Configure the connections for vanilla OBI Apps

Similar Questions

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• What is registration (URL to access the connection) for catalyst Partner Portal?

  What is registration (URL to access the connection) for catalyst Partner Portal?

  http://www.BusinessCatalyst.com/Admin/index.aspx?to=PartnerPortal

• Failed to create field when you configure the domain for the UCM 11 g

  Hi all
  
  After installing the Oracle Weblogic 10.3.3 and ECM Oracle 11g, I configure the domain for the AAU with SCW. The wizard still fails, and error log is:
  
  2010-06-09 11:40:25, 984 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - build error!
  Traceback (innermost last):
  "< Iostream >" file, line 17, in there?
  TypeError: unsupported or operand types +: 'NoneType' and 'str '.
  
  at org.python.core.Py.TypeError (unknown Source)
  at org.python.core.PyObject._basic_add (unknown Source)
  at org.python.core.PyObject._add (unknown Source)
  to org.python.pycode._pyx31.f$ 0 (< iostream >: 17)
  to org.python.pycode._pyx31.call_function (< iostream >)
  at org.python.core.PyTableCode.call (unknown Source)
  at org.python.core.PyCode.call (unknown Source)
  at org.python.core.Py.runCode (unknown Source)
  at org.python.util.PythonInterpreter.execfile (unknown Source)
  at org.python.util.PythonInterpreter.execfile (unknown Source)
  
  Does anyone have an idea how to fix? Thank you.
  
  David

  Hey David,

  I got it exactly the same problem when I installed a few weeks back. Fortunately, the solution is simple.

  Make sure that you run the config (config.cmd or config.sh) script that is located in the %MIDDLEWARE_HOME%/Oracle_ECM1/common/bin/ directory as opposed to the standard Wizard. This runs the wizard for creating domain with a different set of parameters so that the jython script that executes orders WLST at the end does not fail. If you are using windows, and using the shortcut it is start-> programs-> ECM Oracle 11g - Home1-> configure application server. One of our other guys had a problem where the entry "start in" for this shortcut was bad as well. On mine it is % MIDDLEWARE_HOME%/Oracle_ECM1/install/bin.

  Hope that helps,

  Andy Weaver - Senior Consultant software
  Fishbowl Solutions< http://www.fishbowlsolutions.com?wt.mc_id="L_Oracle_Consulting_amw_OTN_ECM">

  Published by: Andy Weaver on June 9, 2010 07:38
  Typo fixed.

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• Network connectivity error when you configure the server for vSphere

  I've just set up my first hypervisor, and naturally it became painfully obvious how much I have to learn.

  I met a problem that I don't know how to fix. When you configure the server, I have configured network settings manually in order to give him the good gateway, subnet mask and static IP address. Unfortunately, I still get "Failed" when I ping the DHCP server. ""

  Hope that the community will be able to guide me in this problem. I am sure it takes to understand this, so let me know what is needed and how to get more information. Thank you!

  Find the person who is responsible for the management of the switch and check which port is set to for example the VLAN you need. Depending on your setting of the port must be configured as an access port or a 802. 1 q port if you configure the VLAN ID on the ESXi host

  André

• PeopleTools Upgrade From 8.54 8.53 - change Wizard error when configuring the connection to the base

  Error is displayed: "Test Access ID and password failed."

  Second error: "unable to test the connection.

  I am upgrading from 8.53 to 8.54 and have problems with the "Database Wizard" configuration screen in the wizard to change.  I use SQL Server 2012 for the database, change Wizard is running on the new server of 8.54 applications.  I use the following information when defining the configuration screen:

  Type: Microsoft SQL Server

  DatabaseName: PSHRPROD

  Database server name: PTY2DBAREH002

  User name: {AdminUser}

  AccessID: {DB user who is administrator system right now}

  ConnectID: {valid connect ID which has been vailidated}

  Current homes:

  PS homepage: \\servername\PT_853

  PS App Home: file://servername/PT_853\\servername\PT_853

  PS Cust homepage: \\servername\PT_853

  New homes:

  PS-home: D:\rootPS\PT_854

  PS App Home: D:\rootPS\PS_APP_HOME

  PS Cust home: D:\rootPS\PS_CUST_HOME

  When I clck 'Next', I get errors...

  Error is displayed: "Test Access ID and password failed."

  Second error: "unable to test the connection.

  (1) I have validated that the path contains the path to 64-bit SQL tools.

  (2) the ODBC connection is set up under 64-bit and 'System' - it is also 32 bits of the system and user Setup, but also the 64-bit user.

  (3) I used the SQL Server sqlcmd.exe with access code and was able to connect from this machine and run the SQL commands.

  (4) I'm sure I've done the other stuff but don't remember.

  Please let me know if anyone experienced this or has any ideas.  I'm waiting on Oracle to react to the case after I opened it when their suggestion didn't work.

  Thank you

  Ryan

  I ended up working with Oracle Support, that had me do some things... I also did a thing on my own and with these changes, I am able to connect now.  If it does not please let me know... I tried a few other things that I don't think had no effect.

  (1) removed the Environment Variable "PS_SERVER_CFG" - I found in a document oracle that this could cause problems.  I have not set this manually, but Oracle says it is used to run data mover or SQR scripts outside of the process scheduler.  It must have been added as part of the installation so I'll add it again later.  This change did put a slight change to error messages, so it have some effect, but does not solve everything.

  (2) with the upgrade of 8.53 8.54 I had to add a 32-bit ODBC user DSN.  Even if change assistant 8.54 uses 64-bit, it seems that 8.53 connections are still serving who connects via ODBC 32-bit.

  (3) make sure that the paths configured in the wizard to change are not UNC, if they are matched with a drive and configure using readers.

  Good luck.

• App of Watch sounding abandons the connection to their iPhone app

  I used Smart sounding for about a year to control my hearing aid Linx2 with my iPhone and Apple Watch successfully. However, recently, the app shows interrupts the connection to the iPhone app. Hearing AIDS continue to work well with the iPhone, but they do not meet the application of the watch. Everyone knows about this problem? I reinstalled the apps and rebooted the on both devices. If! restart the watch, the app connects, but the connection is soon dropped. I don't know if the problem related to recent IOS upgrading or something else. Any thoughts on how to solve this problem will be appreciated. Thanks in advance!

  Have you tried devices pair the two UN - force to restart both of them and then re - pair again?

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Restart your Apple Watch - Apple Support

  Apple Apple Watch support - Setup & matching-

• Tecra S1: How to configure the connection of modem to dial upward

  Hi all

  Would someone be able to help me how I should configure the modem connection to dial upward, I tried to do it through the connection of the Wizard but it does not dial a number and I have no idea what could be the problem.

  Would be very grateful for help.
  Thanks, Nathan

  Hello

  Do you get any error messages?
  The Connection Wizard is very simple and I don t know what you could do wrong during the installation procedure.

  Hmmm please check the option in the properties of the modem so wait for dial tone before dialing is not checked.
  If everything is ok, try to create switched again and ensure that all parameters are good. Just test everything again.

• ASA5505: Configure the ASA for IPSec and SSL VPN?

  Hello-

  I currently have my 5505 for SSL AnyConnect VPN connections Setup.  Is it possible to set up also the 5505 for IPSec VPN connections?

  So, basically my ASA will be able to perform SSL and IPSec VPN tunnels, at the same time.

  Thank you!

  Kim,

  Yes, you can configure your ASA to support the AnyConnect VPN IPSec connections and at the same time.  In short, for the configuration of IPSec, you should configure at least a strategy ISAKMP, a set of IPSEC, encryption, tunnel group card processing and associated group policy.

  Matt

• How to configure the switch for JMS bridge

  Hello
  
  I tried with the selector option when working with several bridges, here is the scenario that I applied.
  
  Created five queues ( Q1, Q2, Q3, Q4, and Q5 ) and configured JMS bridge Destinations with each queue with the factory of unique connections ( CF1, CF2, CF3, CF4, and CF5 ) and baptized as D1, D2, D3, D4 and D5.
  Then created JMS JB2 bridges with D1 source and destination as D2. Similarly the JB3 as D1-D3, as D1-D4 JB4 and JB5 as D1-D5.
  And sector for each of the JB2 JB3 and JB4 JB5 as two, three, four and five respectively and reboot after the changes.
  
  Now I expect the following scenario to work
  By pushing the message to Q1/CF1 with two in the content of the message, so wait for the message to be delivered to Q2/CF2 through JB2, but messages is not moved by JB2.
  Similarly, message pushed to Q1/CF1 having three in the content of the message, so waiting for the message to be delivered to Q3/CF3 by JB3, but messages is not moved through JB3. Similar behavior for other messages with four and five in the content of the message.
  
  In the bridge configuration, selected QOS as "Atmost" - once.
  
  Note: all configurations were conducted in the same field and the WL version is 10.3.6.0 *
  
  The example message I am pushing to Q1/CF1 say 'two Test Data'* and expect to reach the queue Q2/CF2
  
  Concerning
  Venkata Madhu
  
  Published by: vv * Sep 12, 2012 13:05

  JMS selectors work normally om jms headers and not on the message.

  In my previous post, I see that WebLogic provides an extension "SELECTOR xpath" in this area, although I recommend using standard selectors when possible. See my previous post for more information on the syntax of the selector, etc.. The best resource on selectors is the javadoc for javax.jms.Message (http://docs.oracle.com/javaee/5/api/javax/jms/Message.html).

• Configure the listener for the data protection

  Hello world
  
  I'm currently caveat of data (physical standby database) for my database. But I have problem to configure the listening port on both servers. Can someone give me some examples?
  
  Oracle: 10g R2
  Operating systems: Windows
  Database primary ken10g
  backup database: ken10gbk
  
  Here are the contents of my files current listener on both servers:
  
  Primary server:
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) Primary_server)
  )
  )
  
  Backup server:
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = standby_server) (PORT = 1521))
  )
  )
  
  Thanks in advance.
  
  Ken

  This should always work on Oracle 10.

  ---------------------------

  Main example

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/network/admin/listener.ora
  # Generated by Oracle configuration tools.

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = host) (PORT = 1521))
  )
  )

  SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PRIMARY)
  (ORACLE_HOME=/u01/app/oracle/product/11.2.0)
  (GLOBAL_DBNAME = PRIMARY_DGMGRL. Host)))

  ADR_BASE_LISTENER = / u01/app/oracle

  Example of Eve

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/network/admin/listener.ora
  # Generated by Oracle configuration tools.

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = host) (PORT = 1521))
  )
  )

  SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = STANDBY)
  (ORACLE_HOME = u01/app/oracle/product/11.2.0)
  (GLOBAL_DBNAME = STANDBY_DGMGRL. Host)))

  ADR_BASE_LISTENER = / u01/app/oracle

• How to configure the adapter for network WRT54G wireless

  I downloaded the driver for a tenda usb adapter.  What else should I do to connect to the network WRT54G? I am currently connected via an ethernet cable. Running Windows/7.

  TIA,

  Phil

  OK, I found out how locate network and connect. The only problem was that I used the password instead of the key WEP.

• How to configure the VPN for Xperia phones

  I know that this does not work for many after the upgrade to KitKat but I just wanted to know how other users were using previously.

  Could you give me the settings or help me how to use these settings.

  VPN does not of course for a lot, but I guess that Sony will do something so he can fix it. But tell me how you used earlier. I am interested in knowing. Never used because I found it difficult. People told me that it is a sort of proxy to surf the net anonymously.

  Sachin4u wrote:

  ... VPN works of course not for many...

  Where did you get this info? I had this problem a few weeks in this forum channel and no useful response has been posted.

  But anyway: on Android 4.3, I added a VPN connection with the 'IPSec Xauth PSK' type and the pre-shared key. At the opening of the connection, I entered username and password. A few secconds later than the VPN connection to my home network with router Fritz Box has been implemented.

  Hopefully, I could help you, Titus

• How can I color code my events on the calendar for Windows 8 App?

  Hello

  I'm trying to color code the events on my calendar app, but I can't understand it. In my case, it's for my class so I can tell by the color automatically. Thank you

  Hi Xapitapalitos,

  I see that you want on the application of the calendar of events to color code. I'll help you with this problem.

  Let us, follow these steps to check the status.

  1 - Open calendar app, press the windows key + C.

  2 - Click settings and click on options.

  Refer to this article.

  Calendar: frequently asked questions: http://windows.microsoft.com/en-US/windows-8/calendar-faq

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.