do I need to nojutoko.dll or gemomume.dll?

Similar Questions

• Receiver error message: "" Ultra driver would need UM_EMDL. "» "DLL", printer installation.

  Original title: Ultra driver would need UM_EMDL. DLL

  I have a badge printer (ID Pro) and it allows to install the printer whenever I plugged into my computer. Now, I get an error message indicating
  «"Ultra driver would need UM_EMDL."» DLL", I searched all files on my C drive and cannot locate this file.  Don't know why it is missing.

  All the advertised 'free' pilot of fixation and the registry fixing software so far has not proven to be free. Any suggestions?

  Hi LucindaGreene,

  1. What is the exact brand and model of the printer number?

  2 Windows operating system you are using?

  You can try the following steps and check if it helps:

  Method 1:

  Uninstall the printer and reinstall it again.

  Step 1:

  If you use Windows 7, to remove the printer, follow these steps.

  a. open devices and printers, click the Start button, and then click the Start menu, click devices and printers.

  b. right-click on the printer you want to remove, click remove the deviceand then click Yes.

  c. If you cannot delete the printer, right-click again, click Run as administrator, click Remove device, and then click Yes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you use Windows XP, you can delete the printer from the Device Manager drivers or Add / Remove programs.

  Step 2:

  Follow this link to install the printer.

  Install a printer

  You can also visit the printer manufacturer to download and install the latest version of the printer drivers.

  For Windows Vista, refer to the article:

  Add or remove a printer

  Method 2:

  You can also try running the fix it and check if this may help:

  Printer in Windows problems

• Need to frontend.dll for 64 bit TestStand 2014

  Hi all

  I get an error during indexing, I think I changed something in the directory then it asks x64\frontend.dll file that I could not find anywhere.

  I found frontend.dll for 32 bit, but not for 64 bit.

  I also tried to uninstall teststand 2014 and install it again. Same problem, I directed to

  Need Suggestions

  Thank you

  You might have a custom version of FrontEndCallbacks.seq in your public directory? If so, it is perhaps where it isn't finding the 64-bit version. You should be able to copy from the installation location to C:\Program NIUninstaller Instruments\TestStand 2014\Components\Callbacks\FrontEnd as far as your custom version is in your public directory. Or remove your custom so FrontEndCallbacks.seq you do not use it.

  Hope this helps,

  -Doug

• Error trying to copy "system missing or incorrect. Need original Windows DLL WNASPI32. DLL.

  Original title: Bad or missing file

  I get an "incorrect or missing system. DLL

  Need original Windows WNASPI32. DLL

  When I want to copy something. How can I fix it

  Hello

  1. what operating system is installed on the computer?

  2 have you made any changes to the computer before the show?

   

   

  There are several different ways that wnaspi32.dll errors may appear on your computer.

  Wnaspi32.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation. The context of the wnaspi32.dll error is a key piece of information that will be useful while solving the problem. As such, please post the exact error message.

  Run the System File Checker command to replace the copy of the file wnaspi32.dll missing or damaged.

  Reference:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

   

  http://support.Microsoft.com/kb/929833

   

• need file ksuser.dll on my pc

  my computer seems sto Miss file ksuser.dll - How do I get it?

  Hello

  · You receive an error message or error code associated with ksuser.dll missing file?

  · If so, when you receive the error message?

  · It is when you work with a program or a particular application?

  · Were there any changes made on the computer before the show?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

• Need to fix dll errors on start.

  I get the error messages like zprsimtb.dll and qt5widgets.dll can not install when I start on Windows 7.

  I was getting errors of memory because the memories made their appearance, causing shut downs of programs and requiring a reboot several times a day.

  I would like any suggestions how to solve this ongoing problem.

  It seems that if your computer is badly infested with malware.

  Start by doing a free scan online at http://www.eset.com/us/online-scanner/

  Then download, install, update and run a full scan with the FREE of MalwareBytes AntiMalware version--> http://www.eset.com/us/online-scanner/

  The malware is preventing you to install MBAM, try to download and install MalwareBytes Chameleon--> https://www.malwarebytes.org/chameleon/

  Restart, then present the State of your system.

  If you still get an error message when you restart, please provide the full text of the message.

• need names of .dll files that contain icons

  I have win7 Home premium. I'm looking to change an icon for one of my pieces of freeware. Philippe, when I go through the process of 'change icon' I get only one choice, which is the icon even in use. I used to have a couple of files .dll residues many icons, but I lost them. "I used GOOGLE to find something on the files .dll holding icons and encuntered a suggestion that many files in C:\WINDOWS\System32 .dll ' are containers for icons. This turns out be a useless response. When I navigate to a .dll file (there are many of them) with the "change icon" shows, I get a msg of error indicating that the file in question contains no icons. Can someone provide a list of the .dll files that contain icons actually?

  The only other would Netshell.dll

  Not sure if that's what you're looking for.

• Need new version DLL File of speech

  Dragon Naturally head told me that windows speech DDL is version 2.0.210208 and I need the 4.0.4.2512 version for naturally Speeking to run correctly how can I fix this problem?

  See if there's an idea here: http://search.yahoo.com/search?p=version+4.0.4.2512+for+Naturally+Speeking+&ei=UTF-8&fr=hp-pvdt

• need for zlib1.dll on win64 - marchandises7?

  Hello
  I try to run tiffdump, a downloaded executable win32 from http://gnuwin32.sourceforge.net/packages/tiff.htm useful for the spill of a TIFF on my marchandises7 win64 machine.
  I get the following message "could not start this program because zlib1.dll is missing on your computer. Try and install this software to solve this problem. "(in fact this message in French, so it's my literal translation).

  Therefore, my question is: is this on a win64 marchandises7 zlib1.dll? It is necessary and if so, how could I solve this problem?
  My internet survey provided a Pareto software sales tool, zlib1.dll Repair Tool, which is not a "fair" solution

  Thanks in advance for your help
  Emmanuel

  You are welcome.
  Please mark as replied to close the message.

• Need DLL for Windows 7 64 bit

  Hello

  I use the USB-6501 to control an attenuator.  I wrote the driver to work with Windows XP, but now that I'm trying to use it on Win 7 64 bit, it causes an error.  At first, it complained about not having studio C++ 2008 (we had 2010), and we have fixed.  Now, it seems to complain about the DLL.  I talked about the NC, and they think that we need a different DLL for Win 7 64 bit.  Can someone tell me where I can get the DLL?  He settled in the System32 directory if I install the latest driver for Win 7?  Any help would be greatly appreciated...

  Thank you

  Steve

  I found the new version (nicaiu.dll) DLL in the System32 directory, when I installed the updated for Win 7 64 bit driver and copied to my local directory.  I also copied the new nidaqmx.h file on to my local directory.  I always get the following from MatLab error message:

  Loading nicaiu.dll...

  ??? Error using the ==> loadlibrary to 365

  Failure of pre-wet the input file.

  Output of the preprocessor is: 'cl' is not recognized as an internal or external, order

  operable program or batch file.

  Error in ==> USB_6501_driver at 38

  funclist = loadlibrary('nicaiu.dll','nidaqmx.h','alias','myni');

  Any help would be greatly appreciated.

  Thank you

  Steve

• pop continues to come say need to copy files DLL cache to run right-how can I do this?

  can someone please? KEP getting a po - up that says that I need to copy DLL files hidden so that windows runs correctly. How do I do that?

  go to start > run, type cmd. Press ok, in the command window, type sfc/scannow

  you will need your xp reinstallation cd. You will get a prompt asking you to put in it, and he'll start check your files and copy those required. It will take some time. In addition, if you run a registry cleaner, keep not delete the dll files. !!

  I hope this helps.

• need to file dplay.dll play doom collectors edition, where I get it or what else can I do

  I have recently upgraded to windows 7 ultimate 64 bit and I try to install programs I had on my old computer. I like the misfortune I can play my doom 3 on here, but not my collectors edition. I can install it but when I go to play it it says I need a dplay.dll file there is no file in the software, it is compatible with xp, but I can not play on here what I do? where I get it. or what can I do else. Oh I also have the file defined to run in xp mode.

  Hello

  What is the full and exact error message?

  I suggest you to follow these steps and check if it works.

  a. navigate to the location C:\Windows\System32.

  b. find the file dplayx.dll.

  c. make a copy of the file and name it to dplay.dll.

  Let us know if it helps.

• Simulator FMS does not work saying needed D3DRM.dll

  Original title: needed D3DRM.dll

  I installed a program, simulater FMS, which must have D3DRM.dll installed in order to operate. I am using Windows 7 and have service pack 1 installed also I Direct X 11 also I thought they contained that file dll but I cant find it.  How to get it and put it in the program?  Thanks in advance... highvolts

  Thank you Manu, in response to questions 3:

  1. it is not a Microsoft Simulator, is a FMS
  2. He never worked on my computer because he needed the D3DRM.dll file in order to operate.
  3. the recent change of software added this simulator on my computer.
  Thank you for your answer, but since I downloaded the file from the FMS web site and installed in the simulation software, which now works fine, I won't need extra help.  Thank you again for your quick response... Michael

• Call dll error 1097

  Hello

  I'm reading the data from a capture card in my slot PCIe card. When I call the "Initialize" function from the .dll file that I got with the card, I always get error 1097. 1097 means that the called function threw an error. When I run the program supplied with the acquisition card, the acquisition card still works.

  If I have everything just omit the "initialize" function call and continue with the function that will be called after the "Initialize" function, LabVIEW block (program stops without any warning).

  I also had a LabVIEW program that uses the dll that was supposed to work. But here I get the same error.

  Do you have any idea what normally causes this behavior and how can I solve this problem?

  I have the second post of nathans. 1097 error is almost always an error in the configuration of the right to call library node. And in some cases, there is no right to set up and you need a wrapper DLL to convert between what the library node call allows and what needs your DLL. The reason why it works sometimes and other times not, actually is that it never really works, but sometimes the error that gets caused cannot be detected by the operating system and LabVIEW does not get an exception according to. This can change according to LAbVIEW version, runtime system or development and even recompilation of the code after the small seemingly unrelated changes in demand.

• Unable to get copy of targeting DAQmx.dll 4.5 / / the type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced.

  I inherited a software project that uses the NationalInstruments.DAQmx.dll library. I currently have the 13.0.40 32-bit version of the library. I rewrite the 64 bit .NET 4.5 and have found problems when you use the 13.0.40 version. Namely the two errors below

  Error    1    type 'NationalInstruments.ISupportSynchronizationContext' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 13.0.40.190...
  
  Error    2    type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 13.0.40.190...

  Research mistakes online, I think that the problem is that my current DAQmx.dll is the .NET 4.0 framework and my new project target .NET 4.5.

  I went on the Web site of NOR and downloaded the NI DAQmx 15.1 "Downloader" (found here http://www.ni.com/download/ni-daqmx-15.1/5617/en/). This executable, once executed, then downloads ~1.7GB compressed files, once unpacked there are a large number of software and current documentation. After speaking with an engineer application OR on the phone he asked me to launch the NI DAQmx setup in the top level of the unpacked files folder. He then installed what I would call the Suite OR software... (Front flip, after I did an uninstall, the uninstall program me notified that I'm removing 224 pieces of software.) So why I call it the Suite OR).

  After installation, I was tasked to search for a similar folder installation directory to MStudio / / DAQmx / / DotNET / / assemblies / / current for the new version of the DAQmx.dll but only found dll starting with NationalInstruments.Common and anything ending with DAQmx. I also did a search on the full installation for the dll directory and found no NationalInstruments.DAQmx.dll. I decided to try the . Common.dll suggests that the naming convention may had changed, nothing helps.

  (Just some extra info) Finally, I went to the machine that has the old version of the Suite OR on it (I develop on a separate computer from the one using my instrument NOR) and looked under the same folder I mentioned above. Under this folder I locate a NationalInstrument.DAQmx.dll if this is the one I currently use. I also find a 64-bit version of the 13.0.40 dll, which is nice, but still has the same problems as the 32-bit version.

  So I guess my questions are now

  • Do I have reason to think that I need a newer dll? The one with the XX naming convention. XX.45 (15.1.45, I hope)?
  
  
  • If so, a DAQmx.dll who target 4.5 is of NEITHER?
  
  
  • If it does not exist, where can I find it? ...

  Well, I think I have mislead you again NYC. It seems that my problem has not been resolved. I tried all the libraries for each version, Measurement Studio from 2010 to 2013.

  The folder structure I have is as follows.

  \MeasurementStudioVS2010\\DotNET\\Assemblies\\Current\\NationalInstruments.DAQmx.dll
  \MeasurementStudioVS2010\\DotNET\\Assemblies\\15.1.40.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2010\\DotNET\\Assemblies (64-bit)\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2010\\DotNET\\Assemblies (64-bit)\\15.1.40.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies\\15.1.45.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies (64-bit)\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies (64-bit)-15.1.45.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2013\\DotNET\\Assemblies\\15.1.45.61\\NationalInstruments.DAQmx.ComponentModel.dll

  Obvious all directories not marked 64 bits fail because they are not 64-bit. Directories marked 15.1.40.61 do not work gives me the original error. because they target DotNET 4.0. Under the VS2013 directories are not NationalInstruments.DAQmx.ComponentModel.dll only NationalInstruments.DAQmx.dll. Directories marked with 15.1.45.61 highlighted give the same error, namely

  Error 1 the type 'NationalInstruments.ISupportSynchronizationContext' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version =15.0.40. 49154...

  Which I guess means that the name of the 15.1.45 directory does not coincide with the 15.0.40dll version. Am I misunderstanding this error, or am I wrong that the dll under 15.1.45 are not what they are labeled as?

  For reference, here are two snippits of code I'm trying to do work.

  using (NationalInstruments.DAQmx.Task analogWriteTask = NationalInstruments.DAQmx.Task (()) new / / errors arise here using task
  
  {
  
      String [] channels = DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AO, PhysicalChannelAccess.External);
  
      analogWriteTask.AOChannels.CreateVoltageChannel (channels [1], "aoChannel", MIN_VOLTAGE_OUT_THEORETICAL, MAX_VOLTAGE_OUT, AOVoltageUnits.Volts);
  
      AnalogSingleChannelWriter writer = new AnalogSingleChannelWriter (analogWriteTask.Stream);
  
      writer. WriteSingleSample (commandValue, true);
  
  }

  
  

  using (NationalInstruments.DAQmx.Task digitalWriteTask = NationalInstruments.DAQmx.Task (()) new / / errors arise here using task
  
  {
  
      String [] channels = DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.DOPort, PhysicalChannelAccess.External);
  
      digitalWriteTask.DOChannels.CreateChannel (channels [1], "port1", ChannelLineGrouping.OneChannelForAllLines);
  
      DigitalSingleChannelWriter writer = new DigitalSingleChannelWriter (digitalWriteTask.Stream);
  
      writer. WriteSingleSampleMultiLine (commandValue, true);
  
  }

  EDIT: So the real problem is that I have not included NationalInstruments.DAQmx.Common.dll in my project.