D6400 firmware through engineering 1.0.1.22?

Similar Questions

• Rocket of freezing to rebuild the database after the firmware update

  Hello

  I used a Sansa Fuze since May this year, and so far I'm happy with it. If it were not for the updates of the firmware works do not somehow. I don't know what I'm doing wrong, but every time after you have installed the firmware newest, the player crashes to rebuild its database. So I'm stuck with what version of the firmware was updated in May 2009. Fortunately, I discovered the trick to read data from the player despite his messy state (in other words, put on 'Hold' and plug it into the computer by pressing on |)<), so="" that="" i="" could="" reinstall="" the="" old="" firmware's="" .bin="" file="" manually.="" removing="" the="" extra="" 8="" gig="" microsdhc="" card="" i="" bought="" with="" the="" player="" didn't="" change="" anything="" either.="" however="" this="" shouldn't="" be="" i="" think,="" and="" frankly,="" it's="" been="" annoying="" the="" heck="" out="" of="" me="" since="" the="" first="" time="" i="" tried="" updating="" my="" player's="" firmware.="" first="" i="" thought="" it="" was="" just="" because="" i="" didn't="" use="" sansa's="" updater="" tool,="" but="" instead="" downloaded="" the="" zipped="" update="" installer="" manually.="" but="" even="" when="" i="" installed="" the="" official="" program="" on="" my="" windows="" machine="" yesterday="" and="" updated="" my="" player's="" firmware="" through="" it,="" the="" player="" gets="" stuck.="" interestingly="" however,="" prior="" to="" updating="" the="" firmware,="" i="" formatted="" the="" player,="" and="" when="" i="" switched="" it="" on="" the="" first="" time="" after="" the="" update,="" while="" still="" not="" carrying="" any="" data,="" the="" rebuilding="" of="" the="" (empty)="" playlist="" worked="" fine.="" only="" when="" i="" copied="" my="" songs="" back="" on="" it="" today,="" i="" ran="" into="" the="" same="" difficulties="" as="" before.="" so="" what="" i'm="" going="" to="" do="" now="" is="" what="" i've="" done="" before,="" and="" manually="" reinstall="" the="" old="">

  Frustratedly yours

  carbeck

  OK, so I got another idea just half an hour ago and plugged in my drive. My computer would easily display the files it contains, without having to resort to tricks like the one described in my previous post above. I thought that since I read that the "rocket" is a bit picky about the format of the tags, I look to those of mp3tag. I went and spent all the tags to ID3v2.3 (iso-8859-1, how backward ), delete all the comments in the files and also adjusted the number of tag to include leading zeros instead of the format "1/n. Indeed, my drive didn't have the hiccups more after the reboot. Files that were previously listed as 'Unknown' is classified in their good artist and album and probably all of the tags appear in the correct order. Yay!

• LaserJet CP3505: Hp Laserjet CP3505 firmware update is blocked at 6/6 A / F

  Tried to update firmware through Windows Explorer and an IP address. The printer does not complete the update, it hangs at 6/6a / F on the Panel of the printer. Even after the power of recycling, he ended by in even!

  Please help me get back the use of the printer.

  Do not use the button until the memory starts counting from the screen.  When you press the button wait until all 3 lights turn on solid to continue the procedure.

• WRT54G v1.0 Firmware upgrade

  I'm trying to update the firmware for a WRT54G v1.0 (I think, it doesn't have a version # on the sticker).  I downloaded the firmware (through a google cache to the linksys support page cuz link is down).  I have unziped the file. I did a hard reset (60.60.60).  Then I connected to my router (admin pass so I don't know the reset worked) went to "system > Firmware update > Upgrade" opened the dialog box.  Then I bowsed to the .bin file found he opened it and clicked on 'Upgrade'... nothing has happened... waited... still nothing, no progress bar, nothing, nada, neah... whats up?

  I can still access the router as usual and ect is just the dialog box upgrade that seems broken.

  So, any ideas?

  PcCowboy (Caleb)

  (Mod Note: edited post for the respect of the directive.) (Thank you!)

  

  Well since no one seems to know the cause of my problem, I guess that ill just go to the site www.dd-wrt.com, they prob help and they clam to get the best results in their firmware.

  Ta - your.

  PcCowboy

• HP Envy 114 and Firmware update

  Hi all

  I just got my 114 desire and it was very easy to install, it works.

  Everything works great and it connects to the internet (wifi) very well.

  The only problem I have is when I try to check the update of the firmware through the screen touchscreen printer I got the following error message (there is an English translation of Italian language):

  No link available. The printer is not connected to the network.

  It's strange, because the printer is actually connected to the Internet and I can use ePrint, eFax etc... no problem

  Any idea?

  Thank you!!

  I solved it in the meantime.

  From the front panel of the printer, I erased all the web settings and services.

  Then I ran the installer again... and this time I can check the update without problem.

  Thanks for the help!

  See you soon

• Problem with updating the firmware/kernel of 4305G

  Hi forum,

  I searched this forum for similar cases, but can't find an answer.

  I have firmware and the kernel update files for the DPM G 4305 (5.2.0_FCS_4305.fwimg & DMPkernel_A2_4305.tivella) and tried all means known to me to upgrade the DMP, but without success.

  We have DMS 5.2. I tried the upgrade through the DMM, / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-margin : 0 cm ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} DMM - DSM and even with the IIS web server that I found as upgrade on this forum, but still no joy.

  To be more specific, try with IIS web server, I downloaded the file in the root folder and used this example below:

  (http://10.10.10.2:7777 / set_param? mng.command = start + upgrade + kernel + http://10.10.10.10/DMPkernel_A1_4300.tivella) I've only had a window to enter the username and password of the DMP and then nothing happens.

  I double that the DPM has the IP address of the DMM to centralized management, DMM - DSM server time-out set at 300 dry, DPM Web account as well as the user/pass in DMM, DPM Service account same user/pass and also active FTP.

  The strange thing is that in DMM, it shows G 4305 such that registered for a while, but after awhile it registers outside, and the status changes to red X. During this brief period, I tired to upgrade the DMP in the Action drop-down list menu, although he did nothing.

  I know kernel must be applied first, then the firmware. For the sake of the argument, I improved the 4400 G firmware through the digital multimeter with no problems at all.

  The name of the exact model is: DMP - 4305G - 5.1 - K9

  If you need me to download and/or add additional info to this question, don't tell.

  Any input will be greatly appreciated!

  Maxim

  OK, I tested a DMP - 4305G here who was 5.0.

  I upgraded to first 5.0 to 5.1.  The upgrade was successful.

  Then, I upgraded to 5.1 to 5.2.  The upgrade was successful.

  You may need to capture a trace of sniffer to see what is

  current.  And use the same steps and legends that I use

  to verify everything in your configuration.

  T.

  RECREATE THE NOTES:

  ===============

  DMP = 10.10.10.10

  WEB server = 20.20.20.20

  User = admin

  Password = default

  Webserver = Apache (I don't use IIS)

  5.1 web site Directory Server = Software/dms-images/DMP-images/5.1/

  5.1 the firmware kernel file = DMPkernel_A1_4305.tivella

  5.2 web Directory Server = Software/dms-images/DMP-images/5.2/FCS/5.2.0_FCS_4305/

  5.2 the firmware kernel file = DMPkernel_A2_4305.tivella

  UPGRADE from 5.0 to 5.1 KERNEL *.

  STEP #1

  http://admin: [email protected] / * */:7777/get_param?p=sinfo.version

  T_STRING Linux version 2.4.22 sInfo.version ([email protected] / * /) (gcc version 3.3.2) #1 Fri 19 Oct 11:00:01 PDT 2007

  STEP #2

  http://admin: [email protected] / * /: [email protected] / * / [email protected] / * * / _4305.tivella

  STEP #3

  http://admin: [email protected] / * */:7777/get_param?p=init.upg*

  init.upg_context T_STRING Upgrade (core) succeeded

  init.upg_percent T_LONG 0

  init.upg_status T_STRING non active Firmware update

  STEP #4

  http://admin: [email protected] / * */:7777/get_param?p=sinfo.version

  T_STRING Linux version 2.4.22 sInfo.version ([email protected] / * /-desktop) (gcc version 3.3.2) #1 Tue Nov 18 14:48:57 this 2008

  > Success upgraded to 5.1 kernel

  UPGRADE from 5.1 to 5.2 KERNEL *.

  STEP #1

  http://admin: [email protected] / * */:7777/get_param?p=sinfo.version

  T_STRING Linux version 2.4.22 sInfo.version ([email protected] / * /-desktop) (gcc version 3.3.2) #1 Tue Nov 18 14:48:57 this 2008

  STEP #2

  http://admin: [email protected] / * /: [email protected] / * / [email protected] / * */FCS_4305%2FDMPkernel_A2_4305.tivella

  STEP #3

  http://admin: [email protected] / * */:7777/get_param?p=init.upg*

  init.upg_context T_STRING Upgrade (core) succeeded

  init.upg_percent T_LONG 0

  init.upg_status T_STRING non active Firmware update

  STEP #4

  http://admin: [email protected] / * */:7777/get_param?p=sinfo.version

  T_STRING Linux version 2.4.22 sInfo.version ([email protected] / * /) (gcc version 3.3.2) #1 Wed Dec 9 22:10:26 PST 2009

  > Success upgraded to 5.2 kernel

• Internet light lights up orange R7000

  The internet light will change from white to orange and I have no internet access through the router. This has happened 3 times.
  1 twice I had to do a hard reset if the hole in the back of the router, enter my settings again and it worked fine for a few days.
  The last time, that did not work.
  I usurped the computers MAC address as support Netgear says, still no go.
  Through engineering steps in shooting penalty and entered the MAC address of the router manually, box and now it works again?
  Something is wrong with this router. I don't want to keep doing this.
  I have V1.0.3.60_1.1.27 firmware, but he did it with an earlier version.
  Any suggestions?

  Thank you Mr buzz and Dshed.
  Check the parameters of traffic control.
  My modem is a Motorola 6141 which I will change to a 6183 Arris/Motorola when the modem is released for retail sale in a few weeks.
  The amber light thing came back 3 hours ago. This time I had to take the router completely out of the loop, do a hard reset, it let it harden for an hour to get it going again.
  I bought the Dell R7000 using a couple of their discount coupons, over 6 months ago.so called to get a good number of replacement and warranty Netgear.
  Much to my surprise, even though it was past their normal 30-day replacement period, they'll send me a new R7000 early next week.
  I really like this router as I get on the shop the 2.4, 5.0 and bands AC, I thought possible, but this amber light thing gets very frustrating.

• M83 2.5 inch SSD installation

  ATTENTION: This is my first endeavor material addition Introduction experimental set-up in Introduction to the laboratory of engineering computer science and make a cable crossed in Introduction to networking laboratory.

  Computer type: 10:00

  I am trying to install a secondary drive. It is an essential M550 2.5 inch SSD. I'm looking inside the box for the second disc, I see (1) power cord with two plugs and (2) a cord with a plug of SATA data transfer.

  (1) a CAP is currently hung in the main HARD drive. The other is not plugged, but use very close to the second drive Bay which is - I guess - is available for the secondary drive.

  (2) the CAP is currently hanging in the main HARD drive.

  Therefore, I am confused. I'm blind and lack a second plug for the SATA cord to go to the SSD data transfer? Data transfer on the power supply cord is like a cable POE? Do I need to buy a cable to connect to a place for the SSD? All the guides basically say, ' insert the disc, disk, put on the bevel, put the cover, model in turn computer connects, launch the installation of the firmware through windows, "which is not useful when it seems that I'm missing a data transfer cable.

  Thanks for any help anyone can provide!

  -min.

  Problem solved. My SSD did not come with the appropriate cable and I found where to hang the cable again up to. Don't know how to close a post here...

• Designjet T120: Can't trace file size D (T120)-specific PDF drawing

  Hi all

  Having problems trying to draw a PDF specific drawing D-size (SolidWorks saves) on our plotter T120.  It plots just fine in the sizes A, B and C, but when I try D, it just hangs, then times out with an error.  I tried to update drivers, run the HP diagnostic utility, run the utility from Microsoft, etc. but nothing seems to work.  I traced several other designs in the past in D format without any problem (tried a while ago with a different design of PDF and it worked fine).  Looking for ideas...

  In which case it is important:

  * Wireless printing

  * The PDF file size is 1.30 MB (spools up quickly to 13.4MB/15.7MB then crashes)

  Thanks, Jeff

  Hi Jeff,

  Thanks for your reply. Maybe you are not understood my message. First update you the firmware from the link below: Driver and Firmware through EWS and follow the instructions.

  Latest Firmware: Version - AXP2CN1623AR; Date - August 1, 2016; Size of the file - 24.7 MB

  Please share your firmware version. who is now in your printer.

  The printer settings printer Goto and information on the internal use print printer page them you can find the firmware information, or also through printer EWS.

  Firmware can not uninstalled process.

  Thank you
  Rashed

  I'm not an employee of HP, but I am an engineer @ HP Partner and I share my knowledge of my own time.

  If your problem is resolved please click the button "accept as a Solution.

  If my answer was helpful, please click the 'Thumbs Up' to say 'thank you '.

• N600 Time Warner issue

  Hello!

  I bought and used my N600 with Comcast year last year in Chicago, with no problems. I moved to Dallas yesterday and tried to get my internet set in place. Hooked upward, called Time Warner (TWC) to give them the MAC address, but we couldn't work (even if Netgear and TWC claim only he I compatible). They say they can see that everything is active and seems perfect for their purpose, we tried factory reset the router, but can't make it work. They want to send me one of their modems/routers. I can connect to the router via an Ethernet cable and wifi, but when I try to access the Internet, nothing comes through. Looked at the router site, through engineering, but couldn't understand how to operate. Any advice?

  We had previously tried to do a factory reset, but that did not work.

  But I have an update - the Time Warner Cable modem/router came, I plugged it called TWC, they turned on, I was able to connect to internet, I plugged the N600 and then asked them to check the MAC address, it took a few minutes but started working.

  Maybe it was a question of MAC address, but I think that there is something that they have turned on their end.

  Thanks for your help!

• New E260v2 will not charge.

  I just opened the box, plugged in the charger to the unit and he jumped into a USB key and left for 4 hours. As I watched the ressemblee battery bar he was charging for 5 minutes then turned to white.

  Four hours later, I unplugged the unit and received a warning of low power and stops. I thought that it was not in all the way in so I made sure the connection was tight and left for 3 hours. Come back later to see the same result. I'm doing something wrong, or I got lucky with a lemon?

  If it's a new v2, the device may be trying to connect USB MTP.  If it doesn't happen, it's going to get distracted from load.

  To resolve this issue, open a window of Windows Explorer on your PC by pressing [Windows key] + E, or go to my computer.

  With the window open, slide the HOLD switch on the e260 right (orange will broadcast).  I'm sure your Sansa is OFF at this point; If not, press and hold the menu / button power for 15 seconds, then release.

  Press and hold the< button="" down="" while="" plugging="" in="" to="" the="" usb="" port. ="" don't="" release="" the="" button="" until="" the="" sansa="" says="" "connected"="" and="" it="" pops="" up="" in="" the="" windows="" explorer="">

  If all goes well, you will see the Sansa as two flash, listed under devices with removable storagedrives.

  We have an MSC connection at this stage, and the Sansa should be load: look for a wheelchair battery icon and a small Flash.

  Let the Sansa load for a few hours, if you see the lightning bolt.

  Once the battery is charged, you can unplug it and see if the unit remains powered.  Be SURE to slide the HOLD / LOCK switch to the left, or it will say "system shutdown".

  Turn on your new Sansa and try to browse.  Select some of the sample songs and see how it plays.

  The next step is simple: go to settings > Info and read the first listed line.  You will need to update to firmware version 03.01.16, as long as the list of existing firmware starts with a 03.  So, what does say?  If your firmware is 03.01.11, you most certainly need to update, because these devices lack the option of USB mode in the settings menu.

  IF you have a later version, you can check the USB setting by going to settings > USB Mode > Auto Detect / MTP / MSC.

  The next step will be to establish a MTP connection if you plan to use your Sansa with any files with DRM, such as Rhapsody, Napster, Audible, Overdrive, etc..  If you have multimedia not protected in your plans, all you need to do is update your firmware through this thread.

  You have just learned how to connect your Sansa MSC mode manually, which allows the update.  Close the player, slide the HOLD switch and plug everything in now the<>

  The reason most likely that your device was not the plug-in initial has been a break in the pipeline of the PSG.  Media Transfer Protocol is the method of default login of a whole new e260v2, if she older firmware.

  A few words about the PSG: Microsoft protocol requires a minimum of Windows XP and Windows Media Player 10 (WiMP11 is better).  Otherwise, after the passage in MSC mode, you can run your Sansa very well!

  Let us know if the problem is an interruption of the connection of the PSG.  We can then go that route.

  Bob

• Cisco Wireless router model WRT120N guard give up Internet connection

  My wireless router will work for 6-8 hours, and then remove the connection to the internet.   I switch the modem and the router several times to re-establish the connection.  I'm also using a Netgear Access Point.

  I use:

  Charter high-speed Internet

  Motorola Modem

  Model Cisco WRT120N router

  Parameters

  Mixed-mode

  Channel Auto width - 20 MHz or 40 MHz

  Security - Personal WPA2

  Disabled SSID broadcast

  Firmware Version v1.0.04

  Automatic connection Type - Conf DHCP

  Beacon interval - 50

  Fragmentation threshold 2304

  RTS threshold 2304

  All other settings are default.

  When I unplug the modem to the router and plug it on the desktop I have internet service.

  The connection is also falling only on wired or wireless?

  Try to update the firmware on your router.
  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• WRT54g to loss...

  Well, after a hibernation of storage, I had internet at the new House and hung the wrt54g ol'e, did a master reset and return to the factory default. My wired connection works fine, but wireless. See the router wireless computers and I even managed to do work with some tweeked settings advanced wireless security. As soon as I try and implement WEP or WSA, NO GO. None of the laptops in the House can use the net, but they are connected and show a strong signal to the router, I have played with this thing all day and would like any suggestions... I read each step by step of installation I can find, im using the keys encrypted for security settings but not wireless internet... Help please

  Try to update the firmware on your router.

  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

  Change wireless settings. Change the SSID to create a new wireless network. Change the channel to 11 wireless.

  Change the security mode to WPA Personal. Enter the password of the wireless network.

  Now try to connect to the new network wirelessly on your laptop.

  If it is connected to the wireless network, then check the IP address of your wireless computer.

  How wireless and wired computers you have?

  Who is your Internet service provider?

• E3000 and external HD problems

  Hi all

  I just plugged my e3000 and had all set up but when I tried to plug in my external 320 Toshiba HD to the usb port on the router, I get a series of flashing lights on the router and my wireles network almost immediately goes down. I checked the Admin tab on the router configuration page and I can confirm that upnp is "enabled."

  I called customer service and they have suggested that there is a hardware problem with the router itself since normally all drive hard usb should work fine when it is plugged. Before going through the process of taking the router back, can someone confirm that this is a hardware problem? Customer support just told me what was in their manual and most of the time I'm okay with that, but I want to just make sure there isn't some other causing an incompatibility or setting that I should check if it works. Advice would be greatly appreciated.

  Thank you!

  Try upgrading/re-Flash the firmware on your router.

  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Message from DynDNS WRT120N abuse

  Hi there, I'm having some difficulties with my Linksys WRT120N.

  I have a dyndns account and as configured in the DDNS section.

  I didn't install local DynDNS client, only the Linksys router should update the dynamic ip address.

  The first day, everything worked fine: the investigation period has been updated (manually, say 3 to 4 times and maybe the router itself did - I do not know he has done many times).

  Now DynDNS sent me an email indicating that I have abused their service... (for the record: the url still works fine...)

  The DDNS tab says that DynDNS recorded the abuse.

  We never saw it? Should I update firmware (currently v 1.0.01 - default)?

  The router updates the IP regularly (as in: with standard intervals)? Or only when ip address changes?

  I just put on the newspaper...

  Thank you!

  I think that the router updates the IP address on a regular basis with standard intervals.

  You can try to update / re-flashing the firmware on your router.

  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.