaning here:

  http://support.HP.com/us-en/document/c02110413

  seems to have solved my problem, at least for now. I'm not clear on why a brand new printer, charge-out-of-the-box if need cleaning to work properly, but if that's all it took, at least, it's a good solution cheap and fairly easy.

• Sierra of MacOS e con paper Apple Watch

  Ho aggiornato just he mio MacBook Air 13 "a Sierra of MacOS. HO a Apple Watch 42mm aggiornato con block watch OS 3, con codice. ID active con paper one 2 fattori. Quando provo a lo del Mac paper switch con Apple Watch, dopo aver submitted by Pwd Amministratore, he sistema e rilascia very di error che non riesce a stupid communication Apple Watch e non attiva the fruit. Of course it tutto lo faccio indossando Orologio acceso e sbloccato.

  Chi mi aiuta a risolvere he problema? Grazie

  Ho lo stesso problema pure io. MacBook Air 11 '' end 2015 con Sierra da sta mattina, aggiornato watch a WatchOs3 ho impostato lo con paper 2 fattori my quando vado ad set lo con paper watch, remains in attesa by tempo lunghissimo ed alla fine esce very di error ' non riesce a stupid communication Apple Watch "come one you.

  Speriamo if possa risolvere!

• Default size of paper in the print preview

  Mode legal print preview, I changed the format of paper and now it is the default value. How can I get the default back to letter format and keep so I don't have to change each time I print? Here also the predefined default settings for ink black & white - what should I do?

  You should be able to reset it in the print window, and then select Save current settings as preset.

• Pages: Print flyer A5 on A4 paper

  I have created a flyer A5 using pages and you now want to print.

  Because I used images completely to the edge of the flyer I want to print the flyer in the center of a piece of A4 so I can then cut the paper too far.

  However, whenever I print, it automatically the page towards the top left of the printed sheet, which means that to lose some of the images of the unprintable.

  In addition, it will not print a hairline (despite the option!).

  Thank you

  Simon

  Do what is obvious: build your design in the center of a sheet of A4 with marks crop at the corners so that you know where to cut.

  "Hairline" is not a dimension so don't use it. It depends on the resolution of your printer. Specify 0.25pt rule or test for what is achievable on your printer.

  Also, be sure to use 100% black if you want a solid line, your color is probably a combination of RGB or CMYK coming out as a reason for blurred or nonexistent halftone on something too narrow to reproduce.

  Peter

• paper size for setting

  I try to print my reading list for a case.  What is the paper size in the page layout?

  I would use a model of the Avery collection. You should be able to find their online model number and then you can get the dimensions it. It is the easiest.