Cannot ping outside my local network

I have a computer, I'm trying hard; It runs Windows XP Professional.  I can't access the Internet from this computer; only local resources.  I ping the LAN behind my router, and other computers on the local network have no problems of access to the Internet.  I can ping the local computers and my router from this computer by IP address or name, I can ping and the local host (127.0.0.1).  She receives a valid IP address of the router, which works as a DHCP and DNS server seems to work.  I tried to change the DNS servers in the TCP/IP configuration to use OpenDNS, just in case there was a problem with my ISP, but given that the other computers on my local network were not seen the question, I don't have to understand that it would make a difference.  It did not help.  I tried to disable the firewall in the case who was blocking Internet Explorer or another browser to work.  I tried ipconfig/flushdns, released and renewed the IP address, the only thing that I is not done yet is netsh commands to rebuild the TCP/IP stack, but since I can ping, I don't think that is the question.  I ran Malwarebytes and an updated version of AVG anti-virus, who both turned up nothing.  I can not get the system restore to restore a date known working restore, it fails, there is nothing in the startup that seems suspicious, there is nothing pointing to a proxy server redirecting traffic, and I'm out of ideas.  Anyone think of something that I missed?

Hello

Ping is a level more low action Network.

Try to install the drivers of old that you can find and do a complete refresh.

WinSock and TCP/IP update.

Type Cmd in the search text box.

Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

Type netsh winsock reset at the command prompt and press the Enter key.

The same processes to refresh the TCP/IP replaces the command typed with.

netsh int ip reset press enter

ipconfig/flushdns, press enter

Restart your computer.

PS Si the IP address starts with 169.xxx.xxx.xxx is not a valid IP address.

Tags: Windows

Similar Questions

  • WRT1900AC of external storage outside the Local network

    I'm trying to set up my WRT1900AC router to access a USB attached as an external storage device. I can access the drive when I'm on the LAN, but I had no success accessing outside my local network. I enabled the FTP option in the section of external storage. With the FTP option is enabled, it then points me to the IP address that my cable modem ISP attributed to the router (192.168.0.2). Obviously this won't work from the outside world because it is not the IPV6 address. I install my modem cable to the port before 21-the 192.168.0.2 address and tried to access from outside by using my address IPV6 (ftp://77.XX.XXX.XX:21) but it will not connect. I was hoping someone could point me in the right direction, as I obviously don't do something here.

    Hello, Steve99888. You must configure the settings of folder first. Check out this link.

  • 5 view customer disconnects immediately outside the local network

    I work with the 60 day trial of view 5.0 5.0 w/ESXi. Everything is configured and works well inside the LAN, but we have not been able to connect outside the local network. We have a single sign-on server that is associated with a single security server. All the rules of firewall, file server and configuration procedures correspond to installation and administration guides. Try to connect via PCoIP from a variety of devices.

    The client connects, check credentials, allows you to choose a desktop, opens the window of the office, but him freezes and shut up saying: 'the connection to the remote computer is complete.' This happens every time.

    Anny suggestions?

    Hello

    First of all, are you just a black screen that stays there for about 30 seconds then it closes with error? It is usually a problem with the connection to PCOIP. Could be firewall rules blocking a port, it could be the NATs. Security servers can be hard enough for the Setup program.

    First check and see if you can connect by using the view client and RDP Protocol. Also, make sure that through the firewall, the Security Server can access the VLAN Office on tcp/udp 4172. Search for NATing in the external firewall and that your security server for installation of the connection to the server has the external IP address that there are listed (not the internal IP of the server security).

    If you have a team network to talk to them and see if they can track packages. Look at the logs on the server and Security Office.

    You don't have to worry about this error. Security Server does not need to be on the field, in fact it should not really be on the field. It somewhat defeats the purpose of having a security server. The client has authenticated the username and the password and is spent on the desktop then ok. If the Office is unable to connect the user for a reason, then they will be left on the desktop windows request a user name and a pass.

    Hope this helps

    Phil

  • ASA 5505 VPN remote cannot access with my local network

    Hello guys, I have a problem with my asa 5505 remote VPN access to the local network, the VPn connection works well and connected, but the problem is that I can't reach my inside connection network of 192.168.30.x, here's my setup, please can you help me

    ASA Version 8.2 (1)

    !

    !

    interface Vlan1

    nameif inside

    security-level 100

    192.168.30.1 IP address 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP 155.155.155.10 255.255.255.0

    !

    interface Vlan5

    No nameif

    no level of security

    no ip address

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    passive FTP mode

    inside_nat0_outbound list of allowed ip extended access any 192.168.100.0 255.255.255.240

    pager lines 24

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    IP local pool vpn-pool 192.168.100.1 - 192.168.100.10 mask 255.255.255.0

    ICMP unreachable rate-limit 1 burst-size 1

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 1 0.0.0.0 0.0.0.0

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-registration DfltAccessPolicy

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    dhcpd outside auto_config

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    Mull strategy of Group internal

    attributes of the Group mull strategy

    Protocol-tunnel-VPN IPSec

    username privilege 0 encrypted password eKJj9owsQwAIk6Cw xxx

    VPN-group-policy Mull

    type mull tunnel-group remote access

    tunnel-group mull General attributes

    address vpn-pool pool

    Group Policy - by default-mull

    Mull group tunnel ipsec-attributes

    pre-shared-key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    !

    global service-policy global_policy

    context of prompt hostname

    Yes, you will need to either configure split tunnel so that internet traffic goes out through your local Internet service provider, GOLD / directed by configuration current you are tunneling all traffic (internet traffic Inc.) to the ASA, then you will need to create NAT for internet traffic.

    To set up a tunnel from split:

    split-acl access-list allowed 192.168.30.0 255.255.255.0

    attributes of the Group mull strategy

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value split-acl

    I hope this helps.

  • cannot connect to the local network using windows 7

    Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

    Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

    Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel connection to the Local network adapter * 9:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. :

    State media: media disconnected

    The connection-specific DNS suffix. :

    TEREDO TUNNELING Pseudo-Interface tunnel adapter:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. our field: *

    State media: media disconnected

    The connection-specific DNS suffix. :

    I tried to turn off the firewall and connect without success

    My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

    Any help would be appreciated

    Thank you

    Well Yes! So it was an older version of the bonjour service... thank you Adobe.

    You can find the latest version here:

    http://support.Apple.com/kb/DL999

  • Cannot turn off the Local network

    Message icon and get XP Pro SP3 right click LAN "it is not possible to disable the connection at this time. The connection may be using one or more protocols that do not support plug-and-play, or it may have been initiated by another user or the system account.

    I am the only user and administrator.

    When I di ipconfig/all, I get this:

    Microsoft Windows XP [Version 5.1.2600]
    Copyright (C) 1985-2001 Microsoft Corp.

    C:\Documents and Settings\Administrateur > ipconfig/all

    Windows IP configuration

    Name of the host...: laptop
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.
    ... DNS suffix search list: domain_not_set.invalid
    domain_not_set. Invalid

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. : domain_not_set.invalid
    ... Description: Intel(r) PRO/100 VE Network Connection
    Physical address.... : 00-0F-1F-A1-0C-53
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    ... The IP address: 192.168.1.67
    ... Subnet mask: 255.255.255.0.
    ... Default gateway. : 192.168.1.1.
    DHCP server...: 192.168.1.1.
    DNS servers...: 192.168.1.1.
    184.16.4.22
    Lease obtained...: Tuesday, October 12, 2010 10:18
    End of the lease...: Wednesday, October 13, 2010 10:18

    Ethernet wireless network connection card:

    The connection-specific DNS suffix. : domain_not_set.invalid
    ... Description: Dell Wireless 1350 WLAN Mini-PCI Card
    Physical address.... : 00-90-96-A7-2C-08
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    ... The IP address: 192.168.1.68
    ... Subnet mask: 255.255.255.0.
    ... Default gateway. : 192.168.1.1.
    DHCP server...: 192.168.1.1.
    DNS servers...: 192.168.1.1.
    184.16.4.22
    Lease obtained...: Tuesday, October 12, 2010 10:18:29
    End of the lease...: Wednesday, October 13, 2010 10:18:29

    Hi cciaffone,

    If you can't turn off your connection to the local network by going to the network connections

    Please try to disable it via Device Manager

    go to RUN and type the following command in the RUN: DEVMGMT. MSC

    under network card try turning off your ethernet card.

    hope that helps

  • Cisco ASA 5515 - Anyconnect users can connect to ASA, but cannot ping inside the local IP address

    Hello!

    I have a 5515 ASA with the configuration below. I have configure the ASA as remote access with anyconnect VPN server, now my problem is that I can connect but I can not ping.

    ASA Version 9.1 (1)

    !

    ASA host name

    domain xxx.xx

    names of

    local pool VPN_CLIENT_POOL 192.168.12.1 - 192.168.12.254 255.255.255.0 IP mask

    !

    interface GigabitEthernet0/0

    nameif inside

    security-level 100

    192.168.11.1 IP address 255.255.255.0

    !

    interface GigabitEthernet0/1

    Description Interface_to_VPN

    nameif outside

    security-level 0

    IP 111.222.333.444 255.255.255.240

    !

    interface GigabitEthernet0/2

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/3

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/4

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/5

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface Management0/0

    management only

    nameif management

    security-level 100

    192.168.5.1 IP address 255.255.255.0

    !

    passive FTP mode

    DNS server-group DefaultDNS

    www.ww domain name

    permit same-security-traffic intra-interface

    the object of the LAN network

    subnet 192.168.11.0 255.255.255.0

    LAN description

    network of the SSLVPN_POOL object

    255.255.255.0 subnet 192.168.12.0

    VPN_CLIENT_ACL list standard access allowed 192.168.11.0 255.255.255.0

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    management of MTU 1500

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm - 711.bin

    don't allow no asdm history

    ARP timeout 14400

    no permit-nonconnected arp

    NAT (exterior, Interior) static source SSLVPN_POOL SSLVPN_POOL static destination LAN LAN

    Route outside 0.0.0.0 0.0.0.0 111.222.333.443 1

    Timeout xlate 03:00

    Pat-xlate timeout 0:00:30

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    WebVPN

    list of URLS no

    identity of the user by default-domain LOCAL

    the ssh LOCAL console AAA authentication

    AAA authentication http LOCAL console

    LOCAL AAA authorization exec

    Enable http server

    http 192.168.5.0 255.255.255.0 management

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

    Crypto ipsec pmtu aging infinite - the security association

    Crypto ca trustpoint ASDM_TrustPoint5

    Terminal registration

    E-mail [email protected] / * /

    name of the object CN = ASA

    address-IP 111.222.333.444

    Configure CRL

    Crypto ca trustpoint ASDM_TrustPoint6

    Terminal registration

    domain name full vpn.domain.com

    E-mail [email protected] / * /

    name of the object CN = vpn.domain.com

    address-IP 111.222.333.444

    pair of keys sslvpn

    Configure CRL

    trustpool crypto ca policy

    string encryption ca ASDM_TrustPoint6 certificates

    Telnet timeout 5

    SSH 192.168.11.0 255.255.255.0 inside

    SSH timeout 30

    Console timeout 0

    No ipv6-vpn-addr-assign aaa

    no local ipv6-vpn-addr-assign

    192.168.5.2 management - dhcpd addresses 192.168.5.254

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    SSL-trust outside ASDM_TrustPoint6 point

    WebVPN

    allow outside

    CSD image disk0:/csd_3.5.2008-k9.pkg

    AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1

    AnyConnect enable

    tunnel-group-list activate

    attributes of Group Policy DfltGrpPolicy

    Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client

    internal VPN_CLIENT_POLICY group policy

    VPN_CLIENT_POLICY group policy attributes

    WINS server no

    value of server DNS 192.168.11.198

    VPN - 5 concurrent connections

    VPN-session-timeout 480

    client ssl-VPN-tunnel-Protocol

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list VPN_CLIENT_ACL

    myComp.local value by default-field

    the address value VPN_CLIENT_POOL pools

    WebVPN

    activate AnyConnect ssl dtls

    AnyConnect Dungeon-Installer installed

    AnyConnect ssl keepalive 20

    time to generate a new key 30 AnyConnect ssl

    AnyConnect ssl generate a new method ssl key

    AnyConnect client of dpd-interval 30

    dpd-interval gateway AnyConnect 30

    AnyConnect dtls lzs compression

    AnyConnect modules value vpngina

    value of customization DfltCustomization

    internal IT_POLICY group policy

    IT_POLICY group policy attributes

    WINS server no

    value of server DNS 192.168.11.198

    VPN - connections 3

    VPN-session-timeout 120

    Protocol-tunnel-VPN-client ssl clientless ssl

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list VPN_CLIENT_ACL

    field default value societe.com

    the address value VPN_CLIENT_POOL pools

    WebVPN

    activate AnyConnect ssl dtls

    AnyConnect Dungeon-Installer installed

    AnyConnect ssl keepalive 20

    AnyConnect dtls lzs compression

    value of customization DfltCustomization

    username vpnuser password PA$ encrypted $WORD

    vpnuser username attributes

    VPN-group-policy VPN_CLIENT_POLICY

    type of remote access service

    Username vpnuser2 password PA$ encrypted $W

    username vpnuser2 attributes

    type of remote access service

    username admin password ADMINPA$ $ encrypted privilege 15

    VPN Tunnel-group type remote access

    General-attributes of VPN Tunnel-group

    address VPN_CLIENT_POOL pool

    Group Policy - by default-VPN_CLIENT_POLICY

    VPN Tunnel-group webvpn-attributes

    the aaa authentication certificate

    enable VPN_to_R group-alias

    type tunnel-group IT_PROFILE remote access

    attributes global-tunnel-group IT_PROFILE

    address VPN_CLIENT_POOL pool

    Group Policy - by default-IT_POLICY

    tunnel-group IT_PROFILE webvpn-attributes

    the aaa authentication certificate

    enable IT Group-alias

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    inspect the icmp

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    : end

    Help me please! Thank you!

    Hello

    Please set ACLs to allow ICMP between these two subnets (192.168.11.0 and 192.168.12.0) and check. It should ping. Let me know if it does not work.

    Thank you

    swap

  • Profile of MDM installation fails outside our local network

    I'm trying to register an iPad outside LAN of our Organization. It is connected to the ATT cellular network and is able to see our management profiles very well. He sees our certificates and shows different warnings, I go ahead and press "install". Then I type "confidence". A key is generated. The certificate is registered. In step "install profile", it fails with a message "failed installation of profile" non-descript.

    I check the logs on our MDM server and can see the communication from the iPad.

    Of the server for devicemgrd.log newspaper reported the incoming requests.

    But something that happens after that. And there is no log file indicating what is happening.

    Before I go into the rabbit hole and trace TCP packets on our firewall, is there something simpler to check?

    For example, is there something about our self-signed certificates? Or something else?

    Thanks in advance.

    Have you contacted the supplier MDM?  What's your error logs on the server side? Generally, we have problems to install the profile if the speed of the connection is bad or damaged.

    JD

  • Post updated to SP3 and IE 8, some systems cannot connect to the local network

    A number of machines on my LAN that have recently been fixed to the last State (installed XP SP3, IE 8 and all dry and updated crit) seemed to lose all capacity for networking.

    Device Manager displays all problems, systems were released in market, on a a system restore was performed at a week back but the problem persists. They will not collect a DHCP, our work with a fixed IP address.

    They can only be connected with the local administrator account - domain accounts will not work

    The event log is giving nothing away - very curious!

    I'll try to include measures:

    1 netsh winsock reset (reboot)

    2 netsh int ip reset c:\resetlog.txt (reboot) http://support.microsoft.com/kb/299357/

    3 Uninstall SP3

    I would avoid if possible reconstruction so I welcme possible any other suggestions as to the cause or corrections

    Turned out to be a problem with the site switch - switch reboot solved the problem

  • Cannot access files between local network PC

    I have 2 computers ethernet under XP Home SP3.  They are of type ethernet connected behind a router wireless Airllink 101 a Vista laptop is connected on the wireless (the Vista laptop cannot access files either).  At the same time as I had a third ethernet PC connected without SP and I was able to access his files for at least one of the other PCs.  I tired remove firewalls (temp) and Virus check without success.  In the network section, I can see the computers and shared files on the PC but when I try to open directories is said I can't have permission to use this network resource.  Memory: server to process this command.  Server?  Here is the esentiallly peer computers back-to-back.  I have 50 + GB on each PC.  I believe that this has happened after that I installed SP2 or SP3.

    See the article in the Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution.

  • Cisco router access outside the local network interface

    Hi all!

    I have Cisco router 892 (c890-universalk9 - mz.154 - 3.M4.bin) with firewall area and based on routing strategies.

    Everything works fine, but now I need to have the ability to access external router interface IP LAN addresses.

    For example, I PAT 192.168.4.1 port 8443 to the outside interface IP (93.93.93.2 for example) and I need to check LAN 93.93.93.2:8443.

    ! PAT:

    IP nat inside source static tcp 192.168.4.1 8443 93.93.93.1 - extensible 8443 SDM_RMAP_1 road map

    ! DynNat to the internet:

    IP nat inside source overload map route SDM_RMAP_1 interface GigabitEthernet0

    ! Routing policy

    SDM_RMAP_1 allowed 10 route map
    corresponds to the IP 101
    match interface GigabitEthernet0

    ! ACL 101 for routing policy

    access-list 101 deny ip 192.168.3.0 0.0.0.255 192.168.111.0 0.0.0.255
    access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.192.0 0.0.0.255
    access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.177.0 0.0.0.255
    access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.61.0 0.0.0.255
    access-list 101 deny ip 192.168.3.0 0.0.0.255 172.17.19.0 0.0.0.255
    access-list 101 deny ip 192.168.4.0 0.0.0.255 192.168.111.0 0.0.0.255
    access-list 101 deny ip 192.168.3.0 0.0.0.255 host 172.16.194.100
    access-list 101 deny ip 192.168.3.0 0.0.0.255 10.0.0.0 0.255.255.255
    access-list 101 deny ip 192.168.4.0 0.0.0.255 10.0.0.0 0.255.255.255
    access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.31.255.1
    access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.16.194.100
    access-list 101 permit ip 192.168.3.0 0.0.0.255 any
    access-list 101 permit ip 192.168.4.0 0.0.0.255 any

    ! ACL on the external interface:

    plug-in software component gi0 extended IP access list
    allow an ip
    allow icmp a whole

    ! External interface

    interface GigabitEthernet0
    Description $ETH - WAN$
    IP 93.93.93.1 255.255.255.240
    IP access-group gi0-in in
    NAT outside IP
    IP virtual-reassembly in
    EXTENT of the Member's area network security
    IP tcp adjust-mss 1452
    automatic duplex
    automatic speed
    card crypto SDM_CMAP_2

    ! Inside DMZ interface vlan:

    interface Vlan4
    IP 192.168.4.254 255.255.255.0
    IP nat inside
    IP virtual-reassembly in
    security of the members of the DMZ
    IP tcp adjust-mss 1452

    ! Allow outbound traffic to DMZ to Internet:

    Allow_All_ACL-DMZ extended IP access list
    allow an esp
    permit tcp host 192.168.4.1 host 192.168.111.2 eq 1521
    refuse the 192.168.4.0 ip 0.0.0.255 192.168.111.0 0.0.0.255
    refuse the 192.168.4.0 ip 0.0.0.255 172.17.19.0 0.0.0.255
    allow icmp 192.168.4.0 0.0.0.255 any
    ip licensing 192.168.4.0 0.0.0.255 any

    ! Allow incoming traffic from the Internet to DMZ:

    WAN_DMZ_ACL extended IP access list
    allow tcp any a Workbench
    permit tcp any any eq ftp
    permit tcp any any eq 990
    permit tcp everything any 51000 53000 Beach
    permit tcp any any eq 995
    permit tcp any any eq 465
    permit tcp any any eq www
    permit any any eq 443 tcp
    allow icmp a whole
    allow an esp
    permit any any eq non500-isakmp udp
    host ip 212.98.162.139 permit 192.168.4.0 0.0.0.255
    IP 81.30.80.0 allow 0.0.0.255 any
    IP 192.168.111.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
    IP 172.17.19.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
    host ip 172.16.194.100 permit 192.168.4.0 0.0.0.255
    host ip 172.31.255.1 permit 192.168.4.0 0.0.0.255
    permit ip host 172.31.255.1 172.17.193.100
    refuse an entire ip

    ! Focus on the area of firewall:

    type of class-card inspect entire game DMZ_WAN_CLASS
    match the group-access name DMZ Allow_All_ACL

    type of class-card inspect entire game WAN_DMZ_CLASS
    match the name of group-access WAN_DMZ_ACL

    type of policy-card inspect DMZ_WAN_POLICY
    class type inspect DMZ_WAN_CLASS
    inspect
    class class by default
    drop

    type of policy-card inspect WAN_DMZ_POLICY
    class type inspect WAN_DMZ_CLASS
    inspect
    class class by default
    drop

    the DMZ security


    area WAN security

    Security WAN_DMZ of the pair area source destination WAN DMZ
    type of service-strategy inspect WAN_DMZ_POLICY
    destination of DMZ_WAN source DMZ area pair WAN security
    type of service-strategy inspect DMZ_WAN_POLICY

    Maybe someone can help me to make Cisco to allow ports outside LAN using a NAT?

    I did this on Mikrotik easily = |

    It is due to the fact that they do not allow "hair pinning" by default, once this is configured, it will work.

    Martin

  • Satellite M30-S309: cannot change on the local network adapter device

    Hello

    My name is Sebastian and I have a Satellite M30-S309 I can't configure IT the Connection WiFi.
    The drivers its OK (and reinstall) the LAN, but the WiFi RADIO network ok is OFF, have any opportunity to step ON this Board?

    I reinstall the KEYBOARD shortcut, but I think that the app or utility for the Fn + F8 key and the LED does not.

    Any can help me?
    Thanks in advance,

    S.

    You said the LAN is ok, but are you sure that the wireless network adapter has been installed on this laptop. Please check in the area to network adapters Device Manager.
    If the wireless network adapter has been installed, you should see the wireless network card in this area. As much as I k now the Wlan switch on the front of the laptop works only if the wireless network adapter has been placed.

  • Need help about Remoteapp outside the local network (2008 R2 Std)

    Hello

    We have installed and configured all the 4 services (RDGM, RDLM, RDWA, RemoteApp Manager). Inside the lan, all published remote applications work correctly but

    When accessing the log on credentials wan are invited on several occasions.

    We use a self-signed certificate created by the remote application server. We have installed the certificate in the certification of approved root authorities store.

    Question-is it possible to access remote app on the wan via this free sign certificate or we need to purchase a SSL certificate?

    Thank you

    Laros

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

  • remote VPN and vpn site to site vpn remote users unable to access the local network

    As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

    The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

    ASA Version 8.2 (2)
    !
    host name
    domain kunchevrolet
    activate r8xwsBuKsSP7kABz encrypted password
    r8xwsBuKsSP7kABz encrypted passwd
    names of
    !
    interface Ethernet0/0
    nameif outside
    security-level 0
    PPPoE client vpdn group dataone
    IP address pppoe
    !
    interface Ethernet0/1
    nameif inside
    security-level 50
    IP 192.168.215.2 255.255.255.0
    !
    interface Ethernet0/2
    nameif Internet
    security-level 0
    IP address dhcp setroute
    !
    interface Ethernet0/3
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Management0/0
    Shutdown
    No nameif
    no level of security
    no ip address
    management only
    !
    passive FTP mode
    clock timezone IST 5 30
    DNS server-group DefaultDNS
    domain kunchevrolet
    permit same-security-traffic intra-interface
    object-group network GM-DC-VPN-Gateway
    object-group, net-LAN
    access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
    192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
    tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
    pager lines 24
    Enable logging
    asdm of logging of information
    Outside 1500 MTU
    Within 1500 MTU
    MTU 1500 Internet
    IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
    ICMP unreachable rate-limit 1 burst-size 1
    enable ASDM history
    ARP timeout 14400
    NAT-control
    Global 1 interface (outside)
    NAT (inside) 1 0.0.0.0 0.0.0.0
    Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    the ssh LOCAL console AAA authentication
    AAA authentication LOCAL telnet console
    AAA authentication http LOCAL console
    AAA authentication enable LOCAL console
    LOCAL AAA authentication serial console
    Enable http server
    x.x.x.x 255.255.255.252 out http
    http 192.168.215.0 255.255.255.252 inside
    http 192.168.215.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    Crypto-map dynamic dynmap 65500 transform-set RIGHT
    card crypto 10 VPN ipsec-isakmp dynamic dynmap
    card crypto VPN outside interface
    card crypto 10 ASA-01 set peer 221.135.138.130
    card crypto 10 ASA - 01 the transform-set RIGHT value
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    crypto ISAKMP policy 65535
    preshared authentication
    the Encryption
    sha hash
    Group 2
    lifetime 28800
    Telnet 192.168.215.0 255.255.255.0 inside
    Telnet timeout 5
    SSH 0.0.0.0 0.0.0.0 outdoors
    SSH timeout 5
    Console timeout 0
    management-access inside
    VPDN group dataone request dialout pppoe
    VPDN group dataone localname bb4027654187_scdrid
    VPDN group dataone ppp authentication chap
    VPDN username bb4027654187_scdrid password * local store
    interface for identifying DHCP-client Internet customer
    dhcpd dns 218.248.255.141 218.248.245.1
    !
    dhcpd address 192.168.215.11 - 192.168.215.254 inside
    dhcpd allow inside
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    Des-sha1 encryption SSL
    WebVPN
    allow outside
    tunnel-group-list activate
    internal kun group policy
    kun group policy attributes
    VPN - connections 8
    Protocol-tunnel-VPN IPSec
    Split-tunnel-policy tunnelspecified
    Split-tunnel-network-list value split tunnel
    kunchevrolet value by default-field
    test P4ttSyrm33SV8TYp encrypted password username
    username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
    username kunauto attributes
    Strategy Group-VPN-kun
    Protocol-tunnel-VPN IPSec
    tunnel-group vpngroup type remote access
    tunnel-group vpngroup General attributes
    address pool VPN_Users
    Group Policy - by default-kun
    tunnel-group vpngroup webvpn-attributes
    the vpngroup group alias activation
    vpngroup group tunnel ipsec-attributes
    pre-shared key *.
    type tunnel-group test remote access
    tunnel-group x.x.x.x type ipsec-l2l
    tunnel-group ipsec-attributes x.x.x.x
    pre-shared key *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    Review the ip options
    inspect the netbios
    inspect the rsh
    inspect the rtsp
    inspect the skinny
    inspect esmtp
    inspect sqlnet
    inspect sunrpc
    inspect the tftp
    inspect the sip
    inspect xdmcp
    inspect the icmp
    !
    global service-policy global_policy
    context of prompt hostname
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
    : end
    kunauto #.

    Hello

    Looking at the configuration, there is an access list this nat exemption: -.

    192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

    But it is not applied in the States of nat.

    Send the following command to the nat exemption to apply: -.

    NAT (inside) 0 access-list sheep

    Kind regards

    Dinesh Moudgil

    P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

  • New local VIRTUAL, guest network cannot Ping GW

    It's driving me crazy... Added a new VIRTUAL local network we have done several times. Switches, routers and firewall to see all new VLAN and can ping GW without problem. The host can also ping the nVLAN GW, but guests cannot. However, if I add another guest to the same group of port they can ping each other (as long as they are on the same host), but nothing about the port group can ping the GW. So far, I have:

    -Even once, verified full connectivity to the new VLAN between all physical devices (trunks, etherchannel, etc. are all good)

    -Number checked on the port group VLAN

    -Checked host sees the VLAN

    -Removed and readded vSwitch port group

    -Home charged

    -Removed and readded comments nic (I tried E1000 and VMXNET3)

    -Deleted then recreated the VLAN

    Any other ideas?

    Is the new VIRTUAL local area network in the list of VLANS allowed on physical switch used uplinks ports the vSwitch?

    André

Maybe you are looking for

  • where the bar where I can type in a website to go? His lack at the top?

    Firefox on my old computer was the box with "http / / www. ' where I could type a Web site address and go directly to the site. This isn't on the page of Mozilla Firefox when I bring it to the top. Also on the old computer when I went to the internet

  • Controller SATA on Vista RC1 on Qosmio G20

    I use Vista Beta 2 since it first came out in public and it is almost perfect. Except for some pretty important things. First of all, my mouse pad does not work and I can't get any driver that works with it eighter. But this isn't a big problem since

  • SonyEricsson satio

    How can I get the software for my mobile sonyericsson satio Installed extensions: I do not use one

  • Microsoft 2013

    Hello I have MS 2011 for Mac in my MBA from 2013.  I download Bootcamp to get access to Windows.  Can I download MS 2013 in the Windows Partition and have two suites in my MBA?  Thank you.

  • Corrupt windows installation 7

    I have a windows installation that after updating to SP1 will not start I have to go through the restore process to return to a fully bootable system. Of course, it will not update win7 it not will also upgrade to windows 10. Is it possible to instal