No communication with the modem, lack of driver (Vista)

Similar Questions

• My hp c4500 Wireless will not print. Troubleshooting says my printer is not communicating with the router.

  MY hp c4500 wireless printer will not print. Troubleshooting says my printer is not communicating with the wireless router. I've checked everything. Unable to find the answer.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP5520 - an error occurred during communication with the scanner

  A HP5520 for a few months and all were working well. But today does not scan wireless.

  I'm on a Mac OSX 10.9.2 imac and have reinstalled just the last bundle of driver on the HP website but no joy. The HP scanning utility will show the printer in the list, but throws up this error message:

  "HP Photosmart 5520 series-AirPrint is currently unavailable. Please check if it is connected and turned on, or try again later. »

  If I try to connect through system preferences printers and Scanners it throws up to the following error:

  "Year error occurred while communicating with the analytical engine."

  Any ideas?

  Don't worry, I've now solved with a stop down / reboot everything after you have reinstalled the drivers. I think that, maybe, last week cut off was to blame reboot on the mac has rebooted without the scanner is powered and the scan of the computer had not been activated. A restart of the mac corrected it.

• Satellite M30: Cannot use COM with the Modem port

  Hello

  I have a satellite m30. I have problems with the com port to use with the modem. I get an error code saying 12 resources etc. There is no i/o or IRQ conflict IRQ 04 and e/s beach is 03F8 - 03FF. I tried to uninstall various things to free resources, but still the same error.

  Any help would be greatly appreciated.

  This problem when you use the Toshiba Recovery CD?
  Try to disconnect all the external devices and install Windows from the Toshiba restore CD.

  Additional please check several comments here in the forum area Modem. I found several threads with similar issues

• DASYLab is not communicating with the hardware dbk25a3

  Hello:

  I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module.  However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.

  DBK25A3O

  An entry of a module is open.

  Any help is highly appreciated

  Thank you

  Krishna

  The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Connectivity problem - problem with the modem or the router of network

  I had a network with 2 computers.  The main computer was a Windows XP operating system and the secondary is a Windows Vista operating system.  There was a modem connection and the router. Due to a storm and a leak in my ceiling in my main computer got wet and I couldn't use it.  I have connected the modem without the router directly to the secondary computer, but it is not recognize the modem.  "Internet Explorer cannot display the webpage." So I ran the diagnostics and received a message that there could be a problem with the modem or the network router.  I did the thing 'ipconfig' and there is no gateway.  Is there anything I should do to make this secondary computer main computer?

  Hello

  If you use a router there is no primary and secondary, all the computers connected to the router are equal.

  Many Internet service providers allow you to control some form of autehtication (ID, PW) online journal.

  Your router and the computer humid probably were installed to authenticate.

  If the router does not use it.

  Otherwise, contact your ISP and ask for the help of authentication.

  Jack MVP-networking. EZLAN.NET

• Internet Backgammon no work, receive error message: "a network error occurred during communication with the game server.

  Original title: All of a sudden internet backgammon works not

  Just your portable Windows 7 computer base. Everything worked well. Started playing internet backgammon... has won EACH game Yes! Took a break for an hour or so... came back and now have message saying a problem to connect to the internet game server.  Someone knows what's the problem?  What it says is specifically "a network error occurred when communicating with the game server". That the devil which means?

  Hello

   

  1. what browser do you use?

  2 are you facing the same issue with other games like asset stings on the internet?

  I suggest you follow these methods and check.

  Method 1: You can check if the problem appears in a clean boot state.

  Refer to this link: http://support.microsoft.com/kb/929135

  If the problem is solved, check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Temporarily disable the security software and check if the game works very well.

  Refer to this link: turn off the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 3: If the previous step fails, temporarily disable the Windows Firewall and check if the game works very well.

  Refer to this link: turn enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: After checking the functionality enable the Windows Firewall.
   

  I hope this helps!

• Printer Lexmark Pro 901 lose communication with the computer, print intermittently.

  Lexmark Pro 901 lose communication with the printer prints intermittently.  Disconnect, restart, or other ideas proposed by the help of Lexmark window do not work.  Computer's desktop HP with Windows 7 64 bit. Have seen other reports of similar problem.  Any suggestion would be appreciated.

  Hi André,.

  We understand that you are experiencing some problems with Windows 7 on your computer, but don't worry, we will try to help you.

  I suggest you follow the article below and check if it helps to solve this problem.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Do not hesitate to return if you need assistance with windows, we will be happy to help you.

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• 0 x 80041006 "a network occurred when communicating with the game server"

  Today I got this error message when you try to connect to Internet Spades - 0 x 80041006 "a network occurred when communicating with the game server".  Same thing happens with Internet Backgammon.  Has anyone else had this problem, nobody has found a solution please?

  Patti

  Hi Syed,

  I was able to access all aspects of the internet, only Internet Spades/Backgammon & checkers that are on my PC, all gaming sites like Yahoo & Pogo were available.  A few hours later everything was back to normal, so I think it may have been an error of site specific to these games.  Thank you for your advice I will hold firmly in case of future problems.

  Concerning

  Patti