Change of no printing after cartridge HP 7520

Similar Questions

• Error: Incompatible cartridge, after changing the HP printer ink cartridge.

  original title: printer problems

  My printer, I cannot print. I changed the black cartridge which was sold out with an identical (recommended HP) and it says it's incompatible. It says go to menu settings and the problem is that I can't remember where it is! I have windows 7. Help, please.

  Hello

  What is the brand of the HP printer?

  I suggest you to refer to this article to resolve this issue.
  "Incompatible print cartridge" message in Windows after installing ink cartridge
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01082138

  To contact HP support, see the link.

  Let us know if it helps.

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• Printer Epson C88 + won't print after new color cartridges replaced

  Printer Epson C88 + won't print after that new color ink cartridges have been replaced.

  Hello

  ·        What happens when you try to print from the Epson printer? You get the error message? If Yes, what is the exact error message?

  ·        Your printer is able to print a test page?

  ·        What you are trying to print? You use third-party applications to print? If so, what application are you using to print?

  Method 1:

  I suggest you run the fix it is present in the article below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  To further support I suggest you to check the article mentioned below.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  To get help, I suggest you to contact Epson. Click on the link below.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=contact&OID=69123&prodoid=63059194

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• HP laserjet p1006: does not print after changing the toner

  I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

  Hi @cindycb,

  Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure all the orange, packaging material is to remove the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Open and close the cover five times quickly. It should print a page with black lines on it.

  You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

  You use Genuine HP Toner?

  Please let me know the result and if there is anything else I can help you. Thank you.

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• HP Photosmart C309a does not print after I installed new black ink cartridge.

  Printer was working fine until I replaced the black ink cartridge.
  Does not print the text in black on the printer test page.
  The States new HP printer installed cartridge.
  All other colors are working well and were replaced at the same time.
  Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
  Also tried to restart the computer.
  Could there be a problem with the ink cartridge itself?

  REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!

• Print after changes

  Im having problems printing of a revised document that I made changes.  Ive saved the document with the changes, but when I print it, the changes are not there. How can I get the changes on the printed document?

  In the print dialog box under "comment forms &", make sure you only select "Document and annotations.

• Photosmart 7520: Printer Wifi connectivity Photosmart 7520

  This printer works well in a small office environment with a Wi - Fi connection.  It has been moved to a home office a piece.  The printer is installed with a wireless connection and works immediately after installation.  An attempt to print after the computer went to sleep or stopped the error message "Cannot communicate with the printer" appears and the impression is not accomplished.  By using the wizard to set up printer on the printer screen, the wireless LAN is located and displayed.  After entering the password, the printer is operational and print all documents in the print queue.  I uninstalled the printer driver, deleted all files associated with HP and reinstalled the latest full driver twice.  No change, the printer works for this session and then connect not when subsequent attempts unless the wireless Installation procedure is complete.

  I have a same printer bought in the same place at the same time and worked in the same office as the above printer OK.  That 7520 does not connect to the wireless network after the appropriate network is displayed and the password is entered.  The print doctor shows a communication problem but has no solution.  All other wireless devices, including computers used in this location connect you and operate without problem.

  It of a problem inherent in the 7520 series or is there another procedure that may correct the problem?

  Hello

  Thank you for using the HP Forums.

  Can you try using a TCP/IP port?

  Creating a TCP IP port

  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  This video resource will show you how do:

  Create & port use TCP IP

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Let us know if it works

• How to change default C4680 printing options

  Desktop computer HP, 64-bit processor.   Windows 7

  I had many odd order issues with my printer cartridges is not admitted, after reinstalling

  all the software printer (which does not solve the problem), I finally found a cartridge that "seems" to have

  eliminated the problem (for awhile).

  But now: 'properties' values return continually to: paper type = "Paper advanced HP", quality of printing = 'the best '.

  and the color to "High quality" options  ... Also disables "show preview before printing"...

  If this reset whenever I print a page, I receive minutes of the impression that I don't want.

  If I change them all, print or cancel the print request, then go back - I find that all have been reset to higher values (very slow) ultra print.

  How can I change these default settings - permanently?

  Hello diffnameand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems with your print settings.  I would like to suggestconsulting this document on changing the settings to print in Windows 7

  Good luck and please let me know the results of these measures. Thanks for posting on the HP Forums!

• How to change the default printer in Thunderbird

  I have access to several printers that I use in different places. I have to manually change the choice of printer with each e-mail letter I want to print when I change my location when you use thunderbird. I already changed the default printer in my printers folder. All other programs, including Firefox accept the choice of the default printer. How can I get Thunderbird to accept my default without delete all THE OTHER PRINTERS?

  The menu bar, select Tools-Options-Advanced-General
  Select the configuration editor
  Promise to be careful
  Enter the following in the search field: print_printer
  When this line appears, right-click and select reset.

  See if she resumes the new default printer after you restart Thunderbird.

  No menu bar? Press the ALT key.

• In the printer ink cartridge does not print in black on paper data

  The product name and number: e-all-in-one printer, HP Photosmart 5514 - B111h

  Operating system: Windows 7 64-bit

  Error message: no

  Changes made to your system until the problem occurred: no

  I went to copy the data on my printer and noticed the empty ink was passed out.  Changed the black print cartridge
  and now I can't print anything that has a black colour.  Replaced by a new black ink cartridge and

  Unable to copy or print everything about the color white.  Do you have all the guests on troubleshooting

  with no luck.

  Y at - it something else that can be done?  Would appreciate the help.

  Thank you

  Hello Alex,.

  You can try the following troubleshooting link:

  http://support.HP.com/us-en/document/c02914910

  In particular, solution 6 can be useful in your situation - print diagnostic print quality / check that the supplies are properly ventilated / print head cleaning.

  Hope this helps.

• Kodak ESP5AIO printer ink cartridges ok but print very faintly

  Printer ink cartridges ok but feel very low, troubleshooting says everythings ok. Any ideas?

  Hello

  1. which version of the Windows operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  3 are you facing the question with any specific application?

  I suggest to print a test page for the printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

  Reference:

  The printer prints part of a page, prints blurry ink or prints faded or inaccurate colors only: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems

  Since you are faced with the question with the printer cartridges, it would be best to contact the manufacturer of the printer.

  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9hbnN3ZXJzL2RldGFpbC9hX2lkLzE5MTkxL34va29kYWstZXNwLTUtYWxsLWluLW9uZS1wcmludGVyJUUyJUEwJUUyJTgwJTk0JUUyJUEwdXNlci1ndWlkZS9vcmlnX2ludGYva29kYWtfYjJjX2Vu

• Reset the default printer after each print job.

  I wish that my printer to reassign the default printer after each print job.  I have a Hp LaserJet 1020 on my desk as my default.  Sometimes however, I print on our printer color etc.  Then when I go to print again immediately after the color printing - it is (and not my default).  I looked in the printer properties, devices, etc. - but do not see where I could update this?  Can you let me know.  Thank you.

  You don't say how you make that decision to change printers. I have two printers, all-in-one (default) HP4135 and HP6122 duplexer.

  Example: Leave in MS Office Word 2007 default print would always be. But I can choose a printer to use. With this selection, as long as I stay within this project, the HP6122 could be used. It would default to the HP4135 if I closed the project.

  If you go: start, Control Panel, printers, you will see all printers. The default value has a green check mark. Right-click on the printer icon and a menu descends with an extra function "Set as default printer".

• Windows Vista x 86, and Windows 7, losing by default settings of the printer after install updates day or end of remote session.

  We have been troubleshooting this issue for a while and we didn't have a patch even if it's a known issue.  When a workstation is set up as a network printer, even if the default settings of Windows (xps document writer) has been removed, the workstation will lose the default settings of the printer after that remote desktop sessions or windows updates have been installed.

  We tried MS FixIT and a registry mod that changes the order of the printers without success.

  We are hoping that there is a fix available before finalize us our Windows 7 image for deployment.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows]
  "DebugOptions" = "2048".
  'The documents '=' '
  "DosPrint' = 'no '.
  "Load"=""
  "NetMessage' = 'no '.
  'NullPort' = 'None '.
  "Programs"="com exe pif bat cmd.
  "device"="no printer name1, winspool, Ne01:

  In our reg mod, we have changed the position of the device at the same time Ne00 and Ne01 without having an effect on the loss of the default printer.  The mod set the default printer, but the settings do not stick.

  I hope there is a fix for this, in addition to a logon script, because our users are on several remote sites.

  ISA1 MCSE

  Hello

  The issue of Windows 7, you have posted, suitable for the IT Pro TechNet public. Please post your question in the TechNet forum. Please post your question in the below mentioned link:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.