CHKDSK C: /f /r will not start.
I tried to run CHKDSK C: /f /r on my computer without success. I made the request to perform this audit under the command prompt as I have for a long time. Then I restarted my computer and it flashed a message on the screen so fast that I can only read the first sentence of the screen... "cannot open volume for direct access. etc - the part that I can't read). I tried to restart my computer three times and I see the same message each time that tries to run CHKDSK C:/f/r. What should I do to get CHKDSK C: /f /r to work normally?
Thanks for your help.
I. M. learning
It is good to know that your drive is in good health.
I guess you mean kmxstart.sys. If your AV program allow you to use your PC correctly (and you get a solution of their support), I'd say it's time to use another program AV. I went to the free version of Avira AntiVir.
Tags: Windows
Similar Questions
-
Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. It looks like all the files are well intact on the disk.
What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk? I entered the following in the "x:\Sources >" prompt:
start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.
When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'. How am I supposed to have access to remove the patch? Am I missing something? Perhaps a switch in the syntax to access? Help, please. Thank you.
I tried both options that you recommended. As initially stated, no boot option would produce something other than the black screen. I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.
An update, the computer is now fixed. Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start. I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors. That's when I posted the question above after trying to remove the patch in the manner described above. After some time and frustration, I decided to run chkdsk /r c:. It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished. Once I restarted from that, everything came and went very well.
So, the original question remains, what was missing in the command to run pkgmgr/high: successfully. And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually? It would be good to know for the future. Thank you!
-
All the ' * .exe ' programs will not start by simply clicking on the shortcut icon. I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". "" It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?
Hello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
MALWARE IS STILL PRESENT).You can try a repair install or an upgrade in Place.
You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html=======================================
For extreme cases:
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.Microsoft support - Virus and Security Solution Center
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?
Hi JohnHorky,
Step 1:
First check and make sure that all physical connections on the computer are correct.
Step 2:
Alternatively, you can try to run a Checkdisk and check.
a. Insert the installation disc.
b. restart your computer.
c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.
d. choose your language settings, and then click Next.
e. in the System Recovery Options menu, click command prompt
f. at a command prompt, type the following command and press ENTER
Chkdsk /f /r X: (drive letter)
Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.
g. press y when you are prompted to check the drive the next time the system restarts.
h. close all applications and restart the computer.
Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.
Step 3:
Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.
I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.
Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Hope this information is useful.
-
Pane Windows will not start! Help please!
I have no idea what exactly happened, but my sidebar will not start. I try to click on it through programs and all he will say is that this windows sidebar has stopped working. a problem caused the blocking of the work programme. Windows will close the program and notify you if a solution is available. I get the same message every time I try to click on run as administrator. I tried so many things, but nothing seems to work. Is it possible that I could reinstall or something? It has been so frustrating. Help!
Hello
If you have tried all THE above so it looks like you have a corrupted profile.
Try these to erase corruption and missing/damaged file system repair or replacement.
1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/9282283. then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then do-, use the hidden administrator account for the lowering your user account (the lowest level)
APPLY/OK, then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. To do this
a couple of times. Do the same for other accounts that may be difficult. Then, if necessary, you
can also reset your password in the accounts. Do not forget to leave your account administrator
and others to the desired level.Make another Admin account with your password and use it to fix the others if necessary.
(just to fix it with, do not use regular account, a safety valve) Always keep a spare part
ADMIN account.DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlYou can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you can't access your old account that you need then you can always use an Admin to migrate
towards a new (remember to always leave an Admin account that is not used except for a test
and fix).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxHope this helps
Rob - bicycle - Mark Twain said it is good.
-
Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday
Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?
-
G5 will not start. LED light on. Fans before working.
Early 2005 G5. running 10.5.8.
G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.
Sam
Some of the fundamental things include the pram/clock battery replacement
since they may be dead; then with a power failure, sometimes the Mac
do not restart. Usual power management unit & reset NVRAM/PRAM are
methods that sometimes also used as a troubleshooting measure.
• Reset the Mac chip power management: (see SMU)
http://www.thexlab.com/FAQs/resetpmchip.html
• How to reset NVRAM-LANDAU on your Mac - Apple Support
A hard reset can sometimes be used, where the power is disconnected
the logic board and power removed from grill; Then push the Start button / stop.
(But maybe not. Several PowerMac computers, I had, some people found this helpful)
You may also remove and reposition cards and other items
the inside of the case, to be sure they are connected properly. Be sure to not
In short anything, due to the static load or residual power in the circuits.
The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.
can help to put it on again. Also sometimes the power supply has some faulty fans,
circuits or capacitors, so they can be troublesome to repair or replace.
Good luck in this case!
-
Firefox will not start after update
Firefox will not start today. I think he had an update yesterday.
Click it, lift the loading symbol, but never implemented. In Task Manager it is a firefox.exe * 32 running. Have you tried to uninstall, delete Mozilla Firefox folder in Program Files x 86 iti also tried to suppress the appdata profile (after saving the Favorites and passwords). I can't even boot up in firefox safe mode and can not get to start Profile Manager. If I start (7 x 64) of windows in safe mode, I can start firefox. I use Norton Internet Security. I checked the settings of firewall smart and experienced of firefox is still set to allow. I tried starting firefox with smart firewall turned off and firefox still refuses to start
Renounce top almost readyHello ziggy1, as this can sometimes be caused by a malware active on a system, please run a scan with tools of different security like the free version of malwarebytes, the adwcleaner and the scan to microsoft security.
-
Carillon of boot loop - start 2011 MBP will not start.
I have a start 2011 15 "MBPro8, 2
Quad Core Intel Core i7
2.30 GHz
Boot ROM version: MBP81.88Z.0047.B2A.1506082204
Intel HD Graphics 3000 VRAM:512 MB
AMD Radeon HD 6750M VRAM:1 GB
8 GB of RAM 1333 MHz DIMM0
It will not start. Trying to start the machine, it enters a loop-
1. startup chime
2. grey screen with Apple
3. the small wheel starts to turn under the Apple
4. the screen goes black
... and the cycle starts over.
The computer does not start in Mode safe. In an attempt to safe mode the loop above has the addition:
3. a progress bar is displayed but does not progress.
I have reset the PRAM
It will start up in target Mode, so I was able to recover data
In target Mode, I was able to run first aid utility on the drive. This has not fixed the problem.
I can hold down the Option key and see Macintosh HD and the recovery Partition. If I try to boot from the recovery partition, I get the same loop.
I can start in the Test of online material, which revealed no material problems
I can boot in Verbose mode and it always happens in the same place
Execution fsck_hfs (version 226.1.1 of hfs)
BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory
' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?
Other thoughts?
Check Google for this error, it seems to be common.
Apparently the startup configuration file is corrupted. These 2 articles can be useful:
http://www.Hackintosh.computer/?p=67
https://www.iFixit.com/answers/view/192201/unable+to+open+-var-db-BootCache.play list % 3A + 2
-
Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.
Thanks Jerri
If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:
https://support.Apple.com/en-us/HT201462
Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port. If the HARD drive is recognized, you can copy the data out of it.
Ciao.
-
Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
Tried running firefox.exe Pei but error message:XML parsing error: the undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line 18, column 1:
"< dialog < =" "^ =" "p =" "> < / dialogue >Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.
Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)
-
Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.
Sorted now
-
Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?
It would be helpful to post what the screen says.
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
https://support.Apple.com/en-us/HT204904
-If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.
-
Why can't I download apps? It remains on "buffer" / operation circle and will not start download
See if the Restrictions are enabled > usage on your iPhone Restrictions
If it is not a question of Restrictions, it could be a problem with the network settings on your iPhone.
Tap settings > general > reset > reset network settings
You will need to re enter your Wi - Fi password. Tap Settings > Wi - Fi
Then try to download apps.
-
Recovery disk will not start on Satellite 1110
I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.
So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.
I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.
Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.
Anyone here knows a remedy to this problem?
(NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)
I am in the United Kingdom, and is a UK machine if that makes a difference.
Hello Micha
Is this your ODD works properly with the operating system?
I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.
Maybe you are looking for
-
CTRL + F 'Find' is disabled on my Firefox 34. How do I get it back?
CTRL-F ("find") in the Edit menu is disabled (i.e., "grayed out"). How do I get that back so I can search in a page? It would also be nice to have the function of status bar that brings back too.
-
Pavilion a6700y: connection for external antenna
I managed to disconnect the external antenna adapter cable wireless when cleaning the computer. It seems that there may be two possible locations to reconnect the wire (it looks like a big boost on the connector at the end of the antenna) to the adap
-
My Qosmio F60 graphics card crashes often
Hi guys. Hoping for some advice/corrections. I now have a F60 for about three weeks.The thing is great with the exception of a significant drawbacks. The screen will either sometimes go to pieces then turn black and then turns back on nothing similar
-
I have a simple problem, but I do not know how to solve. I need to wait in a loop until I get a specific CAN frame of the unit I tested. The framework has no field data, so I can't specify a signal name. I tried to use playback XNET 'Frame CAN' and I
-
No sound on Windows Home Premium
I installed Windows Vista Home Premium a few hours ago. After that, I installed my driver. However, I do not get sound. So, I did the following: 1 / checked to mute or not, but nothing has been put on mute.2 / check if the volume is down, but volume