computer stops after 30 to 40 minutes of use. have to wait as long to go back on.

Similar Questions

• my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  my internet radio stops every 10 to 15 minutes and I have to update it again and again. The same thing with my action also voip internet phone while iam using it

  Hello
   
  (1) what version of Windows are you using?
  (2) remember to make changes to the computer before the question?
  (3) what browser do you use for Internet Radio?
  (4) what do you exactly mean by the loss of the webradio?
  (5) on which site you want to play the radio?

  (6) using WIndows Media Player to listen to Radio Online?
   
  See also a few following articles dealing on VoIP.
  Troubleshooting VoIP
  http://TechNet.Microsoft.com/en-us/library/ff849747.aspx
  How IP phones connect to the network
  http://TechNet.Microsoft.com/en-us/library/gg425740.aspx
   
  Get back to us with more information on the issue so that we can better help you to provide the resolution.

• Computer stops after 30-40 minutes

  original title: after getting started, computer will not run longer than 30 to 40 minutes before it stops. have to wait 30 to 40 minutes before he will return.

  Ben said fan does not work. checked both and the two sems to work. said also that it might be something that heats up and turns off until it cools down again. becomes very frustrating.

  Would appreciate any help. Thank you

  You are able to dismantle the system to add or replace parts?  If so, try this procedure I posted a long time ago: Troubleshooting hardware Via system Louise - John ( http://www.carrona.org/index.html )

• Computer stops when idle for one minute.

  Original title: where is conyrol time LOCK?

  My computer shuts down after only a minute or two of an inactive cursor... Where can I set the timeout?

  Hi Mary,

  1. What is the brand and model of the PC?

  2. have you started facing this problem recently? If Yes, are you aware of any material changes or software on the PC?

  3 - is the computer stops in fact or did the screen turn off?

  I suggest you follow these methods and check if it helps.

  Method 1:
  Follow these steps.

  a. press the Windows key + X, choose Power Options .
  b. click the link change plan settings under your power plan.
  c. turn off the screen and put the computer to sleep > set the duration of each 1 minute forever.
  d. click save changes when done.

  Method 2:
  If this does not help, restore the settings to the default values.
  a. press the Windows key + X, choose Power Options .
  b. click the link change plan settings under your power plan.
  c. click on restore by default for the plan.

  See the article.
  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  Let us know if it helps. If the problem persists, we will be happy to help you.

• Computer stops in normal mode. Do not use the safe mode, because I have no sound, or security out there, please help?

  Computer stops in normal mode quickly. Do not use in safe mode, because I have no sound or security, please help?

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Keep in mind
  This associated heat does not always mean too much heat as it is often a part or a component
  who is too sensitive to normal levels even heat.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Apple music stops after playing a song! I use windows 10 and the new itunes. He stops playing after one, sometimes two song... radio too... Please help. I installed and all new authorized...

  Apple music stops after playing a song!

  I use windows 10 and the latest itunes on my laptop. He stops playing after one, sometimes two songs... radio too... Please help.

  I installed and all new authorized...

  Thank you...

  Markus

  same thing here for all my Mac or PC windows... they are "working" 8 months later... unreal

• Downloaded 4 fonts on my computer and all the files unpacked, but says I have to wait until Windows is finished with the files

  I downloaded 4 fonts on my computer and all of the decompressed files. However, my computer telling me I have to wait until Windows is finished with the files. I made sure all Windows programs are disabled, but he still repeats the message. Why is it so?

  Hi Clarissa Tan.

  1. What is the complete message you receive?
  2. Which site did you download the fonts on the computer?

  Method 1

  I suggest you to use the link below to download new fonts on the computer and check if it helps.

  To add a new font to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fonts_addnew.mspx?mfr=true

  Download new fonts

  http://www.Microsoft.com/typography/fonts/

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you set up the computer in a clean boot state and try to install new fonts, check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• HP M7170N too hot to 214F. Computer stops after 1 minute

  I need some additional opinions on what may need to be replaced. In summary, here is the problem. I unplugged everything from the motherboard including USB and media players. I took out all but 1 Memory stick. Everything that is connected to the motherboard's power supply graphics card, System fan, CPU fan, and button / stop. Also, I had to connect to the mouse and keyboard. It was an attempt to eliminate everything else. In any case, I start the computer and go to BIOS. I can stay in the Bios for about 1 minute until the computer reached 214 (F) or 107C and then stops. The CPU seems to be OK. I have not seen a failure of the CPU at startup. I reapplied grease thermal and cleaned and reconnected the heatsink with fan. The fan runs but slows high-speed after 5 seconds approximately. I usually less than a minute to go BIOS before the CPU is hot. The CPU fan turns at 3800 RPM. My guess is that there is a problem with the radiator. I would appreciate any advise on what could be bad, before I have to start to buy coins. I'm thinking that its either the motherboard or the radiator. The power supply seems ok. Thank you

  It is one of the best CPU cooler air cooled.  Final cost is $ 21,50 after coupon code CPJUCOLEP05 and save $ 5.  Delivery is free.

  http://www.chiefvalue.com/product-_-ProductDetails.cv_-_item--CE00153889010060&CMP=AFC-FatWallet

  http://www.FatWallet.com/redirect/bounce.php?afsrc=1&mid=13839286&URL=http://microcenter.com/rebates/rebate_show.phtml?ID=40461

• Computer stops after the installation of security update KB2393802

  I'm 'rebuild' an old computer Gateway E-4600, to give via a local social agency.

  OS is XP Home, and the product ID of the COA is valid.

  I'm writing this, I'm in the middle of the 3rd attempt to get all of the updates to install * without * preventing the closure of the computer.  Each facility has given me minor differences in available updates, but I was not sufficiently detailed records of what was suggested to be more precise in these differences.    I'll know better here on out!   Laughing out loud

  I didn't know that a problem existed in the judgment until I was almost done with the first reconstruction, which included the installation of the software.

  During the reconstructions of the second and third, I largely used the system restore to isolate any problem and found the following:

  KB 2393802 for Windows security update prevents the computer from closing with the closure of the XP Start Menu or Task Manager.  The only way I found to stop it is to hold the power button on or unplug the computer.  I don't actually unplug the unit, but that obviously has to work!   Laughing out loud

  More interesting still, the article refers to Intel and AMD graphics cards, and this computer has a graphics card from NVIDIA GeForce2 MX/MX 400 (via Belarc Advisor).

  I'm still trying to find an answer online, but nothing so far.

  I can't give this with this problem :-(

  I would like to know the answer to one or both of the following questions:

  1. Why Windows/Microsoft Update tells me to install an update for a graphics card that is not installed in the computer?
  2. How can I prevent Windows/Microsoft Update listing and want to install the update that is as a manual or automatic installation install?

  Thoughts and suggestions?

  Yes, I'm still 'watching' this thread.

  My answer 11 - Aug 31 is still standing.

  Hi, PA Bear.

  Hallelujah, it's fixed!    : grin:

  While working with the technical support of MS, I discovered by chance that the computer turns with KB2393802 installed if the computer is disconnected from the internet.   AKA, unplug the Ethernet cable from the computer.

  Finally, I started to wonder if the question can be hardware and not software.

  So I started picking at glitter and for me, it means generally try the easiest to accomplish the solution first.   Laughing out loud

  It was a replacement of the CMOS battery, but that didn't work.  I really didn't think he would, but hey, it was the best thing to do.

  I was going to swap hard drives, with a new installation of Home or Pro, but then I realized that it was still easier to swap the Ethernet card.

  I deleted the Linksys card (the latest version of the driver is already installed) system drew the card and dug an old map SMC EZENET of the pile of junk.  (Who doesn't have a lot of junk!   LOL) went scrounging for a driver online and got that installed, then used the device to update manager the driver, and the rest is history.

  I shut down the computer at least 10 times since (I kept a detailed log and when I hit 7 successful stops I stopped making new entries) and it worked fine every time.

  This could be something to the file in memory banks trivia!    Laughing out loud

  Thanks for the help and suggestions.

• Computer stops after removing the hardware device.

  Original title: closure of the problem

  Once I am done using bluetooth and easy then disable the bluetooth in my laptop sony vaio, my laptop keeps. It is stuck on the "shutting down" screen and stays just like that. In this case only everytym I use the bluetooth.s

  Hello

  Thanks for asking! If I understand correctly, you have a problem with the computer to close after removing the Bluetooth device.

  Before I continue, I would like to collect some personal information.

  1. Were there of the last changes made to the system before the show?
  2. You get the error message?
  3. The question is limited to specific device?

  Method 1:

  Follow the link to perform a clean boot check, if it helps.

  How to perform a clean boot for a problem in Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 2:

  Follow this update of the driver update Bluetooth drivers. Check if it helps.

  Answer with the results, I would be happy to help you further.

• computer stops after starting, strange message

  The computer starts and then turns off.  Then starts again.  Message is "your black keys are corrupt."

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://Forum.antivirus365.NET/index.php?showtopic=299

  Read the above info.

  http://www.google.com.au/search?hl=en&source=HP&q=Your+Black+Keys+are+corrupted&aq=f&aqi=&AQL=&OQ=&gs_rfai=

  Information from Google.

  See you soon.

  Mick Murphy - Microsoft partner

• PS and PR Pro 30-day trial stopped after 4 days when versions of 2014 have been upgraded to 2015

  PS and Pr Pro 2014 30 day trial downloaded and installed 4 days ago. Today both have been updated to versions 2015, all at once the trial was over 26 days too early. See transcript of chat support useless quotes for more details. Any ideas?

  Jaymani: Hello! Welcome to the Adobe Customer Service.

  Maier kid: Hi

  Jaymani: Hello Kid

  Maier kid: Read you my number?

  Jaymani: Yes, I reviewed your question.

  Jaymani: I understand you get test message with your CC.

  Jaymani: I'll be happy to check and help you with this.

  Maier kid: Short: downloaded and started my CC of Adobe Photoshop and first Pro 30-day trial 4 days ago. Today they have been updated to versions from 2014 to 2015. CC10 tells now left 30 day trial, but applications do not work during the launch, telling that the trial is completed.

  Maier kid: In other words, I lost my case until I had time to evaluate the software, 4 days after installation instead of 30 days, as should be.

  Jaymani: Thank you for the confirmation.

  Jaymani: Please let me 2-3 minutes I check the details of your account for you.

  Maier kid: OK

  Jaymani: Thank you for your stay online.

  Maier kid: No probs

  Jaymani: I see that there is no product under your DELETED EMAIL address

  Jaymani: Can I find out, if you use another email address to place an order?

  Maier kid: What do you mean? I downloaded versions of 30 day trial of Photoshop and Premiere Pro only 4 days ago.

  Maier kid: This is my email address.

  Maier kid: And I confirmed.

  Maier kid: I am connected to this monet creative cloud app on my desktop using this email address, it shows Photoshop and Premiere Pro installed and I have 30 days left on my trial.

  Jaymani: can I have the order number please?

  Maier kid: But when I run the application, a pop-up window says the trial is completed.

  Maier kid: I HAVE NO ORDER NUMBER! I've never bought your products. I've created an ADOBE ID 4 days and downloaded TRIAL version.

  Maier kid: I just received this email:

  Maier kid: 'Welcome. We are pleased that you joined us. Thank you for creative cloud. We thought we would send along a few ideas to help you get started. Download the all-new versions of creative desktop applications that make daily tasks easier and faster while offering new support for advanced equipment and standards, 30 day trials. Easily upload and share your files or report your work to the community of creative professionals Behance to get feedback, get inspired and connect with new opportunities. Express your creativity on the go using our new and improved mobile applications range".

  Jaymani: Thank you for the confirmation.

  Jaymani: I'm sorry for the confusion.

  Maier kid: That the email was sent to me June 13, 4 days ago.

  Maier kid: The same day I installed these 30 days trial versions.

  Jaymani: Can I find out, if you downloaded the trial version for the first time using this email address and on the same system?

  Maier kid: I'm not buy products if I can't test them and get the trial period I was promised.

  Maier kid: I never had previous Adobe trial versions or purchased products installed on this page or any other computer.

  Jaymani: Thank you for the confirmation.

  Jaymani: Please allow me a moment.

  Maier kid: OK

  Jaymani: I'll give you a link to check for this.

  Maier kid: OK

  Jaymani: Please click here to see

  Maier kid: OK, this page does not help me. I have not changed the time system, I have not modified executable files, not attached a debugger and not to perform a virus scan automated.

  Jaymani: Thank you for the confirmation.

  Jaymani: In this case I suggest you post your query in the Adobe forums so that our product specialist will be the answer to your question as soon as possible.

  Maier kid: Simple: yesterday, I got 30 days of testing for the 2014 CC versions of these two applications. Today they have been automatically updated to 2015 versions and the 30 days trial stopped early 26

  Maier id: OK.

  Maier kid: Bye.

  Hey Kid,

  Please check the help below document:

  Adobe trial software has expired at the beginning

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Kind regards

  Sheena

• Windows import video repeatedly stops after a few seconds when you use DV cam to convert and import analog videos

  With the help of a Canon Elura 40 mini DV camera to import my old Video 8 tapes to the .avi format. I followed the instructions from http://windows.microsoft.com/en-US/windows-vista/Import-analog-video-to-your-computer-by-using-a-DV-camera . However, when I click Start import import will work only for a few seconds and then stops. If I keep restarting after that it stops every time (5 to 10 times), I finally get a message under the controls of cam DV that says "commands does not. Then it will keep the import without problem. I discovered this solution accidentally, but not knowing when it will eventually continue to record does get the departure point. If I import directly using a digital camera 8 this is not the case, but the Video 8 does not play well on the Digital 8.

  Thank you.

  Hello

  Method 1: You can follow the steps described in the article below that addresses this question

  Error message when you try to import video clips from a device on a Windows Vista-based computer: "the import device is not responding.

  http://support.Microsoft.com/kb/922977
  

  Method 2: you can follow the steps mentioned in the link below

  
  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

• The desktop icons to stop after I leave internet. Can use the start menu

  After reboot, all the features of the icon on the desktop.  Inbound and outbound to the internet, I get no response.  The start menu, takes me on the desktop and everything works from here

  Hello

  Did you the latest changes on the computer before this problem?

  Method 1:

  I suggest to start the computer in Mode safe mode with network and check if the problem occurs. If the problem does not occur in Mode safe mode with networking and then you try to perform the clean boot to find what startup item or service is causing the problem.

  Step 1: To restart in Mode safe mode with networking enabled:
  (a) reboot your computer.
  (b) when you see the logo of the manufacturer of the computer, press on and hold the F8 key.
  (c) on the screen Advanced Startup Options , use the arrow keys to Select Safe Mode with networkand press enter.
  account d) log your computer with a user who has of administrator rights.

  Reference: http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If the problem does not occur in safe mode with network you try to perform the clean boot.

  Step 2: Perform the clean boot.
  
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2:

  If the problem persists, try the procedure described and check if that helps.

  Step 1: Rebuild the icon Cache

   
  a. open the Folder Options to select (round), display the hidden files and folders.
  b. open a Windows Explorer window.
  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click Remove.
  e. click Yes to confirm the deletion.
  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.
  f. close the window.
  g. empty the Recycle Bin.
  h. restart the computer.
  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date.
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.
  j. the icon cache has been rebuilt.
  k. open Folder Options for select (round) show not the hidden files and folders.
   Step 2: Reset the icon Cache
  a. right click on an empty area of the Office and click on Personalize.
  b. click the link display properties.
  c. under colors, select medium (16 bit) and click apply.
  NOTE: If you already have a medium (16 bit) selected, then select the highest (32-bit) instead. Sometimes, you will have to do a reboot first, then go to step 4. Try both ways.
  d. click on Yes to confirm the new setting.
  
  e. now, Select the highest (32 bit) and click OK.
  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).
  f. click on Yes to confirm the new setting.

  Check Event Viewer for all related logs that could help us solve the problem.

  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

• Problems after installation with XP Service Pack 3 (screen please wait too long)

  After the automatic updates is ready to install and upgrade to SP3 of XP SP2, I have selected only quick installation and the installation progress. For a few minutes, everything seemed perfect, and I could see "Validating license... blah blah components loading... create restore point etc..". And after that, I was responsible for "System restart" I did. And then, the system displays a black screen of "Windows XP" showing "Please wait...". "and the screen is left as it is around 6-7 hours and the 256 Kbps, the internet was still on. After that, I wake up, find the same on the screen and close by the computer strength.

  After the reboot, I've seen the system configuration of Windows XP Professional SP2 to SP3. And one of my theme request then said that "he delivered a fall has resorted to previous settings.

  So, is my Windows corrupted, or incomplete installation? How will I know that the installation is successful? Please guide.

  Thank you

  Hi xploreaj,

  I noticed that often happens when a system has something like Norton or McAfee installed and that it has not been disabled prior to installation of the SP3.  If you encounter any other problems, then it is reasonable to assume that everything is ok.  However, you can also scan your system with Malwarebytes to see if there is no infections present which your current AV software has not picked up on. (how to use Malwarebytes: http://www.bleepingcomputer.com/virus-removal/how-to-use-malwarebytes-anti-malware-tutorial).

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software