C4480 all-in-one printer

Similar Questions

• Why my HP Photosmart C4480 all-in-One printing after I removed a paper jam not?

  When printing, I added paper into the tray paper, and the rollers grabbed the entire stack of paper. The printer has stopped, noting "paper jam". I removed the stack of paper in the printer, and now it won't print at all.  (HP Photosmart C4480 all-in-One)

  Thanks for all the useful things try, but without apparent reason, the printer started working again.

• Message or incompatible cartridges on HP Photosmart C4480 all-in-One Printer

  I changed my color ink cartridge (a 75XL) on Monday, 16/04/12, and everything printed fine Monday.  I turned off my HP Pavilion laptop and printer on Monday night.  Tuesday, 04/17/12, I started working on my laptop and when I tried to print the small printer screen says "not compatible ink cartridges and my laptop screen said" the next cartridge has a problem: black ink cartridge '.»  I had kept the black in (a 74XL) cartridge because he still has a lot of black ink in it.  I removed the color and black cartridges, made sure that the point of contact with the printer is clean, so that both cartridges have ink in them and they are placed in the correct locations (black on the right) and the cartridge color left.  I don't know why I get these messages and why the printer does not print when he did print Monday after changing the color cartridge.  The two ink cartridges are XL, but they are not identical. The black ink cartridge is more horizontally (fate of the stick to the door of printer cartridge) further than the color ink cartridge.  The two are the same vertically / height.  Both cartridges are the type "XL".  I tried to download and use the diagnostic tool and it has led to tell on the screen of my laptop there is no problem with the printer.  Can an HP agent contact me and help solve this mystery.  It's very frustrating because I only use HP products (including two ink cartridges); and if I had to buy new cartridges, how do I know that this problem is happening?  Help please!  My email is [removed personal information] Thank you.

  Hello

  Please see the following link for t\s on this issue.

  http://support.HP.com/us-en/document/c01442936

  If the t\s has been completed restore printing to its default settings, remove the cartridges from the printer.

  Steps to follow:

  • Start button / stop + Combo Cancel button
  • Enter the combination of special keys 1 [Scan] 3 [color copy] 2 [Black copy]
  • "Support menu" will be displayed
  • Press 2 [Black copy] until the display shows "Reset Menu".
  • Press the 3 [color copy]
  • Press 2 [Black copy] until the display shows "semi-Full reset".
  • Press the 3 [color copy]
  • The printer shuts off and turn on by itself, else wait for 20 seconds and power on the printer

  Note:

  All user settings will be restored.

• HP C4480 All in One Printer: HP for Windows 10 Solution Center

  Hello

  I have upgraded from Windows Vista to Windows 10 and was previously dependent on the "Solution Center" for my scan. Is there a software to load the solution on a Windows 10 laptop Center

  Hello

  Connect the printer to your laptop and follow the tool below:

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  It will identify and download the latest version of the Full Feature HP software for your printer, including the HP Solution Center.

  Note: don't forget to run "Check for updates" and make sure that KB3133431 is installed, it solves a problem that affects the HP Solution Center and prevents the launch of the software.

  Kind regards

  Shlomi

• HP Photosmart C4480 all-in-one printer. Message "Incompatible cartridge". New 75 HP cartridge inst

  It was for a while, then recently started printing with the message "Incompatible cartridge".  I followed the instructions how to clean cartridge, still with the message "Incompatible cartridge".  Help!

  HI - at this point, replacement of the cartridge would be the next step.  I hope it solved for you!

• HP Photosmart C4480 all-in-One gives the HP Solution Center error

  Hello

  I have a HP Photosmart C4480 all-in-One printer. I also have a laptop HP Compaq Presario CQ60 with Vista.  These two are under the age of one year.

  I just used the ink contained in the supplied start with my printer ink cartridges, so I replaced the. The problem that I was going on even before I replaced the cartridges.

  When I run the HP Solution Center, it says at the top:

  "HP Photosmart series C4400

  Disconnected! »

  When I click on the Toolbox, it gives me an error will appear: "the computer is unable to establish two-way communication with the device.

  Well, it is certainly connected and it prints, copies and scans very well.  I'm used to be able to check on my ink level. Now, the solution Center think my printer is not yet connected.

  Any ideas?

  Thank you!

  HP Envy m7 running Windows 10.

  Simply click on the star

  Thank you

• HP Photosmart C4480 all-in-One takes forever to print

  HP Pavilion dv6-6061eo laptop

  Serial number [personal information deleted]

  Prod, number: LQ769EA #UUW

  Printer: HP Photosmart C4480 all-in-One connected USB

  Operating system: Windows 7 - all updates - updates of August incl. -ETH on

  Troubleshooting done - but all the reports in the order

  My Tech expertise is intermediate.

  No new software has been installed

  Laptop has worked without problem with a printer HP Photosmart C4580 in Scandinavia, but after my return to France where I use a HP Photosmart C4480 takes forever to print even a single page.

  Hello

  Curiously, the problem has now been resolved by changing the ink cartridges HP with a new set of HP ink cartridges.

• HP All in One printer will communicate with the computer.

  Original title: HP PHOTOSMART ALL IN ONE PRINTER C4480

  MY COMPUTOR KEEPS TELLING ME IT IS THERE HAS NO COMMUNICATION WITH MY PRINTER, I TRIED TO DOWNLOAD AND INSTALL FROM THE NETWORK DRIVER INSTRUCTIONS TO FIX THIS PROBLEM WITH NO NO SUCSESS I SHOULD THROW THIS PRINTER AND BUY ANOTHER

  Hello

  ·        What operating system is installed on your computer?

  ·        What is the exact error message that you receive?

  I suggest that you follow the steps in the link and check if that helps:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also check: http://h30434.www3.hp.com/t5/Other-printing-questions/HP-Photosmart-C4480-All-in-One-gives-error-from-HP-Solution/td-p/105711

  Printing problems? Try the HP Print Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&DLC=en&LC=en&product=3418705

• Impossible to analyze using Photosmart C4480 all-in-One

  I use the Photosmart C4480 all-in-One on a Mac, 10.6.8.  Impression always worked without problem but digitization has never worked.  Today, I realized that the software provided with the printer is by OS 10.5 (HP Scan Pro always gave me an 'unknown error' popup).  I downloaded version 10.6 on the HP site and installed on the old software.  I opened the new HP Scan, select a profile and press Scan and the program froze and I had to force quit.  I tried several times and it kept happening.  The all-in-one has a screen where you can scan a computer to the unit, and I tried that as well.  The program "Open in Preview" open on my computer, and the screen on the all-in-one read "Scanning" for a short time but then returned to the menu analyze.  Nothing happened on my computer or the scanner.  I decided to uninstall all the HP software and reinstall version 10.6, where crushing the 10.5 version had caused these problems, but after doing so I got the same results scanning HP and analysis on the all-in-one.  Thanks a bunch if you can help!

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Finally, download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• I have a photosmart C4480 all-in-one who needs a new cord.

  My photosmart C4480 all-in-one needs a new cord as the current no longer matches the printer tight enough.  I have to hold the cord in the right position in order to print anything at all.  How can I get a new power cord?

  Do you need a power cord or the power module?  The cord is a standard element that can be found in any computer or Radio Shack.  The module is part number 0957-2231 as appearing on the HP Site's Partsurfer.

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• HP Officejet 7310xi all in one: printer keeps repeating transport jam

  My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

• HP 5740 all-in-one: print HP 5740 Air has stopped working

  Well worked for 8 weeks, now when I try to print a page of reception or what ever, it shows all the print pages option, shows the name of the printer, but nothing happens to the printer if I ping the printer, it will not receive all the packs to date, the router receives all packets, I printed out the Page of Configuration of HP network , it showseverything turned on and connected.

  Hey @jmichaelmcf,

  I see you have some problems with your Mac OSX 10.11 machine printing to your Officejet 5740 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is connected directly to a wall outlet, not a surge protector. Once done:

  1. Turn off the printer and the Mac.
  2. While the devices are turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer and the Mac.
  4. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  5. Hold down the CTRL key and click the icon of your printer on the left.
  6. Click on reset printing system.
  7. Click on the button "+" at the bottom left.
  8. In the window that appears, select your printer in the list.
  9. Click in the box next to and select your printer from the list.

  Please let me know the results of the rest of the foregoing. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• HP Envy 4500 All in one Printer

  Hello, I have a HP Envy 4500 all in one printer that is only a year and have had many problems with.  Recently, when I turn it on, it displays an error code; 0XB3F4F4F8. I have not found what means this error code. ? I tried to unplug and then turn on to get the Welcome screen, then it said error code and does NOT stop automatically. I have to unplug it to stop it. Any help would be greatly appreciated!

  Hi!, jenwad87:

  Refer to the HP printer... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/document/c00489814

  Please, contact with the help of HP, of... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876/troubleshooting