computer brand recommendation please.
I production premium CS4 and eager to upgrade to an I7 computer with 12gigs. Are there computer brands that I should shy away? What works well for you?
You can watch a few good videos to Home PC Builder
If you look a the results page on the PPBM5 site you can see what others are using.
http://ppbm5.com/Benchmark5.html
For to build you your own will give you the best bang for the buck and you give the System cleaner also.
GLenn
Tags: Premiere
Similar Questions
-
My backup is complete, so my computer is recommend I have remove some of my old backups
my backup is complete, so my computer is recommend I remove some of my old backups, are my most recent backups Save this info also, I won't delete important information.
Thank you
C. MR. C.On Monday, February 6, 2012 15:37:44 + 0000, C. M. C. wrote:
my backup is complete, so my computer is recommend I remove some of my old backups, are my most recent backups Save this info also, I won't delete important information.
What you save up to? Are what program you using backup?
You can read this article on the backup that I wrote: 'save '.
"Your computer regularly and reliably" to
http://www.computorcompanion.com/LPMArticle.asp?ID=314Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
Please reply to the newsgroup -
Original title: necessary emergency assistance, cannot log on to pc, password not recognized
Last week, I bought a brand new model of laptop Asus K55A. All had been working fine without any problems, but when I tried to connect today (after previously working well earlier today a stop and then restart a few hours later) I could not signed. The message I get is: "your computer is offline, please enter the last password used on this computer" OR "that password is incorrect. Make sure that you use the password to your account Microsoft "and then gives the address to visit to reset the password as an option.
I am now on a different pc and (after literally hours of trial and error messages on the site of Microsoft live!) have managed to reset my password - obviously successful because I used it to connect to this form. However, when I restart and try to connect to my own laptop, I just get the same thing. It is not to recognize the new password! As I am the ONLY user on my laptop has no way for me to go at all! Help, please. Without him recognize the new password, my new laptop is completely useless!
NB: I'm not too so there are a limited number of questions technical I can answer, however the above should give you the gist of the question, if all goes well computer savvy. Windows 8 is the operating system in question, btw.
"PROBLEM SOLVED-"your PC is disconnected"Message in Windows 8.Here's how I fixed my Asus laptop, but works the same on all the others, I'm sure. Easy instructions are here:www.nextofwindows.com/How-to-deal-with-your-PC-is-Offline-message-in-Windows-8/I went to the Business Center at the apt community I live in, pulled the decision-making network of one of their boxes and plugged my laptop, efficiently connect to their internet. I did not stop their computer, I just it out and put it in my laptop. Then I logged on my laptop with my hotmail account. It was all she wanted. I was in!I disconnected and close my laptop. And reconnect their their pc network cable.I pulled my laptop to make sure, it was fixed, and it is. Awsome. We had to plug into a network with a network cable, taking care of her.You have no idea how long it took me to find this simple answer. Their positions are everywhere and people are being told to wipe their readers or buy a piece of a $30 software. -
A computer brand new with windows 8 will not play GTA IV
Separated from this thread.
computer brand new with windows 8
new computer game will not play GTA IV
Hi, Freddy.
Welcome to the Microsoft community. It seems that you are unable to play the game of GTA IV on your new computer. It may be difficult when a new computer is not the games.
To help you with the problem, we need more information. Please answer the following questions:
What happens when you try to open? Do you get any error messages?
What is the brand and model of your computer?
As this is a new computer, I suggest that you update the display card drivers and check if you can play the game.
You can visit the manufacturer's Web site and download the latest drivers for the display adapter. For help, refer to this article. http://Windows.Microsoft.com/en-CA/Windows-8/all-drivers
Response with above information to you help the better.
-
He continues to tell me that the required updates are not installed in order to download and run Internet Explorer 9... I have already installed SP2 and restarted my computer TWICE. Please help me!
I wouldn't bother downloading it, but I need for a course that is only compatible with IE9... He is constantly telling me that "Setup does not support this pack", even if the sine qua non pack has been installed!
Hi stephprice,
I suggest you follow the articles provided below and check if it helps.
-
I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.
-
Hi, not long ago, I bought a computer and adobe ac pro 11, the computer broke down, I got a new and I don't know how to download acrobat pro 11 on the new computer. Help, please. Thank you.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I re install my cs4 on a new computer and I'm short on 4-digit serial number I checked using the tab information on photoshop from my old computer? Help, please
Hello
Please check the help below document:
Quickly find your serial number
In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts
Kind regards
Sheena
-
I accidentally buy the windows version of adobe acrobat DC instead of the mac version I only a mac computer can you please cancel my purchase and replace it with the version of windows with a mac version. the order number is AD006058877NL. Rgds, jan van montfort + 31681471049. [email protected]
Hi Jan,
I understand your concern, please see this doc on this subject: return, cancel or change an Adobe order
Kind regards
Rahul
-
Need help with my computer speaker (s) Please!
Please help me with my computer speakers, once my registration, they are on, and the next time, they're gone! I don't hear anything, not even a song on you-tube. Any advice/help will be greatly appreciated. Thanking you in advance, Margie
Hello
1. What is the operating system installed on your computer?
2. What is the brand and model of your computer?
3. were there any changes made to the computer before the show?
Please follow the steps from the link and check that it works very well.
No sound in Windows
-
Liteon Cd ROM completely lacking in 'My Computer'. Help, please! (Someone... Please help!)
Hello. I tried to contact the OEM directly, but it has been a week and no response. I hope someone can help me please. I copy the email below. Because I sent this e-mail, I found more "evidence" of the prior exestance of CD ROM Although it is completely zero from 'My Computer', there are a lot of drivers on the computer for him and now I don't think it's the drivers. I don't know what to think, really. "Here are my new results: in Device Manager, under" Liteon CD ROM "(always with an exclamation yelloe on this subject) I tried to run the"Hardware Update Wizard"for her, and I got this response: the wizard did not find a better match for the material that the equipment currently installed. When I look under 'properties', he says: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. When I click to troubleshoot, I get the same message ("Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »). He (Liteon CD-ROM) is not listed under "config/system/system information system summer/components/multimedia/CD ROM '-there's just an empty space next to"CD ROM ". Even that in "my computer - it's gone." The CD ROM will not work, but the light is on and it wil eject and accept a disc, but it will not read it. Please look at my email below and please email me with any questions or recommendations. I can't take another sleepless night, trying to "find my CD lost. It can be a very simple solution - I hope so. But in all honesty, I really don't know what the problem is.
! Mark) - in the "Device Manager" , I get the error: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». Then, when I right click on it and select "Troubleshoot to start the troubleshooter for this device", I get the same error: ("Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »). Track only of it (that I can find anyway) is in the 'Device Manager', where even once, it's a big yellow exclamation on the "Liteon CD-ROM LTN486S" here. It is the only piece of evidence that it ever existed. I've looked everywhere I can think of, in places that I didn't know existed. I've looked everywhere on the internet for the driver for the "Liteon CD-ROM LTN486S' updates but unfortunately, I can't find. There are a few items that refer to the "OEM". For some reason, I think it's the drivers, but I'm not computer very well informed. It could be something completely different. I wish I could uninstall info CD (only) existing Liteon I can find - and reinstall everything from zero (even do this? Please, tell!). Then... I thought that I contact me Liteon and ask for the drivers. It's at least a Start. Could you tell me if there is something else I should do or review.Dear Sirs,I'm really, really hoping you can help me. I'm about to lose my mind trying to figure this out by myself. I can't find a more appropriate contact you, so please forgive me if this isn't in your area or service. If that is the case, Please before my email to the section within your company and let me know. Everything on the official Liteon site I found and (tried to) read is in Taiwanese, and I am unable to read or translate. If you could (have mercy on me) so help me or point me in the right direction - I would appreciate it very much . I tried to understand what I have to do for 2-1/2 weeks and I have spent too much time on this when I should be spending time with my kids! :).My problem is the following... Recently, I ran a clean up/duplicate file registry cleaner program (ARO) and it seems also removed some vital and very much needed files, extensions, drivers, programs and who knows what else. I had to download several other programs, file extensions and drivers from scratch, in order to get these things working again. But I can not for the life of understand me what to do with my Liteon CD-ROM. I also used the registry cleaner deletes "duplicate files", and after researching (too late), I found that it often confuses some files as duplicates when they are indeed not the same - post or file descriptions are very similar, or disable a single number or letter. I lost a lot of my pictures as well, and I'm heartbroken over. Anyway, the biggest problem I've noticed is that my CD ROM (Liteon CD-ROM LTN486S) will not work. It happened immediately after the registry cleaner 'cleaned' my folders and things - so I guess that's the culprit. In fact, my computer is not recognizing even the CD ROM at all. It of Completely disappeared-MIA of 'Information/system components' lacks content 'My Computer' and when I try to update the drivers in the only place I can find that show the CD ROM (but with a large yellow explanationMy system info: I have a (Compaq Evo) Windows 2000 Professional SP3 XP. For what it's worth-(if this is important) it's a NIC PCI 32-bit, Intel Pentium 3, 700 MHz, 128 MB total memory, 20.0 GB hard drive, CD-Rom drive, CD - RW drive, 56 k Modem and 10 / 100Mb... (whatever the devil what is). Microsoft Update is in place and worked (automatically), and my system is "up to date" as far as MS is going. Help, please! I don't know where to another look or what else to do. Please, please... Please advise.I thank very much for any help, information, recommendation or reference you can give. Maybe you have a safe and wonderful holiday season.Jenifer Williams, 39...Amazing MOM, amazing nurseA lot of email from Google and shopping experience :)Skills very little mundane(But quickly learning by trial and error!)SC, UNITED STATES.Favorite (only known) language: EnglishThanks again!.You're welcome, and good luck!
-
My computer hacked, how can I perform a new installation of my computer? Help, please
I clicked on the result of google search that looked like, it was on google chrome and the page that came said that I had been hacked by the Cyber army Pak. I really need to solve this problem, because they already seem to have gotten access to my computer.
It's an HP.Hello
Contact HP and ask them to send you in vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
____________________________________________________________
or follow these steps;
Restore the PC to its original state with the HP Recovery Manager of in Windows VistaIf the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.- Click Start
and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens. - Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
- When the PC restarts, select the System Recovery option and click Next .
- If you are prompted to use the Microsoft System Restore , click No and then click Next .
- When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
- When you are prompted to recover without backing up your files , please STOP before you click Next .
CAUTION: It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped - If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessibleIf the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.. Follow the instructions.- Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.
NOTE: By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed. - If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
- If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
- If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.
- When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
- Insert the recovery disc into the optical disc drive and start the computer.If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
- When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
- Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
- When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
- Follow the on-screen instructions and perform the necessary actions.
- When you are prompted, follow the on-screen instructions to backup user files.
- After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.A status box is displayed to indicate the State of the recovery and the estimated remaining time.
- If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
- When you are prompted to Insert additional driver disk , take one of the following actions:
- If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.
- If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.
- If you have created a personal recovery disc, press Next to continue.
- Continue following the onscreen instructions to complete the recovery process.
-
Acer computer brand new with problem BSOD in Windows 8
Hello
I bought this computer Acer Predator brand new and I'm getting BSOD related reboots.
Could you please check my minidump file and give me advice?
Or I'll take the computer as the hardware and the software is under warranty.
Concerning
https://onedrive.live.com/redir?RESID=734A709756E8E767%21140
Yasin
Hi John,
We have several audits of bug:
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (CF)
This indicates that an attempt was made to execute non-executable memory.
KMODE_EXCEPTION_NOT_HANDLED (1e)
This indicates that a kernel-mode program generated an exception which did not catch the error handler.
Verification of error 1E, {ffffffffc000001d, fffff801af0bb63e, fffff801af363800, 2}
0: kd > fffff801af0bb63e ln
(fffff801'af0bb600) nt! KeReleaseInStackQueuedSpinLock + 0x3e | (fffff801'af0bb670) nt! KeResetEvent^^ The exception is produced in nt! KeReleaseInStackQueuedSpinLock. This routine restores the original IRQL that the operating system saved at the beginning of the call to KeAcquireInStackQueuedSpinLock .
KeAcquireInStackQueuedSpinLock increases the level of IRQL at DISPATCH_LEVEL level during the acquisition of the spin lock.
If we check the IRQL at time of accident:
0: kd >! IRQL
Debugger saved IRQL for processor 0 x 0-2 (DISPATCH_LEVEL)^^ Very well, we're right on the money in the measure of the level IRQL go... but why an exception occurred here on this pretty normal routine? My guess is we had a DPC/lock and the system deadlocked. It could be both material.
TIMER_OR_DPC_INVALID (c7)
This is issued when a timer kernel or deferred procedure call (DPC) is located somewhere in memory where it is not allowed.
This problem is usually caused by a driver, not to cancel a timer or a DPC before freeing the memory where he resides.
---------------------
1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.
2. remove and replace McAfee integrated Windows Defender in Windows 8 for temporary troubleshooting purposes as it is probably cause conflicts:
Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331
Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html
3 if the two above fail, return the laptop ASAP for a new replacement brand as then it is a hardware problem. No brand new laptop should be planted in all circumstances.
Kind regards
Patrick
-
I am looking for a replacement facility for my parents in their late 60s. they previously shared a very old macbook pro (15 ", I think), who conked a few weeks ago.
my mother uses it mainly for browsing the web, candy crush, email, view photos, watch streaming of Korean dramas. My father use it for navigation, excel and word.
I thought I had them the low-end imac 21 "(1, 6GHz, 1 to), but the comments I read slow performance make me reconsider." anyone with a similar use of the imac would say about its performance please? they do need a better machine, but I don't want them to be confronted with the spinning beach ball more often than necessary, especially on a new computer.
I am also considering a macbook or macbook air or even the mac mini (but as I won't be there to help with all upwards, something that they can just plug and play may be more convenient.)
Nothing wrong with the new iMacs. I have heard a lot about slow Mac here. But you can't judge what you read here. It's like a Hospital ER, for most of the people with problems to come here.
They will use the aircraft mainly at home or on the road? I ask because for what you say they use for an iPad would probably be enough, and if they have a wi - fi connection, you could buy one without a cell phone.
-
Looking for software SimplePass 2012 to upgrade my computer. Link please!
Have DV6 - computer 6140us - can someone please provide the link to download the software SimplePass 2012. I looked at and it looks like a bunch of different links for different computers. I want to make sure that I get the right pair. THANKS FOR ANY HELP!
Hello sc_sweeper,
You want to update your single pass software.
The last update that I found your product has been in 2011
Here is the link for downloading software for your system if you want to take a look.
Let me know if it helps.
| NOTE: | Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots. |
| NOTE: | Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times. |
| NOTE: | If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information. |
Maybe you are looking for
-
My new iMac has no start-up chimes... is it broken already? I always learned that the chime indicates a Mac work. 10.11.4 using
-
Satellite L750D/L755D - its integrated and DVD player does not work.
Hey First of all I have no idea where to post this.Beside that, I'm clueless about take you over the page. (which lets you choose the computer laptop/build/etc etc)So here I am I have a Toshiba - Satellite-L750D/L755D He came Pentecost 7 windows, but
-
ProBook 450 G2: SD ard drive does not
Hi there, it anyone have a driver for ProBook 450 G2 for card reader. 8.1 to win. 64 bit Have installed all the drivers page from HP, all the works of material however, support SD card driver does not work. Thank you
-
My monitor went dim. I can still see everything - it's just dark. How can I fix?
-
Internal database Windows Service Pack 4 (KB2463332)
Cannot install this update on Win 2008 Server standard. Returns a 643 error