Cannot start reports Oracle 10 g, Oracle Linux 6.4

Similar Questions

• Cannot run report oracle version 4.5 4.5 less & 6i environment

  Hai...
  
  I need some info & solution if have...
  
  If the related post have already... Please kindly let me know the post.
  
  
  I have a problem of oracle report...
  My machine: Window XP Pro SP3
  
  Form of Oracle Version 4.5
  Form Version: Version Forms [32 bit] 4.5.7.1.6 (Production)
  Report Version: 2.5.5.2.7 reports
  
  Oracle form 6i Version
  Form Version: * form [32 bit] Version 6.0.8.11.3 (Production) *.
  Report Version: * Report Builder 6.0.8.11.3 *.
  
  
  
  When I run my system using which form oracle 4.5. his appeal a report... when I run the report... my blocking of the system... I have to kill the system.
  When I run another system that using oracle 6i, report that runs without any problem.
  
  In my machine, I install the 4.5 & 6i version.
  
  Please guide me... If he got to the need for adjustment to the registry?
  
  Thank you
  Rolland

  I don't remember if exists in forms 4.5 but I think there are (if not using Selector 6i installation House)

  go to programs
  Search for the installation of 4.5 GB oracle_home selector one put as by default the oracle_home of 4.5

  and try again

  and when you are running a version prior to execution of report close the bottom of report engine, they are different...

  Published by: DanielB March 11, 2012 22:57

  Published by: DanielB March 11, 2012 22:58

• Cannot start Instance Oracle

  Hi all
  
  I'm going crazy to bring up my personal database Oracle 11 g 11.2.0.1.0.
  For a silly mistake I didn't renew the sysman password so it became invalid and OEM descended.
  So, I followed a procedure described in this forum in order to change and unblock these users:
  
  1 - update with the new passoword targets.xml file
  < property NAME = "password" VALUE = '< [your encrypted password] >' ENCRYPTED = "FALSE" / >
  
  2 - update with the new file emoms.properties passoword.
  oracle.sysman.eml.mntr.emdRepPwd = [your encrypted password]
  oracle.sysman.eml.mntr.emdRepPwdEncrypted = False
  
  The procedure has not been successful, OEM fell again but yesterday reusing the Pb, I found that it is impossible
  to bring up the oracle. He apparently fails to OPEN it step with this generic message
  
  ORA-03113 end of file on communication channel
  
  
  After tryng to connect with other users:
  
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux error: 2: no such file or directory
  
  And I can't find a piece of more enlightening journal!
  I tried to recreate the spfile from pfile but without result.
  I checked free space of the file system, and it's ok.
  In the last days, I deleted some archivedlogfiles manually, it's a possible reason for the accident?
  
  Thanks in advance for your help, I really give up
  
  Mauro

  user11959162 wrote:
  Hello

  Thank you very much for your help.
  When I was picking up the alert.log file, I saw that I always looked an old alert.log... Thank you for your patience.
  Thus, in the alert.log new I founded... space issues, CARLITO is my instance

  Errors in the /u01/app/oracle/diag/rdbms/carlito/CARLITO/trace/CARLITO_ora_7096.trc file:
  ORA-19809: limit exceeded for file recovery
  ORA-19804: cannot retrieve 43830272 limit 1073741824 bytes disk space
  ARCH: 19809 error creating archive log file to ' / u01/app/oracle/flash_recovery_area/CARLITO/archivelog/2010_06_28/o1_mf_1_38_%u_.arc'
  Errors in the /u01/app/oracle/diag/rdbms/carlito/CARLITO/trace/CARLITO_arc2_7102.trc file:
  ORA-19815: WARNING: 1073741824 bytes db_recovery_file_dest_size is 100.00% used and has 0 bytes remaining available.
  ************************************************************************
  You have choice to free up space in the recovery area:
  1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard
  then consider changing POLICY of DELETE ARCHIVELOG RMAN.
  2 back up files on a tertiary device such as a tape with RMAN
  SAFEGUARDING RECOVERY AREA command.
  3. Add space drive and increase the db_recovery_file_dest_size setting to
  reflect the new space.
  4 remove the unnecessary files using the RMAN DELETE command. If a service
  the system control has been used to remove the files, and then use the RMAN DUPLICATION and
  Commands DELETE has EXPIRED.

  Of course, there are enough physically free space.
  So, I gave more space on pfile "db_recovery_file_dest_size" and then recreated the spfile from pfile.
  But the space problem has not resolved probably because he needed an order of overlap in RMAN
  as in option 4).
  I tried ' RMAN > cuts across all alertlogs ", but it does not simply because it cannot connect to the instance!
  Now I've forced the solution because I put the db in NOARCHIVELOG mode, but I know that it is not practical, so can you advise me in how to use the RMAN commands in these situations (RMAN-06171 not connected to the target database) in which is more useful?

  Thank you for your help

  maurog

  It would be really, really useful if you use the copy and paste it from a command-line instead, if simply describing what you think that you did. 'overlapping alertlogs' is not a valid rman command.

  On the other hand...

  [oracle@vmlnx02 ~]$ rman target /
  
  Recovery Manager: Release 10.2.0.4.0 - Production on Mon Jun 28 15:12:03 2010
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  connected to target database: VORA02 (DBID=2641985033)
  
  RMAN> shutdown immediate;
  
  using target database control file instead of recovery catalog
  database closed
  database dismounted
  Oracle instance shut down
  
  RMAN> startup mount;
  
  connected to target database (not started)
  Oracle instance started
  database mounted
  
  Total System Global Area     285212672 bytes
  
  Fixed Size                     1267068 bytes
  Variable Size                 92277380 bytes
  Database Buffers             188743680 bytes
  Redo Buffers                   2924544 bytes
  
  RMAN> crosscheck archivelog all;
  
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=157 devtype=DISK
  validation succeeded for archived log
  archive log filename=/orafra/VORA02/archivelog/2010_06_27/o1_mf_1_24_62gp94qg_.arc recid=3 stamp=722768372
  validation succeeded for archived log
  archive log filename=/orafra/VORA02/archivelog/2010_06_28/o1_mf_1_25_62l0gn9p_.arc recid=4 stamp=722877076
  Crosschecked 2 objects
  
  RMAN> delete noprompt expired archivelog all;
  
  released channel: ORA_DISK_1
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=157 devtype=DISK
  specification does not match any archive log in the recovery catalog
  
  RMAN> alter database open;
  
  database opened
  
  RMAN> quit
  
  Recovery Manager complete.
  [oracle@vmlnx02 ~]$ exit
  logout
  

• Cannot start the oracle Listener

  Hello, please help me on my Oracle 11 g listener
  
  The system configuration:
  Windows Vista Ultimate 32 bit
  User: sys as sysdba
  Password: *.
  SID: Green
  Host: Greensword
  
  I installed the database Oracle 2 months back this time, tthat it was workiing fine I could connect it and very well.
  But now when I try to connect it says no listener
  
  +++ I tried to do tnsping
  ------------------------------------------------------------------------------------------------------------------
  C:\ > tnsping Green
  
  AMT Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 24-JUL-2
  009 23:49:12
  
  Copyright (c) 1997, 2007, Oracle. All rights reserved.
  
  Use settings files:
  C:\app\WarLock\product\11.1.0\db_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) GreenSword) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = green)))
  AMT-12541: TNS:no listener
  ------------------------------------------------------------------------------------------------------------------
  
  +++ Also check the status of the listener
  ------------------------------------------------------------------------------------------------------------------
  C:\ > lsnrctl status
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on July 24, 2009 23:49
  : 47
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  32-bit Windows error: 2: no such file or directory
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=GreenSword) (PORT = 1521)))
  
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  32-bit Windows error: 61: unknown error
  ------------------------------------------------------------------------------------------------------------------
  
  +++ To save the listener.ora and tnsname.ora content
  ------------------------------------------------------------------------------------------------------------------
  
  listener.ora # Network Configuration file: C:\app\WarLock\product\11.1.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) GreenSword)
  )
  )
  ------------------------------------------------------------------------------------------------------------------
  
  ------------------------------------------------------------------------------------------------------------------
  tnsnames.ora # Network Configuration file: C:\app\WarLock\product\11.1.0\db_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  GREEN =.
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) GreenSword)
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = green)
  )
  )
  ------------------------------------------------------------------------------------------------------------------
  
  
  
  +++ Also when I do netca to configure the TNS on command prompt it gives me
  
  ------------------------------------------------------------------------------------------------------------------
  
  C:\ > netca
  
  IOException: Cannot save NetProperties: C:\app\WarLock\product\11.1.0\db_1\netw
  ork\tools\NetProperties (access is denied)
  
  Oracle Net Services Configuration:
  C:\app\WarLock\product\11.1.0\db_1\network\admin\sqlnet09072512AM0452.bak (access
  s is denied)
  C:\app\WarLock\product\11.1.0\db_1\network\admin\listener09072512AM0452.bak (Acc
  ESS is denied)
  C:\app\WarLock\product\11.1.0\db_1\network\admin\tnsnames09072512AM0452.bak (Acc
  ESS is denied)
  ------------------------------------------------------------------------------------------------------------------
  
  He also do not allow me to start my service TNS of administrative services-> services
  
  ------------------------------------------------------------------------------------------------------------------
  
  Please help me with this * 888

  Microsoft loopback problem?
  The cause is BONE & associated network.

• Cannot start to any Windows media - BIOS, Linux okay.

  Yesterday, on my Windows 7 Pro computer, I tried to access management of the computer via r - clicking on "Computer" and select "Manage", but apparently the link ceased to exist;  However, I could access it via "Administrative tools.". Curious to know how long it lasts, I tried a system restore, that actually do anything, so I tried to restore to the rear.  Is where the real fun begins...

  The bluescreened to computer with the message "PROCESS1_INITIALIZATION_FAILED," SEO Stop: 0x0000006B (0xFFFFFFFFC000007A, 0 x 0000000000000006, 0 x 0000000000000000, 0 x 0000000000000000).
  Now when I try to boot into Windows, I have to make a choice between "Start Windows normally" and "Repair", nor what kind of work.  'Normally' give me the blue screen and "Repair" will not work because my keyboard or mouse will work in a Windows environment.
  I tried different mice, keyboards and plug it into different ports, but absolutely nothing, not even a cursor frozen on the screen.  I also tried a hot spare Win PE with the same result, as well as the Windows installation disc, and various Windows-based bootable USB flash drives - once again, several USB ports.  And Safe Mode is a 'no-go '.
  HOWEVER, everything works perfectly in the UEFI BIOS and all the other screens prior to Windows.  AND I can boot into various Linux distributions installed on an SDHC card that is placed in a USB adapter.
  You are using Linux, I was able to follow the instructions I found on the Microsoft Support, delete the Bootcat.cache file, located in C:\Windows\system32\codeintegrity.  That no longer works.
  Any suggestions before I have turn this into a Linux computer?

  What worked:  I was able to start Linux (Mint distribution has functioned well), and from there I used the Terminal to reformat the drive for ext2, a Linux file system.  I thought that it doesn't really matter what I used, because Windows don't want to reformat anyway; I want to just get rid of all that was to keep the HIDs work.

  Then I started on the installation of W7 disc - believe me, I have never been happy to see a slider! -After all the wanton 'you can do that' messages I finally got things the way Windows he wanted and now W7 is installed, complete with mouse, keyboard and the 'computer' right click 'Manage' option intact.
  I did all the instructions I used to reformat the drive using Linux;  If someone wants to, reply to this message and I'll paste them here.

• (OBIEE11G install) - FAILURE to step 13, cannot start OPMN

  Hello
  I try to install OBIEE 11 G, but I encountered some problems.
  
  I can connect to Oracle Weblogic administration console.
  I can connect to Oracle Fusion Middleware (Business Manager) control.
  
  But, in the list of servers, I had only the server "Admin". The 'BI' server is not present.
  In Enterprise Manager, the 'business intelligence core' application is not started, and I can't start. If I try, I get the following message:
  "SEVERUS: Type of item: PROCESS, the item Id: instance1:coreapplication_obijh1, result of the operation: FAILED_TO_START, the detailed Message: operation failed: start; OracleInstance: instance1; Component: coreapplication_obijh1; MSG: 0 on 1 process started. »
  
  My instance oracle process manager is not started in windows services. When I start it, it becames unstarted automatically later.
  
  
  
  I tried to run one by one:
  \wlserver_10.3\server\bin\startNodeManager.cmd
  \user_projects\domains\bifoundation_domain\bin\startWebLogic.cmd
  ... like it is mentioned in the following topic: cannot start process oracle obiee11g Manager
  
  or to use the BI service 'stop' then 'start service BI '.
  
  
  but the Bi server is still not present.
  
  I can connect to services presentation OBIEE ("http://localhost \analytics"), but do not display the webcat sample graphics (I don't know if it is related to the absence of bi server), and I can not open online repository (it's probably linked, this time!).
  
  
  You have any ideas?
  Thanks in advance
  
  Published by: A. Drieux May 15, 2013 09:30 - title change

  Hello

  During installation if you have selected the option 'Install' as 'Easy install', then you won't find BI Server in the administration Console.
  The administrator of the server itself will act as a server of BI. And also the port to access the URL BI 7001.
  Only in 'Enterprise install', you will get separate BI server.

  Kind regards
  Arul

• How to start Oracle Linux Builder

  Hi all
  
  Can someone please by telling how to start Oracle Linux Builder?
  
  Thanks and best regards to all

  Hello

  There should be a rwbuilder.sh script
  in ORACLE_HOME/bin for 10.1.2.
  in ORACLE_INSTANCE/config/reports/bin for 11g

  Of course, you must have a "X display server" facing up and running and the DISPLAY variable must be on this 'X display server.

  Example:

  Export DISPLAY = 123.456.789.12:0
  $ORACLE_HOME/bin/rwbuilder.sh

  Concerning

• Cannot install Oracle Linux 6 EMP 11.1.2.3.0 64-bit

  I tried to install 11.1.2.3.0 on Oracle Linux 6 64-bit PMC. I downloaded and unpacked rest of files in a directory and started installing. But during the installation I can't select the major components because most of them were grey. How could it happen? I don't know what don't get me.

  Is the command that I used to decompress the files

  unzip file_name.zip

  The system version EMP 11.1.2.3.0 for Linux x 86-64 part 1 V45342-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 2 V37974-01

  EPM System Release 11.1.2.3.0 part 3 V37933-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 4 V37975-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 5 V45343-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 6 V37977-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 7 V37978-01

  The system version EMP 11.1.2.3.0 for Linux x 86-64 Oracle HTTP Server V37979-01

  It is appreciated if anyone can help.

  Not always and that these elements should be included in the files listed by the OP, in many cases, it may be requiring the linux packages are not installed, for example.

  

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

  Hello
  
  I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
  I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
  After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
  
  , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
  
  Rgds,
  Thiru

  Have you reviewed these docs?

  CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
  Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

  Thank you
  Hussein

• How to install the web 32-bit server on Oracle Linux 7 (64 bit) for Siebel SWE?

  Hello community,

  I'm being a sandbox Siebel installation in a Virtualbox machine using Oracle Linux 7, Oracle DB 12 c and Siebel 15.5.

  I did very well for all installation process since it became a large number of Frank from previous versions.

  However, I still have a remaining item left which I have not been able to solve: Web server

  Originally, I installed 64 bit version of HTTP Server Oracle 11g of Web tier that filled well.

  However, after you apply the profile SWE logic, web server would fail start given that 32 libraries cannot be interpreted in 64-bit.

  Therefore, I tried to download 32 bit Web layer HTTP server only to find out that I could not even install using the linux32 command.

  Finally, I tried to build my own Apache server that required me to also build apr and apr-util libs.

  It was beautiful.

  [siebel@sbl-lab bin] $. / apachectl v

  Server version: Apache/2.4.17 (Unix)

  Built-in Server: 11 November 2015 00:41:35

  For the Server Module magic number: 20120211:51

  Server loaded: APR APR-UTIL 1.5.4 1.5.2

  Compiled using: APR APR-UTIL 1.5.4 1.5.2

  Architecture: 32-bit

  Server MPM: event

  thread: Yes (fixed thread count)

  forked: Yes (variable process count)

  Server compiled with...

  D APR_HAS_SENDFILE

  D APR_HAS_MMAP

  D - APR_HAVE_IPV6 (mapped IPv4 addresses enabled)

  D APR_USE_SYSVSEM_SERIALIZE

  D APR_USE_PTHREAD_SERIALIZE

  D SINGLE_LISTEN_UNSERIALIZED_ACCEPT

  D APR_HAS_OTHER_CHILD

  D AP_HAVE_RELIABLE_PIPED_LOGS

  D DYNAMIC_MODULE_LIMIT = 256

  D HTTPD_ROOT = "/ opt/siebel/apache".

  D SUEXEC_BIN = "/ opt/siebel/apache/bin/suexec".

  DEFAULT_PIDLOG = ' log/httpd.pid' d

  D DEFAULT_SCOREBOARD = "logs/apache_runtime_status".

  D DEFAULT_ERRORLOG = "logs/error_log".

  D AP_TYPES_CONFIG_FILE = "conf/mime.types"

  D - SERVER_CONFIG_FILE = conf/httpd.conf"

  However, once I started the web server after you apply the SWE, I received the following message:

  [siebel@sbl-lab bin] $. / startapa

  httpd: syntax on line 503 of /opt/siebel/apache/conf/httpd.conf error: structure of the API module 'swe_module' in the file /opt/siebel/apache/modules/libmod_swe.so is garbled - signature expected 41503234 but 41503232 - perhaps it is not an Apache DSO module, or has been compiled for a different version of Apache?

  I've been contemplating installing a chroot, a container or even another virtual machine exclusively for the web server.

  Before proceeding with additional measures that I might regret, could you please how you would proceed in this case?

  Thanks in advance

  Kind regards

  Alejandro Soto Laguas

  Nevermind, I checked certifications and Apache 2.2 should be used instead of Apache 2.4

  Everything is ok now.

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian

• VM Player 3: VM Oracle Linux 5 connection errors

  People,

  Hello. I am running Oracle Linux 5 VM Player 3. The host OS is Windows 7.

  3 VM and Oracle Linux player 5 worked properly for a long time. Today, it happens a strange error below:

  After starting Oracle Linux 5 VM Player 3, I type in user name and password to connect. It takes a few minutes abnormally. 6 mistakes then comes one by one below:

  1) an error occurred during the loading or saving of the configuration information for Nautilus. Some of your configuration settings may not work correctly.

  I click on the "Détails" button and the following message appears:

  Failed to contact configuration server; Among the possible causes are that you must enable TCP/IP for ORBit network features, or you have NFS locks defective due to a failure of the system.

  see http:// www.gnome.org/projects/gconf/ for more information.

  Details-

  1: IOR file "/ tmp/gconfd-user/locking/ior" No. successfully opened. No gcond located: no such file or directory.

  2: IOR file "/ tmp/gconfd-user/locking/ior" not open successfully, no location gconfd: no such file or directory.

  2) an error occurred during the loading or saving of the configuration information for the Power Manager. Some of your configuration settings may not work correctly.

  In the popup Window Power Manager, there is a yellow triangle with black!

  The message is: the GConf, schema Setup error battery_low_percentage cannot be zero.

  3) an error occurred during the loading or saving of the configuration information for print notifier. Some of your configuration settings may not work correctly.

  I click on the 'Détails' button, the message is the same with error 1) Details.

  4) an error occurred during the loading or saving of the configuration information for gnome-settings-daemon. Some of your configuration settings may not work correctly.

  I click on the 'Détails' button, the message is the same with error 1) Details.

  5) an error occurred during the loading or saving of the configuration of gnome-sessioninformation. Some of your configuration settings may not work correctly.

  I click on the 'Détails' button, the message is the same with error 1) Details.

  6) there was an error at startup of GNOME Settings Daemon.

  Some things, such as themes, sounds or background settings can not work properly. The last error message was:

  Has not received a response. Possible causes include: the remote application has not sent a response. Blocked bus message security policy response. The response period expired, or the network connection was broken. GNOME will always try to restart the settings Daemon next time that you log on.

  After a few minutes, desktop screen becomes black background with all the icons on it.

  But no bar. I can't click anywhere to run.

  This is the first time for me to cope with such a strange mistake. I do not understand what causes this kind of errors.

  I checked VM > Settings > hard drive > capacity:

  Current size: 96.9 GB

  Free system: 41.7 GB (there is free space on the Windows 7 host drive)

  Maximum size: 100 GB

  I created the virtual hard disk for Oracle Linux 5 as 100 GB. The current size of 96.9 GB indicates 96.9 GB 100 GB has been used. So, 100 GB - GB 96.9 = 3.1 GB.

  My questions are:

  (1) how much free disk space is required to start the Oracle VM Linux 5?

  (2) what are the causes of the 6 mistakes when connect to Oracle Linux 5?

  (3) does "not enough disk space of vm" cause 6 mistakes when connecting Oracle Linux 5?

  (4) how to fix errors?

  Thanks in advance.

  Hello

  For the question on what is LVM see: Logical Volume Manager (Linux) - Wikipedia, the free encyclopedia

  For tips on how - to use LVM, please see this article:

  Linux Sysadmin: How to manage LVMs with a GUI

  Before you can add more space, you need to resize your virtual drive and make more great or you will need to add another virtual disk to the virtual machine.

  The/3 GB to use is only available for the root user as it is in the safety margin of 5%.

  If Linux, UI drag / move uses a temporary folder, then is under/tmp

  To find out where disk space is used, the commando of the can be used.

  Use the command "of the man" learn more about the options.

  for example.

  of the - SH/tmp

  will show how using the tmp folder.

  The - SH/home

  shows how much space takes the home folder

  etc...

  --

  Wil

• R12 Quick Installation on Suse Linux or Oracle Linux fails

  Hello

  I tried several combinations of operating systems to try and install correctly using the Oracle R12 / quick installation but I could not. My last attempt was on Suse Linux 10. When the installation wizard is complete, database checks are successful but HTTP server is unresponsive and all subsequent checks fail.

  The reading of google and the various threads on this forum, I found that for Oracle Linux, we must apply the patch that contains libdb.so.2. Since then, I do not have an account to support oracle, I cannot get this fix and based on rules, no body can send it in an email, which means that we can not install this distribution on Oracle Linux without having to pay for the supported. Since then, it is a learning exercise without the use of serious production of R12 apps, we do not have any arrangement with Oracle support.

  For Suse, I also have the same problem, but when I try to start the opmn manually using opmnctl beginning, she responds with message, began. But when I use opmn stopall, the computer stops responding. Now, I don't know yet how to start debugging this problem.

  I would give just to try to install it or there at - it a hope?

  Thank you.

  Hello

  I finally managed to install R12 on Suse Linux Enterprise 10 SP3. I decided to start again after a repair for the past two days. Here's the process:

  a. install Suse Enterprise 10 SP3 with office and all development packages offered in the facility.

  b. click the computer--> install the software--> search for the 'db1 '. It will give you two or more packages. Install db1_185xx (from Berkley). This provides a required libdb.so.2.

  c. then go through the installation as outlined in the instructions using rapidwiz.

  It fills correctly and I can see the login screen now.

  Now, I need to know how to put in place to automatically start all services after startup.

  Thank you for your help.

  Kind regards

  Sohail naima.

• ASMLIB with UEK / patches Oracle Linux 5 7 Group

  Hi all
  I m a stuck with ASMLIB after a update OEL 5.4 to 5.7.
  So Unbreakable Linux kernel (2.6.32 - 200.16.1.el5uek) is installed.
  
  Advice of Documentation of the DSO to review 11.2db install the documentation. But in the 11.2db, there is no description for the OL5.7 (UEK). Only (the old way) by installing the rpm´s
  
  Can someone help me find right ASMLIB for Unbreakable Enterprise Kernel on Oracle Linux 5.7 documentation.
  
  My problem
  In any case, I've updated my OEL5.4 to OL5.7 with UEK after that restart asm could not start due to bad asmlib (old Version 5.4, asmlib 2.0.4...).
  Dig before discovery to google asmlib is now included in UEK, after uninstalling asmlib
  /etc/init.d/oracleasm works fine but the crs cannot discover the voting disk :-/
  /U01/app/11.2.0/grid/log/borac41-prod/CSSD/ocssd.log
  _______________________________________________
  vote discovery file string(/dev/xvdd*)
  2011-08-24 11:11:19.665: clssnmvDDiscThread [CSSD] [1078286656]: using discovery string/dev/xvdd * for the initial discovery
  2011-08-24 11:11:19.665: [SKGFD] [1078286656] discovery with str: / dev/xvdd *:
  
  2011-08-24 11:11:19.665: discovery of EGGS [SKGFD] [1078286656] with: / dev/xvdd *:
  .......
  2011-08-24 11:11:19.666: discovery of the OSS [SKGFD] [1078286656] with: / dev/xvdd *:
  
  2011-08-24 11:11:19.666: [CSSD] [1078286656] clssnmvDiskVerify: Discovery successful record 0
  2011-08-24 11:11:19.666: [CSSD] [1078286656] clssnmCompleteInitVFDiscovery: completing the first discovery of the file with the right to vote
  2011-08-24 11:11:19.666: [CSSD] [1078286656] clssnmvFindInitialConfigs: no vote files found
  _________________________________________________
  
  Any suggestions? or links to the documentation?
  Thank you very much
  * T
  
  Published by: tbrinkmann on August 24, 2011 03:17

  Hello

  It seems that your ASMLIB has not yet identified the discs.
  So I guess after changing ASMLIB (uninstall) you forgot to redo the configuration.

  Can you do an asmlib set up?

  In addition, it is recommended to overwrite a partition and not on the disk itself.
  So if you did, you might want to query/dev/xvdd * 1 instead of/dev/xvdd *.

  Concerning
  Sebastian

• PS6100 with firmware version 7.0.5 + Oracle Linux 5.10 + multipathd question

  I try to use the multipath regular linux (device-map-multipath) with my PS6100 and it doesn't quite work. It gives me "readsector0 Auditor reports path is down," "pdu (op 0 x 50000370 itt 0x1) rejected.» Code 0 x 4 reason"errors and my iSCSI connections are reset every few seconds. My OS is Oracle Linux 5.10 (fully updated) and my PS6100 is running with the latest firmware version 7.0.5.

  The latest kit from Dell STRUCK for Linux, 1.3.0-2, works fine on this machine, but the reason why I'm putting multipathd is to compare the performance between the two solution. If we look at the other system we have that run the ordinary multipathd, paths of Dell could give us performance. We doubt it, but we want to do the tests and a comparison of its performance stats.

  We have another server which has almost the same configuration (same OS connected to an another PS6100) and multipathd works well on this one. And one of the difference between this system and no work is that the PS6100 is running on firmware 5.2.5 instead of 7.0.5. I'd be willing to downgrade firmware (this unit is not yet in production, and I don't mind losing the data on it) but I'm not find anything on the internet that show how other that of the "call from Dell and it'll do it for you. If the only thing you need to do is a special command in the CLI then why there is no documentation on this subject?

  So I wonder if anyone here runs a firmware equallogic 7.0.5 with the multipathd of linux and a RedHat 5 of operating system (Oracle Linux, Redhat, CentOS, etc.)?

  Hello

  It is documented in the release notes for the firmware 7.0.x.  There is a bug in Multipathd, which is exposed with 7.0.x. firmware.   Replace readsector0 TUR or ARM and restart multipathd.  Protocol errors will stop and Linux MPIO works perfectly.

  Kind regards