Check the scan

Similar Questions

• HP deskjet all-in-one 2540: recording of the scan

  The number of regulatory product is SNPRB-1204-02

  This problem has developed since yesterday.  When I scan a whole page, although the entire page shows, a part of the page shows this option is selected, but I've made the selection.  If I deselect the part or not, only the selected portion is recorded.   I used Dr. printer-scanner, that is no problem.  I couldn't find anything in the FAQ or the forum to address this issue.  I don't remember the exact date of purchase but I think it's less than a year.  Software help?

  Hello

  Before you uninstall the software I highly suggest to check the scan settings in the HP software.

  If you select this option to scan an image Auto-cropping function is likely to be shortlisted and so the analysis may get cropped.

  Please try, follow these steps and tell em that rather those who can solve the problem or not:

  http://support.HP.com/us-en/product/HP-DeskJet-2540-all-in-one-printer/5295960/model/5295961/document/c03941429

  Shlomi

• ENVY 15-AH151sa laptop: Guard for lack of HP Scan of my PC (to check the drivers)

  I had to download a driver this morning. I was able to pick the one I wanted and it worked. As I was on the help screen, I thought I would check if any other drivers needed to be updated.

  I get this:

  

  Is there a problem with this process? Should I please?

  New Envy 15-AH151sa
  More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10

  Taffy, I got what you ask.

  Want to see what other drivers need to be updated. You do not mention that one that you have already installed but.

  You have installed the HP Scan to see if your drivers are all up to date, but the analysis fails every time.

  Well, join the club. She does it for me too.

  The driver HP scanner is bug sometimes and does not always work correctly.

  It recognizes some of my products, like the bad model and fails.

  You can check the drivers manually but... as the saying goes, ""If it isn't broken, don't fix it".

  If your new windows 10 laptop is not working properly, won't change anything.

  You did that you need to update, so that a specific matter that fixed you. You're good to go.

  This applies in particular to the Bios. Do not update that unless you really have a problem.

  Windows 10 will automatically update as needed in most of the other pilots.

  Maybe it's not the opinion that you were missing, but I hope that it will offer some relief to determine if you need to update everything.

  BTW: The HP Support does not monitor this forum. It is operated peer (volunteer)

  Most of us is not employees of HP.

  Thank you

• imageFORMULA CR-180 check the log file to scan

  Hello

  I work with an imageFORMULA CR-180 check Scanner and when executing a good amount (longer than 100) of the controls, I noticed that the scan control stops and a pop-up window appears on the Analysis ToolPak asked if I would like to replace my log file and start over.

  The software that I use is called "Utility scan for CR-180II" and the log file contains the information of MICR line controls scanned, as well as the date of the analysis, and the location of the file to the images captured from the parser.

  Log file options under "Options-> MICR data parameters.

  What I do, it is by clicking on ' no, I want to overwirte the file ", stop the scan, moving the log of the 'old' file, restart the scanning and backup to a new log file.

  Is there anyway to work around this problem and record continuously in the same log file?

  Is there a memory limit on the scanner?

  This is the Web page of the scanner that I use:

  http://www.USA.Canon.com/Cusa/support/Office/imageformula_scanners/imageformula_cr_180_cr_180ii/imag...

  Hi lendjones!

  Thanks for posting in the Forum! Canon does not provide direct support for imageFORMULA product series, but your dealer will be able to help you! If you do not have a reseller, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide you with dealers who are in your area.

• How can I actually email the scan, and how can I check this virus?

  SENDING A SCAN

  I am currently using Internet Explorer 8 and want to send someone using Internet Explorer 8

  How do I actually email the scan AND how can I check this virus

  Internet Explorer is a Web browser, not an e-mail program... To send messages, you need an e-mail account and the recipient needs an e-mail account. You need to know your email address and you must know the e-mail address of the recipient.
   
  Download and run the free versions of these two programs to check the software malicious & software unwanted spies.
   
  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free
   
  SpywareBlaster
  http://download.CNET.com/SpywareBlaster/3000-8022_4-10196637.html 

• When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

  I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

  I'm mainly interested in the function of scan here.
  With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

  I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

  I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

  Thank you for all the good sites & info you have provided.

  Newbie.

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• How to check the Toshiba HDD for the failures and bad sectors?

  Hello

  I didn't really know where post this so im sorry if it's completely irrelevant to anyone, but I have an Alienware laptop and they can not help me (I know what your what to think he done here then?) so I was wondering if anyone knew a software that allows me to check the Toshiba HDD for bad sectors and failures etc.

  I used Hitachi Drive fitness test, but it will not help other that say there are critical and even with the seagate software, all mistakes two loading floopy. It would really help, and I couldn't find anything on the part of the customer support site. The answer probably lies with Alienware, but I can't contact them by phone right now...

  Thanks Khaloi.

  Hello

  The easiest way is to use the Windows operating system error checking option.
  Please go to the "My Computer", right-click on the drive and choose Properties.
  In the 'Tools' tab you will find the error checking. Here, you can mark them automatically fix file system errors and scan for and attempt recovery of bad sectors.

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• "Connection error. Check the Internet connection. »

  I just installed my printer (an HP CM2320fxi upgrade). Everything works except ePrint/Web Services. The printer is connected directly to my router. It prints network computers. AirPrint works from iOS devices. It can scan to e-mail and documents are properly received by mail outside the network accounts (i.e. it must be connected to and talk to the internet). All the router firmware and the printer has been confirmed to date. all devices have been reset and restarted several times. However, if I try to activate HP Web Services for ePrint installation, I get the following error message: "connection error. Check the Internet connection. »

  After struggling with this issue for many months, including many discussions phone and email exchanges with technical support from HP, they finally sent me a replacement printer.  It works as advertised right out of the box.  I don't know what was the underlying problem, but the fact is that he couldn't be corrected with one of the solutions proposed in the discussions on this forum.  Apparently, there's HP printers out there with a lack of internet connection has nothing to do with a solution that is configurable by the user.  If you have one, then you will need to replace your printer.

  I can't thank HP for that.  They tried my patience and tenacity of the months before offering the only real solution.  They must know their products better than that and should have replaced my printer several months ago.  That being said, the tech person with whom I had most of my relationships, it was a nice guy.  I expect he's working under an edict on exhausting all possible tactics before agreeing to replace the unit.

  Good luck!

• OfficeJet 5615 black stripes during the scan

  My Officejet 5615 works perfectly, but in recent months, it shows black scratches on document scanned on the glass. Bands go for the length of the scanned page, and the glass is clean. I guess there is something wrong with the 'pixels/conduit' scanners. You are looking at him directly when it works I do not see the strange light differences between all the lights/pixels. Would it be the internal scanning module simply dirty on some lights? How can I disassemble the glass and have access to a scanner directly so I could clean it up? Thank you

  Hi eferrari,

  I see you have found black bands when scanning.
  I'll be happy to help you.

  I checked the manual and it does not provide how to remove the glass from the printer, unfortunately.

  Series of all-in-one HP Officejet 5600 User Guide.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Problem number one causing lines in the analyses.

  I have provided a document through the steps to see if it will solve this problem.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  Do you get the lines when you perform a copy?

  Try the ADF and glass to see the results.

  I met this document for How to clean the Scanner glass. The document is good for different models.

  Since there is no documentation for your printer probably, it is not recommended.

  Use your own descreation. It might help you understand how to remove the glass to clean it.

  If it has not the tab then it is probably sealed in it.

  Personally, if it were me I wouldn't remove my printer.

  You might want to consider appeal to HP, they may be able to offer you a discount on a newer model. Contact HP worldwide.

  Thanks for posting on the HP Forums.
  Have a great day.

• 5610 all-in-one - black thick top of line down on the pages scanned using the scan feeder tray ONLY

  Using HP Officejet 5610 all-in-one I've had for years and maybe 6 months ago, I noticed that anything that is analyzed by the load plate (if you need to scan a bunch of pages without having to analyze each page individually between analyses what is tedious that need constant attention) has this thick black line goes up and down on the middle left of THE pages scanned. Honestly, it looks really bad like if there is something hidden in this terrible line through the process of moving the paper through the feeder, BUT the original is just fine without damage.

  If I scan just a page by placing the document on the scanner glass, and then NO matter whatsoever.

  100% reproducible every time.

  So I know that it has nothing to do with the glass (which is clean), but only when the scanned document must pass through.

  Checked the forums for similar problem and found no exact match.

  I imagine that an expert out there knows the answer to that high hand. IF you could speak up, I would appreciate it.

  I THOUGHT ABOUT IT!

  I read another post:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-Pro-8500A-plus-vertical-black-lines-only-when/m-p/1391261/highlight/true#M30268

  who is mentioned on opening the ADF cover. Well I opened the whole Assembly, having absolutely NO idea how it all works, and I found a 1 "x 8.5" thick mirror (for lack of a better term) who had what looked like white paint on it to the place where the pages were probably getting the black line. I scratched, retested and the question was gonzo - that's all!

  Then my wife just told me that she thinks that she knew what the problem was all along. She had put on a page and it had not dried, and she tried to put it in the charger to make a copy. She just thought that we were going to replace the printer even when and if ever, let me know. During this time it was me mad for months. What are you laughing at me? This all-in-one works very well for years - replace without good reason, must learn a new product, get new cartridges, out the same old, same old, NO way. If it is not broke, do not replace it!

  Detective Conan.

• Check the ink levels HP 4215 with windows 7?

  I bought a new desktop computer with Windows 7. Old unit was Windows XP. The installation disk supplied with the HP 4215 printer does not support Windows 7. But windows 7 OS has the inbedded of drivers so I'm able to use HP 4215.

  Drivers are limited to functions for this printer. No "HP Director", no kits, no way I know to check the ink levels is graphically on the screen, or an impression on.

  HP offers that print "Self Test Page" using the printer panel keys. The only Self Test page that can be printed is the 'Self Test report'. Who only give me various technical info and prints 4 large bars of color. It does not print the ink levels!

  HP.com says he should appear on a page of paper, ink levels. Nope! Can not get to do.

  Someone first hand experience in the visualization of the level of ink for 4215 HP with Windows 7?

  Thank you.

  Hi printer123xxx,

  Welcome to the Forums of HP Support! Yes you are right, you have some basic functions of the printer now, as for the self-test page that can be printed from the control panel this unfortunately does not include the estimated ink levels.

  I would like that run you HP print and scan doctor- it was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  The PSDR does not include the services of printer that may be just what to check the estimated ink levels, I can't guarantee that it works, but it has an option of ink level.

  

  Please let me know if it worked for you, I'll watch for your reply.

  Thank you

• Cannot save the file of the scanned document

  DeskJet F380, Windows 7 64-bit

  Although "I had been able to digitize, manipulate & save my document on file, this feature currently does not work. I tried to download & reinstall the software & drivers & even updates related to this issue. When I try to install the update I get the following message: "this update does not support HP devices you have on your PC. "You don't need this software update.

  Hello

  Please specify.

  Please check the ppp settings configured by the operating system, such as the HP software does support 100% DPI:

  1. Right-click on an empty area of your desktop and click on personalize. 
  2. To the lower left corner, click on the link of the display. 
  3. In the left pane, click Custom text size (DPI). 
  4. Make sure that the DPI value is set to 100%
  5. Restart your computer and try to scan the image.

  Please let me know of any changes, or the value is already positioned 100%

  Shlomi

• Size of the scanned after it was sent by e-mail allows small.

  I checked on the scanner, etc, everything I could think of and the scanned image is very good in size, readable, but when it is transmitted or sent by email to another email address, it is small to read. Scan only shows windows, 300 or 600 reference but changes nothing in the received doc. How inlarge the document so that it will be readable at the other end when it is received?

  You don't have to mention what scanner you use. In all cases, refer to the documentation that accompanies it, or check with their support staff.