communication of 64-bit application with 32-bit application on a PC?

Similar Questions

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick

• Where can I get windows controller PCI simple communication 8 64-bit drivers for HP 4530 s pro

  I installed 8 64-bit windows on my HP probook (original came with a linux) 4530 s and everything is good, but for the yellow in the Device Manager "PCI simple communication controller. The hardware ID are:

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_167C103C & REV_04
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_167C103C
  PCI\VEN_8086 & DEV_1C3A & CC_078000
  PCI\VEN_8086 & DEV_1C3A & CC_0780

  Help, please!

  It's Intel Management Engine Interface.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-111348-1

• Community port-a-thon - error with applications accepted/releases

  Hello

  I've had a few requests of BB10 prepared during AllAboard port-a-thon, apps have been accepted, and I got information about the awards.

  Later, I have prepared something new (I improved the UI) and I downloaded the new versions. My problem is that I downloaded last weekend, in the community of port-a-thon. So, yesterday, I received by e-mail with the information that I get rewards of money for my 3 options for use. But it was just a new version, not a new application! I was even not recorded for the ptt community - I have had no new apps so I is not registered myself.

  I think it's unfair, I would ask RIM to stop my payment process for the port-o-thon community (for 3 apps).

   

  BTW: I know not if it is the error of someone or a bug in their system - if it's bug, someone can use it to get money just for new versions.

  I don't know the RIM email where I should send it this information, so for now I send him here, meybe a RIM person find.

  Thanks for reporting this.  I have to inform the owners of program which will focus on this.

• Communication problem 6210 hardware DAQ with DAQmx 9.2.3 (Err 88302)

  I would use NEITHER-USB-6210 with DIAdem 11.1 under Win 7 Home Premium. DAQmx software and supplied drivers are version 8.6, but does not support this DIAdem 11.1 (DAC-NOR-DAQ interface did not show any existing signal). So I decided to update software DAQmx on latest version 9.2.3 which should solve this problem. After installation, all previous configuration items, MAX moved well and DIAdem DAC block indicated all signals with success but start of acquisition and measurement is impossible since. After firmwareloader establishes the material connection seems to be running, but any attempt to transfer data or start any function Max raises failurie event-88302 "an internal error has occurred." Anyone help me please?

  Dear Mr. Varga,

  After that the PC was clean from previous installed everywhere DAQ and new installation repeated once more, problem has been resolved and now the system is fully capable to work with DIAdem, as well as with the Net. request.

  Kind regards

  Milos Riha

• Communication problems scanner Canon MP610 with laptop

  I have a Canon MP610 all in one printer, connected to a Dell laptop connected via a netgear wireless router and a Dell PC.

  The MP610 runs perfectly with the PC, and I am able to print from the laptop, but when I try to scan from the laptop using the program 'Publisher '.

  I get a notice stating "cannot communicate with scanner.

  Hello

  (1) what happens when you connect the scanner to a different USB port?

  (2) is the device-specific question?

  (3) what version of Windows operating system do you use?

  You can try the following methods and check the status of the issue.

  Method 1:

  Try the procedure described below suggested article Canon.

  Error message: "cannot communicate with scanner."

  http://support-SG.Canon-Asia.com/contents/SG/en/8100065300.html

  Method 2:

  Configure the computer to clean start State to check software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.

  You can also post you question under support of Canon for help.

  http://www.USA.Canon.com/Cusa/support/consumer

• Communication issues in Windows 7 with the XBOX 360

  I also have the problem of my windows premium 7, refusing to talk to my xbox 360...< not="" the="" controller's..="" it="" talks="" to="" them="" fine="">

  But the Xbox itself on the other side ot the network...

  So please don't tell me to install controller drivers...

  Really do not do...

  Yes, I've read hundreds of times people have asked this very question.

  To always have the microlimp people answer with «just install the controller driver and everything'll be fine...»  You want a pill with this useless response? »

  My very expensive windows 7 gaming machine speaks to everything perfectly. Everything there is certified to work with windows... Nothing is no name made in China...

  And apparently the xbox slim is certified...

  Then why they will not speak to each other...

  The windows updates did not have a pilot.

  I tried the controller driver... It did not help at all...

  So please don't just tell me to install the controller driver...

  And maybe think about why we shouldn't just scrap xbox and get a media center that works?

  Hell I already used my Roku as well as the xbox...

  He and my windows machine 7 talk to each other with happiness...

  Original title: windows 7 driver driver to talk to an xbox 360.  Do not use the controller with a windows machine...

  Hello

  Thanks for the update on the issue. The query you requested is best suited to be posted on the Xbox forum. He is watched by other computing professionals who would be more likely to help you.

  Forum on the Xbox:

  http://forums.Xbox.com/xbox_forums/default.aspx

  Hope this information was useful.

• BlackBerry Support Community Forums BlackBerry Smartphones application?

  Hi I was wondering is it an official/unofficial app for the Support of BlackBerry Community Forums? Thank you!

  No BerryBlab is not supported. Just access the mobile site as directed.

• Communication by internet WiFi modem with wireless router

  I have a WIFI modem by the internet provider. My office is on the other side of the House where there is no internet signal.  Is it possible to get a WiFi router that reads the WiFi signal, which will be the Ethernet Ports, could I link all my computers over printers on the network? If TI available what is the manufactured by. The router will make the fall speed, right now I have a download speed of 350Mbs/s?

  Thank you

  You need to move the router closer to your office or buy a wi - fi Extender and place it in between the router and the desktop.

• HP Compaq DC7700 Small Form Fa: Driver PCI simple communications controller windows 8.1 64-bit

  I can't find the driver for my PCI simple communication controller that is compatible with 8.1 64-bit windows. could someone point me in the right direction (if all goes well a link to the driver I need)? I have already spent a lot of time to research.

  As I wrote above... If automatic installation method does not work, you must manually install the driver.

  Here's how to manually install the driver...

  Go to Device Manager and click the controller of simple communication IBOS who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34743.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• LabVIEW Runtime engine on Windows Embedded Standard 7 P 32 / 64-bit?

  Any who tried never to install and run the LabVIEW Runtime Engine (2011 or later version) on Windows Embedded Standard 7 P 32 / 64-bit?

  I'm trying to figure out if this will work, for example on a CX5120 PC Beckhoff embedded. I have to have some TCP/IP communication simple to exchange information with another PC, but nothing else, i.e. drivers, etc...

  I hope that someone tried to do already. I don't have the right equipment now to check it out.

  As NEITHER sells touchscreens with WES7 installed here: http://sine.ni.com/nips/cds/view/p/lang/en/nid/210551 it's pretty safe to assume that they used the RTE on WES7.

  But yes, it is done.

• No communication with the modem, lack of driver (Vista)

  I am a novice on computer, and I'm tired of trying to get this Vista computer will. No modem/internet. I tried to run the restore disc, but still no luck. It is an Emachines T5088 with a 56K modem, basic Windows Vista Edition and Pentium 4 processor family. took some advice and checked in the Device Manager (in Control Panel of configuration/system), and then click Properties for the PCI simple communication controller (it is marked with a yellow icon) to view the details. It says "the device is not configured correctly (code 1). There is no driver selected for the item or a set of device information. I tried to launch the special "update" disc that comes with it, just in case a missing driver was there. Nothing. When I click on the "Driver" tab, it says no driver has been loaded. When I click on the 'Détails' tab, then click on "Hardware ID" listed in the first line says: PCI\VEN_14F1 & DEV_2F40 & SUBSYS_200014F1 & REV_00 then PCI\VEN_14F1 & DEV_2F40 & SUBSYS_200014F1 and PCI\VEN_14F1 & DEV_2F40 & CC_078000 and last PCI\VEN_14F1 & DEV_2F40 & CC_0780. I know the VEN code means vendor and the code DEV, device. If the seller is 14F1 and the unit is 2F40. Right? I don't have access to the internet on my computer, so I have to look on the computer to Windows XP from my friend and to find the driver I need for Vista... Download it to a flash drive (if I can) then download it on my Vista computer. Problem is, I can't find the driver I need anywhere on the internet. Is it just a bunch of junk, I bought? Or can someone help me? ! I am frustrated beyond.

  Visit the Emachines website, specific to your model and download drivers.
  Then reconfigure MSUpdate to install only the critical updates, do NOT install MS driver updates

• Issue of "PCI simple communications controller" infamous with Acer laptop

  So, in a few words, the computer does not recognize the usb flash drives. On every attempt to connect the device, the sounds "connect device" is played and about 3 our 10 times the "driver installation failed" message from Windows. In Control Panel, area of devices, the flash disk is marked as 'usb 2.0 device' in the category 'unknown '.

  With the help of 3rd party software, the popular "unknown device identifier", "chipset Intel 7 series c216" were found in need of a driver. The WinUSB generic driver always worked perfectly for me on any machine up to now, well well so far, at least, so I install the supplied driver of Intel would be useless because I have not any usb 3.0 devices. I went down of Windows 8 (which was already installed on the computer acquisition) to Windows 7 for personal reasons, the funny thing is that I installed it with a digital copy through the flash disk usb that I try to open right now, by way of conclusion, the fault must be on the software.

  My mouse works perfectly, be connected via a usb port, I even tried with the keyboard that I use for my desktop pc and also works.

  So here are the things I tried and had no results:

  -possibility to install the driver automatically with Windows Update (1st attempt failed to find; 2nd attempt, driver is found BUT access is denied)

  -J' have that maybe if I uninstall the driver from "Device Manager", after a Windows restart should re - automatically installs the driver, but as above the same message "access denied."

  -Downloaded the Intel driver (ME 9: engine management pilot), with the error "failed to install".

  Is there a way to solve the problem of "access denied" so that Windows Update can take care of things? Or am I left with the only option of re - install everything again hoping that everything will work?

  Details:

  Windows 7 x 64

  Laptop model: Acer Aspire E1-531 (link to the form: http://www.acer.co.za/ac/en/ZA/content/model-datasheet/NX.M12EA.009)

  utilities of "driver finder" 3rd party frequently to be wrong and should be avoided, cleaning after a 'bad' driver installed can often lead to problems. You have available restore points?

  The USB 2 driver will be a part of the Chipset Intel package. Re download all the Acer drivers and install their drivers only when possible. Laptop manufacturers often use updated implementations of standard chipsets and their drivers that will take into account.

  Even if you do not use USB 3 devices, you should always install the necessary drivers to allow Windows to correctly list the material. Although the PCI Simple communication driver is often associated with the chipset Intel HECI/AMS-SOIL Management Engine, this device is not listed by Acer. It is also common with an analog modem.

• How to use RMTSHARE to Microsoft Windows Server 2008 R2 Enterprise (64-bit)

  I want to give perm muti user using RMTSHARE.
  I download from http://support.microsoft.com/default.aspx/kb/172599 and run it. But I got an error: not compatible.
  Does anyone have an idea?
  Any point is appreciated!

  Hello

  Welcome to the Microsoft Answers community.

  The question you posted would be better suited to the Of Microsoft TechNet community (which may provide assistance with Windows Server, Windows 7 for the IT professionals).

  Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do I know when a teststand sequence ends with the Simple graphic interface?

  Hello community,

  32-bit Teststand 2014

  32-bit Labview 2015

  I use the version of Labview Teststand user Simple interface.

  Where in the interface can user Simple of Teststand I know when a file sequence is finished running?

  I want to make an event handler when the end of a sequence that will trigger a change in the value of a control.

  Any help would be greatly appreciated.

  Thank you

  Hello

  I believe that the best option for you is with the user interface messages, please refer to this link for more on this topic:

  http://www.NI.com/Tutorial/4532/en/

  Luis G.