Custom VIBs WARNING

Similar Questions

• Patching ESXi 5.1 U1 U2-> custom VIBs

  Hi guys,.

  I have an ESXi host I plan to patch. Patching of hosts in the past never gave me trouble, but this host is different because I'm under additional VIBs thereon (LSI PMI provider for example).

  If I use the following command:

  • software esxcli vib install /vmfs/volumes/datastoreNameHere/fileNameHere.zip d

  My custom VIBs will disappear when the hotfix is applied?

  Thank you!

  The installation of a lot of patches will replace the vibs included in the package, so if there are additional vibs will not be affected. In any case, what you can do to do this is to run the command with the -dry - run option to find out what will be changed. Other use install , you can also run the command esxcli with Update replacing vibs that have been updated.

  André

• Customer service WARNING Adobe Stock.

  Someone had a bit of luck with the Stock of Adobe customer service.  I never had those frustrating discussions with after-sales service.  I thought that my cable provider was bad, but Adobe takes Customer Service SAID to a new level.  This will make a great Blogg for dissatisfied customers.

  After trying to cancel the Stock of Adobe online, as it tells you to do, he said I had to pay for the last 12 months, is not the free trial of s, I didn't want to pay the annual dues and so was one of the options that he said I could take a two month free.  I thought that much, I can now communicate with the service the customer and get cancelled service... BAD... DO NOT TAKE THIS OPTION, IT OF A TRAP!

  After constantly trying to explain to people in chat one after another in line, we me constantly that I would have an answer in 3 days, seems Adobe tell us delays are set in stone, do not apply to their own staff.  The first time I contacted them on May 19, I was told was to be arbitrated 'senior team level' and ' Sanjay: this is ID for reference 0218704304 case.»  Sanjay: you will receive a response within 2-3 business days. " ... waited... waited... waited some more... then wasted most of my time by contacting again on May 26... (if my calculations are correct, it is more than 3 days, and I thought they'd contact me... wonder how long it would have been if I had simply not contacted them)... After repeated again once the problem and the problem I've had with cancellation which I'm sure was within 30 days... so I ' Shankar: I've also personally will follow this case now to the end and get back to you within 24 to 48 hours "... waited... waited... waited some more... then wasted more of my time by contacting again on 8 June and after asking again for it can be cancelled... next billing would be taken on June 26... ." Sarath Kumar: I just suggested that an e-mail was sent to the concerned team already and you will get a response on this within 24 hours. » ..... Just suggested... whatever that means, that he was never sent to hope I'd go... FINALLY, AN EMAIL FROM ADOBE... 10 June... Hmmm still not 24 hours, looks all broken so promise far... response... ." Clive, we are sorry to inform you that you have accepted the 02 month credit to continue the annual commitment, where our team refused your request to cancel the subscription without cancellation fee. » .. .Yep person reads any of my emails or discussions, the only reason why I took that was so I could cancel, pointed out that I've never used the product since before trying to cancel... why I would extend for 12 months to never use a product! The email said... good-bye your case history or to reopen the case, connect to the Adobe Support Portal online. .... Ah yes there you go given inaccurate information again... sounds good... click on the link... .no option to reopen a case!!  Why the mean if it isn't true... ALSO at the bottom of the email is "for a list of support phone numbers, please visit our Contact Page."... ". Click on the link... NO PHONE NUMBER!... Why put it if it's not true!  Sounds just right!  Once again... the customer service...

  12 June... After going through explaining once again... I should just have written and cut and pasted it... they say ' Valapureddygari: I saw climbed case has already been closed since our team refused your request to cancel the subscription without cancellation fee. " .... the third line of this transcription I say... "I want that reopening...". "... so he said in the mail that I can reopen the file, just click on the link, now they say it's closed... so they go to their supervisor and low off the coast and this is... I should have been a middle...

  Valapureddygari: I certainly understand your concern, and it would have been the same if I were in your shoes. However, I'll have the case scope within our senior team to check and fix the problem for you.

  Valapureddygari: Please be informed that you will get the confirmation email within 2-3 working days of our senior team.

  Something different... they say that they will load for me... 3 days, that's ok... I have until 24 June, before I was charged a month... I wait... and wait... 17 June... .contact them after not getting is not a response in 3 days... ' Mahesh Okay I see that your case is in progress, please wait for 2-3 days... ". how... why... how they have a value of $10billion I don't know... oh yes I get everyone to subscribe, then make it impossible to cancel... I ask for $147 it is a service I want to use and have never since the trial period be waived...

  So I wait... and wait... no answer... no answer... now, it's June 23 and I cancel the subscription and pay $147 fresh cancellation otherwise I will be charged a full month and be out of Pocket by 50% from a month if I don't and he continues by dragging... and I contact them again... this time they say... Manu: I see that your case # 0218894647 is back and then there is a request sent to the relevant team to check the exception, you will get the answer within 24 to 48 hours. Once again... Manu: Clive, the case had come up on the same word, but it has been re-climbing to the team of top-level for refund exception, once the top-level team will check, they will reply you by e-mail.

  All they would have to do is send in time, they say... and tell me what's going on... If you say only 2 or 3 days... email within 2-3 days... It is not difficult...

  But here I am now almost 2 months on and get no where... no one read the information and no one seems interested... I paid cancellation fees... see if I get it refunded... What's the bet on a response saying... ." We were going to cancel your service, but it seems that you already have, we're sorry to have lost you as a customer, we hope you will join us soon... »

  I asked a customer email or contact with a feeder Services number and was denied... I think that I've been reasonable and more understanding, but seems that gets you no where...

  So I hope you read this and be warned... . NOT to TRY ANY ADOBE PRODUCT TRIAL... seems they say nothing of what they're saying...

  Let me know if you have the best advice.

  Sorry to hear that you had a frustrating experience.  This issue will be resolved with the teams concerned to ensure that any follow-up occurs as scheduled.

  A refund for early cancellation fee has been processed and you should receive this within 3-5 working days.

  Kind regards

  Bev

• Loops of startup Boot VMware 5.5.0 on F2 and F11 line display

  I just tried to update / one of my VMware hosts migrate from version 4.1 to 5.5.0. When I restart the system once the upgrade has completed it gets regarding the final normal screen display which must show the name of the server address IP etc and the line inside who has 'F2 '....      F11... ». What happens is that it continually flashes only the 'F2...»  F11... " line. If I turned off the server and restart start VMware 4.1 successfully. I have not lost any data.  Whereas the upgrade / migration says it cannot restore. I am impressed that somehow mine did.

  Any ideas how I can get to upgrade properly and start?

  During the upgrade the only error message I get is a "Custom VIBs warning' during the prechecks.

  < 3RD_PARTY_SOFTWARE WARNING: host contains VIB (s) third party having no substitute on the ISO.

  ["vmware-esx-pilots-net-igb", "vmware-esx-epsec-vfile"] >

  I continued with the migration by ignoring these.

  VIB "vmware-esx-epsec-vfile" I think East of vShield Endpoint that could be the cause of the problem. The original server was using Trend Micro deep Security which I removed and restore the server. I did not delete vShield.

  Do you know how I can remove this VIB? Removing it will cause a problem?

  VIB "vmware-esx-pilots-net-igb" I think will require just download good and their installation to version 5.5.

  Should what steps I take to get 5.5.0 upward and work?

  Concerning

  Ron

  I decided to do a fresh install and add servers.

• Custom list VIB in ESX 4.1 hosts?

  Hi people,

  Is there a quick way to enumerate all VIB custom in ESX 4.1 hosts running data center?

  I got about 30 VMhost and wondering if it is possible to enumerate all of these custom VIb before I level to ESXi.

  Thank you.

  As you can see on the returned object, there is no piece of software in there.

  The vibs can be registered with this method in vSphere 4

• Upgrade from 5.1 to 5.5 - DELL Incompatible ISO custom ESXi

  Hello

  When attempting to upgrade a DELL PowerEdge server running ESXi 5.1 to 5.5, Manager of update of the 'Inconsistent' due to Broadcom VIB reports.

  Please find attached the screenshot.  It seems that the existing 5.1 ESXi host is already launched VIB even as in ISO image to measure.

  

  Thank you

  You can also choose to migrate by force and it will run the installation.  I think after that he will keep the existing VIBs that are installed, but I have not tested on.

  Using the option migrate from Force could cause the host improved to not start successfully, to expose the system instability or lose functionality. If you upgrade a host support custom VIBs 5.0.x, which are not included in the ESXi ISO Installer are migrated. There is no need to select the option migrate by Force. See upgrading of the hosts that have third-party custom VIBs.

  VMware vSphere 5.1

  VMware KB: upgrade to ESXi 5.x generates the warning: host contains third VIB (s)

• The upgrade to ESXi 5.1 U1 5.5 U1 error (or 5.1 U2, same error) - could not parse XML VIB, error code of 100 figures

  Hello

  Today, it is the first day in my life from VMware that I came across an error trying to update with the CD on the server... as I suspect a false image I tried the HP both standard images - the same error.

  Unfortunately, neither the VMware KB or Google gave me a research... but maybe you can give me a hint :-) (ok, honestly I didn't enter the 100-digit error code).

  See you soon!

  Hello

  did you do an upgrade installation or real news?

  y at - it no custom VIB installed?

  I think you should install new esx 5.5 u1 and not to do an upgrade. You can keep the data store, if you want, but if possible just to do a new install.

• ESXi 4.1 U1 to 5.0 - Clarifications upgrade upgrade

  Thanks to ESXi 4.1 U1, I get the now familiar 'warning' custom VIBs are installed:

  • OEM-VMware-ESX-Drives-net-vxge
  • OEM-VMware-ESX-Drives-SCSI-3W-9xxx

  The guests I want to spend to ESXi 5.0 fortunately do not have this hardware.  Upgrade options I have are:

  • Force to migrate ESXi, preserve the VMFS datastore
  • Upgrade to ESXi, preserve the VMFS datastore

  Question 1: Which option of upgrade would you give guys to think that I use for the upgrade to ESXi 5.0 and preserve my datastore (best practices)?  The formulation "moving force" doesn't sound good.

  Question 2: Is it true that none of these options will spend my store of data existing VMFS 3.0 to 5.0?

  The option "Force migrate" will make an upgrade to preserve the VMFS and migrating your settings (network configuration,...) while the installation option will install an own ESXi - also with the VMFS intact - but without migrate your configuration.

  André

• Lollipop is coming

  Is 5 Android entry for lenovo s960 vibe x and when?

  http://support.Lenovo.com/in/Hi/documents/ht101396
  According to the lollipop lenovo matrix custom Vibe X receive updated of the lollipop.

• Ntoskrnl.exe + fix 57150

  I'm getting errors blue screen can anyone help
  They seem especially when the computer attempts to enter the mode 'sleep'
  Mini040113 - 01.dmp PAGE_FAULT_IN_NONPAGED_AREA 04/01/2013-13:18:42 0 x 00000050 fffffa60 '0e12d000 00000000 00000000' fffff800' 0353752e 00000000 00000000' ntoskrnl.exe ntoskrnl.exe 57150 + x 64 + C:\Windows\Minidump\Mini040113-01.dmp 4 15 6002 274 656 57150 ntoskrnl.exe

  Mini032913 - 01.dmp PAGE_FAULT_IN_NONPAGED_AREA 29/03/2013-02:13:11 0 x 00000050 fffffa60 '0fd14000 00000000 00000000' fffff800' 034f852e 00000000 00000000' ntoskrnl.exe ntoskrnl.exe 57150 + x 64 + C:\Windows\Minidump\Mini032913-01.dmp 4 15 6002 274 656 57150 ntoskrnl.exe

  Mini032713 - 01.dmp PAGE_FAULT_IN_NONPAGED_AREA 27/03/2013-22:51:30 0 x 00000050 fffffa60 '0bd37000 00000000 00000000' fffff800' 034f352e 00000000'00000000 SiRemFil.sys SiRemFil.sys + ab66000 x 64 + C:\Windows\Minidump\Mini032713-01.dmp 4 15 6002 274 656 57150 ntoskrnl.exe

  I updated all my drivers and checked the hard drive for errors

  Hi Garydp,

  According to the description, it seems that you have found an error message "ntoskrnl.exe" is missing. I'll be happy to help you in this problem.

  -Did you do changes on the computer before this problem?

  Method 1: I suggest to disconnect all external devices except the keyboard and mouse, then try to start the computer.

  Method 2: Start the computer in last know check and good configuration if this can help.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3: I also suggest you to follow the steps in the article and check if that helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  For reference:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Method 4: If the problem persists, perform a system restore to the windows with the DVD of Windows Vista recovery environment.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  For reference:

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in aWindows.old folder on the partition you installed Windows Vista. However, you should always back up the files. If you have encrypted files, you may not be able to access after installation of Windows Vista. If you have backed up your data files and then restored after Windows Vista installation, you can delete the Windows.old folder.

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Center solutions HP, reboot needed, every time, I have connection to windows, even when the computer restarted.

  Hello

  I have a desktop HP Pavilion p6-2102edm.

  Windows 7 x 64 Home Premium

  Around 0:05 AM GMT, errors have occurred. HP Solution Center asked to restart the computer. It was the first time, right now, I thought that's probably maintenance, so I restarted my computer and he returned once again, without ever showing the icon Solution Center HP on my taskbar, just a notification bar to come, needing a reboot. He was stuck in this routine.

  Now, after the restart for the fifth time, I get very frustrated and unable to understand the cause of this problem...

  The only thing I could get out of it, as as I do as a study of game development is that there is a NullReferenceException thrown, but in addition, I am at a total loss, I hope someone can shed some light on this...

  ------------------------------------------------------------------------------------

  My Windows application event logs / are evidence of this.

  Level: Date: Source: event ID:

  Services customer HP WARNING 11/27/2012 01:17 0

  The description for event ID Services 0 HP source customer is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Received unknown service request.

  -------------------------------------------------------------------------------------

  My of Application and Services/Hewlett-Packard event logs show that.

  Level: Date: Source: event ID:

  Error 11/27/2012 01:04 HPSF.exe 2000

  Error HP ID:-2147467261 at HP. SupportFramework.Utilities.CustomerExperience.HPSASession.AddNavigationProperties)
  Message: The object Reference not set to an instance of an object.
  StackTrace: At HP. SupportFramework.Utilities.CustomerExperience.HPSASession.AddNavigationProperties)
  Source: HP. SupportFramework.Utilities

  Name: HPSF.exe
  Version: 07.00.01.01
  Path: C:\Program Files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Format:-en-US
  RAM: 6124
  Use of the RAM:
  TargetSite: HP. SupportFramework.HPSFReporting._Property [AddNavigationProperties()]

  Kind regards

  Tolga Kavi

  Hello

  I recommend you to download the latest version of the HP Support Assistant software on this site:

  http://www.hp.com/go/hpsupportassistant.

  Then, uninstall the Add/Remove programs function HPSA and install the latest application that already download you it from the link above.

  This should fix the problem for you.

  Thank you

• Need help, troubleshooting a BSOD

  Hello and thanks in advance for any help!

  I just built this new computer a month - 07/04/2013.  I got a blue screen about once a week due to errors of State on extended/incompatible standby power, so it's more annoying than anything else.  I'll post one of the errors right after the specs:

  Intel i7 3770 k @ 3.5 Ghz processor
  16 GB of Corsair Vengeance RAM
  Motherboard Asus Maximus V Extreme
  2 x EVGA GTX 670 FTW + video 4 GB cards
  Good card his Blaster Z
  PSU Corsair HX850
  Samsung 840 Pro 128 GB SSD
  WD Black 1 TB HARD drive
  Cooler Cooler Master 212 Evo
  Asus DVD writer
  Windows 7 Professional 64 bit

  The most recent minidump:

  Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\Readable dump files\050213-9968 - 01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * C:\Symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7601.18113.amd64fre.win7sp1_gdr.130318 - 1533
  Computer name:
  Kernel base = 0xfffff800'0304 has 000 PsLoadedModuleList = 0xfffff800'0328 670 d
  The debugging session: 10:58:22.742 Thu May 2, 2013 (UTC - 05:00)
  System Uptime: 0 days 8:36:06.585
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .............................................
  Loading user symbols
  Loading unloaded module list
  ..........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  9F error checking, {3, fffffa800d6a3890, fffff80004a243d8, fffffa80128f9010}

  Probably caused by: ACPI.sys

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000003, a device object has been blocking an Irp for too long
  Arg2: fffffa800d6a3890, physical device from the stack object
  Arg3: fffff80004a243d8, functional device object of the stack
  Arg4: fffffa80128f9010, blocked IRP

  Debugging information:
  ------------------

  OVERLAPPED_MODULE: Address regions for 'hiber_iaStor' and 'hiber_iaStor' overlap

  DRVPOWERSTATE_SUBCODE: 3

  IRP_ADDRESS: fffffa80128f9010

  DEVICE_OBJECT: fffffa800d60e330

  DRIVER_OBJECT: fffffa800d617060

  Nom_image: ACPI.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79294

  MODULE_NAME: ACPI

  FAULTING_MODULE: fffff88001135000 ACPI

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X9F

  Nom_processus: System

  CURRENT_IRQL: 2

  STACK_TEXT:
  fffff800 '04-24388 fffff800' 0312f8c2: 00000000' 0000009f 00000000 00000003' fffffa80 '0d6a3890 fffff800' 04a243d8: nt! KeBugCheckEx
  fffff800 '04-24390 fffff800' 030ca84c: fffff800 '04a244c0 fffff800' 04a244c0 00000000'00000000 00000000'00000001: nt! : FNODOBFM: 'string' + 0x33af0
  fffff800 '04-24430 fffff800' 030ca6e6: fffffa80 '12ce4b88 fffffa80' 12ce4b88 00000000'00000000 00000000'00000000: nt! KiProcessTimerDpcTable + 0x6c
  fffff800 '04a244a0 fffff800' 030ca5ce: 00000048' 1985ebba fffff800 '04a24b18 00000000' 001e4a00 fffff800'0323 d 288: nt! KiProcessExpiredTimerList + 0xc6
  fffff800 '04a24af0 fffff800' 030ca3b7: 00000018' b71301c2 00000018' 001e4a00 00000018' b713011c 00000000' 00000000: nt! KiTimerExpiration + 0x1be
  fffff800 '04a24b90 fffff800' 030b790a: fffff800 '0323ae80 fffff800' 03248cc0 00000000'00000002 fffff800' 00000000: nt! KiRetireDpcList + 0 x 277
  fffff800'04a24c40 00000000' 00000000: fffff800'04 has 25000 fffff800 '04a1f000 fffff800' 04a24c00 00000000' 00000000: nt! KiIdleLoop + 0x5a

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: X64_0x9F_3_IMAGE_ACPI.sys

  BUCKET_ID: X64_0x9F_3_IMAGE_ACPI.sys

  Follow-up: MachineOwner
  ---------

  I've updated the BIOS, video drivers, sound card drivers.  I had the exclamation on 2 "devices, Bluetooth unknown" that I went and actually stop points in the BIOS to get rid of them.  Any help would be appreciated!  A work-around, I'm considering is all simply not using sleep/turn into hibernation and just off... or just leaving perpetually.  I would have obviously preferred a solution.

  Thank you!

  Hello

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

   

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Thank you.

• Computer laptop bluescreens with BUGCODE_USB_DRIVER after you have closed the lid

  My HP with Windows 7 X 64 laptop recently started giving the bluescreens with
  BUGCODE_USB_DRIVER immediately after I close the lid and open new, as well as when the computer tries to stop.
  I don't know what type of newspapers I can post to display more clearly the problem or where I can find them, guidance would be appreciated on this topic.

  Here are the specifications of my laptop: http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06b/321957-321957-3329744-64354-64354-5186811-5218648.html?dnr=1

  Hello

  Thanks for posting this question in the Microsoft Community.

  1. what security software is installed?

  2. don't you make changes to the computer before this problem?

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Need help with screen Blus of death (BSOD) on my computer toshiba laptop

  Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

  If someone could point me in the direction of a few possible ways to get this problem.

  guys do you propose I make to the store and see if they can check it out, what would I need if I did.

  I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

  im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

  -leoknighted

  PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

  Hello

  I suggest you to refer to this article to check if this help.

   

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need help with this question, we will be happy to offer you our help.

• How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on

  How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on.

  I got this without my notice:
  Administrator
  Administrator.User
  Administrator.User.000
  Now, I want to go back to my old files with the first administrator account. Also, I would like to know why.

  Hello

  Thanks for the reply.

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need assistance with any windows problem. We will be happy to help you.