Desktop Pavilion needs port IEEE1394 dv cable

Similar Questions

• Pavilion 550-a137c: power adapter for desktop Pavilion 550-a137c

  Hello! I need a power adapter for desktop Pavilion 550-a137c. It requires an x 64 watt, v 11 b with a special plug adaptor. Where can I get one?  Thank you!

  @Jbgss, welcome to the forum.

  Because the computer is only a year old, you should be able to do it here.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Desktop Pavilion a 1110n: CPU is not supported

  PC can't run windows 10 because the CPU is not supported, and the PC doesn't have enough RAM (512 MB on PC), they have not said how much I need RAM.

  .. .thank you for your reply... what I mean, is that because my CPU is old I will not be able to update to 10 Wdos, I understand about the lack of RAM, but it seems that the only way I'll be able to upgrade to 10 Wdos must but a new computer, if this is the case someone please notify me that he don't no way than my current Desktop Pavilion a 1110n purchsed in 2005 does not accept windows 10 download free... Thanks in advance for your consideration and response...

• Dell U2414H and Display port to DVI cable

  Hello.

  Have a U2414H monitor I need to connect to a Dell T1700 purchased with a videocard of Nvidia K2000 added. I need to use the connector of the video card. 2 display ports will be for an another U2414H monitor and a HDMI TV for meetings. I have a Display port to DVI cable and I try to use it from the Dell U2414H monitor and am out of luck. I can't seen to find info if DP supports the U2414H monitors to DVI cables. Has anyone else got it to work? I tried the DVI port on the PC with HP monitors and they worked. Any ideas are greatly appreciated. Thanks in advance.

  Output DVI on VC > DP cable DVI > entry DP on monitor

  The U2414H has the following ports =.
  DP in
  CDM in
  DP on
  HDMI in
  HDMI in

  The K2000 has the following ports =.
  DVI - I DL
  DP
  DP

  A video card DVI port cannot convert to the DP/CDM monitor via a single cable. What you bought was designed at the downconvert a video card DP/CDM to a DVI monitor. You can buy a DVI to HDMI:
  Computer DVI K2000 graphics card on--> cable DVI to DVI--> converter --> HDMI to HDMI Cable--> monitor HDMI in

  -OR-

  K2000 DVI graphics card on--> of computer--> monitor HDMI DVI to HDMI Cable to

• Desktop Pavilion Elite e9240f update my current H-RS880-Μatx motherboard

  I've been slowly upgrading this desktop computer.

  I thought it was the safest way for a novice to replace and not to build a new.

  The motherboard is not the integrated graphics card.

  Desktop Pavilion Elite e9240f

  Recent updates
  
  Radeon HD6870

  16 MB OF MEMORY DDR3 1333/1066

  Caviar Black 2 TB SATA III 7200 RPM 64 MB Cache

  Caviar Green 2 to SATA

  Updated HP SuperSpeed USB 3.0 PCIe x 1 card

  Specifications of the motherboard

  FOXCONN ALOE Version 1.01
  North Bridge AMD 785 G revision 00

  South Bridge AMD SB700 revision 00

  CPU AMD Athlon (TM) II X processor 4 945

  Socket AM3 (938)

  5 PCI

  Maximum capacity of memory
  16384 MB
  Slots 4

  Hello

  A new motherboard verses a new PC is an interesting question.  Develops technology in increments of best financially or is it better to just take the plunge?  Advanced technology has always been more expensive for early adopters.

  Just replace the motherboard involves hardware, license the software in some cases and labor costs. How long this choice will extend the useful life of the technology you use? For example, if the new motherboard is leading edge, then you could spread the costs for adding new technologies to your own model of life of technology.  No matter what you do, it sometimes becomes a viscous circle of technology.  Don't you think that manufacturers use the obsolescence in their business model?

  If you were running a business, you may want to consider the initial cost is amortized over an expected useful life the time (36 months?), then add in the trade in value or resale value to cross the real cost of xx months.

  Back to your original question. Depends on components that can be transferred to the new motherboard and how long they will last before having to replace them.  Building a PC can be more expensive, and then buy a new PC, because manufacturers use the "scale of economies" to produce the same PC at a lower cost. If you're a tech enthusiast, then costs don't matter really that much.  You need to replace a "go faster goodie" with another on your calendar and tithe on.

• Equium U400/146 - I need a replacement lcd cable/Ribbon

  Hello
  Please help I have searched for days.
  I need a replacement lcd cable/Ribbon. Identification number (DDOBU2LC000)

  My laptop is Toshiba Equium U400/146 PSU42E-00400SKS model number. Sound off out of warranty, so I took it to
  my local repair shop, but they could not get the part. The problem with the LCD is that it starts in green
  I can still use the programs, the grays and whites shine through.

  When it is connected to a crt monitor, the laptop is fine. Return to the cable, the screen number is REC-NI3311-LOL. C1

  If someone could point me in the right direction for this part, I would be most gratefull

  Thank you

  Hello

  All laptop parts can be ordered from the local ASP (certified partner).
  I think that guys should be able to order this cable/Ribbon.

  Here you can find the database with all FSA worldwide:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service provider

  Good luck

• I need an i.link cable usb for my sony dcr-hc52

  I need an i.LINK cable USB for my sony handycam dcr-hc52

  Hello DLK!

  Can you please provide your location so that we can better help you find the cable that you are in need of?

  Thank you

  KevinK

• Pavilion a6255.it: page of drivers and software for desktop Pavilion a6255.it PC

  Hello guys. Can you give me official page of drivers and software for desktop PAVILION a6255.it PC? Thank you

  Good noon.  Please find the link below contains the list of drivers for windows vista

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-A6200-desktop-PC-series/3548186/model/3634710

• my wireless was printer was working fine until what I used it to scan - and needed to use a cable for s

  Hi, can anyone help? My wireless was printer was working fine until what I used it to scan - and needed to use a cable to do so. I can no longer print wireless, Iv'e disconnected from the PC to the printer as cable seemed reasonable. What should I do? Thanks in advance

  What printer you are using?

• Pavilion 6710f: upgrade to 3.0 in desktop pavilion 6710f usb ports?

  I have a hp pavilion p6710f desktop that has 4 usb 2.0 ports on the back, & 2 front. is it possible for me to install usb 3.0 ports in whole or in part? or just add them (which would be better)? Thank you!

  You can check your power cables. PIN 4 (molex), looked like this:

  

  What I see on the page product, you will need it IF you use the USB port for equipment that consumes energy high enough. That is to say; external hard drive, smartphones.

  If you are just using the port for a mouse or keyboard, you will not need this.

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• Need help with USB 3.0 on desktop Pavilion 500-214

  I am currently the owner of desktop HP Pavilion 500-214.

  I noticed that the USB 3.0 ports do not seem to work.  Tried with 2 different brands of USB cables now.

  I connect my Samsung S5 with USB 3.0 desktop.  It connects to the 3.0 for a few seconds and then gives the message "cannot connect USB 3.0 devices.

  Does anyone else have this problem?  If so, how to fix?  Or the troubleshooting steps that you might suggest?

  Help, please.  Thank you.

  "So there is no way to use USB 3.0" so it seems.  It is a problem of Samsung and Windows 10 and not HP

  When Samsung found a solution, then it will be OK.

• HP Pavilion 500-277C Desktop P: DVI Port does not

  Second Montor doesn't work-

  I bought my HP Pavilion in November 2014 with two 27xi of HP monitors.  One is plugged into my VGA, the other into my port DVI port.  Well worked, until today.  MY DVI monitor is black.  I swapped the VGA DVI on the back of the monitors.  The issue moved to the other monitor (DVI cable), I checked the Device Manager and 1 single monitor is showon.  I did the updates of the pilot, no help.  When the computer starts, the DVI monitor is a different color and shows no signal, so I suspect the computer.  Thanks for any help.

  Hello

  If DVI does not work then try a known good DVI - D cable.

  As test, just try to use one monitor via DVI.

  Thanks for posting on the forum.

• HP Pavilion p6520y desktop PC: need help to upgrade my ram

  I have a HP Pavilion p6520y Desktop PC model #: WW636AA with a FOXCONN 2 92 motherboard, AMD 785 G Chipset. I'm currently upgrading my ram of the current 6gbs maximally whatever my computer supports. My motherboard says it supports up to 16gbs (since I am running Windows 7 64 - bit), and I'm trying to figure out what I should update.  I scanned my pc on Crucial and they gave me a bunch of suggestions, but I still don't know what I should buy.

  Analysis of the computer on the essentials: http://www.crucial.com/usa/en/scanview/65CC1E0131D926C3

  HP computer specifications: http://support.hp.com/us-en/document/c02179806

  Card mother: http://www.findlaptopdriver.com/foxconn-2a92-mainboard-specs-742010h517p/

  Is it smart to upgrade to the maximum ram and what type of memory should I update? In addition, my computer can even support 16gbs of ram? I have receieved conflicting information about it and I need to check the info I got is correct. I will include a picture of my computer listing of Speccy.

  There are a few suggestions on crucial, such as the Crucial Ballistix Sport 8 GB Kit (4GBx2) DDR3-1600 UDIMM LP or the Crucial Ballistix Sport 8 GB Kit UDIMM DDR3-1600 (4GBx2) or 8 GB Crucial Kit UDIMM DDR3-1600 (4GBx2) and so on. (I don't know if you can see the recommended memory when you view my scan. I guess you can, but might as well include some of them that I'm interested in.)

  Here are the specs of the computer of Speccy:

  

  

  

  Thanks for the help in advance!

  The funny thing is, I was about to buy this one right before I posted this, but I just wanted to see what others thought and if I'm right that my pc supports this amount of RAM. Thanks for the suggestion and response

• Pavilion 22-H010EL: need to replace the cable SATA in my AIO, can't find the right

  Hi all, I have a problem with my 22-H010EL AIO HP Pavilion TouchSmart.

  The hard drive broke twice while PC was covered by the warranty; now the warranty period is over, and the hard drive broke again. I guess that there is a power supply problem, in fact I see the hard drive has boots more than I actually received; Sometimes I hear a sound of boot clearly while the PC is on (and I'm sure that's not because of the stand by, because it happens while I use it). Also, just after the first replacement of hard disk, it showed 7 boots upward in an hour; I guess the power/SATA cable is damaged, the origin of the problem described, but it could be the motherboard, too.
  I would like to replace the cable to see if it works, I really hope he does it; Thanks in advance for any response.

  Hello! @korer621, thanks for the reply.

  You can find it in any computer store or you buy it on all Web sites online.

  Make sure you order the same part number.

  Let me know if you have any other questions!

  Have a great day!

  Please click "accept as Solution" If you feel my post solved your problem, it will help others find the solution.

  Click on the 'Bravo, Thumbs Up"at the bottom right to say 'thank you' for helping!