Codename: Panzers Phase two - runs on Windows 7 Home Premium 64-bit?

Similar Questions

• Can't Command and Conquer Generals to run on windows 7 home premium 64-bit

  I install the game and the installation went well but then when I try to load the game, it gets the second loading screen and freezes, then comes up with a message saying: Sorry, that a serious error has occurred, and then I have to close the program. someone at - it ideas? This game is supposed to be compatible with windows 7 64 bit!

  Hello

  Could you please answer these money questions?

  one) tell us you receive the exact error message?

  (b) do you have the latest changes the software on your computer?

  (c) don't update you the latest drivers for your graphics card?

  To resolve this problem, try troubleshooting this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.

  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:

  Clean clean boot.

  1. click on start, type msconfig in the search box and press ENTER.

  The user account control permission.

  If you are prompted for an administrator password or confirmation, type

  password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load starting points.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the problem persists, then you must update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, locate the device, and then double-click the device name.

  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Replacement of motherboard on PC HP Media Center under Windows Vista Home Premium (32 bit)

  On a HP Pavilion Media Center m8226x desktop PC is running OEM Windows Vista Home Premium (32 bit) version.  Replacing motherboard ASUS M2N68 - motherboard HP Narra2-GL8E 6150SE with a card mother MCP61PM-HM (Nettle2) due to the failure.  The two boards have same chipset and form factor.  Can I just replace the Board of Directors without having to reinstall windows?  Do I need to install new drivers?  I do not have a CD installation or installation key, Microsoft would provide a key if necessary?  Is there a link I can reference for replacement MB / install?

  Thanks for you help!

  HC

  OEM license is linked to the original version of the motherboard, it is M2N68 - LA. You lose OEM 'rights' when you have changed the Council.

• Replaced motherboard on HP PC Windows Vista Home Premium (32 bit)

  On a HP Pavilion Media Center m8226x desktop PC is running OEM Windows Vista Home Premium (32 bit) version.  Replacing motherboard ASUS M2N68 - motherboard HP Narra2-GL8E 6150SE with a card mother MCP61PM-HM (Nettle2) due to the failure.  The two boards have same chipset and form factor.  Can I just replace the Board of Directors without having to reinstall windows?  Do I need to install new drivers?  I do not have a CD installation or installation key, Microsoft would provide a key if necessary?  Is there a link I can reference for replacement MB / install?

  Thanks for you help!

  HC

  You pay with the exchange for motherboards.

  1. you normally have to reinstall the OS after changing motherboards (different drivers)

  2 Microsoft won't provide a new product key.

  3. you can try explainging what you do.

  4. 'How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Initpki.dll missing on Windows Vista Home Premium 64-bit. How to solve this problem?

  I'm running on Windows Vista Home Premium 64-bit. I tried to sign in to Windows Live Messenger and the Code error 80048820. I'm not able to check on my Windows Update as well. I finally discovered Miss me my files initpki.dll, checked on C:\Windows\System32 already. What should I do?

  Hello

  • What happens when you try to install Windows Update?
  • What error is it receives?
  • How did you find that the file 'initpki.dll '?

  I suggest you to reset the windows udate component. Do follow link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  And due to Windows Live Messenger, visit the link below to find a community that will provide the best support.
   
  http://www.windowslivehelp.com/
   
  Kind regards
   
  Ramata Thakur.

• MS Office teacher & 2002 edition will run on windows 7 Home Premium?

  My existing operating system is MS Windows XP Home Edition Version 2002 Service Pack 3. It also has MS Office teacher & edition 2002, everything that I want to keep (I have yet 2 licenses for the software).
  My question is I am about to buy a new Dell with Windows 7 Home Premium (64 bit) laptop and I'm not sure whether or not she will run the software MS Office student & teacher 2002 above. Will it take for the new laptop currently on the order of upgrade to Windows 7 Professional because it has XP mode which is not Windows 7 Home Premium?

  Technophobemad,
  You need to go to Windows 7 Ultimate to use Office 2003.  It is fully compatible with Windows 7 64 bit.
  Windows 7 Compatibility Center

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. Or running fixit is. How updated?

  I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. \niehter is running thing fixit. How updated?

  Hi Vishal,

  1. what happens when you try to install Windows Update and the fix, you get any error message or error code?

  2 have you made changes on the computer before this problem?

  3 is the limited issue during the installation of specific updates?

  Problem when installing windows update, see the following Microsoft article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602

  
  Notes:

  The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Microsoft safety scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Keep us informed on the status of the issue.

• Windows 7 Home Premium 64 Bit and my DirectX diagnostic tool says that my current version is DirectX 11, but when I try to run space engineers, it tells me that I need to run DirectX 11

  * Original title: DirectX and space engineers

  Hello, I am running Windows 7 Home Premium 64 Bit and my diagnosis tool DirectX says that my current version is DirectX 11, but when I try to run space engineers and use a world with planets, he tells me that I need to run DirectX 11. When I go to my DirectX folder, it says that I am running DirectX 9.0, I'm very confused and internet only helped me at all up to this point. All suggestions/help and help will be greatly appreciated.

  Well, is it not a strange ball game? Minimum = DX9 and DX11 for planets.

  Looks like no shore leave for you then... :)

  "NOTE: the minimum requirements are enough to run the game, but without the global functions,

  which requires DirectX 11. »

  "When I go into my file DirectX it tells me that I'm running DirectX 9.0"

  Direct X folder?

  Win7 has DX9, 10 & 11. However, older graphics cards are not be able to use DX11 (or DX10 if old enough).

  It comes to graphics cards which are older than AMD HD 5000 (version ' 09) and Nvidia GTX 400 (exit 10) series.

  EDIT: This also applies to the older map HD4000 Intel integrated graphics (Inc., HD3000, and all the "GMA" graphic integrated).

  ----------------------

  -Here is a list of the .dll Direct X files you when files are updated.
  There are more files DX (Xinput and audio), but these are most of the graphs related to Direct X .dll

  Go to Windows / System 32 folder (and SysWOW64 if you have 64-bit).
  -They are in alphabetical order and begin by d3dx9_24.dll > 43. Then d3dx10 - 33 43 >
  . & Finally d3dx11 - 42 43 >.
  It should also be--d3d9, d3d10 and d3d11. These come before the D3Dcompilers - 33 > 43.

  If all of these files is missing update Direct X using the DX Web Installer.

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  Sometimes, a file is corrupt (mainly by games always reinstall DX unnecessarily). I have this case

  DX must be reinstalled using the full DirectX redist (June 2010) -

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• Problem running windows 10 to date for windows 7 Home premium 64-bit reference error code 08C 1800103 - 089002

  Problem running windows 10 to date for windows 7 Home premium 64-bit reference error code 08C 1800103 - 089002

  Could not update windows 7 Home premium service pack 1 for windows 10.

  I tried windows update. all updates are installed except win 10 update that comes up with unexpected error

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Hello, I currently windows 7 Home premium 64-bit running on my laptop, can I install windows 7 ultimate 32 bit over this as an upgrade? I have the ultimate disc then, how do I use it? Thank you, Mark.

  I am running windows 7 Home premium 64 bit on my laptop. I have a disc of windows 7 ultimate 32 bit, is it possible to upgrade to the ultimate disk, if so, how, if not how do I use the ultimate disc? Thank you very much, Mark.

  No, you can't, but if its Windows 7 Ultimate you want, simply use the Windows 7 Ultimate product key to upgrade Windows 7 Home Premium to Windows 7 Ultimate using Anytime Upgrade.

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

  Cases of failure to upgrade Express:

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Windows 7 Home Premium 64 bit won't let me run older 32-bit games?

  I've upgraded to Windows 7 Home Premium 64-bit.  Now, I can't run my old 32-bit games.  Can I download a 32-bit program, or do I have to buy another version of Windows 7 Home Premium 32 bit support?

  Its possible there is some compatibility issues with Windows 7 64-bit and older games.

  You can try compatibility mode:

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Software:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  If this does not work, you might want to consider purchasing a license for 32 bit Windows 7 Home Premium and dual boot with Windows 7 64 - bit in order to be able to run older games:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• Why Windows Vista Home Premium 32-bit installs not Windows updates?

  I am not able to download and install Windows Vista Home Premium 32 bit windows update.  This Gateway laptop has always been able to quickly and easily install the update by clicking windows update.  However, since the introduction of Windows 10 it has been a lot of your time trying to install updates.  I had this same problem with Windows 7 too.  Never before there was no problem for the two operating systems.  Installation of Windows updates has always been easy and fast without any problem.  Running the troubleshooting isn't good and hunting error codes has been unproductive.  What the hell is happening?

  Hi Joe Cool1:

  'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems.  The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.

  There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista.  The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.

  You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/.  Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.

  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• 11 GR 2 64 bit on windows 7 home Premium 64-bit

  Did anyone installed 11 GR 2 64 bit on windows 7 home Premium 64-bit.
  If so pls provide me with step by step processes for her...

  Hello
  I installed oracle 11 GR 1 32-bit material on windows 7 Ultimate X 64, I used it for a telecom program design and planning.
  Everything was fine and I used two of them for the first time, but when I stop my laptop and run it again. My syestm was stuck and I coulndt do anything even wifi not working do not.
  So in safe mode, I just removed oracle then was normal. I need Oracle for the execution of another program.
  Someone could please guide me for correct installation, maybe I forgot to check an option or doing something worng.
  [email protected]

  BR / / hocine

  Edited by: 890461 October 10, 2011 02:53

• Windows 7 Home Premium 64-bit Danish

  Hello

  I want to format my PC and found out that it is legal to download an online version of Windows if you have a CD - key legal. I have a CD - key legal, but I need a copy of Windows 7 Home Premium 64 - bit in Danish. So far I've been able to find it in other languages but not Danish. Is there anyway to find this online version?

  My restore partition does not work, so I can't create the recovery of my own DVDs.

  Hello:

  1. download the Windows 7 Pro x 64 Danish on the link below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  2. follow this guide to remove the ei.cfg file in order to obtain all versions of W7, and then either create a flashdrive bootable using win to Flash, or a bootable DVD using Imageburn (these two methods appear in the instructions).

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3827.2-1-4-deleting-the-EI-cfg-file-to-obtain-all-versions.aspx

  You can also see if you can buy recovery discs for your PC on the link below:

  http://www.best2serve.com/page/rcd_landing

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.