Code of createjs equivalent to the keyboard flash snippet

Similar Questions

• Portege M300: orange light flashes after spill coffee on the keyboard

  My friend got a M300 and hes recently was smart enough to reverse half a cup of coffee on his laptop keyboard. The first thing is that the laptop power not on at all even when plugged so it might be possible to defects. The weird thing is that the orange light for the socket ((deuxieme left) continues to blink slowly to me - any ideas on what this could mean?

  I havn't tried to clean the keyboard yet due to lack of a small enough screwdriver to unscrew, but because the laptop does not in any case, I think that the problem may be bigger than that. Is that what I can do with him or is it just a case of having to buy a new computer laptop coffee becaue is not covered by the warranty lol

  Any help would be appreciated, thanks J

  Hello

  I agree with Miro.
  The must be something wrong with the hardware. Code bilking isn't always the same. The orange light flashes different for different dysfunctions.
  The Toshiba service partner can read this code and then can give you a good answer on the blackout.

• I updated Firefox to 21,0 may 24. And yesterday, I upgraded to Shockware Flash, Silverlight plugin and Java Dev Kit. Today, the keyboard is irresponsible.

  Update Firefox to 21,0 may 24
  Shockware Flash for 11.7.700.202 update
  Updated Silverlight plugin 5.1.10411.0
  Dev ToolKit Java Update 6.0.270.7
  Update of Java (TM) Platform SE 6 U27 to 6.0.270.7

  After that all the update, today morning when I opened firefox, the keyboard is irresponsible Firefox only. His work very well with other applications.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• illumination of the keyboard 15 HP omen is not on or flashes once and does not remain

  The keyboard light is not on.  I tried turning on via the control of HP OMEN and when I do it just flashes once and then is off again.  It was going fine until I updated the BIOS now.

  It's an easy fix.  Hold down the "fn" key and press "f5".  This allows to switch the illumination of the keyboard on and outside.

• Tecra A4: F10 buttons flash, then the keyboard does not work

  Dear Toshiba support,

  After having traveled often with my laptop Toshiba Tecra A4, the F10 key flashes, some keys don't work and a pop-up said that you hold down CTRL when I'm not.

  I don't know if the keyboard needs replacing or the card mother of m.
  It's a laptop wonderful workaholic, if prefer to fix, but do not know if it is a repair of Office of the keyboard or the mother.

  Everyone knows similar and can suggest a remedy?
  All the tips and suggestions appreciated.

  See you soon,.
  Colin.

  Hello

  Have you tried to press CTRL once more to see if you can disable this?

  To be honest it of not easy to say what might affect the functionality of the keyboard but it might be possible that the keyboard starts to failures

  In this case it is sufficient to replace the keyboard.

  But the fact is that it is only a hypothesis.
  Maybe it's better to check the old s first keyboard (it's a work of technician) before buying a new.

• Bluetooth mobile keyboard 6000 cannot match in windows 7 - I get a pairing code, but the keyboard does not meet the entry

  the keyboard connect Windows XP very well, but after the upgrade to Windows 7, I am unable to pair. I can generate a pairing code, but the keyboard does not respond. Suggestions?

  Hi Amberlina,

  This problem may be caused by damaged or incompatible drivers. I suggest you to consult the help articles and check if it helps.

  Troubleshooting: keyboards

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/keyboard/wireless-Bluetooth

  I can't get my device to pair with my computer.

  http://www.Microsoft.com/hardware/Bluetooth/en-us/default.mspx

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• slide show by using the keys on the keyboard for nav in flash professional CS5 with animated images

  recently, I discovered how to create a slideshow using the keys on the keyboard for the market front and rear in flash professional CS5 thanks entirely to kglad of this forum. I used still images for each slide, since, then with one of the slides, I added a slight undulation of water in one of the images in a separate document. is it possible to include this file in my slideshow now?

  original questions and answers using still pictures below

  I'm a graphic designer who has a presentation of my portfolio. I'm not too experienced in flash and do not use it much, but he needs to do this on the thing. I can do a fade in and out slide show, but I want to create a slide show where the screen remains out of the blade and does ' t until what I press the next or previous button. I don't want these keys on the screen, I want to be able to press a key on the keyboard as F1. is this possible and do you know in adobe flash Professional (or other adobe products) where I could get resources/tutorials to do. Any help so what would never be great.

  response

  create tweens to fade for each slide.  You'll probably want to fade out the image on image 1 (from frames 1 to 11).  Bland-in the image of frame 11 frame 1 to 11.  fade the image frame 11 11 to 21 etc.

  You can then use:

  var image: int = 1;

  var dir:uint;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, downF);

  function downF(e:KeyboardEvent):void {}

  {if(e.keycode==Keyboard.Left)}

  dir = Keyboard.LEFT

  Frame = Math.Max (Frame-10, 1);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  } else {if(e.keyCode==Keyboard.RIGHT)

  dir = Keyboard.RIGHT;

  Frame = Math.min (this.totalFrames, Frame + 10);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  }

  }

  function nextF(e:Event):void {}

  {if(dir==Keyboard.Left)}

  prevFrame();

  } else {}

  nextFrame();

  }

  {if(this.currentFrame==Frame)}

  this.removeEventListener (Event.ENTER_FRAME, nextF);

  }

  }

  you have the fla that created the swf file?

  If so, just copy images from this fla and paste into a new movieclip in your fla slideshow.  Add this movieclip to your timeline.

• I bought after effects CC from the Adobe website. The screen flashed a messaged saying "your request". I have not received an email from Adobe yet with an activation code. When I check my account it says I have no purchase. Not sure

  I bought after effects CC from the Adobe website. The screen flashed a messaged saying "your request". I have not received an email from Adobe yet with an activation code. When I check my account it says I have no purchase. Don't know what to do next.

  Hello

  Please see the following links:

  Manage your creative cloud membership

  If you still need help please contact support: contact customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Let us know if that helps.

  Kind regards

  BANI

• slide show by using the keys on the keyboard for before back in flash professional CS5

  I'm a graphic designer who has a presentation of my portfolio. I'm not too experienced in flash and do not use it much, but he needs to do this on the thing. I can do a fade in and out slide show, but I want to create a slide show where the screen remains out of the blade and does ' t until what I press the next or previous button. I don't want these keys on the screen, I want to be able to press a key on the keyboard as F1. is this possible and do you know in adobe flash Professional (or other adobe products) where I could get resources/tutorials to do. Any help so what would never be great.

  the best way to do what you want (but not the most flexible/changeable) would be to add each slide a key frame to its own layer.  It is a design decision, but start with keyframes at 1, 11, 21 etc.

  create tweens to fade for each slide.  You'll probably want to fade out the image on image 1 (from frames 1 to 11).  Bland-in the image of frame 11 frame 1 to 11.  fade the image frame 11 11 to 21 etc.

  You can then use:

  var image: int = 1;

  var dir:uint;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, downF);

  function downF(e:KeyboardEvent):void {}

  {if(e.keycode==Keyboard.Left)}

  dir = Keyboard.LEFT

  Frame = Math.Max (Frame-10, 1);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  } else {if(e.keyCode==Keyboard.RIGHT)

  dir = Keyboard.RIGHT;

  Frame = Math.min (this.totalFrames, Frame + 10);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  }

  }

  function nextF(e:Event):void {}

  {if(dir==Keyboard.Left)}

  prevFrame();

  } else {}

  nextFrame();

  }

  {if(this.currentFrame==Frame)}

  this.removeEventListener (Event.ENTER_FRAME, nextF);

  }

  }

• No response from the keyboard and mouse to the Windows logon.

  Hello, I had this problem a while but a restore fixed it, and of course it happened recently that I want to challenge results.
  Basically, my mouse and my keyboard do not respond before Windows logon.
  Opening height of session does not either.
  The keyboard and mouse seem to work if I go into the conservation program (ESC key at startup and F11).

  I'm running Windows 7 on an HPG60 laptop 64-bit with 3 GB of RAM.
  Processor: Intel (r) Celeron (r) CPU
  900 to 2.20 GHz 2.19 Ghz

  My mouse is actually a touchpad - Synaptics PS/2 Port TouchPad.
  My keyboard is attached to laptop Standard 101/102 - key or Microsoft Natural Keyboard PS/2 with HP QLB.
      
  I need help as SOON as possible so that I can get back to work.

  -Albert

  This is equivalent to the old rule of iron of computing: If you have important files on your PC, then you need to back up an external medium regularly. Problem request not do or wait until you have a major problem. Fortunately, Windows 7 gives you a loop hole. Here's how it works:
  1. get a disk external 2.5 "in a USB case.
  2. connect it to the PC.
  3. set your BIOS so that it uses the DVD drive as its primary boot device.
  4. start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
  5. press a button if you are prompted to start from the DVD.
  6. When prompted, select "Safe Mode Command Prompt".
  7. connect as administrator if you are prompted.
  8. Select repair when prompted.
  9. Select command prompt.
  10. save your files or folders on the external USB drive (or a flash drive).
  If you are not familiar with the commands of copy in the command line environment, ask a friend gifted in computer science to help you.

  After solving the problem of keyboard and mouse, do you a favor and use the USB disk as backup media. On a regular basis.

• Can I have a single function and variable with createjs names when publsihing of Flash?

  Hey everybody!

  I recently started to use the Toolbox for exporting CreateJS to turn the little button icon animations, done in Flash, content for HTML5. I created 3 files of ".fla" separate icon that animate when spilled.

  With that tag added in my html5 document example, animation works very well:

  < canvas id = "about_btn" width = "85" height = "70" style = "background-color: #FFF" > < / canvas >

  However, once I added several canvas tags, only one icon would be on screen:

  < canvas id = "about_btn" width = "85" height = "70" style = "background-color: #FFF" > < / canvas >

  < canvas id = "news_btn" width = "85" height = "70" style = "background-color: #FFF" > < / canvas >

  < canvas id = "contact_btn" width = "85" height = "70" style = "background-color: #FFF" > < / canvas >

  I discovered that the JavaScript files generated with each 'FLA' file were opposed because they were all using the same variable and function names (Stadium of the exodus, canvas, init(), etc.). Is it possible for me to publish the JavaScript of Flash code with variable and function names specific document? (e.g. about_stage, about_canvas, about_init())

  A work around methood I currently using puts each < canvas > tag in its own iFrame.

  Thanks again for the help!

  -DJ

  Asset JS libraries shouldn't conflict between them, unless there are symbols with the same name. Even in this case, you can change the names of symbols for each FLA avoid collisions.

  Looks like you are trying to copy and paste the code on the HTML preview. It is not really designed for it, and this will lead to collisions of names. You want to rewrite this logic in your own HTML code (code overview using as reference), or rename the variables as appropriate, after you copy and paste.

  Best,

  Concession.

• Problem starting Portege 7200 - stops running and the light flashes

  I have a portege 7200 with the docker dock 2 dvd, no problems until this weekend, when it stopped starting.

  its plugged into the power outlet and it starts the first windows 98 after the screen time, works my virus checker then the screen goes black, computer stops and the led on flashes.

  ive tried to boot from a CD, using the battery, reinstall windows, all I can think about

  Thanks for your help.

  Hello

  Have you tried to run the notebook without the docking station?
  If this isn't the case, then try it.
  Also, try to remove the battery for a while. Then try to start the unit only with the power adapter.

  But generally, if the LED flashes then this means that there is a hardware malfunction.
  The flash code can only be read by the authorized service partner. Guys are able to find the hardware failure.
  Well well, in this case, if the procedures described above don? help I recommend you contact Toshiba service partner in your country.

  Good luck

• Qosmio X 770-key malfunction - Mute instead of lighting on the keyboard

  Hello everyone

  My Qosmio X 770 - 13 c drives me crazy, let me explain:
  When I want to use the light of the keyboard that makes silent sound and I don't understand why.
  The FN key only works when I have reactive flash cards.
  All my drivers and BIOS are up-to-date. What should do?

  Somehow I think that caused this last update of Windows.
  Thanks in advance for your answers

  + The message was edited: assignment has been translated.

  Multimedia keys are controlled by Toshiba, additional package.
  Visit the page of the Toshiba UE driver and download the last PPV.
  Now uninstall the installed VAP.
  Reboot the laptop.
  Install the new downloaded VAP

  Welcome them

• Whenever I type the letter between f and h (he can't come in here or the problem occurs, so I will use 'p' instead), the locking of the keyboard and an informal search screen is displayed in the toolbar. Also happeninp in emails and 'my documents' but no

  I can't use a certain letter on my keyboard when in Firefox, email or my documents without the Freezin' screen and a pop up appears in my toolbar for a brousin site. The character I can not type is the letter between f and h in the alphabet. I have no problem with this letter in other applications, so I know that's not the keyboard. How to make and use this letter?

  This has happened

  Don't know how many times

  Is a week by o

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• How to exit a mode of overlay of the keyboard on Satellite Pro A200?

  As of recently I noticed that my keyboard shortcuts stopped working, that is, rather than the work of combination Fn + F # except Fn + F10 and Fn + F11 which access the cursor control keys and numeric keypad, respectively.
  Also, just by holding Fn I apparently temporary digital keypad mode (However, before, when everything was working, just keep the Fn done this little bar feature at the top of the screen keys appear).
  So I think that my computer is still in some 'keyboard overlay mode' and that's why only Fn + F10 and Fn + F1 combinations work and nothing else. I really need to get back the use of other combinations of keys Fn + F # if I appreciate any help anyone could give me this.
  Thank you!

  The lights are activated under the F10 and F11 keys?
  If so, turn it off by pressing the FN + F10 or FN + F11

  But first, it would be very useful to know that OS you installed or do you use?
  Are you using Vista?

  Well, in this case, you should try to reinstall the TOSHIBA components common driver, then the TOSHIBA Flash Cards. Flash cards provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.

  The two drivers are located in the package Toshiba added value on the European driver Toshiba page.