cannot reconnect to my local readers

Similar Questions

• Cannot reconnect the external hard drive

  Cannot reconnect the external hard drive after moving the computer. I have a WD external hard drive and after moving computer cant use. It is used to mount drive f and now in the g drive. He keeps asking me to format the disk before it can be used, but cannot do so. I am desperate to back up my files but can; "t.Any help would be much appreciated

  Hello meatindustries,

  What operating system do we use?

  The answer to this question, we can pursue various troubleshooting methods.

  There are many third-party data recovery utilities available for free online.  You can search for these using your favorite search engine to find one that you like.

  Let us know the operating system you are using and we can go forward from there.

  Best regards

  Matthew_Ha

• Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  When I tried to install my printer, I got an error 1068: the dependency service or group could start. I tried to go into my computer management to enable the print spooler service, but it gave me the same error message each time. What is the dependency service or group and how I put in place?

  Hi SimoneJ,

  Try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Starting from printer spooler services (start-> Run-> services.msc-> printer spooler).

  I hope this helps.

• Want 7640: HP Envy 7640 dropped off the grid and cannot reconnect

  Envy 7640 dropped off the grid and cannot reconnect. I followed the instructions on the previous thread without result - restoring network, cycling settings, router, modem, etc... printer indicates "failure" for the "no filtering". All other wireless devices work fine. Please notify

  Please provide the following information if anyone can help including:

  The printer model - done

  Operating system on the computer (including service pack revision) - done

  Detailed - description of problem including all devices network (extensor, switches)

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Number of brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns? -

  Do you think the printer is going to sleep and can't wake up? -

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router.  Power on the router and wait 3 minutes, power on the printer.  It connects to the router now?  What is the IP address of printers?

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Disconnected ESXi host cannot reconnect to VCenter

  ESXi 4.0.0 Releasebuild-261974

  VCenter 4.0.0 build 162856

  VSphere 4.0.0 build 162856

  I have a host on the 16 who became disconnected from VCenter recently. I spent some time online means to join new host in VCenter, but each has failed so far. I'm not avoiding perform a reboot of the host due to production VMS are residing thereon. Also, I can't access the Web page for the host, which works very well for the other guests, we have running: https://

  I am able to ping both the IP address and the name of FQDN of the host successfully.

  I did the following things in the hope of resolving, who all have failed:

  1 restart the Management Agents on ESXi host from the windows of the customization of the system.

  2. test the management successfully and rebooted network management network

  3A tried to reconnect to the host via VSphere

  4 registered and the Mode of Support Tech executed the following command: /sbin/services.sh restart when I run this command, I notice that the vmware-aam service does not start.

  Error messages:

  1. (in an attempt restore the link) cannot communicate with the specified host. The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  2 (of the newspaper of the Management Agent) panic HttpNfcSvc another process is listning IDE oucederomsurlesecondport 12001; Please ensure that another instantiation of pass run; Cannot initialize the service of httpnfc.

  3. (journal of the VirtualCenter Agent) 0x1499bb90 error 'App' could not discover the ofr is authenticating with host agent version. ; could not resolve version ofr is authenticating with host agent. ; Temporary creation connect spec: localhost:443.

  4. (of the newspaper of the VirtualCenter Agent) 0x1499bb90 error 'App' SSLStreamImp::BIORead (0x2e408bb0) has expired; SSL connection failed with error BIO

  [5 (journal of the VirtualCenter Agent) HttpUtil::ExecuteRequest] error in sending request - SSL Exception: transfer the SSL expired local: 127.0.01:63355 peer: 127.0.0.1:443

  Any suggestions would be greatly appreciated! Let me know if you need to work as well with more information.

  Thank you!

  BOE

  It is an ugly one. At least a restart if not re-install. To minimize downtime, you can close out of virtual machines to the inventory and put them on another host/cluster.

  ___________________

  A +, EASD, MCP, MCSA, MCSE, MCTS, MCITP, MCDBA, NCDA, VCP4

  If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.

• Firefox cannot connect to a local server subdomain if no available network connection.

  Hello

  I have a laptop that is configured as a local server using Apache. On this, I use "localhost" as the domain and have several subdomains.
  Now, if I have no network connection (to any other device) available on this laptop, and then with Firefox I am only able to access the domain 'localhost', but none of the subdomains and get a "Server not found" error on these. If I have a network connection, I can access the domain and subdomains with no problems.

  What it could be and what can I do to make it work without a network connection?
  I also tried with Opera and Chrome, and they can access subdomains anyway.
  Unfortunately however I prefer Firefox, then Yes... I am here.

  Kind regards
  Song

  Troubleshoot you your network connection in the Options menu? Firefox cannot load websites but other browsers may

  If internet not configured correctly, you may have a firewall set in place? http://www.aboutdebian.com/network.htm is what I used as a reference.

• Cannot print on my local printer when you use remote desktop to access the server (Server 2008).

  We are struggling to print on my local printer when you use remote desktop to access the server (Server 2008).  Cannot make it work.  Any suggestions?

  Hi EverettBurton,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• "Window cannot start service on Local computer print spooler. Error 1053: the service is not responding to demand launch or timely control. »

  I was going to print something my Professor downloaded on the school Web site, but after I click Enable editing button, the printer could not print. I mean, I could not find my printer. He went, and when I try to add a printer, it gave me an error message. I tried troubleshooting of the printer, and I got was that the print spooler was not working. I used office.com and tried to restart the print spooler in the services.msc, and he gave me this: "window on computer Local Print Spooler service cannot be started. Error 1053: the service is not responding to demand launch or timely control. "Help, please!

  Hello

  I suggest you try the steps from the following link:

  Spooler printer Forum FAQ:A error was received while trying to use printer
  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/2b618d54-854A-4CFD-84F5-f069aad75a9f/

  Method 2
  I suggest you try the steps from the following link:

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Cannot run the form locally

  Cannot run forms when it is run locally on my machine instead of proceeding CJO race. Cannot display this page on the Web page displayed error message.
  can someone help me with this.

  cool buddy, enjoy and mark this post as correct. This will help others also.

• Cannot reconnect 'missing' photos

  After you have imported all my photos of PS Elements 8, taking the default values, I was presented in the grids of the cell library to the icon broken in the corner upper rh. When running "find her lack of Photos", I got a report saying there are a few 13 678 'missing' photos. I then followed the procedure in a help file to locate missing photos, who described their last visit. However, there is no reconnection done once I've completed this process. Then, I went in PS Elements 8 and searched for one of the names of files that went 'missing '. The result showed two different pictures, in two different locations, but with the same. JPG name. I recognized the two photos as being valid, but you're wondering how to proceed with what seems to be a reason why the rating 'missing', I say that the software cannot deal with dupicate names. I certainly did not expect this 'missing' statement, so a lot of images seems there are a lot of recovery to do, perhaps in the area of renaming one of the images duplicated; for example. filename_1.jpg.

  Did you see this problem, and what would you recommend to fix?

  Thank you very much.

  Fred

  Regarding the upgrade a catalog of items to Lightroom, follow these instructions

  http://TV.Adobe.com/watch/going-from-Photoshop-elements-to-Lightroom/importing-an-elements - catalog in lightroom.

  Please note: If you have imported all the pictures, as you say, then this is not the right way to create a Lightroom Catalog from a catalog of items. The correct method is shown in the video.

  Regarding the missing files, I really don't know what caused them, but I'm 100% sure that they were not caused by duplicate files names, that should not be a problem in organizer or Lightroom. When you say "I then followed the procedure in a help file to locate missing photos, who described their last passage", might be more accurate, exactly what is the procedure, what commands and what did the steps you use?

• Printe all-in-one Deskjet 3520: cannot reconnect my printer all-in-one Deskjet 3520 wireless network

  Hello!

  I'm having a problem to reconnect my printer on the wireless network. I unplugged for a few days and now it won't connect to the wireless network. I get the following message on the small screen on the IP of the printer: not connected SSID:N / A. I hope you can help me solve this problem.

  Best regards

  Mina

  Hi @Mina85 and welcome to the Forums of HP!

  I see that you are having connectivity problems.  I would try to help!

  I recommend you to perform a power reset.   Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also suggest this document on Center of troubleshooting wireless printing.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Cannot reconnect my Smartphone using Bluetooth

  Hello world

  I have connected my Samsung Galaxy android for my Toshiba Satellite (windows 7) via Bluetooth to receive GPS data to use on my graphics path program.

  Easy to do, BUT if I disconnect the device and then try to connect again, BT Stack will not reconnect. While trying to reconnect, there is no request to for passkey and I guess that's maybe part of the problem.

  I installed the last BT V 8 stack, but this does not resolve the issue. Please help before I go crazy.

  Sincere greetings
  Michael Barrett

  Hello

  Have you tried to use the secret key Fn + F8 to disable and then enable the BT after the smartphone has been disconnected?
  Please check this!

• Satelite C50 - B cannot connect to wireless local area network

  My brand new straight out of the box Satelite C50 - B cannot connect to my wireless network, when you are running Windows 8.1.

  When you run the wizard for the first time user, it was unable to connect to my network to register. And I have been unable to connect after starting the OS, even if my thread was visible and the signal strength would be strong. I entered the security network key, but the message came back "unable to connect to this network.

  However, when I started on a USB key to run Linux Mint 17.1, it took less than 5 seconds to connect to my wireless network. If the Toshiba hardware work properly, as also my wireless LAN.

  If I plug in a network cable, same Windows connects to my network and Internet.

  However, given that the C50 - B satellite comes with Windows 8.1 both of wireless capabilities, I was hoping someone here might be able to help me get a wireless connection in Windows.

  It's really strange. I have S50 - B and WLAN works properly. I used my laptop connected to several different networks and everything was OK.
  You can try to test with different wireless LANs?
  Have you checked all the WLAN settings?
  Try restarting your router.

  I mean if your laptop can detect WLAN, this means that the hardware is enabled and working properly. There must be a problem with the WLAN settings.

  Also check the advanced power settings, and then set it to maximum power WLAN.

• Post updated to SP3 and IE 8, some systems cannot connect to the local network

  A number of machines on my LAN that have recently been fixed to the last State (installed XP SP3, IE 8 and all dry and updated crit) seemed to lose all capacity for networking.

  Device Manager displays all problems, systems were released in market, on a a system restore was performed at a week back but the problem persists. They will not collect a DHCP, our work with a fixed IP address.

  They can only be connected with the local administrator account - domain accounts will not work

  The event log is giving nothing away - very curious!

  I'll try to include measures:

  1 netsh winsock reset (reboot)

  2 netsh int ip reset c:\resetlog.txt (reboot) http://support.microsoft.com/kb/299357/

  3 Uninstall SP3

  I would avoid if possible reconstruction so I welcme possible any other suggestions as to the cause or corrections

  Turned out to be a problem with the site switch - switch reboot solved the problem