Cannot start wls integrated on windows 7

Similar Questions

• We get an error "this device cannot start" Code 10 on Windows 7.

  Original title: USB not recognized verified work storage device

  I have a 8 GB USB Flash drive that has, until recently, worked perfectly on several OSes including Windows 7 and 8. Recently, the player does not seem to want to work on one of my installations of Windows 7 on a PC (HP EliteBook 8470p).

  I tried to reinstall the drivers for it on my machine specific windows 7 that does not work on. Device Manager gives me "this device cannot start. (Code 10) "even after reinstalling the drivers and reboot several times. I use also some virtual machines in Windows 7 and 8 on the same PC, and when connecting virtually the USB key to the virtual machine to Windows 7, I can't detect it. When you connect the device to the virtual machine from Windows 8, I can access the files and even format, so the USB ports on my computer are all functional.

  To summarize, the device works in Windows 7 and 8 separate facilities of this computer, but does not work on 7 on my TI, if the main or virtualized operating system. The VM of Windows 8 on this computer can recognize the device.

  Thanks for the answer, except that I discovered the problem. I checked upward in the disk management window, and I saw that the reader, for some reason, was not assigned a letter. After you manually assign the drive letter, all data on the disc is now available. Thanks anyway.

• Cannot start the Recovery Console Windows from the installation CD

  On my MacBook I ve running in VMware Fusion 3.0.1 a Virtual Machine with Win XP Pro.

  When I reboot Win XP Pro and start again from the Windows XP Pro installation CD, I can see the "Welcome" with the menu screen

  -To install Win XP now, press ENTER

  -To repair an installation of Windows XP using the Recovery Console, press r.

  -To quit Setup without installing Windows XP, press F3.

  When I click ENTER or R, I see the message

  -The installation program did not find any hard drives installed in your computer. Setup cannot continue. To quit Setup, press F3.

  Today the question? In the 40 GB of the virtual machine, I have two free partitions of 10 GB and 20 GB Win XP Pro execution. Why see Setup cannot process this partition?

  I ve also installed a second Virtual Machine, but the installation of VMware Fusion not show the "Welcome" screen, but it installs both Win XP Pro.

  The installation of the recovery in the virtual race Machine Win XP Pro Console is successful, but when I start the recovery in Start Menu Console, just the screen blue 0x7B (inaccessible boot device).

  What must I do, to start the Recovery Console in VMware Fusion? Or another question: when merging does support the Windows Recovery Console?

  Wow, nothing indicates that you use a German version of Fusion that your English is excellent.  Anyway as VMware headquarters is in the United States, like me, I always provide information in English and information-specific guidelines in the VMware Fusion help files come from the English version as well as any Documentation from VMware that I reference.  I say this next part as a general and not directed comment towards you, as you have noted your using the German version... Any person requesting help must always at least include technical information referencing manufacture, make, model, version, and language other then English, material goods and software involved in issues.  We'll find a good reference for the type of information that must always be included in HOWTO: ask (and answer) Questions.

  As a much get into the BIOS if you use the Fusion 3, you don't need to enter the BIOS to change the boot device as this can be done in the settings now however to enter the BIOS for other things that need/want of press you F2 directly after starting the Virtual Machine and after having clicked on the screen but the av VM boot so fast that it's easily missed.  You can add the following settings to the file of configuration .vmx of the Virtual Machine to slow down the startup so that force once in the BIOS.

  bios.bootDelay = "3000"
  bios.forceSetupOnce = "TRUE"
  

  The bios.bootDelay is in milliseconds and the bios.forceSetupOnce Boolean value is then set to FALSE, automatically.  Each of these parameters are independent of each other.

  You can find the following useful notes for this and or other uses...

  ====================

  Notes: keyboard

  Different setting function, you may need to adjust various preferences keyboard to work with the function keys and or use the Fn key.

  OS X > you may need to press the Fn + F6 etc. and this can be changed in system preferences > keyboard & mouse > keyboard > use all F1, F2, etc...

  Merger 1 > VMware Fusion (menu) > Preferences... > keyboard and mouse > activate Mac OS shortcuts keyboard

  Fusion of the 2 and 3 > VMware Fusion (menu) > Preferences... > keyboard & mouse > Mac OS shortcuts > activate Mac OS keyboard shortcuts

  ====================

  Notes: Starting the virtual machine from CD/DVD or ISO Image

  If the Virtual Machine is not initiating the CD/DVD or ISO Image, and then select the CD-ROM in the Boot Menu.

  Engage the Boot Menu and select the CD-ROM drive...

  The bottom of the virtual machine just above the status bar after the Virtual Machine is started, it has...

  "Press F2 to enter SETUP, F12 for the start-up network, ESC for Boot Menu"

  On the status bar, it features...

  'To direct entry to this virtual machine, click inside the window.'

  BIOS flashing by is very fast so you need to work quickly however give it a try and if the Start Menu cannot be higher then the configuration of the Virtual Machine file .vmx must be edited to slow the STATION and or change the boot order.

  OK, click the big Play button on the screen of the virtual machine, and then quickly mouse click in the Virtual Machine screen and then press the ESC key to bring up the Start Menu and select the CD-ROM drive. If it boots the CD very well and if the Boot Menu does not appear, because he goes just to quick access and then try again or...

  Watch the Boot Delay section in the current user's Guide to VMware Fusion and the section of the virtual machine files of A Beginner's Guide to VMware Fusion on when the configuration of the Virtual Machine's .vmx file is and add the following lines to the file. TextEdit can be used to edit the .vmx file.

  To give more time to indulge, the Start Menu Add the following...

  bios.bootDelay = "3000".

  For, once, force the VM in the BIOS to change the Boot order in the BIOS if the CD-ROM is first add the following...

  bios.forceSetupOnce = 'TRUE '.

  ====================

  Notes: By modifying the .vmx file

  For Fusion 2.x and 3.x ctrl-click the target entry of Virtual Machine on the windows of the library of the Virtual Machine and choose Show in Finder and then Ctrl-click on the packaging of the Virtual Machine and select to display the contents of the package.

  By default in the normal Fusion 1.x virtual Fusion function file are created in the folder "~/Documents/Virtual Machines" and according to host operating system version and or Fusion worm. There may be a .localized after Virtual Machines although by default, this extension is not visible in the Finder.

  ~ Is your Home Directory.

  The files that make up the virtual machine are placed in a folder (aka Bundle and or packing) bearing the extension '.vmwarevm' which, by default, this extension is not visible in the Finder.

  Example: "~/Documents/Virtual XP.vmwarevm Machines/Windows" in the Finder would just resemble an icon named "Windows XP."

  To view the contents of the entire file "Windows XP.vmwarevm" ctrl-click (or right-click) on the "Windows XP" icon and select Show the contents of the package.

  To change the configuration file of .vmx ctrl-click (or right-click) on the "Windows XP.vmx" file and select open with > choose another... then in Application choose TextEdit.

  Note: If you use Firefox do not copy and paste the parameters if TextEdit unless you copy only the exact line and nothing else in the case, use an editor such as TextWrangler.

  ====================

  Notes: Creating an ISO Image of the CD/DVD drive

  When you use utility disk in order to have a bootable ISO Image, you must select Master CD/DVD without encryption in which case by default, it will have an extension .cdr file and in version 1.1 of the merger and later does not need to be changed in .iso, although one can if one chooses to. A default .dmg image is compressed and is not bootable, as an uncompressed .dmg will start if changed in .iso and of course the source CD/DVD should be bootable in the first place.

  To create an ISO Image using disk utility...

  1 insert the CD or DVD disc into the optical drive of your computer.

  2. open disk utility (/ Applications/Utilities/Disk utility).

  3. Select the CD or DVD drive in the list of disks and volumes.

  4. Choose file > new > "Disk Image from (name of the disc)."

  5. type a name for the disk image.

  6. choose "DVD/CD master" from the Image Format pop-up menu.

  7 choose "none" from the encryption pop-up menu.

  8. click on save.

• My laptop cannot start or repair itself, Windows has been installed at the factory, so I have no boot disk, is there a way to get a free boot disk?

  I had problems with my laptop for a few weeks, I used Chkdsk to fix the problem she was having. Yesterday the comp froze while I was using firefox and when I reset windows not load and cannot repair themselves. My OS was installed at the factory, and I have the product key, but Windows no disk. Is there a way to fix my computer without buying another drive in windows?

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  and if you need a startup repair disk;

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Blue Screen BAD_POOL_CALLER cannot start the laptop after Windows XP updates

  My user has a Dell Latitude E6500 and after installing Windows Update, the laptop does not start in Windows XP.  Tried to repair, reinstall all Modes and each option we just get error BAD_POOL_CALLER not boot into the operating system.

  Reference Dell it's a software problem, probably caused by the update as no other changes have been made to the laptop.  Before we pay for Dell support software means someone has suggestions?  All options on Googling guess you can enter Windows in at least secure Mode that we can not so I'm stuck!

  See you soon

  See this article for some real good troubleshooting Info:

  0X000000C2: BAD_POOL_CALLER
  http://aumha.org/a/stop.htm

  Also:

  How can I solve this? (bad_pool_caller)?
  http://www.Tek-Tips.com/viewthread.cfm?QID=423270

• Cannot start Office applications after Windows Update. Clear side-by-Side error caused by the file of damaged

  Windows Update automatically ran yesterday on my Vista 64 Home Premium SP1 system.  Today, I can't run any Office Applications. I get an error popup that says: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »
  I learned how to use Event Viewer and found that a mistake by-side happening and a manifest file has been altered.
  The file is: x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_d08d7bba442a9b36

  Where can I get a clean copy of this file?  It is just a simple XML file.  Do a system restore is not good.

  Hello Astroguy,

  Thank you for your response back!

  Good to know that you have done a repair install.  What I would do is run the SFC scan, because you performed the installation of repair recently the chances are that the SFC scan should be good.  If there is a problem, it will signal you when finished.

  Then I would go to Windows Update to check if he has new updates and/or try to update all those who did not.  If you still get the updates that do not please let us know what he's trying to put up-to-date and error.

  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start normally infected says windows blaster worm Win32?

  Please help, I'm computer illiterate. I tried the bios I tried recovery tool. I can't even restore to factory settings pls help.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:

  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  Information on safe mode

  http://www.articlesbase.com/operating-systems-articles/using-Windows-in-safe-mode-4119768.html

• Computers cannot start from my Dreamspark Windows 7 disc.

  I have acquired an iso to install Windows 7 from Dreamspark program Dreamspark Premium.  However, it looks like a bad iso because when I burn it to a DVD, computers do not start.  I put the DVD as the first device during the boot and boot, and I also used the Boot Manager to select the DVD drive to start.  It seems that the computer tries to boot from DVD, but then goes to the start screen for the operating system already on the computer.

  I also tried to burn the ISO on USB, but it stops at 99% with an error.  It seems I'm the only person who got this wrong file ISO of Dreamspark.  Any help would be appreciated, thanks.

  In fact, they say which edition it is.  It just says: Windows 7 on their site.  I'm emailing Dreamspark, ask questions about editing and my product key.  I will update this thread when I have an answer.  Thanks again André for all the help.

  -Billy

• This device cannot start. (Code 10) Windows 7 64 bit JMicron PCIe Gigabit Ethernet Adapter

  Apparently, I get this error at random times in the day.  My ethernet port just no longer works and I tried disabling and reactivation that used to (a while back) work.

  Then recently I was disabling and re-enabling it, it gets stuck in the 'disabled' and this error message appears when I open "Properties".  I tried to reinstall the drivers for the device with the CD of my laptop came with, but that has not worked so I looked on the site Web of Jmicron and found a newer driver who, after installing again, did not work.  I have a fixed work wireless, but not with no LAN no is a pain in the thigh.

  WIndows 7 64 bit Home Premium edition
  Sager NP 5165 Notebook
  JMicron PCI Express Gigabit Ethernet adapt

  Try to update the laptop bios and chipset software provided by your computer laptop oem (dell, hp, whoever). Fixed an instance I had 10 with a device error.

• Cannot start the XP Mode window

  Hello

  I am unable to launch window's XP Mode in my machine. I do the following pop-up message.

  "Please make sure that Windows Virtual PC is installed and Virtual PC Host Process is running. Check the log of the events system for more details".

  Could you please help me solve this problem?

  Thanks in advance.

  Kind regards

  Sisi

  Sisi,

  I would have you post here to get the best exposure.

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itprovirt

  Let us know if you have questions about Windows.

• cannot start. tried to reinstall windows from OEM disc no go off the hard drive. How to remove computer virus problem

  error message {check HDD remove virus}

  Exactly when and where you see this msg?

  And that means "tried not to reinstall windows from OEM disc go" mean exactly?

• Cannot start the disk of Windows 7.

  Install problem

  Hi ive been running an office in uk compaq pressario 2129 on vista premium now my hard drive is broken so I thought I could buy a new window 7 os and new WD green 500 GB 3.5 hard drive player sara so I installed the drive and ot appears on the bios, the bios are 5.16 there a 5.23 update so I changed the bios to boot from the drive put windows 7 DVD in the dvd player saved BIOS power off and restartednow all im left wirh is a white im screen do not get something like a promt to press any key to boot from the disc, any help would be gratley appreciated best regards paul

  Try this:

  Remove the hard drive

  With the removed hard drive boot the computer and enter the BIOS

  Find your Sata operation setting and ensure that its value ATA

  Replace your boot order the way that was, save and stop.

  Reinstall the hard drive and the shoe at the screen BIOS F12 spam until the boot selection screen appears.

  Select the CD drive and continue with the installation.

  I hope this helps!

• Cannot start virtual machines on Windows - get "internal error."

  After restarting my computer, all the virtual machines in workstation that allows you to start now will no longer start.  Currently to get the super useless error message: "Internal error." which is of course totally shameful.

  I uninstalled and reinstalled, tried searching for "cpuidHash" in my registry to reset, which curiously is not there as part of the services, I tried to remove / delete the VMEM and even tried to create a new VM and start it without an operating system and all attempts to start no VM result in the same message.  Also get the same error when trying to boot from VMware Player.

  Key in the log error can be: "E105: PANIC: CHECK bora\vmcore\vmx\main\timeTracker_user.c:238 bugNr = 148722 '.

  Any help on how to get VMware software to service is appreciated - thanks in advance!

  Thank you Darius - had already tried.  It turns out that this specific response of spoonalious solved my problem.  Not sure what caused the problem in the 1st place, to my knowledge, nothing had changed, but after completing these steps and restart services the issue was resolved after much work.  VMware software are extremely fragile and breaks easily it seems:

  New host PC - VM will start is more (internal error - VMWare Workstation 11)

  Thanks to Darius and spoonalious for the position of solution!

• Error: 0 x 80070424 "cannot start the Windows Security Center service" when you try to start the Windows Security Center Service.

  original title: Error Code 0 x 80070424 on the Windows Firewall settings

  I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"

  Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg

  The base filtering engine

  http://download.bleepingcomputer.com/win-services/7/BFE.reg

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start right now the firewall

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security Center service

  http://download.bleepingcomputer.com/win-services/7/wscsvc.reg

  Windows Defender

  http://download.bleepingcomputer.com/win-services/7/WinDefend.reg

  BITS

  http://download.bleepingcomputer.com/win-services/7/bits.reg

  Windows Update

  http://download.bleepingcomputer.com/win-services/7/wuauserv.reg

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

• any time, I try to open adobe photo shop elements 2.0 it says could not start because the volume windows uses for virtual memory did not enough of free space see windows help for more information

  When I try to open adobe photo shop elements 2.0 message that says: cannot start adobe because volume windows uses for virtual memory doesn't have enough free space, which could lead to stability problems see windows help for information can help you

  Hi gregoryandme,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Uninstall and reinstall the Adobe photo shop program.

  Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.