Convert the remote computer fails

Similar Questions

• Error "Failed to connect to the remote computer" VMware View Client

  Hello everyone. I'm currently testing the package VMware view, but stuck on a problem, I can't understand.  I have already tried Googling every possible thing, but still came short on what to do.

  Currently I have:

  Server ESXi 3.5

  -vCenter Server

  -Connection to the server

  -3 swimming pools installed individual office xp host w/view agents

  At the moment, I seemed straight installation because I am able to connect using VMware client/portal with any full blown windows box anywhere in the internal network.  The problem I have is when I try to load the client software VMware view on a HP Neoware e90 box running windows xp embedded.  When I loaded the software and try to connect, I get the address connection server, authentication screen passes, but receives the error "the connection to the remote computer failed" when I try to select one of the desktop images in the list.

  I am capable of everything everywhere, ping from thin client to conn. Server, thin client desktop image and vice versa.  I am also able to RDP in the desktop images in the light client area but just can't understand why it won't pass this error above.  I tried to disable the firewall on everything, but it still doesn't seem to work.  Am I missing a simple step or has someone else has encountered this problem before? Any help would be greatly appreciated. Thank you.

  When you have disabled the firewall was that the firewall or service / network level? If it was at the level of the network, then you must disable the service and stop it. If you have the service, then can you get the logs of the client and post them. Often this info can indicate where he is faced with a problem.

  You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• Convert the remote physical computer Win98

  = & gt; SEE maybe INSTEAD: http://communities.vmware.com/message/1144827

  TOO MANY DEAD ENDS. I am very frustrated. Please help me find a new path, or convert a dead-end in a path of success!

  I need to move from a legacy Win98 to a virtual machine, bringing with it boot disk software that may not be installed or activated again.

  = #1 END =.

  I put the disc in a remote computer as boot drive. I can't convert Win98 remote physical computer to a virtual machine. )

  From VMware Workstation 6.5, I File/Import, connect to the remote computer successfully (name = michelle, username = guest, password = *). Then, I like the VMware Converter Agent needs to be installed temporarily on your remote computer. I then get a "failed to connect" error. In the vmware log file, I see the converter tries to a share named "\michelle\ADMIN$" there is no such action, and I don't know how you would set this to the top on the Win98 machine. This attempt will never succeed? In a help file, I read "the wizard of Conversion of VMware in Desktop allows you to import the following types of virtual and physical machines:"and Win98 is NOT in the list. "

  = #2 END =.

  Otherwise, I could build a v2I backup (.sv2i) and try to convert that. However, I vaguely remember trying to do this a few years ago, and it does not Win98. It may concern the converter does not support Win98

  = DEAD END #3 =.

  Otherwise, maybe I need to go back to a 'METHOD ZERO' tablecloth topic (http://communities.vmware.com/message/1140447#1140447) earlier suggested continuum "Port loses Win98 bootdisk to the virtual machine (guest)? ((I'm waiting on backup .qic below before taking the disc off another motherboard and put it in the host machine.))

  However, his method includes the use of vmware - vdiskmanager.exe. I do not have this program, and it appears to come only with the GSX server. All I have is VMware Workstation 6.5.X.

  = #4 END =.

  Otherwise... I'm currently a .qic BackupMyPC backup of the original diskette of Win98, now begin on another card mother. I hope that later have a Win98 VM with BackupMyPC and restore my backup of .qic original Win98 disk in the virtual machine. HOWEVER, I can't create the virtual Win98 machine. Other current running VMs can get to my CD, but this one won't boot off of it. I got the new VM at startup of a Win95 boot in DOS disk, and this virtual machine will now Boot C: in DOS mode. However, it does not recognize my CD-ROM as d:, whatever the configuration (image autodetect, d: or iso). So, I'm stuck again!

  = #5 END =.

  I noticed that Ghost 14 has its own ability to export to a VMware virtual image. However, Ghost 14 does not work under Win98.

  = DANGEROUS END #6 =.

  If I try to upgrade the operating system of the real legacy disk Win98, I'll probably break some features of other old tools I need, which are the reason why I can't start over again. Physically I could clone the drive, but it's probably another series of dead ends. The worst would be to get it all cloned and running to find the legacy of garbage tools...

  =================

  Thank you very much

  Helmut

  PS Where can I find vdiskmanager continuum 'method of zero?

  PS how to add this community to 'my communities '?

  You did say "or a second VM.  Of course, I don't know why a 'second' VM.  All I think that I need is a single machine virtual to run Acronis restore.  Why do I need TWO of them, or why I need this product LiveCD?

  Instead of overwrite your Windows XP guest, you can simply attach a new virtual disk... and replace this one... then remove the new virtual disk from VM WinXP and attach the same disk to your guest of win98 and start from there.

  It will be useful,

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• Converter Agent cannot be installed on the remote computer

  I receive the error (see attach file) then the converter tries to install the converter Agent on the remote computer.

  Any suggestion.

  Help, please.

  You can manually copy the agent and try to run it in a user session is the same credentials that the account used in step 1?

  The Agent MSI located in the folder of installation of Converter Standalone.

  You get only an error of the converter, but if more details can be found in this way.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• the software on the remote computer seems to be incompatible with this version of screen sharing

  Hello

  I use Apple Remote Desktop (see 3.8) to a MacBook Pro 15 of the retina to access an iMAC 27 5 k. I get the following error message

  "Connection failed for 'iMac_5K'.

  The software on the remote computer seems to be incompatible with this version of screen sharing.

  MacBook pro screen resolution is 1920 x 1200

  the iMac 5K resolution is 3200 x 1800

  Thank you!

  Hemdani

  What is your question? The message seems pretty clear...

• Task Scheduler: the remote computer was not pop...

  Task Scheduler: the remote computer could not be found appears when you try to start the Scheduler task to the top program and I am not able defrag my computer either because he says that task scheduler is not running, also failed to start other actions when the Task Manager is open and I am able to remove the connection to another task of computer that is there.

  Click the Start button, type in Services, and then click the Services icon.

  Find the Task Scheduler in the list and check that it is running. If not right click and press start.

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• This computer can't connect to the remote computer

  I have a Windows server 2003, and I am unable to distance on the server. The error message I get is 'this computer cannot connect to the remote computer.

  • I did a netstat - year to see if port 3389 is listening, does not see an entry for the port. I have
  • I checked the services and that they perform a remote procedure call (RPC)
  • Restarted the server several times.

  I can remote into other servers of this machine if I log in locally.

  Please advise,

  Michael McDaniel

  301-763-1160 off.

  Have you checked the firewall? Could be a firewall anti-virus that keeps you from log, as that happened to someone else on this forum recently.

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• How can I activate the remote computer to power saving Mode monitor?

  I am a technician in a small private company and it is my duty to keep all desktop computers works very well.
  Desktop computers:

  • are the Dell Optiplex GX260
  • Run Windows XP SP3
  • have Dell 17 "monitors
  • with Intel Pentium 4 (2.4 Ghz) processor with 1 GB RAM

  I do my job after working hours. I connect to them with my laptop (running Windows 7) and check their conditions, one by one. Now, my employer comes to know that when I do this whole process monitors for desktop computers continue to run. As it is not put in place a very large company and electricity and the price of fuel in Pakistan are very high. So, he asked me to find a way to turn the monitors to the power saving mode, when I do my work. In this way, it will be significant energy savings and fund savings in monthly bills. So, can someone please tell me How do I turn on monitor of the remote computer to the power saving mode?

  There are several ways to handle this.

  #1-have affected the power turn on their monitors, but let run PC
  #2-click Start > Control Panel > Power Options and choose how long it is before the screen turns off. Once your activity on their machine is complete, then will kick time.
  #3-you say that you connect to their machines to check their conditions... whatever that means exactly. You can map their computer management console directly to your machine and I * think * he didn't wake up the monitor.

  I hope this helps.

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.