Communication of the socket in the triggers of the Oracle

Similar Questions

• No communication between the Bluetooth SD - BT2 and PocketPC SD card

  I use an SD - BT2 (PA3271U) card in a Microsoft Pocket PC (also referred to as 'Microsoft PocketPC 2003') 4.20.00. I use the latest driver Toshiba 5.01 C and the card is recognized by the Pocket PC (Medion MD 95450 / MDPPC 150). I can connect to my mobile phone and GPRS connection is accumulation with no problems.

  But later at this point in time, the connection is established but dead... no connection to anyone. It seems that the communication between the Pocket PC and the card SD - BT2 is broken on the software side.

  Anyone have an idea (or a working driver) for this problem?

  Thanks in advance

  Karl

  Hello

  Have you tried to reinstall the drivers or software for SD - BT2?
  In my opinion, you should check this option.
  Also, I found a brand new version for PDA Bluetooth Stack (Bluetooth software and drivers).
  Check out this site.
  http://APS.toshiba-tro.de/Bluetooth/pages/download.php.

  Good bye

• DASYLab is not communicating with the hardware dbk25a3

  Hello:

  I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module.  However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.

  DBK25A3O

  An entry of a module is open.

  Any help is highly appreciated

  Thank you

  Krishna

  The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• My hp c4500 Wireless will not print. Troubleshooting says my printer is not communicating with the router.

  MY hp c4500 wireless printer will not print. Troubleshooting says my printer is not communicating with the wireless router. I've checked everything. Unable to find the answer.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• HP5520 - an error occurred during communication with the scanner

  A HP5520 for a few months and all were working well. But today does not scan wireless.

  I'm on a Mac OSX 10.9.2 imac and have reinstalled just the last bundle of driver on the HP website but no joy. The HP scanning utility will show the printer in the list, but throws up this error message:

  "HP Photosmart 5520 series-AirPrint is currently unavailable. Please check if it is connected and turned on, or try again later. »

  If I try to connect through system preferences printers and Scanners it throws up to the following error:

  "Year error occurred while communicating with the analytical engine."

  Any ideas?

  Don't worry, I've now solved with a stop down / reboot everything after you have reinstalled the drivers. I think that, maybe, last week cut off was to blame reboot on the mac has rebooted without the scanner is powered and the scan of the computer had not been activated. A restart of the mac corrected it.

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• No communication between the printer and the Red computer on switch flashing printer does on every time I turn it off

  I get a message there is no communication between the printer and the computer. Printer is all-in-one HP Officejet 4315v. Have uninstalled and reinstall the software and unplug the USB port and plug it back. Repeated several times. Still no communication. Exclamation red light next to 'on' and green button 'on' butter is flashing all the time.

  You have a hardware failure of the printer.  Contact the manufacturer for support.

• Database alert is not triggered when the Oracle database monitor by mistake.

  Hello

  Database alert is not triggered when the monitor of the Oracle database by mistake. If we test the alert manually alert works correctly. Could someone let me know the solution for this.

  This isn't a question of PC or operating system. You should post your questions in the forums of Oracle database.

• Internet Backgammon no work, receive error message: "a network error occurred during communication with the game server.

  Original title: All of a sudden internet backgammon works not

  Just your portable Windows 7 computer base. Everything worked well. Started playing internet backgammon... has won EACH game Yes! Took a break for an hour or so... came back and now have message saying a problem to connect to the internet game server.  Someone knows what's the problem?  What it says is specifically "a network error occurred when communicating with the game server". That the devil which means?

  Hello

   

  1. what browser do you use?

  2 are you facing the same issue with other games like asset stings on the internet?

  I suggest you follow these methods and check.

  Method 1: You can check if the problem appears in a clean boot state.

  Refer to this link: http://support.microsoft.com/kb/929135

  If the problem is solved, check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Temporarily disable the security software and check if the game works very well.

  Refer to this link: turn off the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 3: If the previous step fails, temporarily disable the Windows Firewall and check if the game works very well.

  Refer to this link: turn enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: After checking the functionality enable the Windows Firewall.
   

  I hope this helps!

• Printer Lexmark Pro 901 lose communication with the computer, print intermittently.

  Lexmark Pro 901 lose communication with the printer prints intermittently.  Disconnect, restart, or other ideas proposed by the help of Lexmark window do not work.  Computer's desktop HP with Windows 7 64 bit. Have seen other reports of similar problem.  Any suggestion would be appreciated.

  Hi André,.

  We understand that you are experiencing some problems with Windows 7 on your computer, but don't worry, we will try to help you.

  I suggest you follow the article below and check if it helps to solve this problem.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Do not hesitate to return if you need assistance with windows, we will be happy to help you.

• How to set up in the community of the 4-byte ASN route map?

  Hi all

  I want to do AS-prefix for one of my ISPs. I have map route this ISP and when I try to configure 'set the 64704:xxxxxx community' under the route map configuration mode, I get an error (it's 6 figures in my number of ACEs).

  in the configuration guides always mentioned ASN "well known." I found 'set extcommunity rt' but I think, and it seems that is not what I want to achieve.

  so, how can I include 4-byte ASN in my 'community set?

  Thank you

  Hi Ruslan,

  Just to comment on the 4B ASN support - there are a few pitfalls. A the community attribute is a value of 4 b itself. So if you store your own ASN 4B in a community standard, there is no space left in it for the remaining part of the value of the community. As the set community command manipulates only standard communities, it is impossible to use 4B ASN with her. Extended communities could be the solution, because they are long 8B; However, the type of extended community to use is called AS specific BGP extended community and is defined in RFC 5668. Unfortunately, IOS does not seem to take this type of community - and even if it did, your ISP would not seek for it according to the output of BLACKBERRIES from the database. The particular kind of wider community, you tried to use is called road target, and it serves a different purpose.

  That being said, I must say that I clearly don't understand the use of communities as indicated by your neighbor. Note that there are two communities:

  remarks:         64700:ASN - do not announce to AS ASNremarks:         64709:ASN - announce to AS ASN

  They say - do not advertise or advertise, to the ASN such AS specified in the lower part of the community. But how could your ISP perform filtering for an independent arbitrary system there if it isn't directly peering with it? It seems to me that if the ASN here in this description may be made by a defined limited ASN ot want to peer with your ISP and not an ASN preceded. In addition, when you read carefully:

  remarks:         64701:ASN - prepend 1x to AS ASNremarks:         64702:ASN - prepend 2x to AS ASNremarks:         64704:ASN - prepend 4x to AS ASNremarks:         64706:ASN - prepend 6x to AS ASN

  It is said "prefix N times to AS ASN" - but to precede what? And what it means when they say "precede"? I would say that at this point, it would be better to call your ISP and to clarify the precise meaning and operation of these values of the community until we try to find a solution to your needs. It might be possible that these communities leads to a different prepending operation than what we think. Best regards, Peter