Compatibiity ISE and wireless

Similar Questions

• Cisco ISE and Meraki RADIUS

  I am very new to Cisco ISE and Meraki.  I try to get the Radius configuration for wireless authentication.  When I do a test of the Meraki to ISE, it passes.

  When I try to connect from my laptop, I look at the logs of the Radius and it passes; However, it does not connect me to good policy.  I keep hitting the default policy.  I have my Meraki police above the default policy in the strategy defined in article.  I have attached what looks like my strategy game.

  Devices does not really matter. Here is what I see when I create a device group (where you add the access point to this group), and then create the condition:

  networkdevicegroups.PNG

  

  And here is where I create the condition of strategy game and you should be able to select the Meraki access points:

  devicecondition.PNG

  

  This will give you the condition similar to what I posted above. This is perhaps why you aren't hit that is not matching the condition for this game.

• For wired network and wireless EAP process

  Hello

  I am confused with the EAP process when compared between wired and wireless. As far as I understand that EAP working if wired authentication of 802. 1 x, the client must have an IP address on this subject in advance. In other words, EAP process cannot start without the IP address on the wired client. For the same reason no doubt allow us DHCP traffic switch low impact.

  But when it comes to wireless it looks that the EAP process can function without an address IP is required on the wireless client. My understanding is correct? If Yes, how can EAP process of progress without an IP address on the client because there might be a scenario this RADIUS/ISE server can be available to the client on a network of layer 3 for authentication 802. 1 x.

  Thanks in advance for clarifying this confusion. I'd appreciate also all link to a good document that covers this concept.

  Kind regards

  Quesnel

  EAPOL traffic between switch and host is not on IP and runs before DHCP.

• ISE - Anyconnect wireless

  Hello! We have a doutb concerning our ISE installation. We have created a new SSID with validation EAP Chaninng (user + validation machine using the Anyconnect client) through ISE and the posture of the NAC.

  The problem is that when a user has never connected to a PC and trying to connect for the first time through this wireless, does not work. The facts are like this:

  -L' user introduced user/pass for the first time to the computer

  -Computer must contact AD to download profile

  -Computer associates with the network

  -ISE puts the user 'pending' until it is compatible NAC

  -Computer launches never process the NAC, it is never

  -ISE does not give access to the network

  -Cannot connect to the computer user.

  This happens only the first time a user attempts to access the network, because you need to download the profile, if the user has connected previously, this isn't a problem. Do you think that there is no solution for this problem?

  Use EAP with EAP-FAST v2 chaining. During the authentication attempt, the supplicant provides credentials for the machine (ISE) authentication server and the user on each attempt to auth.  Supported by the Cisco AnyConnect 3.1/supplicant client. In ISE to allow its support (policy-policy-> results >-> authentication-> protocols allowed-> default access to the network-> enable EAP-FAST).

• Cisco ISE and WLC Access-List Design/scalability

  Hello

  I have a scenario that wireless clients are authenticated by the ISE and different ACL is applied depending on the rules in the ISE. The problem I have seen is due to the limitation on the Cisco WLC that limit only 64 input access list. As the installer has only a few IVR/interfaces and several different access lists are applied to the same base on user groups interface; I was wondering if there may be an evolutionary design / approach according to which the access list entries can evolve next to create a vlan for each group of users and apply the access list on the interface of layer 3 instead? I illustrated the configuration below for reference:

  Group of users 1 - apply ACL 1 - on Vlan 1

  User 2 group - apply ACL 2 - on the Vlan 1

  3 user group - apply ACL 3 - on the Vlan 1

  The problem appears only for wireless users, he does not see on wired users as the ACLs can be applied successfully without restriction as to the switches.

  Any suggestion is appreciated.

  Thank you.

  In fact, you have limitations on the side of the switch as well. Long ACL can deplete resources AAGR of the switch. Take a look at this link:

  http://www.Cisco.com/c/en/us/support/docs/switches/Catalyst-3750-series-switches/68461-high-CPU-utilization-cat3750.html

  The new WLCs based on IOS XE and not the old OS Wireless/Aironet will provide the best experience in these matters.

  Overall, I see three ways to overcome your current number:

  1. reduce the ACL by making them less specific

  2 use L3 interfaces on a switch L3 or FW and the ACL is applied to them

  3. use the SGT/SGA

  I hope this helps!

  Thank you for evaluating useful messages!

• Trial license of ISE for wireless devices

  Hello

  We currently have a project underway for a deployment BYOD, but focuses mainly on smartphones and tablets.

  For this I want to evaluate the ISE. I know that there is a 90 days trial license, but according to the reference of the function guide is the basic and advanced.

  As far as I know there is also a specifically for authentication of wireless devices.

  My question is now, if there is also an evaluation license available for the authentication of wireless devices.

  Thank you!

  Kind regards

  Patrick

  Patrick,

  It still works with the eval base licenses and advanced that come with the software.

  To ensure that radius account management is configured correctly for endpoint devices reports you correctly.

  Wireless license is only for wireless users, while the base allows wired and wireless.

  Thank you

  Tarik Admani

• ISE and WLC for sanitation of the posture

  Please can someone clarify a few things regarding the ISE and posture wireless.

  (1) is the ACL-POSTURE-REDIRECT used for conversion, or is it just an ACL to redirect some of the posture of the kickoff checking traffic?

  (2) can / a dACL/wACL list must be specified as a sanitation ACL?

  (3) the WLC ACL should be written in long format (manually specify source and dest ports/doesny direction any job?)

  (4) does anyone have working example ACL for redirect (CPC) posture and sanitation (dACL)?

  (5) any other advice or pointers would be as useful as any docs I have found so far, what he TrustSec2, CiscoLive or anything else, do not seem to help me understand sanitation and WLC posture

  Thank you

  Nick

  Yes,

  This means that strategy available to your customer does not have a rule that will correspond to an entrepreneur who joined the network. Can you post a screenshot of the provisioning of customer policy?

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Mouse and keyboard devices and wireless losing charge quickly battery USB draining energy

  I have an iMac with keyboard and wireless mouse (OS X 10.6.8).) Recently, I'll have to replace the AA batteries on an almost daily basis. Anyone have any ideas? I use rechargeable batteries and they are new, so not down for used batteries.

  If I try to connect a camera to download images, I get a message from time to time as the USB devices will cut as drain too much energy - other than the camera I have not all connected USB devices.

  Reset the SMC can help with the problem USB reset management system (SCM) controller on your Mac - Apple Support

• Cannot install drivers LAN and Wireless Lan on my Satego P100-10U

  Hi people =)

  II just reinstall WIndows XP Professional on my Toshiba Satego P100-10U.
  I downloaded all the drivers from the Toshiba page and he burned them on a CD.

  I inserted the CD in my computer and installed most of the pilots. But for
  a stranger strange reason drivers network such as LAN and Wireless Lan
  drivers do not work!

  Can someone help me?

  Don't work or you can not install them?

  LAN driver must be installed manually because there is no setup.exe file. Go to an unknown device in Device Manager > properties > driver installation and navigate to the folder where you extracted the driver files.

  Please let me know if it works.

• Satellite L735 does not connect to the internet (wired and wireless)

  Hello

  I have a brand new L735 satellite, and I'm having a lot of trouble with internet connections.

  When I connect to a wireless network it is the profile and connects but still then doesn't say: "no internet access" for two IPv4 qnd IPv6 connectivity status.
  I tried troubleshooting, turing off the computer, and wireless network and stil back, but it does not.

  The same phenomenon occurs with the workplace wireless, despite other computers that connect to this good (so it does not come from the networks). I also tried to connect to work with an ethernet cable but no luck.

  I have the Atheros AR9002WB-1NG wireless network card and the Atheros AR8152/8158 PCI - E Fast ethernet controller.

  I don't know what to do as the laptop is new and so it should not need to updates, all parameters are default, etc.. I'd appreciate some help here!

  Hello

  Uninstall or disable the TCP/IPv6 and use only TCP/IPv4 protocol.
  Also check whether in the properties of TCP/IPv4, IP address and other parameters are defined to assign automatically

  I recommend also check the firewall and some security applications that may be preinstalled on your laptop.
  It might be possible that antivirus or firewall block the laptop to connect to internet.

• HP OfficeJet Mobile series 200: Wi - Fi Direct and wireless disabled

  Wi - Fi Direct and wireless turned off whenever we pressed the button on the control panel printers. A message appears and says "this feature has been disabled. Contact the person who set up the printer. I don't know how well disabled it since this is a new printer. I don't have this problem on other printers and so far I have 5 who has this problem. How can turn us this feature back? Ahy solution or suggestion is greatly appreciated.

  Thank you

  Forum suggsted to press the back button several times when she turned 5 - 6 times. In our case for the portable desktop printer 200 series, must press the Cancel button several times to 4-5 times until you see to activate / disable menu. We have activated all the network and simply follow the instructions in the guests to activate all the wireless features, including a Wi - Fi connection live.

  Thank you

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• Behind a firewall for Internet connections and wireless and inaccessible

  My netbook (XP) was attacked by viruses and therefore the firewall has blocked the internet and wireless connections. I installed the new Norton protection and this shows the machine also Ok. Here's the question - how can I activate the connections again? I realize that he is probabl; is really easy, but I just can not understand. Your help is appreciated. Thank you, Steve.

  You can try to disable the Windows Firewall:

  http://www.Webcam123.com/en/FAQ/xp_firewall.html

  If you have installed the new Norton protection, I don't think that you need more Windows Firewall.

• Satellite A100-785 - after the virus the bus USB and wireless do not work

  Hello
  I have a Satellite A100-785 with Vista 32 bit.

  I installed the Windows updates and another program. My antivirus detected a virus and delete files and now the USB bus and wireless do not work.
  I downloaded and installed a new driver for my model, but it does not work.

  Help, please!

  And, I want to recover the factory setting but I don't have a recovery CD now. How can I restore to factory settings? If cannot repair with the method of mormal and kare without recovery CD.
  See:
  [http://i39.tinypic.com/rw4f8p.jpg]

  Hello

  You should try to remove the devices that they are marked with a yellow exclamation point. Start Notepad, and then install the latest drivers from the Toshiba site.

  If the virus has destroyed an important system files that it s is no longer possible to install a driver and you need to reinstall Windows using the Toshiba recovery disc.

  Did you create the Toshiba Recovery disk? You can do this with the Toshiba recovery disc creator, which is preinstalled on your laptop. Maybe you are able to do this at the moment.
  In addition, you reinstall Windows using the recovery of HARD drive option. So go to the advanced boot menu and select Repair my computer. Some Windows files will be loaded and then you can choose the Toshiba Recovery option and follow the instructions on the screen.

  If you can t create the recovery disk, you must order a new Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• drivers audio and wireless for c738tu

  Hello. I recently had to install windows xp on my compaq pressario c738tu. now there is no audio data and the control panel says no audio devices installed. also my ethernet and wireless controller does not work. I downloaded the drivers for xp on the hp site, but of no use. Help, please.

  Message edited by swastikagrawal on 05/27/2009 07:39

  Hello

  Prior to Conexant Universal Audio Architecture (UAA) here
  
  Conexant High Definition Audio drivers here
  
  This will create a swsetup folder in c ("C:\swsetup\sp34200") drive
  Audio driver installation may cause an error. But continue with the following steps to get the audio driver installed correctly.
  Open the Device Manager:
  1. Click Start and select run. Now type devmgmt.msc and press ENTER.
  2. right click on "Audio device on High Definition Audio Bus" and click Update driver.
  3. Select "Install from a list or specific location".
  4. click on next. Then select "don't search, I will choose the driver to install".
  5. click Next, then select 'audio, video controller and game' in the list.
  6. click Next and then click on disk.
  7. click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click Open and continue with the instructions on the screen.
  
  Similarly install Modem drivers:
  
  Conexant HDAUDIO Soft Data Fax Modem with SmartCP here

  1. right click on "Modem device on High Definition Bus" Audio and click on update driver.
  2. Select "Install from a list or specific location".
  3. click on next. Then select "don't search, I will choose the driver to install".
  4. click Next, then select "Modem" from the list.
  5. click Next and then click on disk.
  6. click Browse C:\swsetup\sp33890 folder and select the .inf (wis30b2b) file and click Open and continue with the instructions on the screen.