Card connection USB Arduino fails on El Capitan

Similar Questions

• Help - p7-1020 card connection usb mother removed - how to connect properly?

  I have a p7-1020 new just put 16 GB of ram, and in the process, ripped the double USB port on the motherboard. They have 1 standard connection (with most of the sons of these two gray usb cable internal to the ports on the front) and a second - two pins (one black wire from each cable usb) - hell whence the second cable go? Don't even want to power up without a definitive answer. Any help is greatly appreciated. Thank you in advance.

  man, I feel stupid...

  Your p7-1020 has the same casing and motherboard for my new p7-1026. I opened his case to update the graphics card today and saw the cable connector / you are referring to. The small connector 2 pin does not go anywhere... it just hangs there.

  Frank

• Trident video capture card connected via USB 2 not working not properly under XP

  I use a Trident card connected via USB 2.0 video capture and I had a weird behavior:

  -sometimes not detected (not included in the list of devices)

  -sometimes not recognized (unknown device)

  -sometimes not start (Code 10)

  -sometimes works very well

  I used a USB Tracker to study the issue and found out that the usbehci driver is not able to activate the USB port.

  The message sequence is as follows (when it works):

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is enabled

  This is when it does not work:

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is NOT enabled

  Function Clear (4) Port, connect to state change - success

  Get the status of the Port (4) - success

  Serial Port (4) feature, reset the change - success

  I have more tracks, but I don't know if this is the right place to post.

  Thank you in advance to anyone willing to help me.

  Sincerely

  Andrea

  * original title - device USB not recognized or not started or sometimes work *.

  This link might be useful for:

  Advanced troubleshooting tips for General USB for Windows XP problems

• Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port.

  Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port. I looked for the answers here and I can not find my problem even for questions answered with Dibcom TV Tunder device since I can't find this device in my laptop. He is able to install and operate in another laptop running Windows XP. Been tried to uninstall and reinstall more than 5 times and he continues to meet with even has no message and I even downloaded the latest drivers from the local Web of ISP site. Helpdesk of mcafee and contacted microsoft, but they are not able to solve my problem.

  Thank you.

  Managed to solve by referring to the answer below posted by Rudolph_DT asked on thread

  Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  Thank you.

• Problem connecting USB to install HP Photosmart 5510 all-in-one inkjet

  Photosmart 5510 all-in-one inkjet

  Windows XP Pro x 86 (32-bit) service pack 3

  Software installs fine until he asking for the type of connection. The computer does not have wireless so I select USB connection and it fails every time. If I select to connect to PC later and plug in the USB, Windows detects new hardware (HP 5510) and asks where to look for drivers. When directed to the installation CD "Invalid data" error when copying files. In the Device Manager in the USB section it lists the Photosmart 5510 with a yellow! Selection of reinstall the driver results in an "impossible to install error.

  There is no other printer currently installed on the computer and the 5510 Photosmart is set as default printer. So far I have;

  tried different usb ports

  tried running the installer from the installation CD

  I tried to download updated drivers

  tried to install with disabled firewall and antivirus

  tried to install it in safe mode

  Same problem occurs every time. Any solutions or suggestions would be greatly appreciated!

  Thank you.

  Finally solved the problem. Had an old Pentium 3 machine around the pose and decided to try to change the disk hard on and see if I could install the printer with a different material.

  It turns out that the mup.sys file, which has something to do with PnP devices, has been damaged and Windows wouldn't start in the other Tower. Then, I took out the HARD drive and put it back in the Dell can reformat Windows XP and guess what, printer installed without a hitch the first time I tried! Now I have to reinstall everything on the computer * sigh *.

  In any case, the printer problem fixed!

• Connect USB hard drive to the SD2010KY DVD player

  Hi there Aussieland...

  * More about SD2010KY DVD player + * bought on a month back...

  Any kind dbo know the answer to:

  Could it be caused damage to run a USB connection external 3 1/2 "HD (160 g) - say a .avi movie - into the USB port on the front of the unit?

  That is to say, power supply of the unit will be responsible for the extra bit Ok?

  Or is this the wrong forum to ask this detail? :)

  Thank you - everything you need to know about would of course be appreciated...

  See you soon

  To be honest, it is Toshiba forum created for calculation problems.
  In any case, check the drive specification to see if the USB port has enough power for external HARD disk. I had old DVD player and I could only use USB keys.

  You can try to connect USB HDD to see if the drive will be recognized correctly. You won't damage anything.

• I just upgraded 5 c to 6 s GSM (o2). I have all new versions of itunes ob both devices. When I connect usb a message:-can't use the iphone "iphone" because he needs a newer version of itunes. Help!

  I just upgraded 5 c to 6 s GSM (o2). I have all new versions of itunes ob both devices. When I connect usb a message:-can't use the iphone "iphone" because he needs a newer version of itunes. Help!

  But you have the latest version of iTunes on your computer?

• Help! Unable to connect USB with the computer!

  Hey... I use bike g 2nd GEN recently, when the options of connectivity usb came... I have disabled by error two options... And now, when I connect my phone with cable USB WHAT DO not come connectivity options to the top! And only charges the phone!
  
  I also tried the check in the phone settings... But no use... Help, please!

  Go to settings > storage > tap the icon at the top right (3 vertical points) > Connect usb to the computer, you can select the USB options.

• Communication of VISA with connected USB GSM modem using a protocol AT

  Hello, I am writing an application that should send sms messages.i have a connected USB GSM modem that supports the PROTOCOL. The modem works by using its own software and the HyperTerminal.I have used VISA driver development Wizard to create the .inf file. The device is now recognized and registered to the MAX. However, I can't understand how to code the commands and read the responses using write VISA and VISA read. Thanks for the help, Dima

  The last thing you should have to do is create an INF with the wizard. Remove completely and the compiled version. What you want to do is to use the inf file supplied with the device which a serial port to the BONE and makes it usable with Hyperterminal. It should appear in MAX as a serial port. Once you have restored all the way it is, then you can start with the examples of series and writing to it should work as it did in Hyperterminal. In other words, simply send the chain of command.

• Application that created on another computer will not connect usb-camera

  Hello, friends!

  I have a problem:

  My application that was created on my computer does not connect usb-camera on the other computer. I installed the LabView run-time engine and the runtime of vision on this computer but it is not useful :-(application is open, but the usb device not running.

  I'll be thanked for any help with this problem!

  Thank you very much!

  It's the solution to the problem:

  Solution:
  To run an exe containing NEITHER-IMAQ for USB functions, follow these steps on the computer that is running the EXE file:

  1. Install the following execution engines:
     • LabVIEW Run - time Engine (same version that was used to develop the VI)
     • Execution of vision engine (same version that was used to develop the VI)
       • One Vision single-seater deployment license is required for each computer target on which you install the runtime of the Vision. See all the related links for more details.
  2. Copy the following dll files to the directory on your development computer system, usually C:\Windows\system32 directory of your target machine system.
     • ImaqDirectShowDll.dll
     • ImaqDirectShowExport.dll
  3. Register at ImaqDirectShowExport.dll by the Windows Start Menu , click run. Type regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll, and then click OK to register the DLL.

     If you are on a different operating system or if the system folder is different and that you want to copy the path instead of typing all the way, you can drag the file to the command line at the prompt to run it, highlight the path, right-click and select it copy.  Paste in the command prompt by right-clicking and selecting window block.

     The ImaqDirectShowDll doesn't have to be registered.

  Once these steps are completed, and the DLL is registered successfully, your EXE will work.  Vision Acquisition software or Vision Development Module must be installed on the target computer.

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• For some reason, I can't get my Outlook Express to send my emails... they do not connect or send failed

  For some reason, I can't get my Outlook Express to send my emails... they do not connect or send failed... what I am doing wrong to cause this... I have used Outlook Express in the past and had no problem with it... Also, how can I know what e-mail programs POP3 or request the program Outlook Express? Could you please clarify this for me, thanks...

  I use Windows Live Mail as my regular e-mail address... but I can use a different e-mail to another e-mail program to configure Outlook Express?

  Visit the website of your email provider and see if they have instructions to set up an account in Outlook Express.  They provide you with the appropriate settings.   Nobody here knows them, because they are specific to the e-mail provider.  So check with your provider of messaging on the correct settings to use for OE.

  Steve

• Copy the folders (backup) of a connected USB device

  Hi, is it possible to copy (or backup) the content of my (NMH305) mediaserver to a USB HDD connected directly to the media server? I tried the utility 'copy' in the file browser, but it will not copy in files on a connected USB device (by clicking on the "copy file" button does nothing).

  Is the USB key to your aid in format NTFS or FAT32? If it is in NTFS format, then it could be the reason why you can not write to the USB plugged into the USB port of mediahub. Some linux-based devices do not work well with NTFS format. Try a FAT32 formatted drive into the USB port on the mediahub.

  See you soon.

• HP OfficeJet 4650: HP utility does not connect to my new portable printer HP OfficeJet 4650 of my connected USB MAC

  Utility HP does not connect to my new HP OfficeJet 4650 of my Mac connected usb portable printer.  I have to turn off the printer, printer and try again sometimes that works.

  Welcome @grizley1967.

  Thanks to their participation in Forums of HP! I see by your post that the HP utility connects to the printer. I will definitely do my best to help you.

  Make sure that the printer is connected directly to the Mac with the USB cable.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Select the startup disk in the list of volumes.

  Click the first aid tab.

  To verify permissions, click on verify disk permissions. To fix the permissions, click on repair disk permissions.

  Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  I recently installed an Epson L555 instead of my Epson L355, which worked well with my software windows 7 and my BACK program based. However, whenever the L555 turned the printer just keeps ejecting the hopper pages until it is empty. On the menu screen, it says "printing", but there is nothing in the print queue and I didn't send anything to be printed. Sometimes it reads "Fax set auto answer. By pressing the Stop/Reset button stops the ejection pages and "Cancel" is displayed on the screen. This continues for about 2-3 minutes, then the pages start ejected again. Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  Thanks for posting your query in the Microsoft community.

  I understand that print jobs are getting cancelled and I will be happy to answer your query. There could be several reasons for this cause and to diagnose the problem, initially, I ask you to refer to the suggestions in the article below and check.

  Solve printer problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.